P
PrintablesVidar
Hocks for Caravan and Camping car
3 different hooks and rings for sliding into caravan slider. For clothesline towels and other atachment.
- Pobrania
- 1493
- Polubienia
- 294
- Ocena
- 4,94
Wyniki wyszukiwania: hocks
87 modeli
P
PrintablesStrandedOrg
Hot Wheels Diecast 1:64 Scale Wheel Chocks
These wheel chocks will stop your Hot Wheels / Matchbox 1:64 cars from rolling around on unlevel surfaces. They work on the front wheels, back wheels or both. Very quick print! HW Chocks-ChockA is easier to print and comes off the build…
- Pobrania
- 1296
- Polubienia
- 244
- Ocena
- 5
P
PrintablesStrandedOrg
Hot Wheels Diecast 1:43 Scale Wheel Chocks
These wheel chocks will stop your Hot Wheels 1:43 cars from rolling around on unlevel surfaces. They work on the front wheels, back wheels or both. Very quick print! HW Chocks-ChockA_43 is easier to print and comes off the build plate…
- Pobrania
- 222
- Polubienia
- 58
- Ocena
- 3,5
P
Printablesgdrag
Chair chocks - Parking blocks for chairs with casters
This is useful if you have an office chair with casters and you want it to stop rolling around for some use or other, and also don't want to swap the casters only temporarily. You can stand a few of the casters on the blocks so that it…
- Pobrania
- 145
- Polubienia
- 17
- Ocena
- 5
P
Printablessopryshko
Hot Wheels Diecast Chocks (Multiple Sizes)
Stop your cars from moving on uneven surfaces with these 3D printed chocks. Available in 3 versions: 25mm – suitable for 1:64 scale model 30mm – generic version for Hot Wheels cars 40mm – for Team Transport trucks
- Pobrania
- 412
- Polubienia
- 90
- Ocena
- 5
P
PrintablesPeter
3D Printed Coil-Over Shocks
This shock is designed to be fully 3d Printed. All pieces minus the two TPU Gaskets and spring are meant to be printed from PLA. The Spring is designed to be printed from PETG. This print does require a good and finely tuned 3D Printed as…
- Pobrania
- 342
- Polubienia
- 103
- Ocena
- 0
P
PrintablesTeamK
Traxxas TRX4 Shocks - Mini-T Spring Perches
If you want to use Losi Mini-T springs on your Traxxas TRX4 shocks, these spring perches will allow you to make the conversion. The lower perch is designed to allow popping it off over the shock shaft without removing the rod end, so…
- Pobrania
- 324
- Polubienia
- 30
- Ocena
- 0
P
PrintablesMatthew Timbs
Shocks Tower for MJX Hyper Go 1:16 RC Car
Got a returned/broken RC car from a bin store. This is an MJX 1:16 scale Hyper Go buggy. The shocks tower (connects front shocks to frame) was broken. I printed a crude one from a not-to-be-mentioned printable model website, but wanted to…
- Pobrania
- 314
- Polubienia
- 23
- Ocena
- 0
P
Printableseagleeye
Volume spacer for Fox Float shocks
These are volumne spacers fiting for the Fox Float X (and other) shocks. It's fitting tight onto the shaft, but it's working ;-) I attached also the Fusion File so you can modify it for your needs. The both models are the copied 0.4in³…
- Pobrania
- 282
- Polubienia
- 24
- Ocena
- 5
P
PrintablesTeamK
Traxxas Big Bore Shocks - Mini-T Spring Perches
If you want to use Losi Mini-T springs on your Traxxas big bore shocks, for example p/n 2660, these spring perches will allow you to make the conversion (commonly used on 1/10 scale rock crawlers). This spring perch is designed to allow…
- Pobrania
- 211
- Polubienia
- 11
- Ocena
- 0
P
PrintablesPlasticyBits
DU Bushing Removal Tool Fox RockShox Shocks
This is for the 1/2" size DU Bushing for Fox and most other brands of rear shock Originally I ordered a new DU Bushing (rear shock eyelet bushing) and the bushing tool for my mountain bike. The bushing showed up; but the tool never…
- Pobrania
- 207
- Polubienia
- 21
- Ocena
- 5
P
Printablesbw3dp
Steelcase Leap wheel chocks
This is a chock for the casters/wheels of a Steelcase Leap office chair. V1 was a chock that allowed the wheel's weight to rest on the floor. Without the weight on the chock itself, the friction between the chock and the floor wasn't…
- Pobrania
- 155
- Polubienia
- 12
- Ocena
- 5
P
Printablesmartyx
Wheel chocks (car stoppers) for Bruder 2750 MAN Breakdown-Truck
Very simple and basic design (lacking details) of wheel chocks for Bruder 2750 MAN Breakdown-Truck. They serve to stop the car from falling down from the breakdown truck.
