Glowing Christmas Tree - Tealigh latern - Christmas Decoration
Printed on my Creality Ender 3 S1 with following settings: Mode: Vase mode Layer height: 0,16 mm Material: White PLA
- Pobrania
- 1540
- Polubienia
- 298
- Ocena
- 4,88
218 modeli
Printed on my Creality Ender 3 S1 with following settings: Mode: Vase mode Layer height: 0,16 mm Material: White PLA
Hello, here is a new version of my "There is a ghost in my house", to put an LED candle in it. ( https://www.prusaprinters.org/prints/30904-theres-a-ghost-in-my-house ) DO NOT put a real candle in it (unless you have very good insurance…
You need this filament to make the dinos https://www.dasfilament.de/filament-spulen/pla-1-75-mm/122/pla-filament-1-75-mm-glow-gruen-v2-800-g?c=11
👍 Do me a big favor and hit the Like button! ✨ 🛒 Shopping List WS2812B RGB LEDs (AliExpress) Wemos D1 Mini V3.0.0 (AliExpress) Thin wire 30AWG (AliExpress) Black filament – Sunlu Black Warm white filament – eSUN White‑B Solder tin Cable…
*** You are doing me a big favor by clicking the Like button :-) *** ** Let me see what you have made. Upload a photo in Add make ** Print the letter in black or other non-translucent color. Cover plates "adfekkapje.stl" and diffuser warm…
You are doing me a big favor by clicking the Like button :-) Shopping list for use with WS2812B leds WS2812B RGB Led (AliExpress) Wemos D1 Mini V3.0.0 (AliExpress) Wire thin 28AWG (AliExpress) Black Filament - Sunlu Black Warm white…
I wanted to create something wonderful—something a little magical. And that’s how my Glowing Winter Village came to life! Snow-covered cottages, tiny fir trees, and a winding road climb the hillside, creating a little winter world. With…
I designed this Heart of Te Fiti for a kids theater production of Moana. It uses a LED string light with an on/off switch that I had around the house, but can also be purchased online. There's also a necklace holder the heart snaps into…
*** You are doing me a big favor by clicking the Like button :-) *** This heart can be combined with the letters from my other project. https://www.prusaprinters.org/prints/109865-glowing-wled-or-led-all-alphabet-letters-and-all-n…
I was asked if I could make this: https://www.thingiverse.com/thing:1729963 as part of a gift but I wasn't sure where to get the LED module they used so I decided to remix the original model to fit some RGB LED Tealights I bought from…
WARNING: Read the entire post or your print will fail. I love this game. Very few games achieve perfection and this is one of them. I really like the way of life of the Nomai and this bust is beautiful. So I thought this print would be a…
*** You are doing me a big favor by clicking the Like button :-) *** 🔧 Project I have carefully listened to the feedback from the previous versions: 💡 Fewer LEDs than the 100 mm project 🔤 Bold, sturdy letters 🔗 Stronger links between the…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
This is ment to be printed with glow in the dark filament. It can proivde more realistic look of a night sky and planets. Print instructions Use hardened steel nozzle for glowing filament. Planets: Scale it/cut it in your slicer to fit…
Fits in the project Glowing LED and WLED all alphabet letters and all numbers 10 cm high. https://www.prusaprinters.org/prints/149829-glowing-led-and-wled-all-alphabet-letters-and-all- You are doing me a big favor by clicking the Like…
This detailed snow-covered winter cabin brings a cozy, festive atmosphere to any space. The house features a classic log-style design with snow-laden roof details, balcony, porch, and surrounding pine trees. The interior is hollow and…
I split it into parts in F360 to make it printable without using AMS. I printed it out of PETG and Bambu PLA Glow Blue. Eyes, tongue painted (can be painted through AMS anyways) The glowing circles fit in the holes well without glue, but…
Glowing Christmas Tree Print in vase mode Uses Electric Tealights Can be found here Remix of: https://www.thingiverse.com/thing:2690857/files
Printed using the reeltoreal.co.nz glow-in-the-dark ABS filament http://bit.ly/reeltoreal_nz Print instructions Print Settings Printer Brand: Up Printer: Up Mini Rafts: Yes Supports: Yes Resolution: 0.15mm Infill: 10% Filament: ReeltoReal…
