243 modeli
Hello to all gun-guys and trigger happy people! I made an foregrip for my AR-15 in an extremly light, slim and tiny version, just to fit on your gun with M-Lok rail. I recommend to print with support and an infill of min. 50%. Like this,…
Wydruk około 1,18 €–1,45 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
Wydruk około 2,64 €–3,23 € nettoWstępna wycena jednego wariantu
Angled Vertical Foregrip (M-Lok) I was looking for foregrips on thingiverse but couldn't really find one that I liked so I decided to make one myself. I found this grip made by Strike Industries and I really liked the look of it so I…
I modeled the Punisher Skull and added it to the Short 2 IPT file in this source. https://www.thingiverse.com/thing:580466 I found this one https://www.thingiverse.com/thing:2742432 on here, But my slicer didn't like it so I made one. I…
Version of the Shade Vertical Foregrip with a monolithic body. Functionality, design and usage are identical to the original design just without seperate side panels so it prints in only two pieces. Print Settings Printer Brand: Creality…
You know what to do with this, no support is needed. will need screws and nuts.
An ergonomic angled foregrip.
The famous weapon used by the SAS in the Iranian embassy hostage crisis in the 1980s. The MP5 can fire 9mm parabellum rounds in single shot, three-round bursts, or full automatic at 800 rounds per minute. Now your Dummy 13 can have one of…
The Shade Foregrip is a vertical foregrip designed for Nerf and Airsoft. This grip can be attached to Picatinny-Rails aswell as Nerf-Rails without any modification or adapter. Notches in the top allow the grip to be locked in different…
Remix of Shqype MLOK AFG With Correct Holes and Guide Tabs This is an upgrade over my M-Lok AFG Angled Foregrip. There are "wings" that wrap up around the handguard. It should fit most slim AR-15 octagonal handguards with flats that…
Print upside down. Smaller one is more versatile, larger is a bit tighter and may not fit all picatinny, especially printed picatinny that might be slightly oversized. Two 6-32 screws.
UPDATE 19th Apr 2023: Body and Bracket have been replaced by reinforced versions. .stp has been updated too. Rest stays the same. This is the 45°Shade Foregrip an alteration of my vertical foregrip design. It has all the features of the…
Redid my angled foregrip for M3x25 screws and hex nuts. Hangs on to the rail much, much better now. There are long and short versions here.
The original Shade Foregrip had wide top brackets so it would clamp down securely to Nerf-Rails. However this prevents it from being mounted to certain low-profile Picatinny rails (for example the one found on Worker Retaliator pump…
Angled airsoft grip. Use 2 5x30 mm hexbolt. Printed with 0,6 mm nozzle. 3-4 walls. 0,24 layer height. 20% infill. Printed in PLA + 870 3DLAC. No need for support.
So this is the Tone Foregrip. An angled foregrip along the same lines as my Shade Vertical Foregrip, designed for Nerf and Airsoft. The grip prints in four separate pieces, two for the body and two separate panels that can be customized…
I designed this smaller foregrip a while ago for a pistol I was working on. It is nearly vertical, at 83°. Use a 6-32 x 1.25" bolt to mount the Picatinny. The Mlok uses 2x 4mm x 20mm screws with mlok t-nuts. Update 10/25/2022: Added a…
Disclaimer : I made this as a shitpost, I didn't expect it to be particularly useful, and somehow it's been found usable nonetheless. I imagine there are better designs, but thank you for considering mine regardless. Foregrip I designed,…
The “Knockout” Angled Foregrip design! This foregrip gives a different, unique feel when pulling the gun into your shoulder and controlling recoil! ///This cannot use the MMS Quick Release Pins! This needs actual hardware!/// It might…
this is a robust foregrip/handle for picatinny rail
A version of the Tone Foregrip utilizing two bolts instead of one for a more secure connection. Functionality an design stays mostly the same as the original Tone. Bolts are again M5x30mm. Print Settings Printer Brand: Creality Printer:…
Remix of Shqype MLOK AFG With Correct Holes and Guide Tabs I have also uploaded a Keymod AFG . Although you can use this for non-standard or not-AR-15 handguards, I have uploaded a V2 AFG , which is an improved version of this one. I made…
Just a test of my modelling abilities. Works well. I basically wanted something that would print very nicely. Requires 2x M5x30 bolts and M5 nuts. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: Yes Supports: Yes…
Version of the Shade Vertical Foregrip for M-Lok. Panels are identical to the original design. Update_28_FEB_2023: Slightly moved bolt holes so they're properly centered Print Settings Supports: No Infill: 100% Category: Toy & Game…
Foregrip Mag Carrier by Qwerm A picatinny mounted foregrip that holds a spare AR15 magazine. A copy of FAB Defense's MG-20. Included is an optional "Blocker" STL that can be used to change Cura's fuzzy skin settings for the finger…
Version 1.1 is live, featuring updated ergo, larger bolt compatability and fixed tolerances. Commissioned by @Thanhtacles Simple straightforward angled foregrip, modeled in the style of the popular Worker branded foregrip. Print…
I just wanted to see if I can design this myself. I'd use ASA for practical use. You'd want high wall counts and relatively high infill so it doesn't just crumbles under load.
