12 583 modeli
This is a cool lamp. Maybe a gift. This is easy to print. This is an eye catcher. This takes about 2 days to print. This is a #3dp design. “So many people enjoy this print. The idea that my lamp has thousands of sisters around the world…
Źródło oznaczyło ten model jako treść 18+.
Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like these:…
Projectvideo: https://youtu.be/SNWnS3XnjX8 I have been experimenting with a breakaway wingtip to improve on the silhouette of my design to match the real F14 better, while still being print-in-place and articulated. The wingtip breaks of…
A new design inspired by the wind and sand of our planet (and other planets to). Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the…
~ Design collaboration with Azurefilm ~ A nature inspired plant pot! We hope you enjoy it as much as we did design it! Used Filament: This model was printed using Sage HS Matte PLA from Azurefilm. The Azurefilm team was so nice to send us…
A simple mosaic inspired geometrical plant pot for your house plants! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
I designed this silica gel container mostly for two reasons: I looked at several different silica gel containers and even printed a few but always found something I was not entirely happy with (I most likely didn't look at every single…
iPad Halter in einem geschwungenen Design. Auf den Bildern ist der Halter mit einem 12.9 Zoll iPad Pro zu sehen. In der Mitte habe ich den Halter ausgenommen, damit mit dem Finger der Bildschirm nach oben gestreift werden kann. Der Halter…
A nordic run symbols inspired plant pot. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a lower layer…
FAST PRINT - Single Wall Basket Weave - NO SUPPORTS The Problem: All baskets and lids with grid-like perforations result in long print times If you've printed such a basket you'll notice that the printer spends the majority of its time…
Thanks to https://www.thingiverse.com/STTrife for posting this, i wanted some variations that were larger and fit the existing locking locations. These are printed and can be stacked with existing storage boxes. See his excellent write-up…
A simple but playful design inspired by the small patterns of paws pressed on fresh concrete. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for…
with this nozzle you get circular flow in the pool instead of just straight in. It helps to keep the pool clean.
This is a Flexi Plesiosaurus. There are two types: star pattern and blank. You can 3D print whichever you like. Print in Place with no supports. Please take pictures of your Flexi and share them with us! Print Settings Printer Brand: QIDI…
The Ultimate First Layer and Adhesion Calibration I designed this model to test several calibration and adhesion aspects like for example: Nozzle Offset Adhesion Roundness Small-feature performance Also it gives you an indication for…
A plant pot inspired by the perfect structure of bismuth crystals. Used Filament: This model was printed using Brass High Gloss PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the pleasure to review…
A lovely gift from the bottom of your heart. A plant pot fit for Valentine's Day. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger…
(Description in german below // Deutschsprachige Beschreibung folgt unten) Inspired by the design "Funnel and bottle base for Elegoo resin by antcam" (on Thingiverse) I designed a new, slightly modified version. Main difference is the…
A desiccant canister designed to be mounted in the center of a spool of filament during storage to help keep the filament dry. The canister has a lock-ring which threads onto the opposite end from the cap, after the canister has been…
To celebrate our new president's election, we created a bust of Petr Pavel. There are two versions available. A casual in a flannel shirt and a formal one in a suit.
