Liczymy pasujące modele…
Also check the model out on MakerWorld for BambuLabs printers print-profiles! Update 6th May 2023: Thanks for the great feedback everyone that downloaded and made this model! I finally had time to make a new version. I've added a few…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
The containers are in sizes 5x5 / 5x10 / 5x15 / 5x20 / 5x25 / 10x10 / 10x15 / 10x20 / 10x25 / 15x15 / 15x20 / 15x25 / 20x20 / 20x25 / 25x25 / 30x5 / 30x10 / 30x15 / 30x20 / 30x25 / 30x30 cm. All are available with a smooth, designed…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
A remix of mistertech's headphone holder with a reversed cord holder. Works on desks up to 40mm thick.
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
I first posted this on Thingiverse on 1/23/2022. A couple of copies were posted here as original work (without attribution) and were taken down, so I've decided to also post my original design here. Print using 0.4mm line width and no…
Wydruk około 0,69 €–0,85 € nettoWstępna wycena jednego wariantu
I'm a big fan of the “dumpster fire” theme. So being able to have a functioning dumpster on my desk is fun. On my work desk, I find it handy to stash thumb drives, yubikeys, lip balm, pencils, etc. Right next to my printer, I find it…
Wydruk około 4,32 €–5,27 € nettoWstępna wycena jednego wariantu
Since I love this test for calibrating new printers and couldn't find it on prusaprinters.org, I uploaded it here. Please note, this is not my work! Autodesk and Kickstarter have developed a common standard that enables people to assess…
Wydruk około 3,62 €–4,42 € nettoWstępna wycena jednego wariantu
Simple under-desk headphone holder. Uses minimal material and is easy to attach with screws. Fits up to 30mm wide headbands. Print instructions: 3 perimeters Detect thin walls
Wydruk około 1,28 €–1,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an easy to print, cheap, and if I may say so, attractive way to ensure that you never again have to burrow through piles of PLA offcuts to get to a pen or pencil. With 3 different sizes of module available, you can create a desk…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
Here is one idea that considers environmental issues. I made an eco-friendly garbage bag holder using a plastic bag. You can brush dust off by hand because it is under the side of desk. The thickness of the table that can be attached is…
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
I had the USB extension lying around but I am 95% sure that it is this Monoprice item . I printed mine in PETG only because it was already loaded in the printer. PLA would be fine as well. I included 2 files, one with just the bare model…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Modified version with snap-in friction fit. No screws or threading required. The fit is a little bit tight to make sure that the feet doesn´t come lose by accident. Update: The locking tabs were a bit too tight for modern motherboards…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Here we have a centuries old art of Zen Gardening. This design includes the tray, rakes and customary hexagonal stamp. All you need to complete this garden are a couple of plants (I like succulents), sand (from the beach) and pebbles (if…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
🛠 Universal Add-On Drawer for Desks or Shelves – Multiple Variants Expand your storage space with style and practicality! This 3D-printable drawer is designed to mount under a desk or shelf, making it a perfect addition to offices,…
Wydruk około 2,30 €–2,82 € nettoWstępna wycena jednego wariantu
We've been playing with this fortune telling fidget for days on end. Six possible responses for your fortune, but we also just like to play and spin the dice. Print it in your favorite colors, or mimic the magic 8 ball that inspired it.…
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
I wanted to remove the radius overhangs on the print but realised the original STEP files were exports of the STL so I've exported clean STEP files as well as made my minor tweaks. Thread was changed to GL20 thread to hopefully improve…
Wydruk około 4,16 €–5,08 € nettoWstępna wycena jednego wariantu
Just a simple desk stand for the Spotify car thing. Great for use with Desk Thing as well. Prints in just over an hour with the PrusaSlicer “Draft” profile. Made this quickly as I found Spotify car thing to be a useful device to have on…
Wydruk około 1,85 €–2,27 € nettoWstępna wycena jednego wariantu
The 6x version contains six pieces with modifiers for 100% infill in the shaft part to be tapped and grouped together for printing. The 1x contains a single unaltered foot. I tapped mine with ISO M3 thread but 6/32 UNC or even threading a…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
This is my solution for a splash Free Water wheel for 3dprintys fountain. Print the holder and wheel with supports. They are easy to remove.
