Wyniki wyszukiwania: fast

Fast-Printing Modular Drawer System (Vase Mode)

Hi Everyone: I originally posted this design for a fast-printing modular drawer system on Thingiverse, but quite a few people suggested that I also post it Printables (I can see why. Printables runs so much smoother and the support is…

Bed scraper - fast print 15min - minimal filament usage 3g

Print in PLA so you dont damage the printbed. Check out the new larger model at: https://www.printables.com/model/291609-bed-scraper-mk2-8g-25min Still uses only 8g and prints in 25min. Print instructions Click print =)

Fast-Operation Vise

UPDATE 2022-11-02: A number of people have reported that the clips are a little too thick to insert without a lot of force or sanding. I added a version of the clip that is 0.6mm thinner. It is named ThinnerClip.stl . You may wish to…

Fast-Print Mobile/Cell Phone Stand (Vase Mode)

This fast-printing phone stand has been specifically designed to print in ‘vase mode’ (and 0.8mm line width) to allow for very fast printing and low filament usage, whilst maximising strength and stability. Key features: Very fast to…

FAST Print In-Spool Desiccant (Silica Gel) Container with Hygrometer

FAST PRINT - Single Wall Basket Weave - NO SUPPORTS The Problem: All baskets and lids with grid-like perforations result in long print times If you've printed such a basket you'll notice that the printer spends the majority of its time…

Tripp Trapp Stokke Chair + IKEA Trofast plastic storage box combo (v4)

https://www.buymeacoffee.com/maxt ---------------------- UPDATE 22nd Mar 2023 : The model has been updated to v4. A complete rework based on Tripp Trapp Trofast Clip (metal basket) . That model gave me the idea, that it's much better to…

Parametric woodworking marking-gauge /w fast-lock

This is a marking-gauge for woodworking purposes to mark the same measurements against different edges. I found some existing marking-gauges around but wasn't able to adapt them to my ruler measurements. So I decided to make my own in…

Super fast silica gel desiccant spool container - vase mode

About I really love original Silica gel spool container by @gdrag. However I wanted to achieve Three additional goals: Make a spiral (vase) print to reduce filament and time, Add some distance between side holes and internal wall of the…

angels and bells - hangable Christmas ornaments - fast print (11-28 min)

Folding Christmas decorations inspired by paper cutouts from school years. Used PLA and PLA+ filaments. Printed on Original Prusa MINI+ with standard PLA preset without any problems. Manual filament change required after the second layer…

Tripp Trapp Trofast Clip (metal basket)

The clip is being used to mount an IKEA TROFAST (42x30x10cm) metal basket to a Tripp Trapp. The clip will not work with the TROFAST plastic bins. I have the 4th Generation Tripp trapp at home. I think it should also fit on the 3rd…

Fast & Easy Cable Organizer

Fast & Easy Cable Organizer A fast, clean, and practical solution for managing messy cables on your desk, in your bag, or while traveling. Designed for a quick and effortless print! 3 Sizes Included: Small: Perfect for thin standard…

Small Fast Test Cube - Small Fast Calibration Cube 1cmX1cm 1g of filament! 0.5m!

Small 1cmX1cm test and calibration cube Fast to print (10min) (0.5m, 1g) With many tests on it: Calibration 1cmX1cm or 0.4inX0.4in Overhang test Quality test Half sphere test Bridging test Bed adehision test Stringing test Small details…

Rope Rap (like a TyRap, fast and strong)

The super simplicity of a Tyrap / Tie-Wrap / Zip-Tie translated to use with a rope. Ever hung up a clothesline or something else hanging from a tree on vacation? Always that fiddling with tying the rope and untying it again at the end of…

Fast stringing test

Another stringing test, prints fast, requires little filament. Prints in 10-15 minutes.

Benchmade 62 balisong butterfly knife M3 fasteners

First Layer Calibration Squares! Fast Easy Print!