- Pobrania
- 122
- Polubienia
- 14
- Ocena
- 0
P
PrintablesZedic
Nikko F10 Frame Buggy Rear Shocks
Nikko F10 Rear Shock bodies. Fit Rhino, Bison, Super Lobo II, etc. If you are missing springs, they are about 60mm Long 14 mm ID 16mm OD. You can find replacement springs this size. Look for other 1/10 shocks. Tamiya Blitzer Beetle rear…
- Pobrania
- 109
- Polubienia
- 18
- Ocena
- 0
P
PrintablesRebelScum
LDRC Shock Preload Spacers - Fits WLToys Shocks
LDRC Shock Preload Spacers - Fits WLToys Shocks I made these for my LDRC 1899 RC and fit like a glove. 5mm Diameter. Will also fit WLtoys K989 and K969 RC's. Print 100% infill, no supports required. Enjoy!
- Pobrania
- 102
- Polubienia
- 14
- Ocena
- 0
P
PrintablesNUeB
Bumper & shocks saver for WLToys 124007 / 124017 RC car
While FPV driving, I randomly run into things. So I thought designing a bumper might be a good idea… Printing Bumper & shocks saver: PETG. Use modifier object for more infill where needed to increase strength. Bumper front part: TPU for…
- Pobrania
- 102
- Polubienia
- 15
- Ocena
- 0
P
Printables8bitmcu
Metal Shocks for 1:16 Truck/Crawler 4x4 RC Chassis
Working on my latest RC build, I realized off-the-shelf suspension shocks were surprisingly affordable. To bridge that gap, I designed these 3D printable adapters for them. Required Products WPL C14 C24 Shock Absorber 4x M2.5x12mm Screws…
- Pobrania
- 101
- Polubienia
- 29
- Ocena
- 5
P
PrintablesDaTryhard22
Spring Perch for Injora RC Crawler Shocks
Here is a link to the shocks that this spring perch was designed to fit: https://www.amazon.com/gp/product/B08GLYH98X/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
- Pobrania
- 99
- Polubienia
- 31
- Ocena
- 5
P
PrintablesPJ1974
Aircraft Wheel Chocks
We wanted a set of customised wheel chocks for our 4 seat Sling Tsi, so I designed a set. These were printed on a Creality K2Pro with Hyper PTEG. I have uploaded the STL file with no text as well as a .3mf file to make it easier for…
- Pobrania
- 94
- Polubienia
- 8
- Ocena
- 5
P
PrintablesStrandedOrg
1/24 Car Model Chocks
These wheel chocks will stop your 1:24 cars from rolling around on unlevel surfaces. They work on the front wheels, back wheels or both. Very quick print! The design does not requires a brim or supports. The .gcode is included to make it…
- Pobrania
- 91
- Polubienia
- 11
- Ocena
- 0
P
PrintablesQrome
Wheel Chocks for RC Planes - Reduce Hanger Rash
Reduce the hanger rash to your RC Planes that can happen during transport. Easy to print Wheel Chocks that can be scaled for your model. These were printed with Overture Matte PLA with 2 wall and 20% in-fill. Brick Red PLA:…
- Pobrania
- 77
- Polubienia
- 3
- Ocena
- 0
P
Printablesmikeeel
5,8mmX6mm id 3mm ball for rc car shocks mounts
rc car shocks mounts
- Pobrania
- 75
- Polubienia
- 6
- Ocena
- 0
P
PrintablesFurial
RUDE/Robak V2 RC Car - D3542 | 80mm Shocks
Update 11.03.2026 - fixed Right part of the chassis and the rear left arm - there were some incosistancies in between the left and right arms: Update to RUDE - 09.2025 I had some of the non-printed components available in my storage so…
- Pobrania
- 67
- Polubienia
- 10
- Ocena
- 0
P
PrintablesSilverBullet126
Axial SCX6 - Wheel Chocks
I travel a lot with my SCX6 in the trunk; it moved around a lot on its tray. Adding these kept it in place. You'll need to print two per wheel; you'll also need some ¼in rope/para-cord to connect them. I found it best to put the chocks…
- Pobrania
- 65
- Polubienia
- 5
- Ocena
- 0
P
PrintablesPhilip_604
Bushing Removal tool for Fox Shocks
Little helper to remove the bushings from FOX rear shocks. Print Settings Printer: Ender 3V2 Rafts: Doesn't Matter Supports: No Resolution: 0,2 Infill: 35 Filament: RedLine PLA/PETG Category: Sport & Outdoors
- Pobrania
- 55
- Polubienia
- 11
- Ocena
- 0
P
PrintablesSeparc
Pinewood Derby Car Holder - Wheel Chocks
Simple puzzle piece like wheel chocks for your Pinewood Derby.
