463 modeli
Screwless Snap Assembly. Start with base or bottom case, remove ssd and drop Pi4b board into bottom case so that it rests in provided IO openings correctly. Fit should keep board in place even with a little shake. Place…
Wydruk około 0,45 €–0,54 € nettoWstępna wycena jednego wariantu
I constructed this board to hold the above mentioned controller for development purposes. The part was printed with PLA with a layer of 0.3 mm. Any other filament works too. No rocket science. Step file included. F360-file on request. The…
Wydruk około 6,49 €–7,93 € nettoWstępna wycena jednego wariantu
Prusament Galaxy Black. PETG 0.20. 15% Infill: (Gyroid). Nozzle 250c. Bed 90c. Support : None.
Wydruk około 4,39 €–5,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a Raspberry Pi4 enclosure in the classical Apple Macintosh SE style. In addition to Pi4, the following components are selected & installed: Waveshare 4inch square LCD ( https://www.waveshare.com/4inch-dpi-lcd-c.htm ). Geekworm…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
Hallo Freunde der Audiotechnik, anbei gibt es STLs und G-Codes für einen Focusrite 4i4 (3rd Gen) 9,5Zoll Rack Halter. Ihr braucht für ein komplettes Set folgende Teile: 2mal Rackmount 2mal Stabilisierer Top 2mal Stabilisierer Down…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Included are STEP file for your CAD tool, or directly the Fusion files. If you like the model as it is, the STL model files and the Slicer files. As a hint i uploaded also the print code made for a MK4. The board frame is hold by magnets…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Filament : Devil Design. Green Transparent. PETG 0.20mm. 20% Infill: Honeycomb. Nozzle 230c. Bed 70c. Support : None.
Wydruk około 4,48 €–5,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an modification of the original RPi4 UPS case by Jason with changes and upgrades for the newer revision of the GeeekPi RPi UPS hat (aka EP-0136) for Raspberry Pi 4 . UPS Link: https://wiki.52pi.com/index.php?title=EP-0136…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
I had gotten my hands on an 8gig RPi4 model and decided to give it a go for a portable game station. Despite having many cases online, none fits the Waveshare 7inch screen I had so gone back to the drawing board with this. Parts:…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An adapter for NITECORE Intellicharger i4 to fits AAA batteries comfortably and stable during charging. Made in Autodesk Fusion 360.
Wydruk około 1,48 €–1,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
J'avais besoin de fixer le boitier de ma Raspberry Pi4 dans la Prusa Enclosure. C'est un boitier de chez Labists qui a un insert de vis M6. J'avais déjà installé une rotule dans l'Enclosure : merci à InnesPort…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This case is ONLY for raspberry versions with tower and NOT interlocking so don't print it if you don't have a tower because the holes and alignments are custom made. That said for those who want to print it get in addition to the files…
Wydruk około 2,25 €–2,74 € nettoWstępna wycena jednego wariantu
To be use with https://www.printables.com/fr/model/668314-rackrpi-frame-2u and https://www.printables.com/fr/model/4074-malolos-screw-less-snap-fit-raspberry-pi-4-model-b/comments/1264962
Wydruk około 0,67 €–0,82 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a custom insert for the tami4 edge water dispenser. You can even use the step file for the blank and create your own pattern! I printed this with pla, 0.20mm layer height.
