Z scale industrial 5 stories building
Was downscaled from N. The roof is an original design.
- Pobrania
- 368
- Polubienia
- 41
- Ocena
- 5
Liczymy pasujące modele…
Was downscaled from N. The roof is an original design.
25mm industrial bases, that fit my Miniature Painting Handle and Base Set Miniature Painting Handle and Base Set https://www.thingiverse.com/thing:6247736 Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes…
Best be printed in PLA to nail the overhangs from the tire studs. No support needed in this case.
Compliment your rugged PC build with textured fan side clips. I used silk PLA to give a metalic effect. I have included models for 120mm and 140mm fans. Printing I used 0.15mm layers for a clean texture. 0.20mm would look similar and save…
Intro I have originally setup a Bambu Studio project file that has everything laid out, however, if you're not using Bambu Studio or it's printers, please refer to this image for layout, printing orientation, number of parts needed, etc.…
Intro I have originally setup a Bambu Studio project file that has everything laid out, however, if you're not using Bambu Studio or it's printers, please refer to this image for layout, printing orientation, number of parts needed, etc.…
A simple yet super useful little bracket with a lot of strength. Works perfectly for reinforcing corner joints in wooden structures such as shelving units, boxes, and whatever has 90 degree corners that can hold screws or bolts. I use…
The shelf support brackets even when printed with PLA can hold over 100 lbs (tested) and have built-in mounting holes to attach to the wall. I printed mine on the sides with support material to hold up the hexagon webbing at 50% infill…
Hi Folks! Thank you for your patience. It’s been quite a long journey developing the FlexATX version. I had to wait for another BC-250 board to arrive because my previous system suffered a brownout after I accidentally caused a short…
Update 2025-07-26: Added a sturdier version featuring support beams for improved rigidity. This design is inspired by reinforcement techniques I used on a spool holder that previously flexed under load. Tip: Print both support beams…
No supports Maximum details Model in size 1, 0.75 a 0.5 scale.
Industrial Wargames Wall - Section 1 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Hello ! Wellcome to my little office with Prusa MINI +. I made industrial lamp with concrete base, retro bulb and soft pad made of recycled rubber. O.10 DETAIL Prusament PLA No supports 15% We will need: Concrete (fine concrete with small…
This is for the ultra nerdy be warned… I vastly prefer this industrial Brady label maker over consumer options because of the different size of labels and there ridiculous adhesion and durability and color options. This insert neatly…
I had made this from actual pipe before and decided to try and see if I could do in a 3D print. This is a full sized lamp but prints on MK3S (you can print on a MINI as well just use wood or make the base smaller) Lamp size : 200mm x…
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings. My own original work designed to be compatible with BattleTech and…
Introduction This repository is Meanwell LRS-350-12 Version. If you are looking for FlexATX version, please check this out. ⚠⚠⚠ A compact industrial-style enclosure designed for the AMD/ASRock BC-250 accelerator. This case was built…
Changed features provided in images; Much better airflow - including larger ventilation holes, rounded airflow paths, and additional airflow paths Ethernet Port - I read reviews from the original model and added a larger adapter port for…
I needed to spread an evenly thin and wide layer of SikaFlex glue in a recent project. So I made myself a modular system for a variety of parametric nozzles. When you first open the project file in FreeCAD it looks a bit messy… So let's…
FULLY MOVEABLE KUKA KR10 INDUSTRIAL ROBOT Consists of 7 separate parts. A great thing to understand the movements of the robotic arm. Each part contains holes for the protrusions of the adjacent part. this design was made by Yokata, the…
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings. My own original work designed to be compatible with BattleTech and…
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings. My own original work designed to be compatible with BattleTech and…
Description: It's an AA and AAA battery organizer with an industrial design. It can be placed vertically or horizontally. AA and AAA batteries can be stacked using holders of the same size. License note: This file is provided as a free…
