Liczymy pasujące modele…
I designed this part for my FlexiSpot E5 to replace the net, that came with the desk to hold the cables. I added holes to make it filament-saving. I can only confirm the fitting on the E5-model. Please let me know, if other models work…
Cable Clip for Standing Desk This is a simple clable clip I made to better manage the power cable going up to my Flexispot Standing Desk, but can be used for desk/application where a clip is needed to hold along a 90-degree angle. The…
Flexispot E1 Vacuum Bumper My Roborock vacuum would often drive up onto the feet of my Flexispot E1 standing desk while cleaning due to the front of the foot cap being sloped. Sometimes, this would lead to the vacuum getting stuck. This…
My desk do not have the screws used by the original model, so i remixed it in order to use the screws i have. For the installation just remove two of the screws holding the desk top to its support. Put the headphone older in place and…
This is a cable holder that replaces the original hook on FLEXISPOT Essential 100x60cm and reuses the original screw. Prints without supports. Source: Version 1 permalink (photo with white filament) Version 2 permalink (photos with pink…
This cover replaces the large plate that is supposed to hide the cables under the table. You can print it flat but it should also be possible to print it standing.
I designed this part for my FlexiSpot E5 to replace the net, that came with the desk to hold the cables. I added holes to make it filament-saving. I can only confirm the fitting on the E5-model. Please let me know, if other models work…
Printed in PLA with 0.6 Nozzle, 0.44 Layer Height, no supports and 3 Perimeters.
I love my new flexispot desk, but the dangling wire from the controller was bothering me - so I made some cable holders! These are made for the E7 pro, but works with any steel/iron surface and a φ5.2mm cable. You'll need one φ16mm x t5mm…
Although on their website the Flexispot treadmill is shown being stored upright, the instructions state that resting it upright can damage the product. I believe this is because the power switch and socket stand slightly proud of the end…
Here's yet another option for a desk mounted headphone holder, this time designed to fit the existing mounting holes of the FlexiSpot E7 series control panels. The top plate of the headphone holder is sandwiched between the top of the…
This is a backpack hanger designed for the Flexispot E7 desk. It cleverly utilizes the space between the tabletop and the legs, attaching via friction for a secure hold. The design is optimized for printing on its side for maximum…
This is a simple Cable Duct for Flexispot Desks, it will definitely fit on the EW8 and Q3. If you think it will fit on your desk, there is a FitTest file, with which you can easily test the fit. You will need TPU to print the DuctCover…
Houder voor flexispot display zodat deze op het bureau geplaatst kan worden. Huidige display moet uit elkaar gehaald worden. Dit kan gedaan worden door de 4 schroefjes aan de achterkant er uit te schroeven. Deze zijn nodig voor de houder.…
Features Mounts to left or right table leg Clip-in system for Brennenstuhl power strips (PSU) Two variants: 54 mm hole spacing Customizable hole spacing with OpenSCAD Printing & Assembly Instructions Print the mount in the default…
Story: I wanted to add a small drawer to my Flexispot desk . I played around with the idea and modelled this small but useful drawer. Inner diameter: 150mm x 209mm x 18mm Tabletop thickness: 25mm Print with Brim and without supports! No…
Tired of tangled cables cluttering your standing desk? Get organized and boost productivity with these 3D printed cable management solutions! These were designed for the FLEXISPOT E6 MAX Dual Motor Standing Desk. 💥FlexiSpot Amazon Prime…
Simple guard to prevent your chair ripping of the buttons of the control panel.
I lost the stabilizer adapter for FlexiSpot MA8 monitor arm, this is a replacement printed at 5 walls, 30% infill., .32 layer height prints in 4 minutes on creality k2 plus Fits tightly.
I received this desk from a friend, who complained that only one leg would move when adjusting the height. One look underneath, and i saw it was missing the rod from the left (powered leg) to the right (unpowered). I used ½ PVC, cut to…
This is a Gridfinity baseplate for the "Untertisch Aktenschrank RW2" from Flexispot, or a drawer with a size of 387mm x 231mm. How I Designed This This make is created with the Gridfinity creator ( https://gridfinity.perplexinglabs.com/ )…
A vertical laptop mount at the edge of a table with the thickness of 16,5mm and a max laptop thickness of 30mm. With a screwhole to secure the laptop and holder to the desk. I have a flexispot table which is 1,2m wide, but I need too…
Underdesk cable support for Flexispot E1 / E1 Pro Thanks to @jvdw_2620149jvdw_2620149 for testing the model.
With the slider, you can move the Flexispot display if you cannot decide on a position or need a variable one. No additional holes need to be drilled. Only the two required for the display itself. I clamped the large rail together using a…
It's a wedge you put on between your desk and clamp. Using for Neewer boom mic stand that kept falling off. Stole the design concept from @PeterLa_302641 after being lazy and not measuring my desk before printing his and it not fitting.…
Simple hook that attaches to the backside of the CMP051 cable management tray from flexispot. The fit is designed for the outer slots, where the hooks nicely lock in place. I sticked to PLA with standard settings (0.2mm layer height and…
Can be inserted into the base of the Flexispot table. This extends the table and maintains the distance from the wall. Printed standing with Briem, 5% Infill is enough.