- Pobrania
- 54
- Polubienia
- 4
- Ocena
- 0
P
PrintablesChris Golden
Office Chair Chocks
For gamers without carpet who want to push rudder pedals without their chair sliding away, place one of these under your office chair's wheels. Fits a GTRacing chair--likely others. I used PLA. No supports needed. Post-print: Add a piece…
- Pobrania
- 51
- Polubienia
- 9
- Ocena
- 5
P
PrintablesAllen Latter
Lawn bowls chocks markers
Lawn bowls or indoor bowls wedges. Work perfect Printed in PETG with large brim so edges dont curl up.
- Pobrania
- 46
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDMyers
Wheel Chocks for safe Transport in your car
My brother asked if I could print him a set of wheel chocks for his RC Plane so that it would not bump around in his car while be transported. The smaller set are for my PKZone Extra300 and the larger are for his PKZone warbird and my…
- Pobrania
- 46
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMike E
RC Shock Building Stand for 13MM Off Road Shocks
RC Shock Building Stand for 13MM Off Road Shocks, based off The Hudy Shock stand and Remixed from: KayJayFE on Thingiverse however I Moved and lengthened the standoff legs as well as created recesses so they can just push in without need…
- Pobrania
- 45
- Polubienia
- 5
- Ocena
- 0
P
PrintablesSharkovich
Cramer Truggy Shock Tower Brackets for Shocks With Ball Joints Remixed (3mm)
I could not remove ball joints from my shocks so I've remade @GetItPrint3d brackets. Also the rear one was not fitting great with the base, so I fixed that. This version also need heatset inserts for the screw. For this to work you will…
- Pobrania
- 42
- Polubienia
- 8
- Ocena
- 0
P
PrintablesMatts6345
Lego Car/Vehicle Chocks
I made this model as Extra security for my Lego vehicles on a shelf. Printed on Bambu X1. Its a simple print shouldn't have to do anything crazy. I used 3 Walls and 15% infill.
- Pobrania
- 41
- Polubienia
- 4
- Ocena
- 0
P
PrintablesSaNi1974
Schockset/ Schockbesteck Würfelspiel/ Dicegame
A friend of mine was looking for a new “Schocken” Set, but i couldn't find one with the right measurements in the web. So i took his old one andmade one with freeCAD. I made the stand in 3 parts, because i was not able to print it in one…
- Pobrania
- 40
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPlasticyBits
DU Bushing Removal Tool Fox RockShox Shocks
Ordered a new DU Bushing (Rear Shock Eyelet Bushing); plus a DU Bushing Tool for my for my mountain bike. The bushing showed up, but the tool never did...... So I decided to try a 3D printed one; which worked surprisingly well. Use a 4mm…
- Pobrania
- 39
- Polubienia
- 5
- Ocena
- 0
P
PrintablesZedic
Radio Shack Golden Arrow Shocks with Shock MountRepair Sleeves
Rear Shocks for Radioshack Golden Arrow, Sagitta I made these for my Radio Shack Sagitta, but I think they fit Golden Arrow and maybe other Nikko buggies. These are the rear shocks with the offset angle with the longer shock mounts on the…
- Pobrania
- 37
- Polubienia
- 8
- Ocena
- 0
P
PrintablesMichael
Wheel chocks for 3D Lab Print's WACO YMF–5
A set of chocks with the correct scale and height, as the wheel pants of the WACO are rather low. Additionally, the font and back chocks are joined which ensures that they will not shift if e.g. the plane is bumped.