One is specifically made for the AR-15 Anderson rifle for more space when using a flashlight. The second model is compatible with all guns with the M-LOK mounting system. Print with supports. Infill 95%.
The grip is printed in two parts and clamps around the rail on the Longshot like the original grip. Printed without supports. Hardware: 3x M3x8 socket head screws
The “Bolter” Angled Foregrip for Picatinny! This Angled Foregrip features a more sturdy, higher surface area gripping surface. It puts a little space between your grip and the center axis of the rifle, which works particularly well with…
A forward grip for an AR-style rifle. Attach to your handguard using MLOK nuts. The 3MF file has modifiers to ensure 100% infill under the screw attachments. UPDATE (2026-03-29): I've added an unlabeled variant, as well as a HOG HEAD…
To assemble just look at the second picture, you print two cores, sandwich them together, put the sleeve over it and punch the pin through and then once its on the rail you can put the joined pins in to hold it in place
Remixed from Recticle's Angled vertical foregrip (Originally on Thingiverse). This is just the same but I adjusted the diameter of the holes to fit Magpul OEM MLOK hardware. Good for anything MLOK, whether it's a firearm or an airsoft,…
recommended settings are 50-60% infill .15 layer height no supports needed
Inspired by the SRU Katana Grip The Extendable Katana Foregrip is a length-customizable foregrip. By printing additional spacers, one can adjust the length in increments of 10mm. Hardware required: 1x M4x25mm bolt+nut (or 6-32x1") for…
A MOE style picatinny foregrip to go along with my hex silencer. I use a short one myself but the full version is also available in the files. It uses two M5x32 bolts. I've printed one in ABS and treated it with some acetone vapor, it…
This is a remix of the popular angled foregrip to fit on the short cadex rail often issued to Canadian armed forces members. I added a third hole for the short length of rail and added more slit length for grip compression. I also…
I present a Glock-ish angled Picatinny foregrip. Angle, form and texture are designed to go well with a Glock pistol grip. The grip can accommodate a spare magazine and has a funnel. A blank STEP-File for your custom textures is included.…
As requested, a remixed design to allow a better fit with free floating tubes AND scaled up by 110% to allow Magpul M-Lok hardware to fit. Slightly more difficult to print though, but not impossible with the right slicer settings. I ended…
This is a lengthened version of Recticle's grip.
Angled Vertical Foregrip (M-Lok) This is made in Shapr3D. Low-profile angled platform with ggressive texture and storage volume combined with modular design to allow improvements and adaptation in the future. I'm adding a 3mf and stl file…
It's an MP5 style K-Grip! The original author provided two additional files - the short and the long locking tab. These press into place, and should probably be glued. I've printed a few of these now using carbon fiber filament, and they…
Good day, Welcome to my profile, full of models and miniatures :-) I'm an Ainon3Dprint model maker and printer I have a RIS, RAS handle, grip, foregrip for you and it works, it fits perfectly. Ideal for better handling of your Airsoft…
Hello everyone! This is an angled picatinny foregrip inspired by the foregrip on the Nerf Pro Torrent. I designed this for use with GP3D's beautiful Pump Kit for the Nerf Pro Torrent, but it should work on any standard picatinny rail. I…
etsy.me/3n6BXUo bit.ly/42oqoYP Replica Tec 9 Frame scale model with foregrip by saxonite - Thingiverse Please leave like if you download this model, it goes a long way in motivating me to continue making polymer furniture & replicas, I…
---------------------------------------------------------------------------------------- Description ---------------------------------------------------------------------------------------- This is a pretty simple front grip / foregrip…
An angled fore grip made for Nerf blasters uses 2 m3x25 (or m3x30) screws and 2 m3 nuts
I was asked to make a M-Lok version of my previous foregri, here it is! Designed for .2 layer height with no supports Once printed you will need to use a knife to open the bolt holes, I purposefully made one .2 layer across the hole so I…
20 degree AFG compatible with M-LOK
---Title: MP7 Foregrip & Adapter ---Citations: I started by designing an adapter for my MP7 foregrip that I had taken off my VFC/Elite Force MP7 AEG. I then realized how simple the design of the grip itself was and decided to draw that up…
Angled Foregrip for M-Lok Style Attachment Point
m4x12 (1) m4x40 (1) m4 M-lok nuts (2) 2 10mm washers are highly recommended for distributing pressure more evenly
Angled foregrip cut in a manner to fit flush with the Kriss Vector. This gets your hand further away from potentially engaging the mag release when shooting. Will need an M4 30mm screw and nut to secure to picatinny rail. Printed in PETG,…
Angled foregrip for picatinnyrail. Use 5x30mm hex 0.4mm nozzle, 6 walls, 25% infill. Fuzzy skin 0.4 distance and 0.5 thickness.