Wydruk około 6,01 €–7,34 € nettoWstępna wycena jednego wariantu
I came across this model on Facebook and grabbed it off of Makerworld. Original author had a different set of cutouts. I filled back in the basic shape of the organizer and made specific cutouts for the tools that I had on hand.…
Wydruk około 34,34 €–41,97 € nettoWstępna wycena jednego wariantu
Update: STL now available , I recommend to print the gcode as it is optimized but if you can't print the gcode you can load the STL in your slicer and try this way. I also add a 3mf with the settings to print it from the orca slicer.…
Wydruk około 2,08 €–2,55 € nettoWstępna wycena jednego wariantu
Lids for DeskNano x300. Supports pretty much any cooler. Cutout and Mesh styles. Mesh is a slicer based technique. To create the "Mesh" effect, just set top & bottom layer height to = 0, walls to 2mm, infill to 15%. Then experiment with…
Wydruk około 3,44 €–4,20 € nettoWstępna wycena jednego wariantu
Cable organizer for under the desk A simple solution to get rid of the cable clutter. The end can be bent open to insert the cables. Please print in PETG with at least three perimeters and no support.
Wydruk około 1,11 €–1,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Beskar Ingot: Mandalorian: Star Wars Print standing upright for best details. Textured on all sides.
Wydruk około 3,49 €–4,27 € nettoWstępna wycena jednego wariantu
I was looking for a stable desk mount for my Unifi G3 instant cameras that could be elevated more than the existing models I found. After printing the nanoHD DeskStand from BradleyB, I was impressed with the stability and desided to remix…
Wydruk około 4,31 €–5,26 € nettoWstępna wycena jednego wariantu
This Urban Green Energy HoYi model has been modified to be printable and mountable for display and experimentation. The model has been equipped with a 8.3mm mounting hole to smoothly accept a wooden 5/16 inch dowel. This model was…
Wydruk około 9,29 €–11,35 € nettoWstępna wycena jednego wariantu
Modification of the desk organiser without sd card slots. Original model by Sisul Desk Organizer by Sisul | Download free STL model | Printables.com
Wydruk około 13,05 €–15,95 € nettoWstępna wycena jednego wariantu
https://cad.onshape.com/documents/40d51bf297adf9ff085f1347/w/89f6cf7b46e7ffc898b86539/e/e9b1dbad4eb93cf131bb9408?renderMode=0&uiState=6371440cd2b56a532bb9f445
Wydruk około 20,06 €–24,52 € nettoWstępna wycena jednego wariantu
Update 2: 8/2/2022: Success! I no longer consider this effort a work in progress. This design can really work great once you get it assembled and know what to do to get it running excellent. It is very satisfying to watch it start itself…
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
These clips are desgined to fit to a 15mm thick desk. Feel free to send me a message if you need any dimensions or features changing to better suit your set up :) I found that printing the clips up right with supports and a raft (settings…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
These are some bracket designs for holding a Master Cooler QUBE 500 PC case to the underside of a desk. This is ideal for people like me, who have an already cluttered standing desk and don't like cables reaching to the floor. There are…
Wydruk około 9,15 €–11,18 € nettoWstępna wycena jednego wariantu
English A school desk in Playmobil style. Printing guide Printable without supports with default settings. My own settings are visible in the project file (3 tables were printed in the project). The project file is ment as an example.…
Wydruk około 2,10 €–2,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Arduino code on GitHub: https://github.com/SRRychter/Cloud.git
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
✅ Nike Swoosh LED Lamp – Wall or Desk – Cable Hidden Version A clean, modern LED lamp in the shape of the iconic Nike Swoosh . Simple to print and easy to assemble. Ideal as a desk accent or wall decoration using a bit of double-sided…
Wydruk około 1,76 €–2,16 € nettoWstępna wycena jednego wariantu
Folding puzzle map of the Czech Republic divided into regions. You can adjust the size in PrusaSlicer - I adjusted it to 150%. Later I will add the option as a blind map without names. I see the use in education for children in the first…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed the holder to store my apple magic keyboard under my desk. To be able to easily adapt the holder to other keyboards I have uploaded the design files as well. I used double sided tape to hold the two parts in place.