- Pobrania
- 36
- Polubienia
- 2
- Ocena
- 0
P
Printablesmanyshrimp
Fox Bushing Spacer Crush Washer for MTB Rear Shocks
Replacement for Fox crush washer. Easy to lose when swapping shocks. Print PETG, 100% infill. 0.2mm layer height or less. Smaller nozzle is better to get the details, 0.4mm works fine. The reference picture is printed with 0.6 nozzle at…
- Pobrania
- 34
- Polubienia
- 3
- Ocena
- 0
P
PrintableslunarLarceny
1:38 Scale Model Wheel Chocks
Two variants of wheel chocks for a 1:38 scale model car. The first variant is a single chock for if your scale model has a different distance between wheels than mine. The second variant is two chocks, paired together for easy…
- Pobrania
- 34
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDrew Makes Gadgets
Wheel Chocks for my Pit Boss Pellet Smoker (100 mm wheels)
After a 35 mph wind blew my Pit Boss pellet smoker over (luckily no damage) i wanted to make something to keep it from sliding around. This is made for wheels that are 100 mm in diameter.
- Pobrania
- 32
- Polubienia
- 3
- Ocena
- 0
P
Printablesdavidsen
Tamiya TL-01 shock Tower for 90mm Shocks
Used these Shock towers to fit 90mm shocks to a Tamiya TL-01 chassis. Together with a reduction gearbox (I will upload this later) you can fit bigger wheels to get some kind of TL-01 crawler. There are also mounting points for Carson…
- Pobrania
- 31
- Polubienia
- 6
- Ocena
- 0
P
PrintablesO Potter
Sandy Shocks
it was my nephew's favourite so I re-created it.
- Pobrania
- 31
- Polubienia
- 6
- Ocena
- 0
P
PrintablesGavin Meyer
1/5 Scale Monster Truck shocks
1/5 scale monster truck shocks
- Pobrania
- 29
- Polubienia
- 4
- Ocena
- 0
P
PrintablesNicolas
Rockshox Shocks rebound/compresion tool
It goes on the rebound/compresion knobs and can be torned with a 8mm hex key
- Pobrania
- 27
- Polubienia
- 6
- Ocena
- 0
P
Printablesholicede
bike fender mount for jetson bolt pro using mtb shocks
bike fender mount for jetson bolt pro using mtb shocks
- Pobrania
- 26
- Polubienia
- 2
- Ocena
- 0
P
Printablesdmptrcks
Front Shock Tower for Hosim Q903/905 series (for 86mm shocks)
22nd iteration :) - You will need a strong but flexible material. I'm printing exclusively in Taulman 910 just for these and I have this tower mounted to 2 cars which have each taken some serious abuse. Designed to flex a great deal, but…
- Pobrania
- 25
- Polubienia
- 3
- Ocena
- 0
P
PrintablesCristian Chiracu
Shock piston replacement for MJX 1/16 shocks
I tried to refill the shocks for my MJX Hyper Go 16208, but 70 wt silicone oil was still too thin for them. so i printed the shock pistons to be able to remake the holes or just control the dampening from the diameter of the piston. The…
- Pobrania
- 25
- Polubienia
- 4
- Ocena
- 0
P
Printablesleftyfb
Anker Everfrost cooler wheel chocks
I made these to keep my Anker Everfrost cooler found sliding around in the trunk of our RAV4. We have the added benefit of having made a storage box for the chocks to be bolted to.
- Pobrania
- 24
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMarcus24
Shock Towers for 100mm shocks (for Truggy by Niko)
If you found my things useful, you can buy me a cup of coffee: http://paypal.me/marcuss24 Update - 15.05.2020 Added smaller version of front and rear shock towers for 100mm oil shocks. The original Shock Towers are for 110mm oil shocks.…
- Pobrania
- 24
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAMC 3D
estuche bandeja DIFF & SHOCKS
aqui dejo un practico estuche donde podremos repasar nuestro amortiguadores y diferencial organizado con pequeña bandeja para no perde un tornillo por la mesa es practico y cierre con juego de imanes.. de Neodimio, Imán Pequeño Redondo 6…
- Pobrania
- 23
- Polubienia
- 6
- Ocena
- 0
P
PrintablesVesela Houba
Volume spacer for Fox Float shocks - 2026 float with trunion
Remix of https://www.printables.com/model/166887-volume-spacer-for-fox-float-shocks for my 2026 Fox Trunnion
- Pobrania
- 23
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAndrew Murphy
rc shocks and tool holder
stand to hold all your tools and shocks that are being built or have to be built
- Pobrania
- 19
- Polubienia
- 5
- Ocena
- 0
P
PrintablesPotatoX
Propane Trunk Chocks
Chocks to prevent propane tanks from rolling around / falling over in trunk when going to get refills. Print Settings Printer: 3KU K3000 Rafts: No **Supports:** No Resolution: .400 mm **Infill:** 10% Category: Other
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBarras 3D
Twice As Sharp chocks
Corner chocks for keeping a TAS in place Easy to lift out if you don't want to screw down the TAS You'll need 4 of them (obviously) if you like this model then please donate to the Sanjay Mortimer foundation…
- Pobrania
- 17
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSilverTriple
Kyosho Legendary Series Shocks Gasket Helper
I built a few Kyosho legendary series kit, and one step is always difficult. Last time, I did not thought about this, but it's always hard to put the shock gaskets in place, and sometimes you break one. This is my own attempt to solve the…
- Pobrania
- 16
- Polubienia
- 1
- Ocena
- 5
P
PrintablesGeekdad_3D
Bebop landing shocks
Just a little remix to give the Bebop a little shock absorption upon landing. There are right and left versions. Also should fit without removing the rubber plugs but I took them out anyway. UPDATE Made the legs a bit thicker as my first…
- Pobrania
- 16
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPractical Prints+
Spring Free No Supports K'nex Suspension/Shocks
These are Spring Free No Supports K'nex Suspension/Shocks. Good for use in k'nex vehicles. there are 2 versions, one with more articulation and one with less articulation. Only takes 14 minutes to print!