Wydruk około 1,74 €–2,13 € nettoWstępna wycena jednego wariantu
Screwless Snap Assembly. Start with base or bottom case, remove ssd and drop Pi4b board into bottom case so that it rests in provided IO openings correctly. Fit should keep board in place even with a little shake. Place Screwless Jack…
Flat version of the Domed Cover...SnapAssy. Please NOTE! Remove the MicroSD Card before assembly and disassembly! You will need... Noctua 40x40x10 MM Fan 5V 2 Dupont female single pins to connect to 5V or 3.3V and Ground GPIO pins. You…
LCD panel that works with the awesome Hyperpixel 4" touchscreen with Raspberry Pi4. This is for: MK3/MK3S/MK3S+ and Pi4 Yet another remix of the 4” HyperPixel cover for the Prusa MK3S+ for the Pi4 to be used with Octoprint and Octodash.…
My first remix design for a 3D print! I added the hooks to the case such that it can be screwless mounted to the horizontal profiles at the bottom of the prusa MK3s printer. RPi4B case:…
Put a Raspberry Pi4B on your Prusa Mk3S and have it align perfectly with the frame. Smallest form factor possible for a Pi4. Space for an optional Pimoroni Fan Shim. All peripheral ports accessible (not the Pi headers). Break away window…
This case is designed to hold a Pi-4 and a standard 2.5” SATA SSD. Sometimes it’s useful to be able to boot your Pi from a SSD rather than an SD card. I’ve previously created a headless version that allows for the PoE+ Hat. The Pi and SSD…
This is a remix of the original PI4B Adapter case from Bigtreetech. Changes: Chamfer near the DSI port exit to avoid supports. Holes where to screw the CB1 and heatsink, both with M2.5 nuts or screw on plastic. Bigtreetech logo/name…
Happy 10th anniversary to the Raspberry Pi! Description This is the Case for the Raspberry Pi 4 B. There are 2 types of top covers. Slot-in I/O cover type. Cut-out I/O cover type. There are 3 types of bases parts. with tabs (for wall…
I designed this box to integrate the Einsy rambo and be able to deport the Raspberry 3B+or 4B and improve the cooling of the whole The box has many advantages: Compatible with my bear feet…
This is a nice little desk stand for the receiver. It includes a baffle to reflect the sound from the rear speak forward and a resonating chamber that slightly amplifies it. The TPU foot is optional and should be printed in TPU 95a. It…
A Raspberry Pi4B case that attaches to the rails so you can mount it behind the LCD.
With this bottom of the case you have the possibility to screw your Raspberry Pi 4 to a wall with M3 countersunk screws. I‘ve included the Pimoroni Fanshim top for RPI4 as that is what I‘m using on my enclosure. The case bottom is…
My target was to create a box covering all wires arround a 7 inch touch screen, a raspberry PI4, and 3 switchs. Only one cable is reaching the box with an USB connection to the printer, a power input for the PI, and some switchs lines. A…
Just my design of a raspberry pi4 case. Super Simple. With the possibility to screw the housing to a surface. Pay attention ! The bolts you need are M2.5 x 16. Link:…
Support à fixer sous un bureau ou un plan de travail pour la carte son Focusrite Scarlett 2i4 2nd Gen et 2i2 2nd Gen Je voulais un support qui me permette de sortir la carte de son logement en cas de besoin. Attention, les languettes sont…
A case made for mounting your Raspberry Pi4 to your Prusa i3 MK3. Smallest form factor possible for a Pi4. All peripheral ports accessible (not the Pi headers). Break away window for Pi-cam. Windows for status lights. Easy to print: no…
requires smoothing the cylinder walls and everything else that does not fit together
This is a simple enclosure for the BigTreeTech PiTFT50 V2.0 screen assembly with a Raspberry Pi 4B mounted inside. The BTT mounts into the case with holes for the screw bosses and is secured from the back side with small metric screws…
intégration octoprint pour raspberry dans le tiroir de la ender 3S1
a cool i think working engine have not tested it out it is a beta/ prototype
This is a remix from the project https://www.prusaprinters.org/prints/39449. The goal was to mount an Raspberry Pi 4 directly on the frame of the Prusa i3 MK3S+ a look alike. As per previous made version the case is small and as compact…
A simple bracket to hold a 4i4 Audio Interface to the bottom of a desk. Has recessed 3mm holes for a variety of screws.
This is a remix of the LCD Covers for Raspberry PI4 w/ Hyperpixel display. After reading some reviews about the existing ones being too tight and possibly cracking the display, I designed this one so that RPI w/ Hyperpixel simply slips in…
This case is designed around the following: Freenove FKN0078 7" Touchscreen Raspberry Pi 4 Model B Geekworm P165-B 11mm heatsink for the Raspberry Pi 4 Model B Assembly requires the following hardware 4x M2.5 x 15mm screws 4x M2.5 x 10mm…
Designed up this dealer button to use in home games or have just as something laying around for any poker fan. It was inspired by a dealer button in Pokerstars VR. Printing: Ring - Infil to add weight, supports needed for spade inset.…
This is a redesigned case based on Malolo's RPi4 Case. This was designed to fit the Raspberry PI 4 Model B with a Noctura 5V 40mm fan.
