34 337 modeli
News March 20, 2022 added bigger hook March 21, 2022 added USB flash drive holder March 21, 2022 added hooks (12mm and 25mm, screwed with M3 screw) March 21, 2022 added box (screwed with M4x10 screw) March 21, 2022 added 2 wall parts…
Wydruk około 1,84 €–2,24 € nettoWstępna wycena jednego wariantu
Phone Stand with honeycomb structure, it also has a place for charging your phone. I recommend you print this on its side, I printed it with some custom supports. However, I don't think you'll need supports if you print it on its side. I…
Wydruk około 2,64 €–3,23 € nettoWstępna wycena jednego wariantu
🏆 Thrilled to share that I've been nominated for Platform Designer of the Year at the 3D Printing Industry Awards 2026! If you enjoy this model, I would be incredibly grateful for your vote. [Click here to vote for Thorin Oakenshield]…
Wydruk około 6,45 €–7,88 € nettoWstępna wycena jednego wariantu
Headphone Stand by MakerBot - Thingiverse
Wydruk około 4,87 €–5,95 € nettoWstępna wycena jednego wariantu
A remix of mistertech's headphone holder with a reversed cord holder. Works on desks up to 40mm thick.
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
phone stand with flexible design
Wydruk około 1,83 €–2,24 € nettoWstępna wycena jednego wariantu
Headphone holder for M4 countersunk screws Model without holes https://www.prusaprinters.org/prints/16725-headphone-holder Bigger version https://www.prusaprinters.org/de/prints/43493-headphone-holder-big
Wydruk około 2,21 €–2,70 € nettoWstępna wycena jednego wariantu
Originally the remix of the ingenious Car Vent Gravity Phone Holder by Abdel Darwish that in the version V3 I remodeled from the scratch, keeping the original idea and general outline. Main changes in V4 (2025-07-26) Changed parts : Arm…
Wydruk około 1,18 €–1,45 € nettoWstępna wycena jednego wariantu
A simple but characteristinc design for a modern headphone or headset stand. Great to display or rest your device on your desk. Best to print in - no special settings required, standard print settings are just fine Happy printing!
Wydruk około 3,49 €–4,27 € nettoWstępna wycena jednego wariantu
Recently I designed a very rugged Tablet Stand for a Tradeshow booth that used quite a bit of unique hardware. After posting the design on Reddit and getting feedback, I decided to try and duplicate the design without using any hardware…
Wydruk około 10,61 €–12,96 € nettoWstępna wycena jednego wariantu
Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
A Minimalist IPhone case with hexagonal Design on the back and a nice snug fit. Works fine with Both PLA and PETG.
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
A simple bookend with a honeycomb pattern on the visible face. No supports required, no post-processing. Just a clean and simple print. The visible face is about 120mm wide by 140mm tall. The base is 120mm square. I printed in CF PC blend…
Wydruk około 6,21 €–7,59 € nettoWstępna wycena jednego wariantu
BACKGROUND: The QMX , (tr)uSDX and Elecraft KX2 and KX3 are fantastic portable radios, but the microphone for the KX2/KX3 is relatively big and heavy, and there really is no good mic option for the (tr)uSDX. So, I decided to design one.…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An amplifier for your phone. Makes a noticeable difference in increasing sound and enriches the usual 'tinny' sound that your phone speakers give off. I was able to measurea 5-6% increase in volume. The amplifer should suit most modern…
Wydruk około 10,56 €–12,91 € nettoWstępna wycena jednego wariantu
Since this stand is pretty big I split it into two pieces which can be printed together on one plate on the Prusa i3 MK3S. The print does not need any supports when printed as setup in the “Headphone Stand Split Complete.3mf” file or if…
Wydruk około 6,75 €–8,25 € nettoWstępna wycena jednego wariantu
Simple under-desk headphone holder. Uses minimal material and is easy to attach with screws. Fits up to 30mm wide headbands. Print instructions: 3 perimeters Detect thin walls
