17 511 modeli
This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
Some not required material (in my opinion) was removed to decrease printing costs and duration further. Main features: Two magnets for each segment with press fit (6x2mm). Minimized material costs, the gridfinity boxes are fixed only by…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
This 1x2 gridfinity module holds a digital caliper horizontally. It is stable even without a baseplate. This model prints without supports, but I recommend watching the first layer go down to ensure the circles around the magnets all…
Wydruk około 2,18 €–2,67 € nettoWstępna wycena jednego wariantu
Design description This is a gridfinity holder for the Xiaomi Wowstick 1F+ (plus) and its 56 bits. Also holds the base and (de)magnetizer. May also be compatible with the 1F Pro, not sure what the differences are. Based on ZachFreedmans…
Wydruk około 9,65 €–11,80 € nettoWstępna wycena jednego wariantu
Based off Zack Freedman's pretty useful Gridfinity stoarge system. Original model I used can be found here: https://myhub.autodesk360.com/ue2b114c8/g/shares/SH35dfcQT936092f0e43a9d5084dee87f7ba More info on Gridfinity can be found here: I…
Wydruk około 5,10 €–6,24 € nettoWstępna wycena jednego wariantu
Holds 16 608 Bearings. Yeah, the same ones you have left over from the fidget-spinner craze 🤪 Because these often have a thin coat of oil, I wanted to add a cover to keep them dust-free, but the lid is completely optional The block is…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
This is a tape dispenser for the Gridfinity modular storage system. It is compact at 1x2 squares, and features cutting teeth that split tape effortlessly. It is not possible to stack other blocks on top. This takes standard 2 inch tape…
Wydruk około 3,53 €–4,31 € nettoWstępna wycena jednego wariantu
Gridfinity screwdriver holder for Craftsman screwdriver set.…
Wydruk około 8,89 €–10,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was looking for small boxes to put accessories when using my Festool machines to don't have to always open the Systainer to take them Starting from a previous idea to hang my Mirka sander to its Systainer →…
Wydruk około 2,57 €–3,14 € nettoWstępna wycena jednego wariantu
Design description I needed a 6x1 bin and couldn't immediately find one. My print-bed is large enough to print it diagonally, so I didn't want to deal with sideless bins and simple created one myself. This has a height of ⅔, stackable…
Wydruk około 3,68 €–4,50 € nettoWstępna wycena jednego wariantu
This holder allows to store development boards with pins mounted on the bottom in Zack Freedman's Gridfinity system . As such boards come in various sizes (e.g. different ESP8266 or ESP32 boards, Raspberry Pi Pico, Arduino Nano, …), the…
Wydruk około 4,76 €–5,81 € nettoWstępna wycena jednego wariantu
There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…
Wydruk około 4,77 €–5,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Summery This is a Gridfinity tray to hold a tape measure. it works with a stanley 25' fatmax, and standard stanley 25'. History Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories…
Wydruk około 1,62 €–1,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gridfinity battery bins for CR2032-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 8 batteries. A 1x2x4 bin that fits 16 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena jednego wariantu
Holder for Dymo LabelManager 160 label tape, compatible with the popular Gridfinity organization system. More details on the Gridfinity system:
Wydruk około 6,22 €–7,60 € nettoWstępna wycena jednego wariantu
I liked the ideas for Gridfinity credit card holders that were already posted, but I had a slightly different use case, i.e., a shallower drawer, and felt it could hold more to maximize storage space. I don't use a magnet system, so I…
Wydruk około 5,11 €–6,25 € nettoWstępna wycena jednego wariantu
This model uses the Gridfinity plugin to Fusion 360. The modeling is fairly basic after that, a negative extrude with an edge fillet. This then uses the rectangular pattern feature to build out the rest of the slots for the batteries.