There are three ways to print this. As single piece :- Please download STL file but there wont be any movements. Multiple Pieces :- Download 3mf file with Full_dismantled.3mf. BEST QUALITY OUTPUT . Please use the 3mf file for assembly…
I designed this for my King Industrial 14inch band saw model KC-1433FXR, It also fits Grizzly model G0555 bandsaws as these are the same bandsaws with different branding…. This has a much smaller slot that lets you get in close with small…
Industrial design furniture made from 3/4 inch water pipes. With these connectors, different types of furniture can be built from commercially available water pipes and wooden boards. The 3/4 inch water pipes (26.3mm) are available in DIY…
Dust collection is a difficult challenge with any bandsaw. Mine is a King Industrial KC-1433FXR and came with a very inefficient and essentially useless dust collection solution so I came up with this 2 part dust collection duct that is…
Another industrial building
11 different floor tiles for an industrial terrain. Each tile is 52.4x2 millimeters in size. They're not very tall, so they print quite fast. They've been designed for an FDM printer, but even a resin one will do the job*. Be aware that…
Keep your workspace tidy with this fully Modular Stackable Drawer System . Designed with an industrial aesthetic, these drawers are perfect for storing screws, electronic components, hobby tools, or small parts. The clever interlocking…
A set of futuristic ground vehicles for a generic SciFi setting, at 6mm scale. This set is designed to match the SciFi Road set of parts I have uploaded. This set is intended to be compatible with the other 6mm SciFi terrain sets I have…
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings. My own original work designed to be compatible with BattleTech and…
OVERVIEW: One assembled shelf bracket includes: 6 3D printed parts 4 screws M5x16 (you can use M5x14 or M5x18) One part needs to be printed with support 3D models are in the correct position in relation to the bed, no need to rotate them…
A lovely industrial lamp for your living room. Print instructions Buse : 0.4 mm Précision : 0.15 Température de plateau : 50° Température d'extrusion de la buse : 210°
Looking to dive into the world of industrial automation? This Industrial Automation Conveyor Belt project is the perfect way to get hands-on experience! Created in collaboration with PhaseDock and showcased at ECEDHA 2025 , this project…
Another industrial/steampunk inspired retro light Shorter print / fewer parts Check my other Industrial/steampunk inspired lamp @ https://www.printables.com/model/164129 Printing details Nozzle .4 Resolution .2 (speed is fine) Supports…
I love the Industrial phone stand model that @josh3D created. I wanted to use it on my phone, but the phone was too large. So I increased the width of the base and also extended the back up 20mm. While I was at it I created a Voronoi…
Finally, I managed to find a good concept for me to build my SciFi Industrial terrain line. Inspired by one of my oldest terrain designs, I finally was able to update this and present some really cool SciFi buildings you can use for your…
This is an industrial handle that works best in pairs. It is designed to be mounted on a vertical surface. With the 45 degree angle, it gives your hands a natural position for carrying a heavy fixture. In my case I use it for Inspection…
A 1:48 Scale Garbage Dumpster
Hello. I designed this hook to hold a motorcycle helmet, a backpack or any other not so light things. It has 4 attachment points for better grip to the wall. Designed using fusion 360. I like the look of steel structures, tried to make it…
Features: Flexible buttons. Reset button indicated with inset circle: Strong enclosure for impacts and transport Snap-fitting lid No hardware for assembly (only for optional fan) Mounting provided for 30mm fan (ensure your fan isn't too…
I designed this for a Parkside wall-based vacuum sucker to be compatible with my Kärcher NT 70/3 Me Tc vacuum, that uses the thicker DN40 (40mm ID) standard instead of the DN35 found in household vacuum cleaners. I recommend deburring the…
Industrial locker hook. Printing with no supports, 0.6mm, "speed" mode Exists in simple and double version Quick and dirty version made with Tinkercad
The Strider Collapsing Rod Stock From DI, A wonderful budget friendly printed alternative to metal & polymer collapsing rod stocks. Fully Open Source Files SBL1/Protean/Worker Collapsing Rod Stock Full Metal Rod Construction Quick Deploy…
With two designs, one whole for larger printers and another cut for printers with a bed of 180 or more.
