211 modeli
Summary This is my version of the modular hydroponics tower. It was inspired by the modular tower here . It has several key upgrades. More Stable: This tower has a wider base attaching it to the nutrient reservoir making it much more…
Wydruk około 0,50 €–0,62 € nettoWstępna wycena jednego wariantu
Ever want to get into hydroponics (growing plants in water), but only had a bunch of mason jars? Well, if so, here's a solution for you. Get your own hydroponics garden in under half an hour! Assembly/Usage: Replace inner portion of mason…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
I've been printing the parts for Conr8r's excellent Hydroponics system (https://www.printables.com/model/63055-upgraded-modular-hydroponics-tower-more-compact-st) and wanted a robust Jiffy pot. The version included on the Thingiverse…
Wydruk około 2,48 €–3,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I like to grow Chillies and and i lack outside space to grow more so i stumbled upon a video on youtube that inspired me to try hydroponics. after i watched that video i modeled something similar to what is shown in fusion 360 and tried…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
Semi Hydroponics - Netcup 4.5" NO SUPPORT for hydroponics
Wydruk około 3,44 €–4,20 € nettoWstępna wycena jednego wariantu
ver. 1.0 the arrangement of the internal air flow and the associated greater weight load to prevent floating you need: layer 0.2mm nozzle 0.4mm support under intake pin 100% infil
Wydruk około 6,72 €–8,21 € nettoWstępna wycena jednego wariantu
A drip lid for 6" pots to allow for the water supply to reach a larger range of the growing medium. Takes a 4mm inner diameter tube, inlet is 5mm to allow for a bit of stretch. I was asked to print…
Wydruk około 2,18 €–2,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Recycling the tins from your canned tomatoes to grow new tomatoes is a great way to reduce your impact on the environment and let's not kid ourselves: Homegrown always tastes better. This print-in-place lid for the standard sized food…
Wydruk około 2,86 €–3,50 € nettoWstępna wycena jednego wariantu
Do you also love hydroponics, but you drown in substrate? Here is the solution for you! Indoor hydroponics without substrate. This gives the plant even more room to grow and you have to worry less about vacuuming the pellets that fell…
Wydruk około 5,85 €–7,15 € nettoWstępna wycena jednego wariantu
These parts are designed to use a few solid layers on the bottom and then a continuous and unbroken profile all the way up the part. Prusa and Slic3r call this vase mode, while Cura calls it spiralize. I watch Hoocho on Youtube and they…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
The original print was for wide mouth jars, this remix is for regular mouth (2 ³⁄8″ for the inner diameter and 2¾” for the outer diameter), print diameter is 67mm. Pod holds seed starting medium (coconut fiber, perlite or vermiculite).…
Wydruk około 2,08 €–2,54 € nettoWstępna wycena jednego wariantu
That is a perfect little box to let the Strawberry Runner grow some roots and easly plant them afterwards. it is a remix from Nigel Johnson and i fixed the screws holes for v3 and also added a dirt version, as i needed that.
Wydruk około 1,57 €–1,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
2inch Net cup for Hydroponics systems, non-stackable, print as needed. RECOMMEND PRINTING WITH PAINT ON SUPPORTS FOR LIP ONLY For use with Rockwool, not tested with clay.
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
The first picture shows how it might look and the second one how it looks right now. For this vertical garden you will need a 110 mm PVC tube, 73 mm hole saw and some base. Just cut the 73 mm holes in the tube in a pattern of your liking,…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original print was for wide mouth jars, this remix is for regular mouth (2 ³⁄8″ for the inner diameter and 2¾” for the outer diameter), print diameter is 67mm. The original was a 2 piece print, this re-mix is one piece. The original…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena jednego wariantu
As I am used to eat spread in the morning, I have a lot of empty jars. For this year's valentine day I have turned one into a hydroponics pot. Through the heart you can see how much water is inside. Before starting to print be sure to…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fits the 3DPonics Planter Cup . Version 0.3.0
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My original Kratky model used canning lids that are made of metal. After a few uses they tend to rust. Luckily I found a regular mouth jar lid here on printables and modified it to add the rockwool cube holder.