I made these three "Custom First Layer Calibration Squares" to help you dial in your perfect first layer. When printed properly they will come out as a solid single sheet of plastic. Its a fast easy print! .20mm Layer Height Single Layer…

Tiny Toy Blaster V2 (6mm Airsoft Toy Gun) No Glue, No Fasteners: Just Rubber Bands and Prints

Summary Dinky little toy blaster. it shoots about 30 feet, is pretty small and is made out of purely printed plastic and two rubber bands (One for the trigger and one for the magazine). It requires no fasteners, or glue, and just uses…

Festool FastFix Centrotec holder

Festool FastFix Centrotec holder - simplify your tool management Where do you currently store your FastFix Centrotec adapters? Print your own Festool FastFix Centrotec holder and make your everyday work easier and more productive. Don't…

PARKSIDE X20V_Team Battery connector with Faston terminal

Update: v1.1, July 27, 2021. Model slightly uppdated to suit other of my output connectors. Sliced with 0,15mm layer height. A pdf file added: Parkside battery system.pdf, (placed under Download package). This is one of my first printed…

HexScraper fast (18mins 0.6mm / 27mins 0.4mm)

Please compare the first photo with your slicer before printing. Make sure that your scraper head underside looks like photo 3. If it takes longer than 36 minutes to print, then something is wrong with the slicer settings. Optimized…

Prusa MK3S Raspberry Pi Camera Mount - by Clip-Fastening

The mounting of this bracket is achieved by clip-fastening! The development of this camera mount was inspired by various mounts that can be found on Thingiverse. As it is, none of them was exactly what I had in mind. That's why I decided…

War of the Ring (2nd Edition) Fast setup insert

This is the insert and organiser for the war game The War of the Ring Second edition. ( https://www.aresgames.eu/games/war-of-the-ring-line/war-of-the-ring-second-edition ) With this insert I wanted to solve two issues: Ability to sleeve…

Minimal Cable Clip – Simple & Fast 3D Print

Keep your desk tidy with this simple and practical 3D-printable cable clip ! Designed with a minimalist shape, this small cable holder helps keep cables organized and prevents them from sliding around on your desk. Its compact design…

GT2 Belt Fastener

A reusable fastener without damaging the GT2/2GT (width: 6mm) timing belts.

fast 30 min temperature & bridging tower MK4S HF nozzle

Temperature towers should be fast and easy. I don't want to wait for hours just for a test. This tower is shorter and narrower than most models out there and uses increments of 10C to quickly get you close to the optimal temperature for…

very flat snap fastener - i.e. for wallets or fabric

I contructed this snap fastener / press stud to repair my wallet. After printing, simply sew on with needle and thread. Used it on my wallet for the last 2 month now - and it worked quit flawless. Print instructions I printed with: 0.6mm…

DIY 18V Makita Bosch USB-C PowerDelivery Supply PowerBank Fast Charging Charger

Fix the toroidal inductor with hot glue so that the adapter can withstand vibrations. 2x USB-C Charger PCB with SW3518 Chip: https://de.aliexpress.com/item/4000180424469.html Includes a buck (no boost) converter, so USB-C fast charging…

NVG camera mount for Tactical FAST helmet

Use the screw that came with the camera case. Push the back of the print into the slot and push the front firmly until it clicks and is securely in place. Use the lowest possible layer height and a wall count of 4 for best results (with…

Snapmaker U1 Spool Holder - Fast Minimalist Print - NEW snapText or snapU1 design

🚀 Snapmaker U1 Minimalist Fast Print Spool Holder 🚀 Need to use a third-party spool with an oversized center hole on your Snapmaker U1 but don't want to wait hours to finish printing? This design is for you! The focus here was on speed…

Centrotec holder with fastfix and bayonet lock

Toolholder for wall mounting your festool centrotec and fastfix attachments. If you only plan to hang your centrotec attachments, you can just print the first part. If you plan to use the fastfix part you should print the second part.…

Modular Wallet: Slimfast Edition

Adds an Apple AirTag and space for cash, without adding much in thickness (4mm for the AirTag, nothing for the cash). This remix adds space for an AirTag on the top plate, uses some of the thickness of the bottom plate to add space to…

Dog Poop Bag Holder (fast print)

A simple holder attached to the leash for used bags, just slip the bag into either slot and the knot will hold it! Can be used for multiple bags and as a bonus if you turn it upside down it looks like a dog :D 10% rectiliner infill and 3…

Modified jaws for Fast-Operation Vise

Modified jaws for gripping at an angle. I use them for soldering components to PCBs.

Filament Clip | FlexBow | Print-in-Place Compliant Spool Clip, Fast and Efficient.