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
These hooks snap on to the back of standard gridfinity bins, in heights 2u, 3u, 4u, 5u, 6u, 9u and 12u, with space for the stackable lip. Please note that the lip is required - it's the mechanism that allows the hook to grab the bin. They…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
A single Hex bin with 2 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…
Wydruk około 3,92 €–4,79 € nettoWstępna wycena jednego wariantu
Matthew's Modern Gridfinity Case design is fantastic, but I find that it takes up a lot of desk space when hinged fully open. This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees. I…
Wydruk około 0,75 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can use any of represented materials as you would like, free of charge. Вы можете использовать любые представленные материалы как вам хочется, бесплатно. I printed it with these settings / Я печатал модель со следующими настройками:…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
Gridfinity Bin for gallon size ziploc baggies (3x7x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 28 to hold lid on, but only takes 12 to hold firmly. Print lids face…
Wydruk około 4,27 €–5,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Exciting Update to Our Hex Bit Holder Design! In response to the community's feedback and my desire to enhance functionality, I've rolled out significant updates to our beloved hex bit holder. Here's what's new: Increased Capacity:…
Wydruk około 7,58 €–9,26 € nettoWstępna wycena jednego wariantu
Gridfinity baseplate to hang to a Kupper (Küpper/Kuepper) pegboard (UE/EU/DE pegboard). Printed in PLA, it needs brim or adhesion disks under the pins (already present in the .3mf file). If you like it or you're having problems with it,…
Wydruk około 2,44 €–2,99 € nettoWstępna wycena jednego wariantu
A 1x1 Gridfinity pen holder for 5x pens up to 12mm in diameter. Pen holder now fits Pilot G2 pens.
Wydruk około 1,29 €–1,57 € nettoWstępna wycena jednego wariantu
A single Hex bin with 4 x 4 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Requested by @CG485_1311834 Look at my other HexBin's here:…
Wydruk około 6,35 €–7,76 € nettoWstępna wycena jednego wariantu
This is just a simple gridfinity bin for the CORE One Tools. There are two versions available.
Wydruk około 2,65 €–3,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gridifinity bind for CD or DVDs. The bins can be stacked. Included bins: Bin for 1 CD/DVD - size 3x3x1 (126x126x7 mm) Bin for 6 CDs/DVDs - size 3x3x2 (126x126x14 mm) Bin for 12 CDs/DVDs - size 3x3x3 (126x126x21 mm) Bin for 18 CDs/DVDs -…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
Gridfinity 5x4 Pen Holder, a sleek and efficient solution for organizing and displaying your collection of 18 pens. Contains magnet holes and can be stacked.
Wydruk około 13,63 €–16,65 € nettoWstępna wycena jednego wariantu
These hammer pieces are for holding various hammers that i have. hopefully the sizes fit for you. they are modular. I use these flat bins to fill in the voids. Individual I have 4 hammers - - 2.5lb ESTWING sledge - 2-1/2" rubber mallet…
Wydruk około 13,19 €–16,13 € nettoWstępna wycena jednego wariantu
A Gridfinity tool holder for an iFixit Kit.