Wydruk około 2,18 €–2,66 € nettoWstępna wycena jednego wariantu
Intro This is a modified version of boundarycondition's Modular Hydroponic Tower Garden and some features of ghoofman's Smart IoT Modular Hydroponic Tower Garden . I finally decided to upload my remix of boundarycondition's Modular…
This modular hydroponics tower lets you grow a large amount of plants without the need of lots of room. Each module fits 3 50mm (2 inch) pots and has the water tube running up the middle. Just stack as many modules as you require. Each…
I made this Airstone. It works by altering small arcs, thus creating little holes. I used some 2 cent coins to weigh it down enough so it will sink to the bottom. However, you may get away with printing it at 100 % infill, as both PLA and…
At first many thanks to Conr8r for the Upgraded Modular Hydroponics Tower . I made some addons so you can build your own tower with even more flexability. These parts are compatible with his design. I designed additional shelfs with one…
The pod caps cover unused slots on the Gardyn column to help prevent foreign object intrusion like dust and debris. The pod gets removed before placing cover to avoid water sitting the cup of the pod.
Let's say that we want to have a 3-layered hydroponic tower. Then we will need: 3x TowerMiddle ( it's in the printable files ) 3x WaterGive 15x Pot ( there are 3 layers, 5 pots per section ==> 3*5=15 ) 1x Top PRINT IN VASE MODE (in all…
Intro This is my remix of boundarycondition's Modular Hydroponic Tower Garden and some features of ghoofman's Smart IoT Modular Hydroponic Tower Garden . I initially posted this project in Thingiverse (…
This is a model I came up with which is simpler than most of the other options our there. The segments are infinitely stackable. The base has 3x .25" mounting points. The lid has a ½" spigot for a flexible tube to be hooked up to along…
Description Experimental vertical hydroponics system I have designed for growing Herbs indoors. Things you will need for the assembly: M5x40 button head cap screws (x18) M5 nuts (x18) M8 threaded bar (730mm minimum) M8 nuts (x8) M8…
This is a collection of pieces I printed for the bottom module section of the hydroponic tower, plus a mounting adapter (2 parts), a filling/inspection cap and a cap for passing through the electrical cord for the pump. All the parts have…
I remixed the modular tower from https://www.thingiverse.com/thing:3405964 and combined it with the improved locking ring from https://www.thingiverse.com/thing:4965368/files. For the lid to the 5 gallon Lowes bucket, I used…
I needed a 4x3" downspout endcap for a hydroponic project. I modeled this for a vinyl downspout I picked up from Lowes. There is ~1mm clearance for silicone caulking to make it water tight. Need a water level indicator for your new…
This rack holds up to 6 net cups, net pots, basket cups or whatever you want to call it. It is designed to be a simple solution to keep the rock wool of hydroponic plants wet during the germination phase. After that you should put the…
This Remix Requires the use of Bucket_Lid_Mount-2.stl from https://www.printables.com/model/232109-upgraded-modular-hydroponics-tower-addons This has been specifically been designed around a blue Lowes 5-Gallon Bucket, others may work but…
This a plant support for the 4-way module originally designed by boundaryconditions https://www.thingiverse.com/thing:3405964 And it also fits with its spiritual successor by Luitzor https://www.thingiverse.com/thing:5712775 Prints Flat…
Rota ting Hydro ponics Tow er. Pr int pa rts wi th in ner wa lls wi th 12 0% fl ow I us ed a . 8 noz zle and t wo wa lls I n or der to ma ke the to wer rot ate y ou wi ll ne ed a swi vel ada pter on yo ur wa ter ho se. G o to yo ur lo cal…
Hydroponics pot. Lower part is for water and nutrienst. You can use small waterpump to pump water and nutrienst to the plant. I have used BOYU FP-100 water pump. Plant is planted to rockwool and clay granulas. There is float for…
Great for making shrimp hide from plant roots or rooting plants (aquarium water is a great growth booster).