Wydruk około 3,96 €–4,84 € nettoWstępna wycena jednego wariantu
A desk mount for the VPC WarBRD Base from Virpil. This mount turns the joystick base 90° from its normal mounting position, so the base isn't protruding from the desk so much. You should be able to mount it on a desk with a thickness from…
Wydruk około 1,23 €–1,50 € nettoWstępna wycena jednego wariantu
A convenient hook for your headphones that attaches using existing fixtures to FlexiSpot EF1/EG1 standing desks. How to Attach Remove both of the M6 screws from the top of the leg on either side of the desk. Then replace the screws with…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This desk organizer includes a clock, calendar, pen holder, and compartments for paper clips and small notepads. Notepads with a size of 90 mm x 90 mm can be inserted. Instead of a calendar, a nice picture could also be used, for example.…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Another brilliant way to take up even less space on your desk with your hp elitedesk 800! [works on G3 but should work on G2-G6 – lemme know if otherwise] Enjoy! ***Edit*** I've redesigned it from the ground up. it now uses less plastic…
Wydruk około 3,76 €–4,60 € nettoWstępna wycena jednego wariantu
Large nut captured on threaded rod that you can move back and forth to keep your hands occupied. Printable at 0.2mm layer thickness
Wydruk około 2,35 €–2,87 € nettoWstępna wycena jednego wariantu
Replacement for original EUR coin holder for the Kreator KRT691301 cash box - https://penzo-naradi.cz/kreator-krt691301-prirucni-pokladna-eur Dimensions: 273 × 109 × 20 mm Divided into two parts (p1, p2) so it can be printed on Prusa. Two…
Wydruk około 8,92 €–10,90 € nettoWstępna wycena jednego wariantu
An under-desk drawer with a rail that can be mounted under your desk with screws or adhesives. There are 6 holes with a diameter of 5 mm on the rail part for screws, or you can use adhesives if you prefer. The drawer body may need some…
Wydruk około 1,37 €–1,68 € nettoWstępna wycena jednego wariantu
3D printed table clamp for cable management Cable Management : They guide the cables, preventing them from tangling and cluttering the workspace. This helps in maintaining an organized and clean workspace. Device Stability : They prevent…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
A laptop under desk mount top shelf supports a 28mm laptop and bottom shelf supports a 30mm laptop. Has side cutouts to allow power and USB-C connections.
Wydruk około 8,44 €–10,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
2025-01-31 UPDATE As noted in the comments, this snap-fit increases the risk of breaking a hinge on the dumpster. I recommend pressing in toward the edge of the dumpster so that it doesn't stress the hinge in a direction that is…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
Organizador de escritorio
Wydruk około 18,47 €–22,57 € nettoWstępna wycena jednego wariantu
Update : *Spool Mount parametric Design added. -Just change the id and od of spool mount in FUSION 360 and design will update. (see photos for more information) This is the Super organizer for your nightstand or desktop. No hardware…
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
10cm wide, 14cm tall, 11.7cm deep. Pros: Keeps all your useful tools upright, for maximum space efficiency. Space for a scraper, filament snippers, pliers, tweezers, pens, and a little indented bit for small things like USB adaptors.…
Wydruk około 15,58 €–19,05 € nettoWstępna wycena jednego wariantu
I spend the last few days designing and developing a simple mount for my Anker PowerPort 6 USB charger because it took away too much space on my desk. So I decided to attach it to the side of my wooden desk. To design it I used Autodesk…
