1321 modeli
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Design This fidget has similar characteristics to a butterfly knife, but in a simple, smooth, and forgiving package. It's designed to print in place with zero supports, and has two weight options depending on how “slingey” you want it to…
Remix of a remix :) The original part didn't last a week - the tab on the outer ring broke from fatigue. Here's a redesigned version with a stronger (and simpler) mount. Enjoy! Print instructions Use supports
Spinning snowflake and star When printed at full scale, the two inner stars are able to rotate freely. At about 70% scale (depending of course on the printer) the tolerances become such that the inner stars can rotate but need a tiny bit…
L.E. by mistake initially i uploaded an old version of the inferior piece. I corrected this mistake. I apologize to all who have downloaded and printed the part. To make the design work unfortunately you need to reprint the inferior…
I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No (v2) Supports: Yes (v1) Check other Valentine keychains https://www.printables.com/model/1162970-my-sexy-valentine-keychain…
Which nozzle is the best in it´s spinning top version? Easy to print easy to have fun with. Just… let it rip! If you want a different nozzle version just let me know and send me a imagen in the comments Print instructions Print the…
Simple spinning plant pot or planter for your house plants. Best to be printed in vase mode (2 or 3 layers) - Prusament PETG - Mango Yellow
The bow and top "cross" of ribbons spin on a pin to release the lid from the base. Easy print, surprisingly strong.
These small tops are very light so they can be launched at high speed. They are easy to print, no support, no glue, no screw . You just need to clip the central axis up to the end and it's ready to spin (hold by the center when clipping…
This spinning top prints without support or other special configuration. The three parts can be easy assembled without gluing, simple snap in. And yes, this thing looks like the sign of a German car brand. Print instructions If you like a…
This is a spinning fidget shaped like a planet. It is completely print-in-place, no tinkering required. The only specified print settings that must be on are Supports, but they should be touching just the build plate. In CURA this setting…
This is a headband featuring a spinning dreidel (sevivon) for your next Hanukkah party! The dreidel is removable from the headband and will spin by itself, so you'll always be ready for a quick game! Update 2022-12-25: There is now a dual…
Due to the inner ring the shop vac hose can rotate freely (print in place)
I really enjoy designing unique fidget toys that can be printed in place in one shot on my Mini+. These toys serve no purpose other than they are fun to play with, expand my design skills using Shapr3D and really push the boundaries on…
This record adapter model includes easy-to-grab handles and features the famous “spinning spiral illusion” on the top. An easy print designed for .20 mm layer height with a .40 mm nozzle, and uses a simple color change in the slicer to…
A TOOOL (The Open Organisation Of Lockpickers) Box to hold tools for lock disassembly with a built in pinning tray and gutting station. Pinning tray includes cut outs for pin tumblers and disc detainer locks. Gutting station includes…
One of the first things I made to print on a 3D printer because it's something only a 3D printer can make. The middle nut will spin after all the supports are removed. I've uploaded the SolidWorks part files for this so you can edit as…
Vytvoril som spojku pre pôvodnú točnu, nakoľko nedržala pokope.
The NozzleTip SpinningTop! The Spinning top that glorifies your nozzle after it has been a faithful servant! Don't throw it in the bin, just let it spin! You can finally do something fun with your old and worn-out nozzles! This is my…
Supporto inferiore per attacchi appoggia braccio su bici da spinning Kettler. Stampato in materiale Asa, 1 Layer a 0,20 , gli altri a 0,25.