A series of self-glowing exit and emergency signs i published on another platform a few years ago. 2 color print. Switch filament from green to self glowing for the final layers. The gcode files for Prusa i3 MK3S already have the color…
A remix of Patrickart's beautiful Charmander model - use it as a night light, as a showpiece, or give it to someone you love! Bill of materials All four 3D printed parts Three 10mm M3 self-tapping screws One 2x2032 coin cell battery…
Fits in the project Glowing LED and WLED all alphabet letters and all numbers 10 cm high. https://www.prusaprinters.org/prints/149829-glowing-led-and-wled-all-alphabet-letters-and-all- You are doing me a big favor by clicking the Like…
Here’s a little something for fellow Expedition 33 fans. A digital 3D-printable Glowing Monolith Book Nook . Think of it as a tiny slice of the expedition tucked quietly between your books, humming with that familiar yellow shimmer.…
Print the first 2 layers in a different colour for the eyes. then typically print in black for the rest of the body. Remix from https://www.thingiverse.com/thing:1564130
I made a promise to myself years ago that their would always be fresh flowers in the house. I wont let self quarantining put an end to my tradition. These glowing flowers and vase were designed and printed over the weekend. I used a 0.8mm…
Cute spider GLOWING! There is a hollow place for an LED Tea Light. This is a remix of: https://www.printables.com/model/299185-win-an-obxidian-nozzle-e3ds-halloween-competition Changes: - Enlarged - Hollowed out - Hole for Tea Light
Reupload from DasMia on Culta (current Printables user: https://www.printables.com/social/9303-dasmia/about).
This model has a cool internal design with mostly single-perimeter walls and a build-in support system for the roof based on lightning infill techniques. Have fun!!
So this is a simple remix of a Minecraft cube, the only tricky thing is that I printed an internal piece out of glow in the dark PLA so that when it's energized by an internal light (blue LED) it gives off a cool glow The cube model has…
Print the ghost in a white or clear filament for maximum glow‑through, pop the spring assembly together, and enjoy a floating, flickering spirit that looks right at home on any Halloween shelf, candy station, or eerie corner of your…
✨ Tree Variants Open spiral with exposed top Designed for attaching the LED strip to the inner or outer wall. Use any filament you like. Closed hollow spiral Ideal for translucent filament – the LED strip slides inside the spiral for a…
svítící filament PLA - Glow in the Dark PLA vrstva 0.3 výplň 15% perimetry 3x layer 0.3 infill 15% perimeters 3x
Summary Print a easy attachable frame that glows in the dark — perfect for nighttime orientation or emergency lighting. Whether for kids, adults, or safety-conscious households, it makes finding the switch easy without turning on the…
This is a remix of djedje_zr7's There's A Ghost (glowing) In My House, the original requires screws and nuts. I did not have them but I had a bunch of 8mmX3mm magnets so I redesigned both pieces to use magnets instead. Six 8X3mm magnets…
This 3D-printed erupting volcano diorama brings molten drama to your shelf! The model is designed with separate lava insert pieces, which can be printed in red filament and slotted into the volcano's surface. Inside, there's a cavity…
If you’d like me to keep going and bring you even more adorable models, you can support me on Patreon: patreon.com/draftaxis 🌸 A new ghosty friend is joining the Halloween squad! 👻💛 "Like Ghost" — a happy little spirit that’s totally…
My friend Julian from Instagram created a nominated and winning ai-generated image for the contest "My Girl with a Pearl" from the Mauritshuis Museum in The Hague/Netherlands. You should definitely check out his Instagram:…
You are doing me a big favor by clicking the Like button :-) Small LED bar 30cm with the text Heineken and the famous star! It is best to print this project with a 0.25 mm nozzle and 100% infill. Print Heineken, the star and the backs in…
Magic spell, potion, earring printed in glow in the dark PLA. Perfect for Halloween party or for gifts. No supports Maybe necessary to resize the model in CURA.