Parts required The two printed parts One M3x10mm or M3x8mm screw Alternatively you could probably just glue the parts together at the position where the screw sits, since it doesn't carry the main load. Assembly and mounting Hook the…
Cable Clip for Standing Desk This is a simple clable clip I made to better manage the power cable going up to my Flexispot Standing Desk, but can be used for desk/application where a clip is needed to hold along a 90-degree angle. The…
Flexispot E1 Vacuum Bumper My Roborock vacuum would often drive up onto the feet of my Flexispot E1 standing desk while cleaning due to the front of the foot cap being sloped. Sometimes, this would lead to the vacuum getting stuck. This…
Ordnung auf dem Schreibtisch! Diese speziell angepasste Gridfinity-Halterung wurde exklusiv für die Fernbedienung des Flexispot RC3 entwickelt und hält sie stets griffbereit an ihrem festen Platz. 🔧 Eigenschaften: Kompatibel mit dem…
Made a drawer for my flexispot standing desk. Uses the premium keypad as handle for opening the drawer (I think it comes as standard on pro desks). Drawer inside dimensions 255x110x100mm (LxWxH) Made to hold calipers, rulers, and other…
Fit anything with a clamp to the 45 degree, 17mm deep bevel on flexispot beveled desk surfaces. Wide enough for all of my wife's accessories, meant to be a minimal profile but extend deep enough into the desk for a stable clamping…
This will slot in the middle of the desk frame between the top and the frame of the desk no screws required. It is a very tight fit for the first time you will have to push the bars a bit not enough to damage it tho.
a cover cap for the feet of a FlexiSpot Basic table frame to gain a defined distance to the wall. Printed with TPU filament, 20% infill, no support needed. Gives an additional 45 mm clearance to the wall and therefore the desktop will not…
Ich habe mir diesen Halter konstruiert um meine Kabel besser verlegen zu können. Da an meinem Flexispot diverse möglichkeiten sind solche Halter anzubringen, wurden als erstes 2 verschiedene desinged. Hauptgrund war eine gute Verlegung…
I designed this cable chain for my Flexispot E7 standing desk with tinkercad. The main idea is to provide an easy to use way to organize multiple cables (e.g. power, monitor, speakers, …) in one chain. Compared to the classical cable…
FlexiSpot desc foot protection Print Settings Printer Brand: Artillery Printer: Artillery Genius Rafts: No Supports: No Resolution: .2 Filament: SUNLU TPU any Notes: FlexiSpot desc foot protection Category: Replacement Parts
A convenient hook for your headphones that attaches using existing fixtures to FlexiSpot EF1/EG1 standing desks. How to Attach Remove both of the M6 screws from the top of the leg on either side of the desk. Then replace the screws with…
A small protective cover I created to block access to the control panel. Edit: added chamfer
I made these buttons to turn my PC on and off with a button right next to the FlexiSpot panel. The hole is 13 mm in diameter and I used a 12,5 mm Button with it. The version with Offset is if you want to glue it on top of the metal bar.…
My Flexispot standing desk didn't raise to quite the right height for me (I'm 6ft 6) and so I designed and printed these feet to raise the desk a few more cm and to stop it sinking into the carpet quite as much. I have designed them so…
If you have a Flexispot standing desk and headphones, give this hook a try! It mounts using the existing bolts in the top of the desk leg (fits both left & right sides). The original model wasn't wide enough for the strap of my…
When you own a desk bike from Flexispot and you want to put it away afterwards the training , you already noticed that it is pretty exhausting to hit the buttons to release the lock of the legs from the bike. Therefore we designed a tool…
This honeycomb cover helps you to store your cables under your Flexispot desk. It uses the remaining threads on the screws from the frame. The model is quite large and is not printable for everybody. You need a bed to support 290mm in one…
Hanger to bolt onto a Flexispot E1 Desk (62mm bolt pattern). Additional hardware required: 4 washers M6 12*1mm 2 washers M6 18*1mm Each screw takes the large washer first, followed by 2 of the small washers. The washers are added to the…
After switching up desks, we wanted clips like we used to have for our old desk to manage our pc cables. Taking inspiration of what worked we started from scratch. The big top hole is to place more permanent cables, like for you monitor.…
A holder to mount a Brother P-Touch label maker to a Flexispot peg board.
My desk do not have the screws used by the original model, so i remixed it in order to use the screws i have. For the installation just remove two of the screws holding the desk top to its support. Put the headphone older in place and…
Goes around the metal tube at the front of the desk has a tendency to press into my private region and it is really cold and unpleasant. I have printed out three of these at 230mm each, for a total length of 690mm. You may need to adjust…
Note: this features 2 versions of the hook. The translucent “blocky” one is version 1, the white “curvy” one is version 2. The original metal hook that comes with the desk is quite annoying: It only uses one screw and it keeps turning It…