A modern approach to the wavy style plant pots with the use of parametric settings. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…
A lot of you have requested that so here it is - a regular pattern Paw Pot design! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger…
An easy to print vase mode design inspired by the famous companion cube from Portal 1 Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…
Look there is a zebra in the wild!… Oh no, it is just a plant pot. But it looks amazing! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…
Tired of pistachio shells making a mess? This smart 2-in-1 container is the perfect solution. Designed with a clever dual-compartment system, it keeps your snacks and shells separate: the top holds pistachios, while the inner compartment…
A handy resistor lead bending tool designed for quick and accurate forming of through-hole resistor legs. 🔧 Includes: A 6.3 mm spacing slot – ideal for standard 1/4W Arduino resistors A 10 cm gap – useful for larger power resistors or…
A simple seashell inspired plant pot - it is a part of the seashell collection available in our club. https://www.printables.com/model/748447-seashell-collection-plant-pot-vase-and-bowl-vase-m Print information: Recommended vase mode or…
You might also like: https://www.printables.com/model/280185-design-reference-radius-ruler-innerouter-1-to-12mm In the computer everything looks huge, but in reality 1mm could be enough or may be too flimsy depending on what you’re trying…
A simple yet beautiful science design inspired by the looks and vibes from the atomic-punk game - Atomic Heart Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send us some…
Remixed with bottom chamfers for better bed adhesion. No supports needed Fits new AMS ribs. Use a rubber band to hold the sides together Original model by @muddtt had fillets, which was a pain to print with ABS and other materials…
This is my take on a segmented vaccum hose. It is parametric and can be adjusted within quite a range with very basic FreeCAD knowledge. The 3mf and gcode files here are for a segmented hose with approx. 40mm inner diameter. The inlet…
This is a part of the Botanical Collection available in our Printables Club. A geometrical design inspired by plant ornaments and crystal structures. Very easy to print and looks great in modern interiors! Print information: Recommended…
A new parametric model inspired by the structure of big rock formations. Used Filament: This model was printed using Gunmetal Matt PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the pleasure to…
A simple wind flow inspired plant pot. Used Filament: This model was printed using Aircraft Grey Matt PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the pleasure to review this filament, and we can…
Swimbait Fishing Lure mimicking the appearance of a minnow (lambari). This lure boasts an exceptional level of detail, featuring intricately modeled scales, lifelike fins, and a stunningly accurate gill area. What sets this lure apart is…
We are for sure big fans of crystal structures here! So… Here is our newest model inspired by the great growths of Moon Crystals! We hope you enjoy it! Used Filament: This model was printed using ROSA 3D PLA-Silk Navy Blue The ROSA 3D…
An interpretation of a cell-based robot organism. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a lower…
This is the 2022 version 5 of the MiSTer Multisystem enclosure. For printing the enclosure, please read the included PDF - how to print guide. Multisystem is brought to you by Heber ltd and RMC Retro. If you have any technical questions…
Some new fireworks are in the sky! Falling stars and such are to be seen! So, we wish you all a Happy New Year already! Used Filament: This model was printed using ROSA 3D PLA-Silk Gold The ROSA 3D team was so nice to send us some samples…
Introducing a table-top paper towel holder featuring an intricate Voronoi pattern, designed for multicolor printing. This holder is both stylish and functional, adding a unique touch to your kitchen or dining area. Profile details : No…
UPDATE: The "remix_drip_bracket_7.2" version (shown in blue) fits better and centers the build plate over the resin vat better. I will remove the earlier version to prevent any issue of downloading the wrong file (earlier version shown in…
Welcome to Adudino: (One of) Your Gateway (s) to 3D Models Get exclusive and practical designs. Model Info A neat design bin to help keep your desk or other makerspace tidy. An exceptionally handy little waste bin for on your kitchen…
Here is a watering can I designed in Fusion 360. It is designed specifically for 3D Printing as it has no angles over 45 degrees. The handle has also been taken into consideration as it would not be easily 3d printable so I decided to…
While thinking of new ideas we realized that we never made a Flower flowerpot! So... We made one! We hope you like it! Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send…
A simple geometrical design inspired by the amazing Matrix movies! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
A simple yet elegant plant pot inspired by the glamour style of the early 20's. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger…
A pot crafted by accident that turned dark… Nah it is just a regular plant pot, but it looks pretty cool! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer…
A simple design inspired by modern lamp shade structures. Used Filament: This model was printed using Off-White HS Matte PLA from Azurefilm. The Azurefilm team was so nice to send us some samples of their filaments, and we had the…
A small desiccant Box with 1mm wide gaps and a sliding opening. 90 x 45 x 19.8mm (Base) 90 x 45 x 13.5mm (Short)
A plant pot inspired by the Kumiko style wood decor theme. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended…
Join the E-Nable association and offer a 3D printed hand to children! Rejoignez l'association E-Nable et offrez une main imprimée 3D aux enfants! https://e-nable.fr/…
Why should I use this desiccant container? It's sized to fit into any spool from .5kg and up. It uses much less desiccant while also maximizing the water absorbing surface area. The desiccant can be rapidly dried in a microwave,…
A simple plant pot inspired by a gaze upon a vast wheat field with no end. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Este es un juego de ajedrez completo para impresión 3D , diseñado desde cero en FreeCAD con un enfoque paramétrico , limpio y funcional. El proyecto incluye los archivos fuente originales de FreeCAD , lo que permite modificar fácilmente…
I've released a new, improved version of this container. Check it out here . Note: this model MUST BE PRINTED IN VASE MODE . If you print it in normal mode, you're just going to get a solid cylinder. This is a desiccant container designed…
Small stars twinkle in the sky, as they do each day every day. So inspired by that we created a new pot design! Merry Christmas and Happy Holidays! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top…
50mm diameter by 70mm tall desiccant jar (with screw on lid) that prints fast in vase mode and has TONS of air flow. There are even interior channels that allow for air from the perimeter to penetrate into the middle of the jar for…
This is the low poly design of the modular lantern LR2268. It builds the project’s base and contains the frame, lid, pole and foundation. Use these with one of the side panel prints to create a small candlelight or a complete lamp with a…
A beautiful design storage container. Easy to print! The dimensions of the box are 140x110x60mm. Print instructions Printed with 0% infill at 0.20mm layer height!