🏹 FlexBow Filament Clip A simple and effective filament clip inspired by a bow mechanism . The FlexBow acts like a bow under tension, creating constant pressure against the spool walls while securing the filament. ⚙ How it works Pinch the…

Super Fast Drying Soap/Pad/Brush Dish Ventilated from Below LR2264

This is my design of dish that is ventilated from below. Objects placed in this dish dry fast, as there is an air flow possible from all sides. How to Print the Dish Print the dish with the flat bottom on the print bed. In order to get…

Faster Print, DtM-v3.1 Face Shield PPE for COVID-19

MAKES 2 SHIELDS with a ~1h 20m reduction in print time. NEW VERSION helps for better build plate adherence on the MK3S. I've updated this to drop the print time down to ~3h 40m for 2 on an MK3s. THIS IS A REDUCTION OF ~1h 20m!!!! for two…

Trapped Dice! Fast Print

Printing Settings Infill Density: 20-30% Layer Height Standard 0.2 mm Wall Count 2-3 Material PLA Fan Speed 100% Print Speed 50 m/s Upload makes/comments

Camera Holder of TrueLife NannyCam H32 - faster print

Simple holder for the camera TrueLife NannyCam H32 printed as a single piece. The camera holder is just a cut cup, ensuring a firm grip on the camera. The connected base now has stronger feet to ensure a proper and stable grip, even with…

Bosch Cool (2000)/4000/5000 Fast & Simple Window Hose Adapter (STEP file included)

Background There are a lot of amazing and well thought through hose adapters for mobile air conditioners available, but these have quite long print times. I'm impatient and wanted something which is simpler, uses the available parts of my…

Fast Print fully parametric LED Matrix Cover / Diffusor made in Fullcontrol, tested with: 8x8 16x16 32x32

A parametric LED Matrix diffusor front plate. fullcontrolXYZ based, 100%extrusion, 0 travel, 0 retractions. Extrudes at 0.8mm, which is totally fine for a 0.4nozzle. A bigger nozzle will probably allow much faster print speeds. Prints as…

Verbindungswinkel zum Stapeln von IKEA Trofast Regalen

Einfache Winkel um mehrere IKEA Trofast Regale übereinander zu stellen und zu verbinden. Es können die originalen Schrauben verwendet werden. Kein Bohren nötig. Druckdatei enthält einen rechten und linken Winkel. Pro Etage werden je 2…

Prusa XL fast filament speed loader

Usage, building instructions and materials: NEW !! 2024-10-21 - version 4: experimental new multi-material gears with print-in-place bearing improved design of the main body 1. Usage This is how this device is used to quickly load…

Letter Opener - fast print, no supports.

Recommended print settings: Material: PLA Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: Default as modeled.

Get Precision Square and Round Holes Every Time! GUIDE & Calibration Shape (Super Fast Print for Rapid Iterations)

WHY?! I do a fair bit of massively complex functional prototyping. I used to have to draw a 3.10mm hole to fit a 2.90mm screw if I wanted my 14mm square hole to be 14.00mm. Now, I draw 2.90mm and get 2.85-2.95mm, and get my +/- 0.05mm…

Phone Stand - small and fast to print

Phone Stand - small and fast to print

Fast print case for esp32

A minimalist esp32 case, prints in 11 minutes Update: Added experimental 5m vase mode version of body.

GluBot (Glue-Bot) clip style wall holder (fast connect/release)

Easily clip/unclip your Glubot glue bottle to a tool wall. Attaches with 2 #6 screws. Printed with PLA and 6 parameter layers. Infill shouldn't matter since there will be none. Did use “organic” supports on 40 degrees overhang, but is…

Buckle Strap Clip Fast Lock (compliant mechanism)

Use Standard 3D printing slicer to Build this piece. Other Creations : https://www.instagram.com/leclubsandwich_studio/

Fast Funnel

Originally two lines of openscad I added customizer variables, so you can make whatever size you want. Print in spiral vase mode with no bottom layers. Here is the reason I like openscad here is all of the code need to make this model:…

Fastening hooks for INTEX pool cover tarpaulin

Those who want to winterize their pool or basically just want to stretch a tarp over the pool have certainly already looked for a solution to fix the tarp. These reliable fastening hooks are attached to the vertical bars of the pool with…