Wydruk około 1,28 €–1,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to use the original model , by herbert , on my electronics bench, but it does not have a pegboard, so I remixed it to mount with screws or double-sided tape. This model matches the Pegboard Screwdriver Holder (7mm honeycomb and…
Wydruk około 3,52 €–4,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
GOAL : Mount a display (phone in this case) below the monitor in my home office. This display shows my agenda, provides controls for lights, AC and shows temperature/time. In the (near) future it will provide more controls and info.…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
A friend of mine wanted a phone stand but he wanted enough room to plug his phone in while using the stand. He really wanted something that looked like the groovi monster so I came up with this. I modelled it in AutoCAD which proved to be…
Wydruk około 19,29 €–23,58 € nettoWstępna wycena jednego wariantu
Jedná se o remix stávajícího držáku z Thingverse. Upravena šírka plochy pro třmen sluchátek, délka šroubu a jeho závit. Pro lepší fixaci ke stolu je možné na dosedací plochu přilepit tenkou gumu. Pro tisk bez podpor je nutné držák…
Wydruk około 1,41 €–1,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wasn't too impressed with the selection of headphone clamp holders here on Thingiverse, so decided to make my own version. This design uses a moveable clamp protector located at the end of the tightening bolt so that when you do tighten…
Wydruk około 1,33 €–1,62 € nettoWstępna wycena jednego wariantu
Combo headphone hook holder and a single SD card holder. I've originally made the hook for my Koss Porta Pros, which have a very narrow headband. Due to popular demand, I've also added a version for wider headbands. And there's also the…
Wydruk około 3,33 €–4,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The idea was to have a simple and clean looking stand, which can hold bigger phones (5.5 inches for the phone in the picture) or phones which are protected by a thick case. I also made sure to keep this thing easily printable, without any…
Wydruk około 4,76 €–5,82 € nettoWstępna wycena jednego wariantu
So, COVID_19 has you stuck at home, binge watching Game of Thrones (again), and you need another beer (not Corona, that wouldn't be cool) so you go to put down the headphones that your wife makes you wear because she's sick of your choice…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena jednego wariantu
easy to print without support For every headphone
Wydruk około 5,43 €–6,64 € nettoWstępna wycena jednego wariantu
Made this for my sis to hang her headphones. A lot of hangers are great and waste less filament, but I wanted to make her something special. Holds my big MDR-Z7s no problem, you could scale down if you have smaller cans. You can fix it to…
Wydruk około 5,88 €–7,19 € nettoWstępna wycena jednego wariantu
I liked this command strip mount for the honeycomb wall , but I prefer that the command strips be mounted to the side of the wall (vertical) rather than the top (horizontal). Also, I use 4 wall segments in a grid, and needed a double…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
D: Schutzhülle für das Apple iPhone XR. Ich habe zwei Modelle gezeichnet eines mit Rückseite und eines ohne (Bumper-Hülle). Ich habe die Hülle in PLA als harte Hülle und in FLEX als flexible Silikon ähnliche Hülle gedruckt. Die Hülle ist…
Wydruk około 3,41 €–4,17 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed (use tree supports, build plate only) Scale it as you like :)
Wydruk około 18,09 €–22,11 € nettoWstępna wycena jednego wariantu
A new keychain for use with your smartphone. Small, practical and fun keychain with different forms of animals. In addition making a keychain, you can use it to stand the smartphone. https://youtu.be/VMJjUnYXQE4 I used this filament:…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Ein Mikrofon mit Ständer und abschraubbarem Kopf zum Verschenken von Eventgutscheinen. A microphone with stand and unscrewable head for giving away event vouchers. Print instructions Gedruckt in PLA mit 0,2mm Schichtstärke. Länge: ca.…