- Pobrania
- 15
- Polubienia
- 8
- Ocena
- 0
P
PrintablesDavid A.
Adapter for Traxxas Big Bore shocks to Desert Lizard springs.
Using Traxxas Big Bore shock with Losi mini t springs is a common mod to getting a good shock for crawling. Losi mini t springs are hard to find lately (at least where I live) but Desert Lizard springs are common but they do not fit as…
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
Printablesrb
Compression Damping Knob for Manitou Skareb Elite Shocks
Quick print for an adjustment knob for Manitou Skareb Elite MTB Shocks (circa 2003). Mine broke after many years of service. If anyone else still uses these and also needs to replace the knob, this print may be of use. PETG is fine for my…
- Pobrania
- 14
- Polubienia
- 2
- Ocena
- 0
P
PrintablesGeekdad_3D
Bebop landing shocks
Just a little remix to give the Bebop a little shock absorption upon landing. There are right and left versions. Also should fit without removing the rubber plugs but I took them out anyway. UPDATE Made the legs a bit thicker as my first…
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRene Berthold
Piston for tamiya Shocks
As the piston on my shock absorbers was broken and I didn't want to order online because of a component costing a few cents, I designed the piston. Printed in PLA, diameter 10.89mm. The installation is done simply by replacing the old…
- Pobrania
- 12
- Polubienia
- 2
- Ocena
- 0
P
Printablesdamasus32
CO2 5 lb tank chocks
Simple, easy-to-print chocks designed to securely hold a 5-lb aluminum CO2 tank in place. Keeps your cylinder from rolling during transport. Print two Suggest 3 perimiters and at least 15% infill No supports needed
- Pobrania
- 12
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRosti
410mm ext dia Wheel Chock / Chocks
Simple PETG chocks for 410mm external diameter wheel + tyres, for use on un-braked trailers Prints on side without support. 30% in-fill. Threads with 12mm nylon cord. Those pictured had the reg number recessed. STL's and BGcode are…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
PrintablesFilamentality
Shocks dumper piston 7mm
Shocks upgrade, or replacement PISTON for oil filled rc car shocks. V1: csa 7mm x 2mm, shaft hole 2mm, went holes 1.5mm x4 V2: csa 7mm x 2.5mm, shaft hole 3mm, went holes 1mm x4
- Pobrania
- 12
- Polubienia
- 4
- Ocena
- 0
P
PrintablesChris
Spartan SR Boat Trailer - Wheel Chocks
Here is a set of wheel chocks for the Spartan SR trailer. The model includes the coloring to mimic the actual Spartan SR logo.