Wydruk około 3,66 €–4,47 € nettoWstępna wycena jednego wariantu
Zach made some awesome caliper holders, but the hole for the magnet cannot be printed without major drooping and it's unusable without post-processing. I used a version of this “3D Print floating holes without support” to fix the bridging…
Wydruk około 3,06 €–3,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a 1x2 Gridfinity bin that holds the Wiha 40010 Magnetizer Demagnetizer. It is standing to keep on the desk and ready to use. It only takes up 2 grid units. If you are not using the Wiha 40010, this model will fit another…
Wydruk około 1,73 €–2,12 € nettoWstępna wycena jednego wariantu
Gridfinity battery bins for D-/R20-batteries. The bins can be stacked by using the included spacers. A 1x2x4 bin that fits 2 batteries. A 2x2x4 bin that fits 4 batteries. A 1x2x6 spacer that is needed to stack the 2-battery bins. A 2x2x6…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
I have a lot of button batteries. Inspired by Zach Freedman's Gridfinity OCD deep-dive and @ dhiltonp 's battery box, I wanted One Box to Hold Them All, so I made this monstrosity. It's up on Tinkercad so you can make edits through a web…
Wydruk około 6,16 €–7,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gridfinity battery bin for C-/R14-batteries. The bin can be stacked by using the included spacer. A 1x3x4 bin that fits 4 batteries. A 1x3x4 spacer that is needed to stack the battery bins. NOTE: The spacers are best printed upside down…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
A compact stackable Gridfinity 2x2x9 with two partitions, each partition fits 20 AA batteries or 6 C batteries. It is not ideal for C batteries as the batteries can be hard get when the partition is full. The base box is generated with…
Wydruk około 4,57 €–5,59 € nettoWstępna wycena jednego wariantu
Gridfinity Bin for quart size ziploc baggies (2x6x7). Use 6mm x 2mm magnets to hold halves together and lid on. Requires 6 to hold halves together and has spots for 24 to hold lid on, but only takes 8 to hold firmly. Print lids face down…
Wydruk około 2,65 €–3,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A single Hex bin with 2x3 Gridfinity and 6mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…
Wydruk około 3,25 €–3,97 € nettoWstępna wycena jednego wariantu
This 1x3 Gridfinity module holds a digital caliper horizontally. It is stable even without a baseplate. It is based on this model: https://www.printables.com/model/503777-caliper-stand @spikeon requested this 1x3 version so the head end…
Wydruk około 2,71 €–3,32 € nettoWstępna wycena jednego wariantu
About Remix of Aneng Multimeter stand, added 2x2 gridfinity base with magnets and a box on the back to keep probes in it add magnets and it will be even more stable added version with more ‘flat’ angle for better reading the screen,…
Wydruk około 3,54 €–4,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A remix of the battery storage tray by BenBreaksThings to hold two D batteries in ZackFreedman 's Gridfinity organization system. Since these can't be stacked with batteries in them, I remixed the original to remove the lip from the top…
Wydruk około 1,27 €–1,56 € nettoWstępna wycena jednego wariantu
This cutting stencil allows you to cut 5mm strips of double sided tape, that can be stuck to the underside of Gridfinity Baseplates, so they can be stuck rigidly inside a drawer.
Wydruk około 1,16 €–1,41 € nettoWstępna wycena jednego wariantu
Since the Alex drawers do not open fully, it is hard to reach the bins on the back of the drawers. This tray allows you to quickly remove bins on the front of the drawer, making it possible to slide the ones on the back to access them!…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
A single Hex bin with 2 x 4 Gridfinity and 4.5mm hight. The base is created with the gridfinity fusion 360 plugin from https://github.com/Le0Michine/FusionGridfinityGenerator Look at my other HexBin's here:…
Wydruk około 1,12 €–1,36 € nettoWstępna wycena jednego wariantu
Holder for aluminum setup blocks / spacers and 1-2-3 block compatible with the popular Gridfinity organization system. More details on the Gridfinity system:
Wydruk około 3,69 €–4,51 € nettoWstępna wycena jednego wariantu
Organize your crafting essentials with the Gridfinity 5x2 Holder, specially designed for Bosch Gluey and spare glue sticks. This holder provides a neat and accessible storage solution, ensuring your glue gun and extra supplies are always…
Wydruk około 10,22 €–12,49 € nettoWstępna wycena jednego wariantu
This holder organizes, but still keeps the original case. It was made to allowing opening without pulling the whole case out of the holder.
Wydruk około 9,86 €–12,05 € nettoWstępna wycena jednego wariantu
Ratchet holder for both 1/4" and 3/8" craftsman ratchets and a spot for a 1/4" bit to ratchet adapter. Fits on the standard gridfinity system. 5x3 cubes.