Wydruk około 2,36 €–2,88 € nettoWstępna wycena jednego wariantu
Please click if you appreciate my work :) The dimensions of the opening are 80 x 15 mm, which allows for the placement of most phones. >> You can buy me a coffee here : ) << Commercial license: https://cults3d.com/:2860697
Wydruk około 11,47 €–14,02 € nettoWstępna wycena jednego wariantu
This little helper works as a cell phone stand and shopping cart hijacker. Its printed in place and can be folded to be stored in your pocket. The print time only takes 37 minutes. You may need to carefully break the hinges free after…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Changelog Honeycomb Wall Compliant Mechanism Clip Mount 2023-01-08 v1.2 Horizontal variant added 2022-12-11 v1.1 changed geometry and printing orientation for easy support removal and more reliable fit 2022-12-09 v1.0 initial public…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Headphone holder_dzino, Headphone holder_dzino2025
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
iPhone phone stnad
Wydruk około 3,89 €–4,76 € nettoWstępna wycena jednego wariantu
This model provides a representation of the overall dimensions for the iPhone Duo, to evaluate how it feels in the hand, and whether or not it will fit in your pocket. It was modeled using overall dimensions announced by Apple (not a…
Wydruk około 3,17 €–3,88 € nettoWstępna wycena jednego wariantu
This is a simple wall mount for a PS5 official controller and headphones. Just print everything out of PETG (I used Prusament PETG) and glue it together with superglue. To fix it on a wall, use Mamut Glue or similar one-component glue.…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Desk Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a horizontal desk up to 22 mm thick . It features a simple and elegant design…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
This unique Print-in-Place keychain can hold your phone upright or sideways so you can watch videos on the go. Prints in under 40 minutes with no supports and is ready to use straight off the printer. The snap in design is satisfying and…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena jednego wariantu
The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates, Blender source file, and more detailed instructions. Go to my site for an overview of my other models . Only a few of…
Wydruk około 2,48 €–3,03 € nettoWstępna wycena jednego wariantu
If you want a ridiculously over-designed (over-artisted?) solution for holding your phone, this i the model for you! :) My goal was for it to not really look like a phone stand when it wasn't in use. I also didn't want the model's face to…
Wydruk około 13,98 €–17,08 € nettoWstępna wycena jednego wariantu
I remixed SchuMaker's Smartphone Holder Design with honeycomb on the bottom part. Just filled the hole on the bottom with fusion360 and added a modifier to remove top and bottom layers.
Wydruk około 3,61 €–4,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This project is inspired by “Honeycomb storage wall” project by RostaP, but NOT COMPATIBLE with it. My honeycomb plate has different dimensions and its walls are thicker and more solid. This project is not finished. New components can…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted a wall hanging frame for my selfprinted photos wich didn´t need much filament and looks fancy ;) The frame is scalable through the parameterized f3d file. Depending on your printers print quality, the inner frame sit´s tighter or…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu
Bedside charging station for your phone, Samsung Galaxy Watch 4. I have a Galaxy S9+ but it should work with most phones. This may work with other chargers also. The Watch charging base is 33.5mm wide x 9mm deep.