You are doing me a big favor by clicking the Like button :-) There is enough space in the bottom for a Wemos d1 mini and the cabling. Shopping list 21 x WS2812B RGB Led (AliExpress) 1 x Wemos D1 Mini V3.0.0 (AliExpress) Wire thin 30AWG…
LED Glowing Orb for use in Frosthaven. What you need: CR1220 battery 5mm LED 15mm glass marble
All of them fit a 180x180 bed, so you can scale them as much as you like or choose only the ones you prefer. For the best effect, use glowing filament from a good manufacturer.
You are doing me a big favor by clicking the Like button :-) Fits in the project Glowing LED and WLED all alphabet letters and all numbers 10 cm high.…
We have a large glass brick window in our garage that is the first thing trick-or-treaters see as they walk up to our house. I wanted to do something with it for Halloween this year to make the house a little more festive. I remembered…
You are doing me a big favor by clicking the Like button :-) Fits in the project Glowing LED and WLED all alphabet letters and all numbers 10 cm high.…
Just a remix of a skull face ( https://www.thingiverse.com/thing:2982140 ) adding space for leds and battery and connection. Print instructions I printed using the 0.30 draft mk3 setting with support. Took around 7 hours of print but…
This is a remix of the excellent " Glowing Ghosts" by JamesThePrinter https://www.printables.com/model/256139-glowing-ghosts I revised his model to just have two small eyes. Uses a standard tea light and is offered in two sizes. Enjoy!
Fits in the project Glowing LED and WLED all alphabet letters and all numbers 10 cm high. https://www.prusaprinters.org/prints/149829-glowing-led-and-wled-all-alphabet-letters-and-all- You are doing me a big favor by clicking the Like…
This is a small decorative ghost figure that has a holder for the base of an electric candle, which causes the whole ghost to glow! (It's based on the dimensions of this: https://www.amazon.com/dp/B06XCTP65H The top/candle part can be…
You are doing me a big favor by clicking the Like button :-) This heart can be combined with the letters from my other project. https://www.prusaprinters.org/prints/109865-glowing-wled-or-led-all-alphabet-letters-and-all-n Shopping list…
Print out of clear or translucent filament. Add battery powered fairy lights to illuminate. Print 2 halves and one lock ring. They should click together with a minimum amount of effort. I printed all parts with a brim and tree supports.…
This is a Logo of the Horror-Game “Dead by Daylight” using Skulls, created with Hueforge. This Hueforge requires 3 colours and was created with the following swap instructions: Start with Black At layer #9 (0.80mm) swap to Grey At layer…
This lamp is meant to be used with common LED tealights. It consists of a inner shell, where the tealight can be placed. The outer shell gets slid over the inner shell. The two parts can still be rotated between one another, so you can…
Summary Self-illuminating emergency exit signs – printed quickly and easily with just one filament change! Print Filament: “Glow in the Dark” and a nice, dark green filament (PLA or PETG - don't mix them!) Layer height : 0.2mm Infill :…
Remixed to allow for an LED Tea Light which makes the brain glow. Raft: yes Supports: yes (tree) Layer Height: 0.2 Frankenstein's Monster LED Tea Light Holder Remix by: Robert Martin Remix on: 10/20/2022 Original License: License:…
Discover and share the magic of Halloween with my 3D-printed Pumpkin Coin! Perfectly suited for a spooky Halloween maze experience, this specially designed coin served as the key to unlock sweet rewards at our Halloween Maze 2023. Each…
Removed bottom part of model for compatibility with different tea light and etc. Only large (happy converted to large)
Fits in the project Glowing LED and WLED all alphabet letters and all numbers 10 cm high. https://www.prusaprinters.org/prints/149829-glowing-led-and-wled-all-alphabet-letters-and-all- You are doing me a big favor by clicking the Like…
Nice decoration for the all or roof. Glow nicely in the dark. You could re-scale the files in the slicer to change the "distance" of the objects in your galaxy. I would recommend not to re-scale the thickness (z-axis), only scale…