The holes would not line up on my firearm, so I extended it 5mm. It fits perfectly now Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .200 Infill: 25% Filament: Hatchbox PLA Black Category:…
I like WantItPrintIt's original enough to tinker, added an angled fore grip (taken fro the rear pistol grip) and the -T designation.
Remix of Toxic Sandbox Keymod angled foregrip. https://www.thingiverse.com/thing:2889845 I have also uploaded an M-Lok AFG. You can find the M-Lok AFG here - https://www.printables.com/model/304426-m-lok-afg-angled-foregrip Added lugs to…
BOM: 9pcs M3 heat inserts (length 4-6mm) 6pcs M3 button/pan head screws (length 6-10mm) for mounting the side plates 2pcs M3 (any kind of type) (length 8-12mm) for mounting front 1psc M3 socket head cap screw length 30mm for locking the…
The Luna “EOM” Vertical Foregrip! The idea was to get a futuristic-geometric take on the Magpul MOE. I've been having a bit of creators block recently, so i'm not exactly proud of it. But I know i'll make it better in the future and…
---MP.5K ForeGrips--- Introducing my non-vintage MP.5K ForeGrips. Based on the 1976 MP5K prototype by H&K. I realize I am not the first to replicate this grip so I decided to give it a couple twists. ---Description There are 2 flavors to…
Remix of the Shade Vertical Foregrip by LoneWolf052 with a monolithic body and the slim-top rail design for low-profile/non-standard Picatinny rails. Functionality, design and usage are identical to the original design. Prints in 2…
print it in one go, all parts and the amounts are prepared already, no support, 5 walls 25% infill Please dont use this to prime high spring loaded blasters, i dont know if the parts can withstand the pressure.
After 2 years of not touching my original design, and a long pitched battle against my children this past weekend, I decided it was time to finally update my original Stryfe foregrip. This is the MK2, which makes some changes to the…
A requested foregrip design from our community poll. Hardware: 2x m4 30mm bolts (Pan head or button head are best) 2x m4 nuts Thank you, all who responded to our poll. We will be creating more soon. If you would like to participate in the…
A foregrip for the Dart Zone Venom that holds a mag
Ultra weight and smooth honeycomb grip for Picatinny. Features a dynamic honeycomb-textured design that boosts stability through superior friction and adds an aesthetic edge with modern design sensibilities. Its contours are meticulously…
A2 VFG by Qwerm Vertical foregrips in the styling of an A2 pistol grip. Includes Picatinny, M-LOK, and Keymod in vertical and 15 degree mounting. The 15 degree M-LOK version will need a ball end hex key to install. Disclaimer: I cannot…
Found the options for directly mounted accessories for the KAC URX 3.1. Adapted OnlyShellsRemain's brilliant grip to fit straight and stable onto the URX 3.1 rail. Uses the standard screws that came with the rail. Final version now…
Pointing foregrip reminiscent of the PTK foregrip. Includes both a picatinny and MLOK version. I printed flat on its back with only support on build plate.
I took HUMBLEKNIGHT's MK18 MOD1 and added a vertical foregrip with the grip taken from HUMBLEKNIGHT's Glock 19X. This does not really do anything other than look cool, but is does function as intended (albeit a bit too close to the…
FIXed original design of AR 15 Foregrip
This is a three piece picatinny rail vertical foregrip. The core sections are printed flat, and then a sleeve section secures it all together. Strong enough for pump grip use! Needs 2x M3x25, 2x M3x8, and 2x M3 hex nuts.