Wydruk około 5,62 €–6,86 € nettoWstępna wycena jednego wariantu
This Ikea Skadis pegaboard accessory comes in beautiful honeycomb pattern and can hold many things, like pliers, scissors, caliper, cables and probably many more. I got inspired by the remixed model and made a new version that is hex all…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Modern Telescopic Phone Amplifier: Stylish Sound Enhancement Product Description: Introducing the modern telescopic phone amplifier, a stylish solution for enhancing your phone’s audio experience. This innovative design features a…
Wydruk około 7,38 €–9,02 € nettoWstępna wycena jednego wariantu
I recently got my Prusa Mini+. After printing some addons, I searched for something to highlight the hexagons in the front plate. Since I couldn't find exactly what I wanted, I created these little insets in tinkercad. On my front plate,…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
I wanted to remove the radius overhangs on the print but realised the original STEP files were exports of the STL so I've exported clean STEP files as well as made my minor tweaks. Thread was changed to GL20 thread to hopefully improve…
Wydruk około 4,16 €–5,08 € nettoWstępna wycena jednego wariantu
This versatile phone stand is designed to securely hold your smartphone in both portrait and landscape orientation. The geometry is fully optimized for support‑free 3D printing, ensuring clean results, shorter print times, and efficient…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
printed with PLA, but can be Petg or TPU. TPU would be best choice. If you need some help, or need change the sizes please contact me
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
UPDATE - 3-15-2023 This case is meant to be a little loose in order to protect your expensive in-ear monitors or earbuds from getting tossed around or wound tightly which can add wear and tear and strain cables over time. BUT i always…
Wydruk około 4,39 €–5,37 € nettoWstępna wycena jednego wariantu
A reinforced bookend (for taller or heavier books) with a honeycomb pattern on the visible face. No supports required, no post-processing. Just a clean and simple print. The visible face is about 120mm wide by 140mm tall. The base is…
Wydruk około 0,60 €–0,74 € nettoWstępna wycena jednego wariantu
A very minor improvement to the screw mount remix of the honey comb screwdriver holder. This version Has fillets/chamfers around the outside edges to make it more pleasant to touch. The screw holes are slightly widened for M4 countersunk…
Wydruk około 2,58 €–3,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I completely remade the holder but used the original as an inspiration. Watch out, dimensions are probably different and therefore not compatible with the original. The original design by @kitlaan had "lips" that interlocked together to…
Wydruk około 10,65 €–13,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This are protector for the expensive original Apple Lighting cable, develop this thing to try to avoid buying new cables twice a year. Better if printed in TPU or flexible material, but works with PLA and ABS or Petg Basic setting, 0.2…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
Optimized for Prusa MINI+ (18x18cm) No supports No other parts needed
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
Material black and white filament (PLA, PETG, …) USB-C or lighting cable concrete or plaster for base (optional) Printing side panels (white) Printing the side panels is quite tricky with a FDM printer because of all the wobble. I printed…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena jednego wariantu
If you like my work please support me. :-) Buy me coffee at ko-fi.
Wydruk około 0,94 €–1,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a quick a dirty version of the Honeycomb Wall PS5 Controller Mount. Got a hold of a Dualsense Edge controller and wanted to make a new mount that would allow owners of these controllers to still use the Honeycomb wall. Works with…
Wydruk około 1,85 €–2,26 € nettoWstępna wycena jednego wariantu
01.12.2024: Added a version without the logo as requested as well as a step file so you can add custom logos if you want to. I created this model in order to use my phone with a QuadLock Mount I bought. It just goes on the back of a…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Phone mount for the Concept2 Model-D Rowing Machine. I was not happy with how the other mounts I found placed the devices above the rower display. Felt too high and unnatural to use during a work out. I created this one to mount just…
Wydruk około 2,22 €–2,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is just a simple rescale of the original for use with tablets. I liked misterT's remix of jonnig's phone stand , especially the stronger front hinges, which tend to break easily in the original. But the "medium" version is too small…
Wydruk około 3,39 €–4,14 € nettoWstępna wycena jednego wariantu
A cool looking phone stand with a passive speaker! This stand amplifies the volume of your phone speaker. It is also possible to charge your phone while listening to some tunes! The socket is slightly angled, so you can use your phone…
Wydruk około 14,43 €–17,64 € nettoWstępna wycena jednego wariantu
Combined Stand for iPhone, Apple Airpods and Apple Watch. For Wireless loading an IKEA NORDMÄRKE QI-Charger is used. Works great with iPhone 8 and iPhone Xs (also with original Apple Case). For Watch and AirPods the original loading…
Wydruk około 17,24 €–21,07 € nettoWstępna wycena jednego wariantu
It's a remix of the Big Einsy Case cover with hexagonal holes and Prusa logos. Big Einsy Case HoneyComb remix also available : https://www.prusaprinters.org/fr/prints/67408-big-einsy-case-honey-comb-remix Big Einsy Case HoneyComb remix…
Wydruk około 2,07 €–2,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Use glue for the top
Wydruk około 3,71 €–4,54 € nettoWstępna wycena jednego wariantu
Want to have a cool place to put your headphone? Print yourself this nice retro item! All parts are seperated so you won't need a MMU, just print them in your desired colors. Assembly is pretty straight forward, just put all pieces…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
This is a small remix of a creditcars size stand. This is only 3 x 6 cm and 3mm thick. It takes only 30-40min to print.