Wydruk około 5,37 €–6,57 € nettoWstępna wycena jednego wariantu
I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Stackable Gridfinity bins and a template filament sample card. Sample Bins The Gridfinity sample bins are stackable for easy storage in drawers. 1x2x6 bin that fits 10 filament sample cards. 2x2x6 bin that fits 21 filament sample cards.…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
A battery storage tray to hold three C batteries in ZackFreedman 's Gridfinity organization system. I needed a place to store C batteries that could also hold AA-to-C converters (shown in the picture) – the converters require a tiny bit…
Wydruk około 1,32 €–1,62 € nettoWstępna wycena jednego wariantu
Gridfinity bin socket torx key holder Supports torx keys size TX45, TX40, TX30, TX25 and TX20 The torx key including socket is 126mm (4 15/16") long and the socket ⌀ is ~17.5mm (11/16"). Used with 3/8" drive ratchet. The socket holder…
Wydruk około 5,31 €–6,49 € nettoWstępna wycena jednego wariantu
I included a 1 and 3 stick stand. I was putting “Elmers Washable School Glue Sticks" in the stands. They are 22g and about 27mm in diameter. I made the holes 29.5 for fitting and ease of removal and insertion. I printed mine at .28 with 1…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Store a Vaporesso using Gridfinity 1x1 Grid. Modified model to store two 10ml bottles of liquid on a Gridfinit here .
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
Custom Cutout Gridfinity Bin for Parkside PFBSA 4 A1 Cordless Rotary Tool (from Lidl) Bin is 5 x 2 units - doesn't fit the Mini printer, so I prepared also the split version with dovetail joint to fit the Mini printer. ℹ 1 split part (for…
Wydruk około 3,96 €–4,84 € nettoWstępna wycena jednego wariantu
Gridfinity storage for a Dymo LetraTag 200B Bluetooth Label printer. Size: 3x3x2.
Wydruk około 4,82 €–5,89 € nettoWstępna wycena jednego wariantu
A gridfinity charger for your Sonicare Toothbrush.
Wydruk około 3,42 €–4,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Nextruder Nozzle Wrench and Nextruder Heater Block Clamp are the most important combination of tools IMHO if you intend to regularly swap nozzles on your Mk4. So, I made this 1x2x4 gridfinity bin to keep them close by your printer.…
Wydruk około 1,55 €–1,90 € nettoWstępna wycena jednego wariantu
The Gen2 system (by Jerrari ) combined with Gridfinity is a flexible storage system. Why waste space when you can use it. So I added an extra column Gridfinity Half Grid (by HuMa ) to the empty space. The Gridfinity bins can have a height…
Wydruk około 4,36 €–5,32 € nettoWstępna wycena jednego wariantu
There are a couple of these out there, but I wanted one that had all the tool heads and the handle in this orientation. Its got magnet holes on the bottom and a chamfer on the top holes to aid insertion . The bin was made using the Fusion…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
Gridfinity - Gorilla Glue Organizer 1x2x4 Gridfinity glue organizer. Holds super glue and normal gorilla glue bottles. Prints without supports. Color change at layer 28.2 for coloring in photo.
Wydruk około 1,40 €–1,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a Gridfinity 1x1x6 sized bin that prints in vase mode with 2 walls and sports a nice hexagon pattern. Designed for a 0.4mm nozzle size and your vase mode print will be stronger if you change your external perimeter width size to…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
Holds 15 spools of thread that are 19.2mm diamater. Will be designing more sewing and crafting related Gridfinity bins. Organizing the sewing nook in our house with a combination of Gridfinity and Multiboard. Holes are 19.7mm to easily…
Wydruk około 1,77 €–2,17 € nettoWstępna wycena jednego wariantu
Design description Remixed the N147 Caliper holder as the design looked close enough to mine, but I had one of the 3 buttons on top of the display. Also included a slot for a spare battery, just because the block had room to spare. Link…
Wydruk około 2,41 €–2,95 € nettoWstępna wycena jednego wariantu
PCIe card holder colder, compatible with the popular Gridfinity organization system. Fits 2 1-slot cards in a 1x3 grid space. Based on a 1x3x1 (x,y,z) generated Gridfinity base platform from https://gridfinity.bouwens.co/
Wydruk około 1,58 €–1,93 € nettoWstępna wycena jednego wariantu
A 5x2 Gridfinity bin for the Wahl model 9649 hair clippers. Print with draft quality settings with low infill, but ensure more than 2 top layers to avoid the pillowing in my photo.