Build a glowing snowflake ornament with LED noodles! Use four strands of LED noodles and a coin cell battery holder to create a light up ornament. Learn Guide https://learn.adafruit.com/led-noodle-snowflake/ YouTube Video…
🌲 English below, Deutsch weiter unten 🌲 The same slightly asymmetric trees as my vase mode set, now with little round holes. Printed with 3 walls, the light shines mostly through the dots, like tiny lights in the snow. ✨ Trees: small 6 ×…
Fits in the project Glowing LED and WLED all alphabet letters and all numbers 10 cm high. https://www.prusaprinters.org/prints/149829-glowing-led-and-wled-all-alphabet-letters-and-all- You are doing me a big favor by clicking the Like…
🎃 Glowing Jack-O’-Lantern – Tabletop LED Pumpkin Light up your Halloween with this mini 3D-printed Jack-O’-Lantern! Designed with a bottom slot for an LED tea light , it gives off that perfect spooky glow — no supports needed, just print,…
I really like the Glowing Ghosts Spooky Ghost, but wanted the tea light to fit snugly so that when my kids moved the ghost, the tea lights followed it. This locks the tea lights I purchased snugly into the plug. The plug then has a…
It's a cool glowing keychain cristal so that you can find you keys when it's dark.
You are doing me a big favor by clicking the Like button :-) Fits in the project Glowing LED and WLED all alphabet letters and all numbers 10 cm high.…
Introduction This model is a simple spin-off of my Solar System Lithophane Lamp Series . Instead of a planetary lithophane, this lamp is a simple sphere with uniform thickness. Fusion 360 Files are provided and the license is chosen such…
A highly detailed demonic wolf head bust designed for dark fantasy lovers and collectors. This model features aggressive facial expressions, sharp fangs, glowing eyes, and intricate organic textures flowing through the base, creating a…
!!! IMPORTANT slicing settings!!! read first: This model was made to be printed with a 1,00 mm nozzle. You need a extrusion width (or at least a perimeter width) of 1,20 mm, otherwise the perimeter will not align You have to set diffrent…
Imported from my designs on Thingiverse. Original upload was 27.03.2019 (dd.mm.yyyy) Make your own glowing redstone ore. You need glue. I used fast drying superglue. RGB USB LED strip of some sort. Last thing is greaseproof paper or…
You are doing me a big favor by clicking the Like button :-) Shopping list 18 x WS2812B RGB Led (AliExpress) 1 x Wemos D1 Mini V3.0.0 (AliExpress) Wire thin 30AWG (AliExpress) Black Filament - Sunlu Black Warm white Filament – ESun…
the eyes are fading in/out and mouth is lid with green LED THE DOWNLOAD FILES ARE FOR PLAQUE AND THE MODIFIED DRAGON HEAD http://www.youtube.com/watch?v=ZkAzn-z_ku8&feature=youtu.be i'll add the led fad in/ out circuit soon as well…
Info: siluette ment for glowing filament to be glued to the ceiling or wall or anything like in a child room
Summary Beautiful Saturn V as a self-illuminating wall art - fully scalable, fast and easy to print! Various printing options available: 2-piece for a small, quick printed rocket and 4-piece for a biiig one! 🚀 Including engine fire! 🔥…
I've printed the lithophane in orange PLA, then I bent it with an empty filament spool and a heat gun. It looks awesome in the dark with a little candle. Perfect for every entrance at Halloween because it's printed pretty fast. Print…
I aligned “Hello_Kitty_back” and “mid v1” on top of each other to make it solid flat surface on the back, and sliced the bottom on PrusaSlicer. I grouped each part color-wise to make it easier to print. Also, original model was intended…
Stargate chevron inspired earrings. Glowing with LEDs and small battery. Print instructions Printable without supports For glowing version you'll need: 2.5 to 3V SMD LED, the shinier the better. CR1025 3V battery solder and 2 short wires…
I needed a glowing gem for children's camp game, so I printed one. This is a remix of beautiful diamond model. I needed little different shape so I cut the bottom and made it symmetrical. I also cut the space inside of the gem so you can…
This a mashup of two different models with some modifications. I added a hollow space for an LED Tea Light so IT GLOWS!