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
This very fast print can be mounted over any selfie camera (mainly designed for Tesla interior cameras). If you use it for laptops, ensure that it does not damage your display (as the Slider is not flush with the housing. Be sure to print…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Remix of this model https://www.thingiverse.com/thing:4694896 to store two controls and a headset
Wydruk około 5,48 €–6,70 € nettoWstępna wycena jednego wariantu
This is a very practical smartphone stand / tripod, wich is perfect in many usecases. For assembly, you will need: 1x M5 65mm bolt 2x M5 25mm bolt 3x M5 nut Feel free to share your own experiences with the community! This smartphone stand…
Wydruk około 5,36 €–6,55 € nettoWstępna wycena jednego wariantu
This is a replacement part based on the WindTech CC-6 Mic Stand Cable Clip for microphone stands and boom poles. My brother has a set of these from Sweetwater they work great. Eventually a couple ended up breaking, so I designed a…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Bookshelf Mountable Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a bookshelfs vertical stands ranging from 18 mm thick up to…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
One piece Best way to call Don Quichotte Doflamingo
Wydruk około 4,75 €–5,80 € nettoWstępna wycena jednego wariantu
Phone case for the Samsung A22 Printed in PETG or PLA. Printable in TPU with adjusted scale-factors. (x,y: ca. 99% ; z: ca. 105%) More 3d-printing tips on my website:…
Wydruk około 3,52 €–4,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Originally, I was planning on printing a similar smart phone holder from Thingiverse ( https://www.thingiverse.com/thing:4982411 ), however, something looked subtly wrong about that design. Eventually, I decided to roll my own, learn…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
Update : I've added another stl file to fit larger remotes. A simple remote caddy that can hold up to 4 remote controls and few accessories. The slot in the front of the caddy can either hold an accessory (like the headphones) or it can…
Wydruk około 6,15 €–7,52 € nettoWstępna wycena jednego wariantu
HexDish SignalBoost: Amplify Your Cell Signal Outdoors The SignalBoost HexDish is a modular parabolic reflector designed to enhance cell signal reception in remote areas like forests, campgrounds, or anywhere with limited coverage.…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
A new keychain for use with your smartphone. Small, practical and fun keychain with different forms of animals. In addition making a keychain, you can use it to stand the smartphone. https://youtu.be/VMJjUnYXQE4 I used this filament:…
Wydruk około 0,71 €–0,86 € nettoWstępna wycena jednego wariantu
An ideal accessory for your Halloween costume. This keychain will help you to hold your smartphone or as a card stand. Print instructions Category: Accessories Print Settings Printer: prusa i3 Rafts: No Supports: No Resolution: 0.2…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu
Assembly list of non-printed items MAGNETIC HOLDER METAL PLATE FELT PADS GLUE THE METAL PLATE AND FELT PADS TO THE BACK OF THE HANDLE. THE FELT PADS PROTECT THE CAR COMPONENTS FROM SCRATCHES. Holders for iPhone 11 and IPhone 12 mini
Wydruk około 1,90 €–2,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Der Ständer hebt das Notebook um ca 5cm an. Dadurch passt es besser zum zweiten Hauptbildschirm und ist ergonomischer. Darüberhinaus sorgt für bessere Luftzufuhr zum Notebook. Neben den beiden Seitenteilen besteht der Ständer aus zwei…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I really enjoyed Sneaks' wonderfully designed Adjustable Stand and how well it works for tablets. Wanting a smaller version that fits for my phone, I scaled down the parts, removed material from the bases, and slightly modified the hooks.…
Wydruk około 3,36 €–4,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple standard microphone stand adapter from 3/8" to 5/8". Made with fusion360.