Wydruk około 4,89 €–5,98 € nettoWstępna wycena jednego wariantu
I was not satisfied with existing Citadel paint storages for Gridfinity so I created yet another one: Fits 10 bottles into 3x3 grid, that's 1 bottle extra compared to most other solutions Nice, strong handle to put the whole rack in and…
Wydruk około 6,00 €–7,33 € nettoWstępna wycena jednego wariantu
This has slots for 2x6 magnets in each of the four corners. Just add a “Pause Print" at the appropriate spot, and place them in!
Wydruk około 1,63 €–1,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Today I designed a whole collection of Gridfinity bins tailored specifically for the drawer beneath my monitor. Each bin has a different purpose, turning the drawer into a clean, organized workspace: Pen Grabber Bin — holds 6 pens with…
Wydruk około 5,61 €–6,86 € nettoWstępna wycena jednego wariantu
Gridfinity base mount on 40x40 extrusion panel. Print in 45° angle and use default support.
Wydruk około 0,75 €–0,91 € nettoWstępna wycena jednego wariantu
Transform your tool chest with this collection of Gridfinity organizers! Welcome to the world of Gridfinity, where organization meets innovation! If you've ever found yourself rummaging through a cluttered tool chest, searching for that…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
Here's a great way to secure you magnifying loupe in your drawer or on your bench. This unit is quick to print and will add security for your magnifying loupe. My Loupes measure 38.15mm at the large end and they fit perfectly in the…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
Stores 2k epoxy syringe + spatula for mixing + mixing area in front. Size is 5x1x4.
Wydruk około 5,21 €–6,37 € nettoWstępna wycena jednego wariantu
Box for Dremel Versatip with accessories. I made some small changes after the first print, didn't print it after the changes. So if there some changes needed please tell me. (Fighting with fusion360 after every update they make) 12.11.25:…
Wydruk około 12,59 €–15,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A Gridfinity box (size 2x3x4) for storing the original Prusa Accelerometer , designed for the Prusa CORE ONE 3D printers. The case is printed in two parts, the Gridfinity box and a cable holder snap-on to keep the accelerometer cable in…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
Gridfinity compatible abrasive disc tray. D.38 and D.22mm disc
Wydruk około 2,14 €–2,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This holder ensures secure and convenient storage for your rotary cutter, allowing quick access whenever creativity strikes. Contains magnet holes and can be stacked.
Wydruk około 9,61 €–11,74 € nettoWstępna wycena jednego wariantu
Gridfinity Holder for Magnetizer Demagnetizer Tool
Wydruk około 3,19 €–3,89 € nettoWstępna wycena jednego wariantu
This is for those random things like the shown Black & Decker Bit Mini-Case. It is a 2 x 2 unit and has a height of 2 units.