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Hydroponics grow baskets. There are 2 types to choice from.…
After a month of growth update V2 -realized that wall are too thin and Sun gets to roots. Walls thickened by 22%, recommend to print with 5 loops for essentially 100% infill. For V1, using black spray paint to do two coats of inside fixes…
I was inspired to make this 3d model by this video by Dr. Kratky . Designed to be used in a 3" deep gutter/downspout system. *this is just a little test section for a larger row, it was a coincidence I printed an endcap in translucent…
Hydroponic Net cup/pot System for 4" PVC Pipe Start your plants off first in the smaller net cups in a cloner/nursery. Once you are ready to move your plants to your 4" PVC pipe hydroponics system, you simply use the cap + grommet pieces…
Hydroponik System - Deutsch (in English below) Das System ist so ausgelegt das der Deckel die ersten Pflanzen mit Wasser versorgt und dann einen kleinen Vorrat befüllt. Wenn dieser voll ist läuft dieser über und benetzt die…
customizable net pot for hydroponics. I made those pots for my hydroponic setup wich is a recirculating DWC inside PVC pipes. The commercial sizes of 2" pots are too deep for my 100mm pipes, so I made a custom one with a lower height. in…
Threads can be tricky, just slow down a lot (5mm/sec) on inside overhangs and print a few degrees hot. A few loose strands won't hurt anything, just trim them with nippers and keep going,
For 4inch PVC pipe inside diameter, 4.5 inch outside diameter. New design: https://www.thingiverse.com/thing:2474497 Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: No Supports: Yes Resolution: 0.2 Category: Outdoor &…
Experimenting with two nozzle types for the hydro tower, the goal was to reduce the flow strength by mimicking a mist nozzle while retaining saturation. The pressure is not enough for it to fully mist with most pumps you would use in this…
A basic two basket hydroponics set up Category: Outdoor & Garden
This is a great part I designed because I couldn't find any good ones available online. I used it on my project you can take a look at here https://imgur.com/gallery/2mQM6Cb Though very useful I accidentally deleted the design from my…
Designed to work with the Upgraded Modular Hydroponics Tower by Conr8r . This securely bolts the bottom of the hydroponics tower to a 3 or 5 gallon bucket lid. I have included my original ~220mm diameter design as well as one that should…
Grow your own food or plants with a hydroponic growtower ! Since there are many models for hydroponic towers using a big old plastic container, i thought it would be nice to have something a little bit more aesthetic. So i desgined this…
Original model reuploaded from Thingiverse under Creative Commons Attribution-ShareAlike 4.0 (CC BY-SA 4.0) license. All credit goes to the original author, keep_on-growin . Check out their Youtube channel - it's a fantastic source of…
Hex pattern net cup for NFT hydroponics system. Designed for use with 2 in x 3 in downspout DIY hyroponics NFT system (see pictures) and 1.5in holes. The net cups fit into 1.5in holes and are 2 in deep. The inside dimensions fit rockwool…
50mm diameter, 50mm tall net pot for hydroponics
Need to start your garden from seed indoors or provide lighting for your DIY hydroponics? This modular LED light strip system can be customized for your growing needs. Print file includes: 24cm LED strip (8mm) holders with end adapter,…
I'm building https://www.printables.com/model/63055-upgraded-modular-hydroponics-tower-more-compact-st and I needed something to start my seedlings so I designed this really simple box to start seedlings. To make transplanting easier, I…
This is a blackout sleeve and cover for 32oz mason jars, for use with Kratky hydroponics. The sleeve blocks light to prevent algea growth. The sleeve fits loosely so the plant can be lifted out to check nutrient levels easily. The cover…
This is a simple model I put together for holding 15 Aerogarden pods on the smallest IKEA Trofast storage box. It fits the Trofast storage box found here: https://www.ikea.com/us/en/p/trofast-storage-box-white-70091412/ No supports and 5%…
I made a simple collar to turn any used 50mL centrifuge tubes into a static hydroponic module. I have also designed tray lids for internationally standardized NSF Hotel Pans to allow 9 and 33 slots for hydroponic growth. This is an…