- Pobrania
- 11
- Polubienia
- 7
- Ocena
- 0
P
PrintablesJustblair
Wheel Chocks for Office Chair
It's a pretty obvious one this, doesn't need low layer heights, works well in PLA. I used 30% infill on mine and glued cork sheeting to the underside. I made 5, but I only really need to use 2 on my chair. The chock is designed for 50mm…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
PrintablesB3dlam
T'au Devilfish Pattern Vehicle Chocks
These allow you to semi-securely transport your T'au Devilfish pattern vehicles without needing to modify the models. The small piece secures the front landing gear and the rear piece holds both rear landing gear. You will need 5 -- 5x2mm…
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesShrakner
Leveling Wheel Chocks
I needed to level a new cabinet on caster wheels, so I came up with this design for adjustable-height wheel chocks! Turn the two threaded rods with a screwdriver to raise and lower the wheel and level your furniture. Print the front,…
- Pobrania
- 11
- Polubienia
- 6
- Ocena
- 0
P
PrintablesBrelicorne
Associated B6 B6.1 B6.2 B6.3 B6.4 inverted rear shocks
print in 0.15 100% full filled in pla abs or petg add 0.5mm shim and 20mm m3 hex screw for rear arm
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJedidiah Allen
S24 Ultra Phone Shocks Bone Conduction Headphone Mount with Blue Bird RV Logo
My dad drives an old Blue Bird RV camper and wears Shocks bone conduction headphones while driving. But he needed a spot to store them when not wearing them and wanted it to attach to his phone. His design had his nickname and the Blue…
- Pobrania
- 8
- Polubienia
- 3
- Ocena
- 0
P
PrintablesGriffin
String Potentiometer Mount for Afco Shocks (SAE BAJA)
Created for shock testing for the MSU SAE BAJA Racing team Single slide-on model and two-piece clam shell model (two piece is more complete) for measuring the travel Model for String Potentiometer SP1-12…
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesStrandedOrg
Kyosho Mini-Z Wheel Chocks
These wheel chocks will stop your Mini-Z cars from rolling around on unlevel surfaces. They work on the front wheels, back wheels or both. Very quick print! Fits wide and narrow wheel offsets. The design does not requires a brim or…
- Pobrania
- 7
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMichael Hathaway
Light Duty Wheel Chocks
Light duty wheel chocks with recess for magnets. Step file included Please leave me a “Like” Thank you for downloading
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesQuantumDesign
LDRC 1/18 Drift Chocks
🏎LDRC 1/18 Drift Chocks!🏎 Any Drift Car For 1/18 Scale
- Pobrania
- 6
- Polubienia
- 2
- Ocena
- 0
P
Printables4Crawler
Sleeves for Bilstein Shocks for the rear axle on a VW Pickup (Caddy)
These sleeves can be used to modify Bilstein rear shocks for a Volvo 760 (p/n: FA-B46-0296-H2 or 24-002967) to fit the VW pickup rear axle. Bilstein never made a specific shock for the rear of the VW pickup, but they do make some strut…
- Pobrania
- 5
- Polubienia
- 1
- Ocena
- 0
P
Printablesdave.pinnock
Traxxas TRX4 GTS Shocks Spring Retainer
Lost one of my Spring retainers and couldn't find a fitting model online so designed my own
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
PrintablesTheKwijibo
HandleBar Light Bracket for Specialized Vado SL with RedShift ShockStop Stem
Print in TPU for bomb-proof usage. Use two zip-ties to secure to the stem. No supports needed.
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJakeItsTheCops
Arrma Pivot Balls for Shocks and Arms - 223s and 1/10th scale models
Fits your warn arms and shocks. Really tightens up the steering the suspension. Also works well for the Quake/Gorgon wide kit. Print in TPU at .16 layer height
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
P
Printables
Propane Trunk Chocks
Chocks to prevent propane tanks from rolling around / falling over in trunk when going to get refills. Print Settings Printer: 3KU K3000 Rafts: No **Supports:** No Resolution: .400 mm **Infill:** 10% Category: Other
P
Printables
RUDE/Robak V2 RC Car - D3542 | 80mm Shocks
Update 11.03.2026 - fixed Right part of the chassis and the rear left arm - there were some incosistancies in between the left and right arms: Update to RUDE - 09.2025 I had some of the non-printed components available in my storage so…
P
Printables
Metal Shocks for 1:16 Truck/Crawler 4x4 RC Chassis
Working on my latest RC build, I realized off-the-shelf suspension shocks were surprisingly affordable. To bridge that gap, I designed these 3D printable adapters for them. Required Products WPL C14 C24 Shock Absorber 4x M2.5x12mm Screws…
P
Printables
Aircraft Wheel Chocks
We wanted a set of customised wheel chocks for our 4 seat Sling Tsi, so I designed a set. These were printed on a Creality K2Pro with Hyper PTEG. I have uploaded the STL file with no text as well as a .3mf file to make it easier for…
P
Printables
Volume spacer for Fox Float shocks - 2026 float with trunion
Remix of https://www.printables.com/model/166887-volume-spacer-for-fox-float-shocks for my 2026 Fox Trunnion
P
Printables
High Articulation Lego Technic Suspension/Shocks
These designs are lego suspension with higher articulation. each file has different connectors in different orientations.