Wydruk około 2,27 €–2,78 € nettoWstępna wycena jednego wariantu
This cradle holds the Ferrex M7 multitool, a small dremel clone sold by ALDI in Germany. You can extract it from it's holder by either grabbing the tool from the middle, or, if that is easier for you, by pushing down on the spindle in…
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
My version of a breadboard holder for the amazing gridfinity system, as I wanted to use gridfinity to organise my whole electronics prototyping space. This bin has space for a 830-hole breadboard (JUST fits..), and a range of bits in a…
Wydruk około 6,22 €–7,61 € nettoWstępna wycena jednego wariantu
This is a custom-designed lightweight Gridfinity baseplate optimized for the IKEA NORDEN table drawer. The set includes two baseplates per drawer, each featuring a 3x4 Gridfinity layout. These baseplates were built using the Autodesk…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Tried to create a more robust design of a 2x4 gridfinity bin. If you need other sizes, let me know! The Bin is 2x4 Squares with a maximum hight about 6cm. The base is created with the gridfinity fusion 360 plugin from…
Wydruk około 4,20 €–5,14 € nettoWstępna wycena jednego wariantu
A while ago I designed an X-Acto knife disposal bin , but I wanted one that would fit in my gridfinity setup in my desk. So I designed this compact container that will protect you, and others, from old X-Acto knife blades. This model fits…
Wydruk około 1,23 €–1,50 € nettoWstępna wycena jednego wariantu
There are two variations of this model, one which is 1x3 Gridfinity units and can hold 3 pens / pencils, and one which is 2 units wide and can hold 6 of your favourite writing utensils. The slots for the pens are 11mm which I found to…
Wydruk około 1,44 €–1,75 € nettoWstępna wycena jednego wariantu
Contains both a single and double holder with rooms for the clips. Survival Kit Collection: https://www.printables.com/social/240789-stevew91/collections/296699
Wydruk około 4,79 €–5,85 € nettoWstępna wycena jednego wariantu
This Gridfinity tray is for this 13-Piece NEIKO 10074A Metric Hex Bit Socket Set .
Wydruk około 2,30 €–2,81 € nettoWstępna wycena jednego wariantu
Holds 4-5 DVDs/CDs in each tray. Finger holes for easy extraction. Stackable. I don't retain too many DVDs these days, but this keeps them where I can find them when I need them. The DVDs fit snug enough that they shouldn't scratch each…
Wydruk około 4,25 €–5,20 € nettoWstępna wycena jednego wariantu
Store all of your tape related things here! There's a spot for a tape measure and two half circles to hold tape or other circular things like an Oreo. Actually, fill up the tape measure bin with milk and dunk your Oreos, you could do that…
Wydruk około 3,48 €–4,25 € nettoWstępna wycena jednego wariantu
Gridfinity setup 2x8. Holds a Pinecil, 6 tips, and soldiering accessories from this kit specifically: https://www.amazon.com/dp/B0BJ9FDS5F?psc=1&ref=ppx_yo2ov_dt_b_product_details
Wydruk około 8,50 €–10,39 € nettoWstępna wycena jednego wariantu
designed to use M3 20-22mm screws and heat inserts.
Wydruk około 5,49 €–6,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holds two 12,5mm x 18,5mm x 41mm erasors and can be stacked. Has magnet holes on the bottom.
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
A 3x4x4 gridfinity storage tray for eighteen Hex shanked HSS drill bits. Comprises of a tray and two, clip in, hinged, bit holders. The two bit holders are numbered to indicate drill bit diameters from 2mm to 10mm in 0.5mm steps. The tray…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
So I'm trying out a concept with this design - which featured in my OLED model here: https://www.printables.com/model/1172417-gridfinity-1x1-oled-display-ssd1306 I have added 2 layers of ribs around the bin. These will ‘click fit’ a 1mm…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
This GRIDFINITY tray is design to store 5 µSD with an SD adaptation in a box
Wydruk około 1,08 €–1,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is a 2U x 4U 1U high Gridfinity bin specifically for the Anker 60W 6-Port USB Charging Station ( affiliate link :) ). This model allows you to also stack more Gridfinity bins on top of the charger while leaving the charger…
Wydruk około 6,55 €–8,01 € nettoWstępna wycena jednego wariantu
Survival Kit Collection: https://www.printables.com/social/240789-stevew91/collections/296699
Wydruk około 2,31 €–2,82 € nettoWstępna wycena jednego wariantu
This cradle lets you organize your Vanmoof S3 toolkit, in the gridfinity universe.
Wydruk około 17,10 €–20,90 € nettoWstępna wycena jednego wariantu
This Gridfinity block is designed to hold two containers of pencil lead as well as eight replacement erasers for the ends of mechanical pencils. The diameter for the pencil erasers which fit in the holes is approximately 4.5mm.
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