Поддон гидропоника с автополивом с возможностью горячей замены бутылки без выкручивания и переворачивания горшка Возможность регулировки уровня. Внимание подходят не все бутылки большие а только плотные (из под минералки) - их НЕ должно…
This design includes net pots for a DIY hydroponics system based on Utz RAKO container boxes. Size of the STL: Top diameter 60mm, bottom diameter 40mm, height 40mm. To use these with a Utz RAKO box, simply drill 60mm holes into the top…
This is a simple net cup lid support to stop a net cup from slipping through the lid of a plastic bucket or tote. The three holes are designed to fit wooden skewers to form a tripod shape and support the main stem. Works great for peppers…
I originally added the LED arms and lights to my 5 gallon bucket with lid from here but they were really floppy. So I mixed the LED holder with the half spacer with no turn that I remixed from here. To get the lights far enough away from…
Updates 10/8/23 - WORK IN PROGRESS and I intend to publish some updates in the coming months. Current models are absolutely functional, and I am using them to grow greens today. Just wanted to make some changes to fit better in my…
Printed at a .2mm layer height with TPU. Measure 35.3mm x 35.3mm x 4mm
Ring support for larger or hanging plants. It fits on the modular hydroponics tower system . Please note, this was printed on a large printer, 36x36cm. Lowered the original Module_Spacer_40mm to save materials.
Tend to your Gardyn hydroponics plants without spilling water all over the place. This ySleeve will hold your yPod while it is out of the system for harvesting or plant maintenance. It has cutouts on the sides to make it easy to remove…
This is my first attempt at a modular hydroponics. Made the sections so that you can connect them in a modular fashion. Printed using PETG: - 4 top and bottom layers, 4 perimeter layers - 25% infill Baskets:…
EDIT: Added Trellis for my cherry tomatoes. Using bamboo skewers (4mm dia). I tried using the mini hydroponics tower from turboprint3D and I had a few issues that I addressed in my own take on the idea using his parts as reference. The…
I hated the look of the PVC pipe and fittings on my model so I remade the base. With this model you would just need to cut out a circle in the lid to insert this piece into your bucket of choice. Obviously this isn't as stable as the PVC…
This model is entirely modular, so all parts fit together seamlessly. Other hardware (water pump, timer, 3/8" tubing, and a pond (I used a bucket, but if you want fish, maybe look into a larger pond)) is not included, so some additional…
We often use our aerogarden to start seeds, and then transplant them into our larger tower garden to actually grow. The adaptapod by Fryd3r is a great printed system for the aerogarden. Aerogarden Adaptapod by Fryd3r and our large tower…
This requires less material (but is still strong). The added notches at the top so that one can add a distributor disc to better focus how the water hits the plants below. (Uploaded model was a test article, I haven't yet fully explored…
After printing the tower base I noticed the bucket lid wasn't very thick and flexed a lot. So I designed this support ring to mount on the under side of the lid to help support the tower. It doesn't remove all the flex but it helps a lot.
There's a lot of variations on this out there, but here's mine. It turns the water back down instead of coming through the air holes.
Pliers for easy making holes to the pots for semi hydroponics. Helps prevent crack of the pot during drilling. Tweezers are for deeper flower pots. Video tutorial: Model is made in Onshape:…
Mit diesem Set machst du aus einem kleinen Mini-Gewächshaus (Amazon) mit den Innenmaßen 165mm x 125mm ein Hydro-Anzuchstsystem. Als Anzucht-Substrat verwenden wir für die kleinen Pods herkömmliche Watte. Darum die konische Form der Pods.…
Modular Hydroponics Tower for Euro Boxes Model 1, as of June 18, 2024 Before you read this… Please note, that this tower model was designed for stability, optimum flow and easy handling. If you are looking for something that is fast to…
Print and place inside a large mouth mason jar and tighten the lid.