Allow your treasured handbag to take a break in style with our beautifully crafted Portable Purse Holder Hanger Hook. Perfectly designed for use on any table or surface, it keeps your purse handy and clean while enhancing the aesthetic of…
Why couldn't a screw be also a plant pot? It for sure can! Used Filament: This model was printed using Gunmetal Matt PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the pleasure to review this…
REMIX RC1 RC2 RC3.1 shield face protection from Prusa without any hole to do in the shield and compatible with any 150 x 150 printer (medium model) REMIX: https://www.thingiverse.com/thing:4233193…
Fun dangling flip flop earrings with a multi-color print utilizing filament changes. Excited to see what color combinations you choose! Size up or down but watch the size of the post hole. We included the gcode for a set. But feel free to…
A design inspired by the soft structure of butterfly wings. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended…
Better top mount system for the Prusa MK3 or MK3S. Low resistance roller reduces resonance of the spindle rocking above your printer. Easy to replace the filament and it holds the filament spool straight! Holds 1 KG rolls perfectly. I…
I made a cut waste collection container for my wives BabyLock Desire3 Overlock Coverlock machine. The waste bin fits perfect between the edges of the machine and hold it wile sewing.
Gewürzschaufel zur einfacheren Entnahme aus Gläsern und Beuteln. 4 verschiedene Ausführungen angelehnt am Design der Ankerkraut Gewürzschaufel, aber mit besserer Außenkontur passend zum Innendurchmesser der Gläser. Kleine Version:…
I'm finally moving away from gallon ziplock bags and storing my filament in 20qt Sterlite gasket boxes. I needed a bunch of (at least a dozen) desiccant boxes, and while there's tons of models out there, they're not exactly efficient to…
Be careful with chainsaws! But... this one might be pretty safe to handle. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
I wanted a desiccant holder that would fit inside a filament spool. I found a lot of models that used holes or vertical slots to allow air to pass through. I don't like printing posts as it takes longer to start and stop for each one. I…
Let me know how many levels your printer reached !!
APOLOGIES to the first dozen or so people who viewed this. I uploaded an error that is now fixed. I've printed now the “Lego Lightsaber Hilt (Human Scale)" by ReProps several times. This model addresses a couple little issues I had with…
Hello there! As I was upgrading my manufacturer sound system in my BMW E46 I noticed the original speaker covers killed a lot of the sound. After some research speaker covers with honeycomb design turned out as a good choice, as its…
Gears are spinning! Engineer's pot is here! We hope this gear like style is something you will enjoy! Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send us some samples…
An elegant and functional hair stick designed for creating both quick and intricate hairstyles. The model features a minimalistic and elegant design . Its lightweight construction allows for easy and secure hair fastening without causing…
I originally designed this canister to hold my Flexcut carving set. But I quite like this model actually and want to use it for a bunch of other things. It's kinda shaped like a chunky peanut butter jar… and will look like one too if you…
Gerändelte 12V Zigarettenanzünder Abdeckung Designed für Skoda Octavia - natürlich auch universell einsetzbar. Mir gefiel am Ende die Version mit mittelfeinen Rändeln (Version “mid”). Tip: Einen guten Alu-Drehteil look erzielt man mit…
I wanted a desiccant holder that would fit inside a filament spool. I found a lot of models that used holes or vertical slots to allow air to pass through. I don't like printing posts as it takes longer to start and stop at for each one.…
Keep pests at bay with this 3D printable, wall-mountable, carnivorous pitcher plant. Mount by your garden table, vegetable patch, or window box using the integrated fitting. Fill with a sweet liquid (such as water mixed with jam or the…
A plant pot inspired by the intricate structure of a slide projector. Used Filament: This model was printed using PLA Mineral Natural from Fiberlogy. The PLA Mineral series is our all-time favourite! The amazing texture of the finished…