Wydruk około 1,40 €–1,72 € nettoWstępna wycena jednego wariantu
Desk mount for a Anker PowerPort Atom III Slim Charger to be mounted under the table. The main goal was a tight fit for easy cable plugging and unplugging without any wiggling. Edit I made this model because there was none when I first…
Wydruk około 2,97 €–3,64 € nettoWstępna wycena jednego wariantu
I have printed this stand in PLA. To save some time, I used a layer height of 0.3 mm for most of the print. However, for the first 5 layers, I used a layer height of 0.2 mm to ensure a better adhesion to the bed. I also used an infill of…
Wydruk około 2,72 €–3,32 € nettoWstępna wycena jednego wariantu
Design is fully done in fusion 360, done during a live twitch as an example Simply print both components, and easy assemble by screwing it in place. I used 4 perimeters to ensure sturdiness, printed out of lime green PLA prusament. EDIT -…
Wydruk około 6,32 €–7,72 € nettoWstępna wycena jednego wariantu
If you want to put your Unifi Bullet G5 on a table or shelf instead of a wall, this is for you. The print is technically two files, the cone stand model provided here, combined with the ring with the provided elsewhere mount. This is just…
Wydruk około 2,91 €–3,56 € nettoWstępna wycena jednego wariantu
Halteklammern für Netzteile zur Untertischmontage. Anhand der Skizze können die Bemaßungen in Fusion 360 geändert werden (Breite und Höhe des jeweiligen Netzteiles) und die Konstruktion wird entsprechend angepasst. Bestes Ergebnis mit…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Desk holder/stand for all WordClock 2024/2025 ( 16x8 and 16x16 ) models in case you want to lean your WordClock 2024/2025 a little bit back on your desk, sideboard or low board. =) With the shown big printed screw you can adjust the angle…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
This is a remix of Eco-friendly deskside trash bags holder by rin_ofumi that replaces the original screw with a thumb screw. Since I move the holders often, this allows for install without a screwdriver.
Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Use this pair of brackets to mount a power strip or other accessories to the underside of your Uplift desk. It can be mounted to the desk frame crossbar's threaded holes with M8 x 10mm cap screws. The difference between the -1 and -2…
Wydruk około 1,13 €–1,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Apple Magic Keyboard and Trackpad Desk Stand V1
Wydruk około 4,25 €–5,19 € nettoWstępna wycena jednego wariantu
Simple hook for hanging your headphones on your Ikea desk
Wydruk około 1,53 €–1,87 € nettoWstępna wycena jednego wariantu
This is a desk led lamp , no supporte needed , no glue needed. 🔒 Usage Notice This design is for personal and non-commercial use. Its use for commercial purposes is not permitted, neither in digital nor physical format. 📩 If you wish to…
Wydruk około 8,15 €–9,97 € nettoWstępna wycena jednego wariantu
Prostý 3D model loga PČR, vytvořeno jako dárek, třeba se bude někomu hodit.
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
Designed for the LM Show 2024 Christmas Community Print Drive.
Wydruk około 3,50 €–4,28 € nettoWstępna wycena jednego wariantu
A variation or original minimal design.
Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu
Quick headphone hanger designed specifically for Uplift Desks (25mm thick) Buy me a coffee :) - Thangs - Thingiverse
Wydruk około 1,74 €–2,13 € nettoWstępna wycena jednego wariantu
Under desk mount for FiiO headphone amplifier (E10K, E10K-TC, etc). A tab allows the amp to be retained in place, but still easily removed when desired. All of the amp's ports and controls remain accessible when the device is mounted.