Remix of Joe's Pi Case design to fit a Raspberry Pi 4B. You can customize the design with the included files (.step and .f3d) Print instructions Best to print the parts separat. If you download the stl you need to flip Top.stl. If you are…
Adapter for cleaning a IRobot Roomba Serie ei e5 e6 i3 i4 i6 i8 i7 i7+ J7 J7+ with Dyson V7 V8 V10 V10 V11. Simple, no support, without snap mechanism.
Imported from Thingiverse. A couple of different cases for the Raspberry Pi 4. Low and tall version for Ø30 and Ø40 mm Noctua fans. Not sure about other brands, but should work for a couple of other ones. One version made to fit the 30x30…
I couldn't find a case for my Raspberry Pi 4 with PiJuice HAT and Waveshare PoE HAT installed so I made one myself. I use it for HomeAssistant but there is nothing HA specific so it can be used for anything else. FreeCAD source code is…
Maturity Very Good 12 prototypes. In use since 2023/10. Model design from scratch. Hardware Hat spacers are 11mm height (as Adafruit quotes Nigel Tufnel's “These go to eleven”). The part “PiAndHatCase-rxx - Entretroise” is if you missing…
Under-table mount for Focusrite 2i4 2nd gen audio interface This is a remix of the 2i4 bracket by DJERO . The design has been modified to be printable on the side, and require no supports. Printing on the side should also make the tabs…
This is an old version, the new one can be found here . A simple case for a pi4 Uses 8 M2.5x7 screws Includes STL and STEP files
I tried out many cases, but somehow my requirements were never met: Silent Case for the Raspberry PI4 and BigTreeTech SKR V1.3 , V1.4 or V1.4 Turbo Be able to Add / Remove electronics quick and easy, while the case can be in place. Small…
This Case was created by/for BiblioTech Sans Frontieres, consider supporting them please. https://www.librarieswithoutborders.org/ New Version June 2024 larger, better cooling, better fit, easier assembly, etc This case is for the…
Pimped my Raspi with a 1TB NVMe Disk and a strong cooler. As I couldn't find a suitable case I made one - after some iterations it's good enough for my purposes, maybe also for someone else. I also attached the Freecad File.
The problem I had is that the supports didn't allow for a surface finish that I liked. This Model has integral supports, that need to be popped off when the print is done. Before assembly. I optimized the design for printing in a specific…
Update: Febuary 10th 2022, added a setting to print the original case and stl without the Raspberry Pi cut-out. Because of power issues when using power from the MK3 board, I have changed to an external case hooked to the frame just below…
This case is designed to hold a Pi-4 with PoE+ Hat as well as a standard 2.5” SATA SSD. Sometimes it’s useful to be able to boot your Pi from a SSD rather than an SD card. Attach the PoE+ Hat to the Pi-4 using the provided screws and…
Remix of Nutcrapper's i4 Gopro mount. I redesigned this mount to be printed with the rear side of the mount on the print bed, there are also other minor changes. I found the original design to break easily along the 'neck' when the GoPro…
Easy to assemble box for 4x SSD and Rpi4B. It can serve as a home NAS server. Passive cooling.
This is a work in progress, but hosting the portion i've done so far. I've made the base structure have quite thin structural pieces so you should hopefully not use infill but just perimiters which will make the print speed much faster.…
Simple ventilated case. I use without radiators, with a fan for blowing inside, connected to 3.3v (not to 5 volts) - this is enough to cool and it is very quiet. In a room of 26 degrees C, the pi sensor shows 38-40 degrees C. Required:…
Squirrelbrain Pi 4 Case Extrusion Mount modified to fit Bigtreetech CB1/CM4 This will also still fit the Pi 4. Additional Changes: Opened sd card slot Added hole for antenna Widened a few screw holes for better clearance Made clearance…
case for 7 inch 1024x600 IPS touchscreen and raspberry pi 4. case uses m2 screws to hold everything together.