A little project I modeled over spring break! It's an extremely small (271 mm) tank engine using almost entirely 3D printed parts! You just need to supply 15~19 suitable screws (I used #4 x 3/4" screws) & some glue! It is unpowered…
Industrial Controller Holder - my take on an industrial design inspired holder mount for a controller. Easy to print and assemble, this controller holder will make a nice addition to your gaming setup! Features: Easy to print parts,…
My mother wanted cabinet knobs for her kitchen that had an industrial/steampunk sort of feel, but didn't find anything suitable at the normal retail stores. She asked me if I could print up some industrial-looking gears which could be…
Remix of the Framework Industrial Mainboard Case by @Magmabow. It removes the expansion card slots so that it's easier to plug directly into the USB ports on the main board. It also makes it so that it can be printed in two pieces on a…
Perfect for TV remotes, gaming controllers, pens, tools, or everyday accessories.
This is an accessory pack meant for dioramas. Intended for 1/12 scale, they can be scaled as needed. One of the floor grates comes with an integrated foot peg and can be used as a figure stand (results may vary depending on figure).
A pack of industrial based miniature bases for all your wargaming needs (D&D, 40K and all the other abbreviations). This pack contains multiple bases and I'll update it whenever I add new bases to this category. I'll be discontinuing the…
🖖 LCARS Industrial Replicator Panel — Utopia Planitia Fleet Yards Make it so. Turn your 3D printer into what it always secretly was: an Industrial Replicator, straight off the drafting tables of the Utopia Planitia Fleet Yards. This…
It needs supports only for the feets. The doors stay in place with some semispheres.
This is an industrial style handle for your drawers and cabinets. It prints in on the large face without any support. I reccomend unsing at least 3 perimeters and 30% infill for the reqired strength. I included a parametric F3D file, so…
After trying to find a second mount for the UMR-I (it is supposed to be mobile after all...), I decided to just print my own. I plan to use the UMR-I for my parents as a backup for their very bad cable internet. But they want to also use…
Fits Whalen Industrial racks. 3/8" upper slot opening, 3.0" slot-slot spacing. Print recommendations: as this is a load bearing part, recommend at least 35% infill, 4 wall loops, 4 top shell layers, 50%+ infill wall overlap. Print on it's…
Print Settings Printer: Bambulab P1S Rafts: NO Supports: NO Resolution: Top-cover, Top-Pipe, Base-Pipe 0.2mm Resolution: screw, nut 0,8mm Infill:Top-cover, Top-Pipe, Base-Pipe 15% -20% Infill:screw, nut 50% 4 walls Filament : PLA
El “PLC” (Programmable Logic Controller, por sus siglas en inglés) es un dispositivo electrónico que se programa para realizar acciones de control automáticamente . Un PLC es un cerebro que activa componentes de maquinarias para ejecuten…
Industrial Phone Stand This is a rugged, industrial-inspired phone stand designed for durability and functionality. The design features a robust, mechanical aesthetic with reinforced ribs, mounting holes, and enough open clearance for the…
PRINT SETTINGS: Material: PETG recommended ABS/ASA for high temperature environments Recommended settings: - 5 walls - 45–55% gyroid infill - 0.24 layer height - Print on side for maximum strength Mounting: - Countersunk screw holes -…
A sleek, minimalist "wave" pattern that feels both organic and futuristic.hollowed-out design provides a sense of lightness and transparency, making it a perfect centerpiece that doesn't overwhelm a space.
Cool industrial aesthetic for your desk, garage, or man cave
Adjust the shelf in Fusion360 and show off your prints with this modern bookshelf design. Default dimensions creates spaces sized 40mm Long x 30mm Wide x 27mm Tall.
!!! This model is currently not updated anymore due to limited time. Tolerances might not be perfect. Some featured might be added some might be removed!!! I designed this Watch Stand compatible with the Apple Watch chanrging puck. It's a…
A rotary pipe valve time switch (yes i could have made is like an actual valve but longer and much harder to print out). print the 3 parts non printed part rotary switch - amazon, ali express etc heat shrink tubing tools knife and or…
This is a reference model of Waveshare's 100X Industrial Microscope Lens for Raspberry Pi HQ Camera. It is based on my own manual measurements. I am hopeful that someone will find it useful for creating their project. DISCLAIMERS: The…
I saw wiky1982's design and rather liked it, but it didn't fit the current standard mini lights we have in the US, which often have a safety latch on the side. So I redesigned it from scratch with a couple changes. Changes from the…
Industrial pen holder on your desk www.martintulak.sk @tulak3d
Printed without support with cylindrical pins (3mm diameter, 14mm length) you can connect multiple of these units together. CAD Model…
Love the design but would not fit my S23 Ultra. Quick remix and it's good to go!