The original model was available thanks to the University of Dundee Museum Collections. Original scan available here with CC0 Public Domain license: https://sketchfab.com/3d-models/brown-bear-skull-e01dc94d20df4b888c7a6979bffb45a9 This…
A simple and practical brick line holder that stays in place using the tension of the brick line itself — no screws, nails, or adhesives required.Perfect for masons, DIYers, or anyone needing to stretch a straight line when working with…
An under-desk drawer with a rail that can be mounted under your desk with screws or adhesives. There are 6 holes with a diameter of 5 mm on the rail part for screws, or you can use adhesives if you prefer. The drawer body may need some…
My take on the hubs needed to make a geodesic sphere. I made this sphere to act as the outer cover for an RGB LED light ball. Essentially, I want to make a big ~60cm RGB snowball winter decoration. My plan is to wrap this sphere in cling…
Highlights: MERV 13 filter maintains a good airflow rate while capturing the majority of particulates. HEPA 13 is available for extraction applications. Reusable cartridge uses low-dust coconut-shell activated carbon. Can be used as a…
A simple modeli showing wave cancelation. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a lower layer…
A Christmas themed plant pot for a cozy Christmas time! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a…
This is my entry to the Sindoh Christmas Decorations Spare Parts - Design Challenge . In keeping with the theme I've created spare parts to repair Christmas ornaments. We've all been there. Ornaments that have a lost cap and/or hanger (I…
This box boasts a textured knurled surface for an enhanced grip and features a print-in-place hinged lid, offering both convenience and security. Measuring 115x45x42 mm with a 2 mm thickness, this product provides two model variations…
This is my very minimalistic design of a five-point star decoration. I created this and other similar designs like table and gift wrap decorations. Printed in various colours and sizes, it is a wonderful eyecatcher sprinkled in the middle…
A simple cover for the Mars 4 Max resin vat. Comes with full cover or in-place cover with cut-outs for the screws. The red plastic UV shield does fit with this cover installed. Let me know how you get on, this is my first functional…
Deprecated as of 1/11/2024: I have no longer use or recommend this model. This is what I use now. This model was great when I lived in Colorado it was all I needed because it only got humid when it would rain. But after I moved I found I…
Ce modèle permet d'égoutter le surplus de reine après impression, pour ne pas en mettre partout en enlevant votre pièce imprimer. Ce modèle ce clipse sur le bras de fixation du plateau. ( De la même manière que le support bobine de la…
Print directions | PETG material recommended but any material works fine, recommend 0.2 mm layer height or less for smoothest results on the angled edge. Easy print, no supports required.
Diana of the Ephesians Diana of the Ephesians, also known as Artemis of Ephesus, was a goddess worshipped in the city of Ephesus on the west coast of modern-day Turkey. The cult of Diana was one of the most important religious…
Printing instructions: Magnet encapsulation in PrusaSlicer is accomplished by pausing the print before the layer that covers them : Slice the 3mf file according to your preferences. Scroll to the first layer that will cover the magnets.…
This tool allows you to simply transfer a residue from one resin bottle to another. In addition, you can also use it with a filter funnel, the small hole on the side lets air through and facilitates the flow of resin.
Ukrainian Folk Design Santa Skull Ornament.
This desiccant block fits the rubbermaid 21 cup containers. It has strong walls so it can support 1 Kg spools easily. Print Instructions: YOU MUST FOLLOW THE PRINT INSTRUCTIONS!!! Print using ZERO top and bottom layers (REQUIRED.) Use 45…
![Ornament Cap and Hanger - Christmas Spare Parts [Shindo Design Challenge]](https://media.printables.com/media/prints/496290/images/4041262_829f322f-285c-47f9-ae74-f4a91e3f6da7/ornament_on_tree_wtext.jpg)