Wydruk około 2,00 €–2,45 € nettoWstępna wycena jednego wariantu
If you have a Flexispot standing desk and headphones, give this hook a try! It mounts using the existing bolts in the top of the desk leg (fits both left & right sides). The original model wasn't wide enough for the strap of my…
Wydruk około 1,93 €–2,36 € nettoWstępna wycena jednego wariantu
I have a custom desk in my office built on an Uplift adjustable frame. This headphone holder should work on standard Uplift desks as well. I designed to fit my two needs, the Apple AirPods Max that I use for work and recreational…
Wydruk około 5,26 €–6,43 € nettoWstępna wycena jednego wariantu
used photo of original hook as canvas, look to RMTB for original files, i will remade thread too, probably, as original snaps when overtighten edit: just uploaded remake of thread insert, rotate hole toward hotplate in slicer, it was…
Wydruk około 0,18 €–0,23 € nettoWstępna wycena jednego wariantu
Turn the record player to maximum speed and watch the carousel spin. Go back in spirit to your youth listening to the Sex Pistols or the brass band.. No supports needed. * Roztočte gramofon na maximální otáčky a sledujte jak se kolotoč…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Did you know Fusion 360 has a built in slicer! 13 infill sample swatch cards for Autodesk Fusion 360 slicer. Gyroid, Rectilinear, Star, Honeycomb, Squares, Spherical, RhombicDodecahedron, ElongatedDodecahedron, TruncatedDodecahedron,…
Wydruk około 1,31 €–1,61 € nettoWstępna wycena jednego wariantu
This is a quick print which doesn’t need anything else than a marble or another small ball. The files are already on the correct orientation for slicing, or alternatively just grab the ready .gcode files. Note: The handle is a tight…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
This is a snug fit for the Clarett/Clarett+ 2Pre (including its rubber feet) and the latches hold the interface firmly in place. So it's no problem to plug in/out an XLR cable with one hand. Yet, after disconnecting the cables on the…
Wydruk około 5,58 €–6,82 € nettoWstępna wycena jednego wariantu
Room for a Little bit of everything, for a clean desk
Wydruk około 22,65 €–27,69 € nettoWstępna wycena jednego wariantu
Miniature Giants Causeway desk model. Print the base in green for grass or blue for sea. Recommended slicer settings Base: In your slicer rotate it to print upright on the long side nearest to rocks, see picture. This will give you the…
Wydruk około 2,05 €–2,51 € nettoWstępna wycena jednego wariantu
Hey! This Christmas I was thinking of a gift for my sister who likes stained glass art and I figured I'd give a shot to modelling and printing a lamp mimicking the classic Tiffany lamp. There's not much to it, you might have to get a…
Wydruk około 1,02 €–1,24 € nettoWstępna wycena jednego wariantu
I have created the "Vesken Tag" a tag clip-on with a QR code and a filament sample slot. Scan, order, and go. You can of course use it for anything else like print settings etc. For the labels, I used my label printer.
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
Found I needed a stand for the mobile while video conferencing, but the stand I had was a little too small for the weight of the phone. The result is something which is substantial enough to also be able to hold a tablet/ iPad. It…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena jednego wariantu
Deadpool riding a Unicow and it's a desk organizer!!! Three part print; main part is three colour - please see included PDF for very important additional info. Print all three parts and glue carefully together. Please hit the like ♥and…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena jednego wariantu
I experimented with many wall thicknesses, angles and radii, until I found the optimal design for modern smartphones. The design features ribs on the surfaces which come in contact with the desktop and the smartphone. These create…
Wydruk około 3,90 €–4,77 € nettoWstępna wycena jednego wariantu
Organizers for tools, pens, SD cards, micro SD cards, and USB drives.
Wydruk około 10,46 €–12,78 € nettoWstępna wycena jednego wariantu
Just a quick design to hold my heltec board. You can use the 4pc. M2 screws & nuts which come with the board (but a bit longer screws 6-8mm would fit better), so no additional parts are needed.
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
Tiskací písmena české abecedy s diakritiými znaménky, která jsou pevně spojená s písmeny. Tisk je dvoubarevný. Do výšky 1,4 mm tisknuto průhledným filamentem (nebo bílou barvou), dále barevně tak, aby v konečném vzhledu vyniklo celé…
Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu
Předělaný nadstave na český TIC TAC GUN. / A modified extension for the Czech TIC TAC GUN.
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Gcode included for PLA 0.4mm. If you print correct way up no supports needed.
Wydruk około 0,25 €–0,31 € nettoWstępna wycena jednego wariantu
Made a holder for my tools used when I'm mesauring for CAD-work. Slots for all kinds of measurement tools and storage devices. If you're lucky, yours will fit too! Printed in PLA, no supports.