This contraption is the result of a bored person with access to 3D designing tools. I, personally, like it, but tastes may vary. Comes in 2 versions: with and without a “reinforcement” beam, and should be printable without supports.
Your download will include all the files necessary to print the prop shown above. The piece is assembled using 8 M6 bolts and 8 m6 lock nuts, also a dab of glue or contact cement for small details like the wire conduits or fake bolts.…
I printed this for a demonstration of the plastic extrusion process. Hope you can find it useful too!
Increase grip comfort and style. MUST be used in conjunction with Praxican hideaway plates: https://www.printables.com/model/1383702-mlok-hideaway-plate-2-lug These plates are necessary to mount to MLOK. Recommended print settings: PLA or…
Industrial Hercules DJ Knob Set Set of 3 Knobs for the Hercules DJ Board.
The printable connection pegs for this part can be downloaded here and the single tile version can be found here .
This is an HO scale industrial light that you might see attached to modern commercial or industrial buildings. Print Settings Printer Brand: Prusa Printer: I3 MK3S **Rafts:** No Supports: No **Resolution:** .1 Infill: 30% **Filament:**…
Needed a way to attach hanging items to my shelfs, so I created a simple/quick print that uses the unused slots on my shelf. Perfect for hanging home decorations, pictures, etc. Printed in PLA but PETG would likely work as well. Happy…
Camera I use with lightburn software: https://www.aliexpress.com/item/1005007231905118.html
Industrial dome game objective for 6mm/epic scale tabletop wargaming My other Epic Scale Terrain projects: https://www.printables.com/@fractalnoise/collections/1040124
This is a rack/shelf adapter that just snaps in place for the black Costco Whalen rack. Remix it as you like. I will add more variants soon for tool holders and other things. I just wanted to get this out there because I couldn't find one…
I designed an industrial gearbox with two stages: 1. Stage 25 against 15 teeth (i=1,66) 2. Stage 27 against 15 teeth (i=1,8) Overall ratio is 1:3. It has a breather and a maintenance hole on top. It also features an oil drain plug. What…
Here is a bookend with a cast iron pipe design. This is modeled after the popular bookends as seen on Amazon and Etsy. Parts Pipes: I used Sunlu black PLA. Supports are required for this model to print properly. I experimented with a few…
A model I created for a Spaceballs-themed Halloween costume. Princess Vespa can't live without it! The hair dyer is hollow so it can serve as a purse and the grill detaches for easy access. My print bed is only 180 x 180 mm, so the model…
Old industrial lamp __________________________________ Pendelleuchte Industriedesign Print Settings Printer: Snapmaker 3D Rafts: Yes Supports: Yes Resolution: 0.1 mm Infill: 15% Filament: OWL-Filament 1,75mm PLA Multicolor Rainbow…
A smol planter pot for smol plants. (can add a colour change for extra style points). Width: 51mm, Height:40mm
This cover is based on a newer version of the HEPA filter: https://help.printer-box.com/home/download/#elf_l1_UHJ1c2EtYm94L01vZHMvMDA1X0hFUEEtQ2FyYm9uIF9maWx0ZXI (the one on Printables is the old version) The height of the cover and the…
This is a large bobbin that fits these industrial machines, and probably more: for Durkopp Adler 203, 204, 205, 166, 266, 366, for Seiko CH-2B, -6B, -7B, -8B, TH-6B, -8B, for Consew 2050, 751R, 754, 754R, 756, 756R, 757, 757R, 758R, 759R…
made hole with free support
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) CRUSHED CAN – PEN HOLDER…
This is a basic rotating holder for manually wrapping industrial pallets. It is designed for use in standard American plastic spools with a 3" (76mm) inner diameter.
Link to the Whalen industrial rack from Costco, item 956886. The top of the double bracket needs to be carefully positioned with the Whalen's holes then slide it down until you feel it's hooked in. Gently tap the bottom feet into the…
Hey team, I recently had a need to transport a ‘Size D’ Argon gas bottle and wanted to put together a dust cap for safe transport. The information for this threat was gathered from this website: https://www.hoseshop.net/blog/bsp-threads/…