Volleyball Netzspanner / Volleyball Netfastener

Ich drucke dieses Modell mit einem Elegoo Neptune 4 und nutze Cura als slicer. Ich würde Fuzzy Skin und Supports empfehlen. I'm printing this model with an Elegoo Neptune 4 and using Cura as a slicer. I would recommend Fuzzy Skin and…

fast printable easter egg dry stand

Who doesn't know that? The freshly painted Easter egg is full of sticky paint and now where to put it to dry? So far we have always used our many egg cups, but the eggs always stuck to them and an unsightly edge remained on the egg. With…

Gazelle bicycle mudguard fastening clip / spatbord klem

This part replaces the top part of a mudguard holder on some models of Gazelle (children) bikes. I hope this helps for someone. This is only the upper part. The part most likely to break. Included is the Fusion360 archive to help you get…

Fast connector for WS2812 led strips without soldering

Practical and fast, it allows you to connect several strips together or create simple joints in curves or decorations, the only limit will be your imagination. For their use You will need: Led strips WS2812 1 x fast connector 1 x clip…

Koncový doraz pro systém IKEA TROFAST (end stop)

Úložný systém IKEA TROFAST vyrobený z mořené borovice neobsahuje zadní dorazy pro výsuvné boxy. Vytvořil jsem tuto jednoduchou zarážku, kterou stačí zezadu nasunout na rám a přišroubovat vruty tloušťky 2mm. Sestavu nemám zavěšenou na zdi,…

Foldable [PMFC] Prusa Mini Fast Compact Mobil Transport Assembling Mod/Kit/Addon for hand baggage

Vor- und Nachteile auf einen Blick: + Verkleinerung/ Kompakter (45 cm x 35 cm x 20 cm) + bessere stabilität der z-Achse + schneller Ab- und Aufbau (Montagehilfe) + einfacherer Ab- und Aufbau ohne Werkzeug + weiterverwendung der…

Bracket / Fastening / Holder for 8mm rod e.g. Kids Flag Mast on playhouse

The bracket can be used to attach an 8mm rod. In this case it is used to attach a flag mast (8mm) to a children playhouse. One bracket has a throughout 8,1mm hole. The other bracket has a bottom/stop. The *.stl is available to adjust the…

Paulmann URail: Smoke Alarm fastening (Rauchmelder Halterung) for smartware

(German below) English: Because I didn't like to screw or glue our new room ceilig, I wanted to attach our smoke alarm onto our nice Paulmann URail lightsystem Trails. For an easy attachment I used the genius but simple hookpart from…

Fast Post Cap for Gate Fence

The cap from the gate post around the pool disappeared. This is a quick fix until a more intricate one can be designed. I wanted this to be as quick as possible so I changed all the speeds to at least 70mm/s. Thoughts?

Action camera mount for FAST/FMA/MICH helmets

Hello, Today I have for you an Action Camera Holder for FAST/FMA/MICH helmets . A great way to attach the camera to the helmet and then easily remove it. The holder fits perfectly into both helmets and camera holders. Be careful when…

Simple Revo Nozzle Holder for Z Axis Top // Sideways or Angled Mount // fast print // 5 Nozzles

Simple E3D Revo nozzle holder for z axis top mount. Can be installed in two positions prints under 1 hour holds up to 5 nozzles Happy printing! NK

Cable Fasteners

Cable fasteners for cables in different formats. 1 x 2 x 1.5mm^2 2 x 2 x 1.5mm^2 4 x 2 x 1.5mm^2 2 x 2 x 4mm^2 All fasteners uses 3mm screws with countersunk head. Prints without support.

Hexbin. Easy, fast, simple, modular storage without a billion DIFFERENT parts to print

Hexbin is a hexagonal bin for your knick knacks and screws and medications and what not. You can literally print a wall in 6 minutes which is about the time it will take you to figure out what to put in it. Updates: 2023-11-24 I totally…

Breakfast Club : Locker Magnet : John Bender

Breakfast Club : Locker Magnet : John Bender. takes a 10mm by 3mm magnet. I may make a series. This would be the Criminal. I think the others are the athele, the princes, the basket case, and the nerd. ill see if there are any stand out…

WOLFCRAFT DOWELLING JIG FASTENING KNOB

It is a fastening knob for wolfcraft dowelling jig part number 4650000. One of mine broken, then model and replace with printed one. Print Settings Printer Brand: Prusa Printer: MINI Rafts: No Supports: No Resolution: 0.15 mm Infill: 90%…

Vase Mode Pencil Box – Fast & Fun Print for Kids!