Wydruk około 6,44 €–7,87 € nettoWstępna wycena jednego wariantu
Office Organizer Holds pens, pencils in main compartment. Holder for your scissors in the back and business cards in the front. with two side pockets I use for white out and a pencil sharpener. Updated in June 2024 I decided to come back…
Wydruk około 11,72 €–14,33 € nettoWstępna wycena jednego wariantu
Stopping plates for T12 soldering station under desk hanger I found these pretty under desk hangers from maco2229 which I wanted to use. But my KSGER T12 soldering station's and SMD rework station's face plates are flush with the rest of…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
If you want to put your Unifi Bullet G5 on a high shelf instead of a wall, this is for you. The print is technically two files, the cone stand model provided here, combined with the ring with the provided elsewhere mount. This is just a…
Wydruk około 2,45 €–2,99 € nettoWstępna wycena jednego wariantu
Simple yet effective under the desk mount for DC adapter delivered with PSVR2 PC adapter. Snug fit so it will not move easily.
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
This remix is based on VegaWoodWorks's LED James Webb Galaxy Desktop Display , which is beautifull but too big to be printed on a Prusa printer. This remix contains STL files made to fit on a i3MK3S+ bed. The biggest part is 19.5 cm x…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
you will need an additional m4 bolt, a pen cartridge and a rubber band to build this toy. It is best to put the rubber band over the launch arm instead of around the pen cartridge as shown in the picture to prevent the layers from…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Malé vyprošťovací desky v měřítku 1:10. Velikost XL : 35x137 , průměr díry 3,2mm Možnost kombinování s kanystry. Možnost přidělání na zadní držák kanystrů.
Wydruk około 2,20 €–2,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed to be a small compact solution for my desk. Helps to keep all the tiny things around my desk in a more manageable. Definitely cleaned up 90% of my desk and I know where things are most of the time. Includes the STEP Files.…
Wydruk około 9,38 €–11,47 € nettoWstępna wycena jednego wariantu
It's the STL Version of Model: 792989 It originaly was a 3mf and can't be sliced and printed on every printer. Now: Converted via Orca slicer to STL sliced for Anycubic Kobra 2 Plus in Highspeed with PLA ----- Es handelt sich schlichtweg…
Wydruk około 15,05 €–18,39 € nettoWstępna wycena jednego wariantu
Desk variant of my “ Charging butler / iPhone + Watch + AirPods Pro wall mount charger ”. Charging butler / Apple iPhone, Watch, AirPods Pro desk charger with Apple “Standby Mode” support in iOS 17 and with integrated 65W power supply to…
Wydruk około 2,17 €–2,65 € nettoWstępna wycena jednego wariantu
/////////////////////////////////////// ENGLISH /////////////////////////////////////// Desk clock with ePaper display with discreet lighting and automatic time synchronization over WIFI. You need to print at least the front part and the…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This Modern Retro Style Desk Clock is easy to print and looks great in any colour combination, and it's also easy to assemble. I printed all the parts as listed below and this will be reflected in the g.code. Otherwise use the STL files…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Tired of cable clutter on your new desk? This 3D-printed grommet is perfect for organizing your workspace! Designed for IKEA EKBACKEN countertops but it should fit other countertops (even if with a couple of adjustments), it features a…
Wydruk około 2,70 €–3,30 € nettoWstępna wycena jednego wariantu
Om kabels netjes door een kast of bureau te laten geleiden. Er zijn verschillende maten op het gat terug bij te vullen. Ook zijn er verschillende klokboorgaten. 51mm-5mm-64mm en 76mm. For neatly guiding cables through a cabinet or desk.…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
This is a simple set of corner pieces for stylish extension arms for a lalmp above any workbench, desk, countertop,… The corner pieces are connected with aluminium 15x15 square tubing and a cable way is included in the diagonal piece.…
Wydruk około 6,14 €–7,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
![[Tilted Down] Unifi G3/G4/G5 Bullet Desktop / Table Stand](https://media.printables.com/media/prints/a937bdac-e56f-493a-b968-8521c652944a/images/9718041_768568ff-aa3d-4967-b1e4-64f11437c0f5_3dff804c-2b22-4d95-8fb7-38b0fbe5502e/pxl_20250509_164903612.jpg)