Supports used under the overhang on the bottom of the stand.
First of all I want to thank @ Nelovy_08 for the model he provided. I remixed the model since I needed a bracket to hold a shelly plus 1 PM - 2 PM, also gen3, dimmer, i4 (and other shellys with the same shape) with the “plus Add-On”. The…
This has all of the changes from my previous remix of this case, but with the addition of the thicker bottom and the hole pattern for Voron DIN clips. It has built-in supports, so you shouldn't need to add any. If you are using…
All the parts you need for the Prusa MK4 and Raspberry Pi Camera Module Version 3. As with the original, the bracket (the piece holding the arm to one of the Z-mounts) requires one M3 x 16 mm cap screw. The Raspberry Pi 4 mount I chose…
Cover modified to Fit HexCase Cover added clearance to IceTower by .5mm per side Base modified to match HexCase Snaps (interchangable) Collabortive Project with WeakNerve ( https://www.prusaprinters.org/social/9859-weaknerve/ ) Concept…
What: This is a foldable and customizable Raspberry Pi 4 case. Using 3MF file directly in PrusaSlicer, you can decide which of the listed below, optional features you want to keep. Why: Somehow I couldn't find a case I'd like, so I…
Raspberry Pi4 Slim Case with 30mm fan mount and 2020 extrusion mount. Materials: 4x (m2.5x10) Fan Mount 2x (m3x8) 2020 Extrusion Mount 4x (m2.5x12) Slim Case The Fan grill has a modifier so that you can change the infill pattern to match…
HexCase2 is a Pi 4B case that fits the POE Hat from Raspberry and many other Hat boards… This case will need a new Case Bracket in order to mount onto the Prusa Mk3 frame. The Stand keeps the Pi4b PCB in place from the fit/force of the…
Cubert is my case for the popular ATS Mini SI4732 Pocket Radio. This inexpensive radio supports many bands and is high regarded in the radio community. More information on the radio itself can be found in links at the bottom of this…
Remixed from WDR's model with the following changes: M2.5 screws to mount the Pi in the case so as to not have to enlarge the holes in the Pi. Removed extra space for the Pimoroni Fam Shim Made a version with the Pi-cam breakaway already…
Bracket is designed to be used with 33mm DIN rail clips and mounting on DIN rail. Can fit other mounting styles as well. Print settings These are the recommended settings. Layer height: 0.2mm Extrusion width: 0.4mm, forced Infill…
Raspberry Pi4 Hyperpixel Case (rectangular). Added vents to the side which is not obscured by the B2B connector. Based off the model by woodle.
A mix of a raspberry pi aluminum case with a RPI HQ camera enclosure. I wanted to re-use the back part of the aluminum case for a better cooling effect and added the HQ camera on the front. During the development of my web application for…
I modify the original case to adapt it to a raspberrypi 4, and ad four threaded inserts to close the box.
So I can't help noticing someone hasn't already made a 3D printed version of DHS suspension for MS chassis….I mean people been doing these mods for over 20 years, but mostly Tamiya spec mods that are both time and money consuming to make.…
Stand for the SI4732 Mini with amplification tunnel
Print 2 identical parts, use different screw holes for front and back bracket
Dopo aver analizzato le varie soluzioni trovate, ho deciso di progettare un box, per la scheda Einsy e il Raspberry Pi4, di mia iniziativa. Questo non è un remix ma un mio progetto. Ho cercato di includere ciò che serve alla stampante,…
gedruckt ohne Stützstruktur in PLA mit 0.2mm
This case is designed to hold a Pi-4 with PoE+ Hat and a standard 2.5” SATA SSD. Sometimes it’s useful to be able to boot your Pi from a SSD rather than an SD card. I’ve previously created a headless version but this one exposes the HDMI…
Multifunctional Adapter Case for Raspberry Pi5 (& Pi4B Updated)(& Pi4B Updated) **** UPDATE 09OCT25 **** As requested I have Added the file "Multi Pi4B Case v46" which suits the Pi4B Eth and USB connector arrangements.…
Einsy Board + RaspberryPi 4 + DC-DC Stepdown, original case modification/remix, use original access door. Eisny-base.stl modification to allow for mounting rPi4 + dc-dc step-down converter while maintaining the original design look and…
El diseño es un case compacto y funcional que alberga tanto una Raspberry Pi 4 como una placa BTT SKR E3 Mini V3, con espacio adicional para ventiladores para mantener una adecuada refrigeración. El case está diseñado como print-to-place…
Case for Pi4 and Hyperpixel4
Diseñe esta visera para ampliar la protección que ofrecen las mascaras de paintball/airsoft de tipo Dye i4 o su clon FMA F1, ya que suelen dejar la frente descubierta. Son modelos muy básicos ya que no tengo conocimientos de diseño y los…
I printed mine with Ender 3, 0.8mm nozzle, PETG Fusion model has inside dimensions as parameters so it can be easily modified. Rubber pad holes are not parametric though.