Keep your kid’s stationery in style with this pencil-shaped pencil box , specially designed for quick, easy 3D printing ! Made for my daughter, this box prints in 5 simple parts , all of which come together to form a realistic pencil…

Artika Sonolok Fastener-Free Hook (Short Version)

After covering most wall space in my workroom with Artika Sonolok acoustic paneling, I sized this hook model to hang prints using the IKEA VISBÄCK poster hanger. The design sits on top of a wood slat, staying in place through friction…

Martha tent fast printing hygrometer hanger

Inexpensive “martha tents” (mini greenhouses) common in amateur mycology often have wire shelving that is a bit to big to set a hygrometer on. This fast print hangs the hygrometer/thermometer from the shelving. These hygrometers are…

Spool holder for dry box, narrow, vase mode, fast print

This spool holder was designed to consume the least space in your dry box by leaving the least possible space between 2 spools. Therefore one more spool might fit into the box. It prints very fast and material saving by using vase mode.…

Mustang fastback 2d Wall art whit wheels

2D wall art of Ford Mustang Fastback 10

Thermometer fast blast chiller

This item allows you to lower the temperature of your thermometer very quickly and effortlessly. Simply insert the thermometer and shake it from the handle provided. I printed this with PLA and 15% infill

Fast Addition Trick

How fast can you add four 4-digit numbers? With these magic rods, you can do it instantly!!! SPOILER: Pick as many rods as you want, to add the four numbers formed by putting all these rods side by side, you just need to “read” the second…

PieBowl FAST <1h

The Pie Bowl is a sleek and functional 3D printable design inspired by the "pie crust" edges of an aluminum pie container. This subtle nostalgic touch is paired with a clean, modern look, making it both stylish and practical. Designed for…

Fastening support - Ericsson SPO

Fastening support for Ericsson SPO 14xx service module card. Print instructions Print Settings Printer Brand: Prusa Printer: i3 MK3 Supports: No Filament: Filament PM PET-G Resolution: 0.15mm Infill: 30%

Ball holder for Evolveo Fast Wireless Car Holder

Spare part for Car holder Evolveo Fast Wireless

ThermoFisher Scientific Matrix 0.5 mL Cryovial Thermocouple Fastener

Developed by the Aquatic Germplasm and Genetic Resources Center (AGGRC), the Vial Thermocouple Fastener (VTF) is designed to securely fasten thermocouples to Matrix cryovials, enabling precise and consistent temperature monitoring during…

Fence mesh fastening element. Gap size is 2mm.

It is made in Fusion 360. I made it myself for a fence, because buying such elements is expensive. The diameter of the fence wire is 2mm. I printed this element with an Anycubis Cobra 2 pro with PETG filament.

Shower Head Fastener

Replacement part for some generic type of shower head fixture from quite some years back. Original, transparent fastener broke, the new one's matching the style of the printed tube caps made here . Reduce layer height in the top layers…

Fast & Furious 1 - Dodge Charger R/T (1970)

You can scale the subject and then split it into multiple prints for print it larger. The template is particularly detailed, if you want remove some or add someone else you can do it by editing the SVG of the project. The subject depicted…

Silica-Gel-box (spool-container, optimized for super fast print)

These boxes are specially designed to be printed really fast and also to have as many holes as possible to let the wet air reach the silica-gel inside. The screw cap is an easy and durable way to close the box and also open it again to…

PARTY GLASSES - just 20g filament - fast print!

3D Printable Party Glasses Key Features: Shutter-Style Lenses: The horizontal slits allow for partial visibility while maintaining the bold design. Easy to Print: No supports, just 20g of filament needed, printed in less than an hour.…

Magic credit card wand star - fast print

Magic Payment Wand – Pay with a Little Magic Attention please: This is a remix of DesertCruiser's model available at: https://makerworld.com/models/2282000 Turn an everyday gesture into a moment of enchantment. This 3D-printed magic wand…

Temp Tower (Fast)

I wanted a temperature tower that was fast as most of the models would take several hours. Found this model by spiga76 , changed the PLA model a bit to go from 230-190 instead of 240-200 and added labels for filament types. Printing For…

Fast Stringing / Retraction Tests

I designed these to be printed very quickly so you can test your retraction settings without wasting a lot of time/filament.