Popis svítící vlákno PLA - Glow in the Dark PLA vrstva 0,3 výplň 15% perimetrie 3x vrstva 0,3 výplň 15 % obv
You are doing me a big favor by clicking the Like button :-) Fits in the project Glowing LED and WLED all alphabet letters and all numbers 10 cm high.…
Fits in the project Glowing LED and WLED all alphabet letters and all numbers 10 cm high. https://www.prusaprinters.org/prints/149829-glowing-led-and-wled-all-alphabet-letters-and-all- You are doing me a big favor by clicking the Like…
I've printed the awesome Crystal Tree for Triple G Workshop and I then had the idea to remix it to be able to use a LED garland to become a cool christmas tree. Printed with Eryone Silk Tricolor PLA (Purple - Green - Burnt Orange) - No…
It's a fully 3D printable magic staff topped with a glowing orb! (Okay, the LED lights you can't print. Those you will need to provide based on your own LED preferences.) It's technically a polyhedron, so it looks faceted in the light. I…
Zombie Moon Clock 4 Color Glow in the Dark Wall Clock: Just "in time" for Halloween. Designed at 140mm square to fit my printer bed. The first layer is the square background. On top of that I placed a 1mm thick circle for the full moon…
Add a touch of holiday cheer with this Christmas Tree Flexi Fidget Keychain ! This design combines festive vibes with practicality, making it a perfect addition to your keychain or a thoughtful stocking stuffer. Its flexible design is…
Christmas tea light accessories to turn a simple tea light into a snowman decoration/ornament with glowing nose. Dimensions: 34mm to 38mm tea light sizes available. Print Tips: - Choose the appropriate size of top for your tea light -…
🏡 English below, Deutsch weiter unten 🏡 A little village full of light Inspired by ceramic Christmas houses, I designed the big house in Blender and then two smaller ones to keep it company. The roof shingles are placed slightly crooked…
This cute little rocket ship always looks like it's about to blast off to space. It makes a great gift, decoration, or toy. You could give it to your little family members or friends, or just keep it for yourself. Supports: no Infill: 7%…
My grandson (18 Months) loves lights and balls so I created this for him and he loves it. I printed this in PETG and it has survived many months of being thrown hard onto solid floors so it appears to be very durable. I made it faceted…
Convert an ordinary 18x13 cm frame-less picture frame into a total eye-catcher! Update! Added V2 - more space for electronics and a light bar at the front Bill of Material Frameless Picture Frame 18x13 cm or similar-sized glass/wood…
Print it with glowing PLA and it will help you to see and identify your partner under the water when it's very dark. Just point your light at it for a couple of minutes and it will shine bright and help you to see when it's dark out…
I've taken on a fun project for the 2023 holidays: creating a 3D printed version of Constantin Brâncuși's Endless Column . This piece is famous for symbolizing infinity and life's continuity. My version is a great project for 3D printing…
I originally made this design for the August 21, 2017 Total Solar Eclipse in North America. As the April 8th, 2024 Total Eclipse for North America approaches, it seemed fitting to reprint. I use colorFabb glowFill in the middle so the…
Circuit Design of crow with red LED eyes Power Supply (9V Battery) : Connect the positive terminal of the 9V battery to the positive rail of your breadboard. Connect the negative terminal of the battery to the ground rail . LDR and Base…
Fits in the project Glowing LED and WLED all alphabet letters and all numbers 10 cm high. https://www.prusaprinters.org/prints/149829-glowing-led-and-wled-all-alphabet-letters-and-all- You are doing me a big favor by clicking the Like…
A Stargate themed gear knob designed for ease of use.