Wydruk około 0,31 €–0,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my horizontal "widescreen" HoloBox for Smartphones, based on Pepper's ghost illusion technique. Superb for advertising stuff! Very easy build! Print out the two halves snap them together (they have snap-joints). Slide in the…
Wydruk około 8,88 €–10,86 € nettoWstępna wycena jednego wariantu
A phone stand inspired by La Linea a.k.a Lineman a.k.a Linus på linjen. Cutouts in “shelf” to keep the speaker and michrophone free from obstruction.
Wydruk około 4,77 €–5,83 € nettoWstępna wycena jednego wariantu
Here is a new remix of the fabulous Big Einsy Case designed by Boogie. Having already redesigned the cover with a honeycomb pattern, I figured that a remix of the case with the same pattern could make a cool bundle. I also drilled the…
Wydruk około 13,30 €–16,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- The perfect magsafe charging dock for your iPhone - simple design, two Parts, four options for angle and tilt. - Easy to print (no supports) and easy to assemble. Just click in your magsafe charging port. Print Settings · model in…
Tesla Supercharger Phone Charger! The original design didn't fit type C cables so i remixed it, i uploaded the full charger in each folder for easy download but the only part that differs is the Red Middle. The Type C socket is made for a…
Wydruk około 0,90 €–1,11 € nettoWstępna wycena jednego wariantu
I stacked 10 of the original honeycomb wall part on top of each other and separating them with a thin layer gap for easy separation. I also used ironing on each layer to make the separation of the pieces easier. The piece is turned upside…
Wydruk około 48,28 €–59,01 € nettoWstępna wycena jednego wariantu
Skoda Fabia 1 (1999 - 2007) phone holder on dashboard Diameter of the ball is 17mm I used the Baseus Car Phone Holder from Aliexpress as the holder itself https://s.click.aliexpress.com/e/_DBAMS11 It is necessary to print the model split…
Wydruk około 1,50 €–1,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can use any 15mm, 17mm or 1 inch ball attachment to add a phone/accessory mount or charging to your dash. It clips in the decorative channel between the screens with a little pressure. This model is inspired by the mounting meathod…
Wydruk około 3,61 €–4,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here is my iPhone Monitor Mount, the perfect solution for using your iPhone as a webcam during Zoom and other FaceTime calls. This mount is designed to work with a Viewsonic monitor and may work with a variety of other monitors. This…
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
Praktischer immer dabei Smartphonehalter für den Schlüsselbund. Sehr klein und Handlich, bleibt auch nicht überrall hängen. Always handy smartphone holder for your keychain. Very small and handy, and won't get caught on things.
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
The first design (dummy) was created by Paperpilot and was discussed here . I have remixed the design from Warc , adapted it and made it ready to print. Thank you for the work. I moved a few things around until it fit for me. From that I…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
I was looking for a smartphone stand with the option to charge the smartphone while in the stand. Since I couldn't find one, I designed my own stand. The current stand is actually the 5th revised version. This version has a hole on the…
Wydruk około 3,42 €–4,19 € nettoWstępna wycena jednego wariantu
![Cable Repair and Protect for iPhone and Samsung [lightning+usbc]](https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/195cfe9b-40fc-4570-b695-c540798fc979.jpeg)
![Desk Headphones Hook [Easy to Print] [Multiple Variants] / Clamp / Holder / Hanger](https://media.printables.com/media/prints/664262/images/5232779_79e6456f-825b-420c-b549-25ccaeddc536_e9b42033-6509-4546-87ec-a2d2b3b002b1/dsc_3556.jpg)
![Vertical Headphones Hanger / Clamp [Kallax] [Easy to Print] [Multiple Variants] / Holder / Hook](https://media.printables.com/media/prints/663848/images/9073575_3e0a47ae-93d3-4674-baa9-523682eaa44c_2ecbe634-d193-4580-af2c-590abfc9a03b/headphone-clamp-v23-32-ext.png)