Airsoft only. Not for firearms. Part to extend RIS system for a cyma AK47, but probably fits similar other airsoft AK47 rifles. Original effort at an extension for a bullpup AK project but my longer mid-caps required the RIS to be closer…
Hello everyone! This is an angled picatinny hand rest I designed for fun. I didn't design it with any particular blaster in mind, but I quite like how it both looks and feels on the front of the X-SHOT Pro Fury-X. I used Captain Slug's…
Hardware free soft knife for meelee tags in nerf or other sports. Files are preoriented. Changelog: UPADTE: 19.03.26: added a midlock 2 compatible sheath
I wanted to use the excellent Pyrangle foregrip (by Captain Slug) for my Lynx but the standard version was a little loose so I remixed it to grip with no wobble. Now my weedy arms are able to prime my Lynx more easily. Also tweaked some…
Vertical foregrip with ergonomics in mind. Slimmer profile, finger groves and finger stop. Does take up some rail real estate. Print with strength in mind, I usually opt for more walls than infill. Can be printed supportless if your…
Simple grip design with my crosshatch pattern on it. Mounts with mLok. “brim” variant has built in support for printing.
I created this after printing a couple of different designs from here and finding them either too small, uncomfortable, or poorly fitting. This is the initial version, and still being revised. UPDATE 1: First print had tolerance issues…
Hello everyone! This is an angled picatinny hand rest I designed for fun. I didn't design it with any particular blaster in mind, but I quite like how it both looks and feels on the front of the X-SHOT Pro Fury-X. I used Captain Slug's…
A friction fit picatinny mount foregrip that can also hold talon mags! I would recommend printing diagonally for maximum strength! I would not recommend using this on a pump action blaster as its hollow design may make it too weak for the…
This is the Fudd frontend, so-called due to its similarity to that of a hunting rifle. It's considerably wider than the normal Cynthia frontend options, as well as shorter vertically. However, it's 5cm longer in the barrel axis, so if…
A m-lock low-profile foregrip. It's curved at both ends to provide a comfortable holding position, and doubaling has a hand stop. Based on popular m-lock foregrips but 3D printed. It has a ridged surface for grip in all conditions and is…
I remixed the awesome picatinny holder of CM Modelbau and putted a foregrip on it so you can mount it on your Alligator Pistol Crossbow or similare. Printed in PETG with 3 Perimeters and 50% infill
Quick remix of EszOzwierz's great AFG remix, added a groove on rear to allow easier access to screw hole.
Futuristic Vertical Foregrip for M-LOK This is a custom-designed, futuristic-style vertical foregrip made specifically for M-LOK rail systems. It features clean cuts, a bold and angular look, and ergonomic shaping that improves weapon…
I had the original grip design break when using it as a pump grip on a nerf blaster, so I made this version where the neck is solid and it uses a bolt to secure it to the rail, and the inside becomes a storage container. Hardware: M5 x…
I've made a Picatinny mounted foregrip for my Novritsch SSE-18 pistol. It probably doesn't serve any other purpose than looking cool, but then again, that is the quintessential part of airsoft. The mount grip is tight enough to be used…
This one was inspired loosely from the AKM wooden style foregrips with a bit of a modern take. Print at angled flat side ( see 2nd picture for reference). 100% infill 2xM5-25 2x M5 Nuts
Magpul-style honeycomb foregrip. Check out my other models at https://www.printables.com/social/379650-scone-cold/models
This is an attachment for all the existing Shade Foregrips, adding a rail segment to the bottom of the grip. This allows you to mount and stack additional attachments like flashlights, lasers, more foregrips, etc.... The picatinny insert…
Hardware 2 × M3 - 30MM Hex Socket Head Screws 2 × M3 - 20MM Hex Socket Head Screws 2 × M3 - 8MM Hex Socket Head Screws 4 × M3 - Nut
This is a Vertical Angled foregrip styled after the MLOK BCM Mod 3. There will be several versions available. The only model released currently has the same angle as the FGC-9's magwell and fits nicely around the barrel retainer. It works…
Fits very well with the Protean Talon receiver and fits Worker talon 10 and 18 magazine. May work with other models but I cannot confirm. Does a good job of guiding in Talon magazine. I used two sets of 3m pan head 30mm screws and nuts .…
UPDATE AGAIN: loaded revised versions to correct scale UPDATE: replaced 1:12 file with beefed up version. Added option for 1:6. If you are hoping to sell physical prints of any of my models please contact me. Hi, still a noob 3D modeler…
This is a gun foregrip attachment for the Valve Index controllers. It is designed to be as unobtrusive as possible, and doesn't interfere with the grip sensor. It works with all guns in Pavlov (except the pump shotgun). Update: Added a…
After printing the Shade Vertical Foregrip, mys on asked for some sort of cap so the dirt doesnt get to the grip when outdoors. Created very simple model, printed in TPU.
Here is a small minimalistic foregrip for M-LOK rails
Vertical fore grip for the Game Face Trion blaster. Uses the same self tapping screws that came with the stock fore grip. Some people like the vertical grip better than the angled grip. Files provided as-is with no warranty express or…