Good Fast Cheap Fidget Toy: Pick Two (All positions)

A physical version of the “good fast cheap” Venn diagram This is a redesigned mechanism for K2 Tech Designs' Good Fast Cheap slider. This addition uses a whippletree/rocker bogie mechanism to let you toggle any two switches, but not all…

Flashforge Adventurer 5M (AD5M) Minimal DIY Enclosure - prints faster, uses less plastic - and more

Heads-up News Heads-up #1: there’s a newer version of this here: https://www.printables.com/model/1247920-new-v30-of-top-riser-set-for-flashforge-adventurer Also, heads-up #2: There is a helpful new “guard plate” improvement remix…

Optimized Gridfinity Base: Faster, Smarter, Better!

A great deal of care must go into a design before there’s nothing left to optimize. I think we can all agree that Zack Friedman’s Gridfinity system has become a benchmark for organizational systems across sharing platforms. However, every…

New v3.0 of top riser set for Flashforge Adventurer 5M (AD5M) Minimal DIY Enclosure - prints faster, uses less plastic - and more

How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…

HSW Single Walls - With Integrated Frame and Fastening Points (Honeycomb Storage Wall)

Update 18/09/2023 Added “HSW Single Wall 11x2 SD” & “HSW Single Wall 11x3 SD” Update 30/04/2023 "HSW Single Wall - 11x7 HD" added “HSW Test Wall HD” added All files renamed ---------------- My new Honeycomb Coffee Wall just needs one…

Puffer Jacket Pen Holder (110 mm) – Cozy Desk Organizer, Fast & Strong Print

Bring a bit of winter “street style” to your desk with this white puffer-jacket (Montclair-style) pen holder . The padded sleeves, front seam details, and chunky “pockets” make it a fun, modern desk accessory that still looks clean and…

Fast 608 bearing

This is a very simple, very fast to print bearing made of three interlocking rings which print in place. You can use it as a drop-in replacement for ordinary skateboard bearings, but because it relies on sliding rather than rolling…

THE 100 v1.1 - The fastest 3D printer based on a printed Frame

Description This is THE 100, the fastest 3D Printer based on a printed frame. It does Speedboats in less than 4 minutes and is capable of doing high quality prints in 1/12th of the time a Ender 3 would need. By the time releasing, The 100…

Wall Mount Quick fastening system - Sistema universale di Fissaggio Rapido

Wall Mount Quick fastening system for panels and coverings - Sistema universale di Fissaggio rapido a Pressione Available in two models: Wms_1 - Wms_3 Filaments: PETG - PLA+ - ASA - ABS Hardware needed: Screws as per assembly requirements…

Chibi Banana – Sweet, Simple and fast 22min

Chibi Banana is a compact and charming print, perfect for adding a cheerful touch to any desk or shelf. Its smooth, rounded shape and expressive face make it a satisfying and easy project for any 3D printing fan. Chibi Banana is available…

Turbine blower (two planetary gears 36:1 - faster, stronger, louder)

My hand cranked turbine blower is cool and works fine - however you have to crank it really fast for a nice blow. So i tried to add another planetary gearbox - and it works so much better (and unfortunately louder). All parts are 3d…

Boomerang V5 – Light and Fast Returning

The Boomerang V5 – Light and Fast Returning is the latest refinement in an ongoing boomerang design series, tuned for maximum distance and a quick, reliable return. Weighing in at under 10 grams , this three-bladed boomerang achieves an…

Dodge Charger R/T Kit Card (known from Bullitt, Blade, The Fast and the Furious)

Summary This is a model of a Dodge Charger R/T (1969) in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned, but the…

3D Printer Bed Cleaning Spatula fast and light, bed Scraper

This bed scraper is perfect for removing small blobs, filament strings, and leftover adhesive. 🔧 Practical & Efficient Available in 3 different sizes to suit any printer setup Lightweight and easy to handle Helps keep the build surface…

Flashforge Adventurer 5M (AD5M) - simpler, easier, faster drag chain termination at hotend (v1.0)

NEW The new remix prints as one piece, not two, with no supports needed, and this eliminates an intermediate step of gluing two parts together. Kudos and thanks to WingWong (@WingWong_521453) for the idea. I'd have just used his remix,…

throwingstar shuriken fast to print