Remix of a remix here. First, I ran the bottom through netfabb which resolved a lot of errors. Second, I remixed the top to significantly short the screw pole closest to the GPIO pins. This allows one to use a Pimoroni Fanshim inside the…
Replacement cupholder divider for Hyundai I40 (2016) with parking pass slot unsure if this will work with other Hyndai I series cars Designed to have a snug fit, recommending printing in PETG or ASA/ABS to avoid deformation
This is a remix of https://www.prusaprinters.org/prints/69731-hyperpixel-4-touchscreen-lcd-raspberry-pi4-for-oct It just lacks the power button opening. See the original for all the files (Pi enclosure, brackets, …)
921973Z520 hyundai i40 headlight mounting
Printer settings: Filament: PETG Layer: 0.2-0.25mm Infill: NA Walls: 2 walls, 3 bottom Supports/rafts: not required [optional] fuzzy skin for 0.4 nozzle: contour, skin point distance 0.8mm, thikness 0.3mm I made a variation with a fuzzy…
Update 2022.10.11: Working on another screen frame to use one of these hdmi panel mounts: https://smile.amazon.com/gp/product/B09D924KLN https://smile.amazon.com/gp/product/B093WD6NB7 -This should enable a lot more flexibility in the…
Ich habe es in PLA mit 5 Wandlinien und einem Infill von 25% gedruckt, da ich es etwas stabiler mag. Das Gehäuse wird von der Seite eingeschoben und durch das USB-C Kabel gegen das herausrutschen gesichert.
A I4 Channel based on the Underware project by Hand on Katie . Perfect to route in cables from the side when the multiword ist not mounted via screws but mounted with VHB tape.
I needed a mount for my printers screen ( https://www.waveshare.com/4inch-dpi-lcd-c.htm ), so I modified an existing 2020/3030 extrusion mount to suite my needs. Remixed From: Raspberry Pi3 2020/3030 Extrusion Mount (…
Perfect Octoprint addition with a Pi4 and Touch Screen LCD. I built a LACK table and first thought about having the PI4 and LCD as two separate components but then figured it would be nice to have everything compact and organized so I…
This version is intended to be used with: https://52pi.com/products/52pi-ultra-thin-ice-tower-cooler-cooling-fan-for-raspberry-pi-4-model-b-cpu-fan it was draw and corrected based on this version:…
Working I4 engine , engine block from @ericthepoolboy, pistons and crankshaft made by me. I made it actually work , can work with a electric motor. or any other motor that can be attached to the crankshaft. The model can also be used…
Zaribo Raspberry Pi Einsy Rambo Mount. Please see the blog post below for the assembly tutorial. Assembly Tutorial
The Pi4 doesn't fit tightly into the case-stand in this orientation. You might need to put a screw through that catches on one of the cases hexagons. The stand is attached to the frame via 2x M3 Screws and t-nuts (which can also be…
A mount designed for the compact aluminium RPI4B case by Geekworm. It is designed to use the entire case without having to sacrifice a part of it resulting in better cooling. 2.5x12 or 16 screws can be used to connect the mount to the…