I made it into two pieces so that you can easily drain a tray from water without having to remove everything
Original model reuploaded from Thingiverse under Creative Commons Attribution-ShareAlike 4.0 (CC BY-SA 4.0) license. All credit goes to the original author, keep_on-growin . Check out their Youtube channel - it's a fantastic source of…
56 plants in less than 2 sq metres. DIY hydroponics NFT (nutrient film technique) Print Settings Printer: Cr10 modified Resolution: 0.25 Infill: 25% Filament: eSun PLA+ Black Notes: Frame 150x25mm treated pine 90mm down pipe Pipe holders…
This hydroponics tower growing clip snaps easily onto most tower tubes, giving your plants a stable support point as they grow. It prints without supports, installs in seconds, and helps preventing bending or breakage. Perfect for leafy…
This is a hydroponic net cup that I designed for my first trials with growing lettuce using the Kratky method. It should fit holes between 52mm and 62mm and can be printed without support. I printed it with some old PETG, but any material…
Insert for SPIDER FARMER Hydroponics Growing System. Print 2 Use higher % infill to reduce light.
hydroponics nft net cup for 28mm hole in a pushfit 40mm pipe The push fit pipes are actually 41.9mm but sold as 40mm so adjust using scale if diffrent pipe size. This will allow you to block out all light, I use 1 cotton wool ball in each…
I wanted a 4 way planting module with the water diffuser, but the model wasn't in the original files, so I just split and merged two modules. Enjoy
This is meant to easily attach a ¾ inch PVC pipe as a feeder line for Hydroponic Dutch Bucket System that use a 5 gallon bucket with a lid. How to use: Drill a 7/8 inch hole in the top of the bucket lid. Place Clamp Support in hole Drill…
i found the file for the dispensor with holes. Happy growing!
2 inch netcups for hydroponics 3 versions Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament: matterHackers.com PLA Black Notes: 2 inch netcups for hydroponics 3…
These end caps silicone onto vinyl fence posts sleeves to turn them into NFT gutters.
This germination setup consists of a reservoir which can hold water or a hydroponic nutrient solution, and six connected containers which hold the growing medium in which seeds can be germinated. I designed this model to conveniently…
Pot for water testing for Modular Hydroponics Tower from Thingiverse (5712775) . Thanks and regards to Luitzor for creating the tower. The pot can be printed multi-material or single material. How it works: Place the pot in the tower…
Lid with a integrated netcup for use with Trader Joe's Apple Cider bottles (or other 40mm lid, twin threaded containers) Category: Outdoor & Garden
This cover was made in attempt to reduce algae and other buildup around the plant and keep the system cleaner. The cap should just sit nicely over the cup with plant growing in the middle. Print instructions Category: Outdoor & Garden…
A complete description, assembly instructions, and expected outcomes can be found here: https://www.protocols.io/view/dzakovich-lab-3d-printed-hydroponics-system-setup-e6nvw4pw9lmk/v2 This system is the Single Tower companion of the…
hydroponics nft net cup for 51mm hole blocking light 5 Diffrent insert shapes, 25mm x 25mm Rockwool cube 20mm rockwool plug 20x20mm cube/cottenwool ball 41mm Jiffy pellet Normal - No shape just a netcup depth of 50mm but scale back if you…
A tiny funnel that is printed in Vase mode, without top or bottom. In Cura, it's enough to set Surface Mode to ‘Surface’. In other slicers you might have to manually set top and bottom to zero. I printed with 0.6mm wide lines; wider lines…
This is my ebb and flow (flood and drain) hydroponics system project made with Ikea Trofast boxes. You have to print inlet and inlet holder, drainage and drainage holder, two nuts and two corners. Corners are used to make an angle and…
Cap for Spider Farmer Garden pod. Cover unused pods.
These fit 2" net cups. I needed the option to start just one or two cups at a time but didn't want to leave spots empty in the four cup version. Printing one of these two variations will use less water than the four cup version when you…
I cut the original printable net cups in half to use as an adapter for my storebought net cup. this way the net cups or stuck more securely and I can use the adapter for color-coding. Print Settings Printer Brand: Creality Printer: Ender…