This is one of three winning designs in Joel Telling's filament shelving system spool holder contest . A filament holder that just hangs from the front 1x2 will cause it to twist and warp over time and will not be very sturdy. My intent…
Een speelgoedje van uit de oude tijd maar dan in PLA plastiek. Het best gebruik je een nylon touw dat kan je aan de voorkant warm maken en een puntje aan duwen. Zo kan je het touwtje gemakkelijker in het gaatje steken. An old-fashioned…
Intro A clean and elegant twisted spinning top that spins incredibly long and stable . Perfect as a small desk toy, fidget, or simply a beautiful kinetic object. The twisted body is not only a visual highlight – it also helps to keep the…
Get in on the hype! Welcome to the gear ball! A fun mind blowing fidget toy you've probably seen on social media, but had no clue how it works! Well, rest assured, with these profiles you can make your own free spinning version! The best…
Ones assembled, the Death Star is locked and can only be disassembled with a trick: Spin it really fast! Size: 45mm - DO NOT scale - won't work well. Comment if you want another size or if it's too tight / loose :) Print takes about 3h,…
A smooth-spinning fidget top designed for long rotation thanks to its balanced shape. The model is printed completely without supports and does not require any glue for assembly. The two parts are connected using an internal…
Enjoy my Magic Spinning Bullet! Impossible to spin the normal way - challenge your friends to get it to spin! Print settings: You have to use my print profile - there are a lot of settings that need to be just right! Will not work, if you…
This innovative spinning top is designed to offer a unique play experience with its threaded interchangeable stem, allowing for easy combination of two different colors. The stem features raised stripes to improve grip and increase…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Fun fidget toy you can spin around your fingers making tricks and impressing your imaginary friend! Print a Christmas Chain of appropriate length (I'm using length 14, it feels nice) and attach the Ring and End to the chain. Ready to…
Ones assembled, the Cube is locked and can only be disassembled with a trick: Spin it really fast! Size: 35mm - DO NOT scale - won't work well. Comment if you want another size :) Print with: No supports Elephant foot compensation: 0.2mm…
A modern planter / pot design for your plants. it's easy to print and has a great ilusion of spinn in it :) I suggest printing it in 2 or 3 layered vase mode. Happy printing!
This 3D-printed fidget model features a sphere inside an octahedron. The sphere has just enough room to move freely inside, allowing you to spin and rotate both the sphere and the octahedron in a few different ways. For the best visual…
360° Spinning Adapter for the Multifunction Arm Mounting System What you need Multifunction Arm mounting system (Small Arm System) Big Clamp For Small Arms This Spinning Adapter Side small-NUT-M3.stl (1x) screw-small.stl (1x) Hardware…
The toy really spins. Print tips: pla print on the side needs support
Simple spinning plant pot or planter for your house plants. Best to be printed in vase mode (2 or 3 layers) - Prusament PLA - Gravity Gray
My design of a spinning top with a geared puller. For stronger pull-rack try: https://www.printables.com/model/98919-stronger-pull-rack-for SETTINGS: Spinner top part: Layer Height: 0.15 ; Infill: 80-100% Spinner bottom part: Layer…
WhistleSpin WhistleSpin is a compact spinning toy that combines smooth rotation with a satisfying whistle sound. Simply insert the ripcord into the launcher, pull it quickly, and watch the spinner launch into a fast, stable spin while…
This 3D-printed fidget model features a sphere inside another larger windowed sphere. The inner sphere has just enough room to move freely, letting you spin and rotate it within the outer shell in a couple of different ways. For the best…
Tried making this spinning shuriken as a way to try and reverse engineer one i saw online. I'm including the bearing without the "spikes" so one can try the tolerances first before printing the whole thing. The shuriken has a diameter of…
Rules: -Weigh less than 50g -Cannot be assembled -Must open to accept 8mm shackle The competition was a head-to-head tug-of- war, last to break wins. We could choose between PLA, PETG or ABS depending on the opponent we were up against.…
This is an ornament to hang on your Christmas Tree. It has inner rings that can spin and a small snowflake in the center that can also spin.
A spinning Heart Its print in place, perfect for your loved ones.
This innovative 3D model is a makeup organizer boasting various compartments for easy categorization of your cosmetics. It comes with a separate base, specifically designed to enable spinning functionality for convenient access. The 3D…
It's a spinning top optimized for a good runtime, but without the need for additional parts (like a ball bearing for the tip). My best run was two and a half minutes. Print with 100% infill and random seam placement . Sanding the tip…
I designed a spinning ornament/decoration to be printed in place, no supports or rafts needed. After the print, simply cut away the small tabs (marked in purple) holding the spacers to the stars with a blade, and it should free with a…
Inspired by the movie Inception.
A very satisfying little mechanism to play with, and also practical for storing small objects! For assembly instructions, please visit: https://www.starryodyssey.com/design/mechanical-spinning-top-box Important: Step 2 must be followed…
The Super Spinning Top is designed to spin longer, smoother, and more satisfyingly than your average desk toy. Its wide base and low center of gravity reduce wobble, while a finely pointed tip minimizes friction for maximum rotation time.…
A Lite Version is now available where the bearing is not required @MrGira designed a sweet remix that you may want to check out as well INTRODUCTION This tiny spinning top is a real beast! You won't have any trouble getting it to spin for…
Product Description: Introducing the Pull Copter, a 3D printable toy for kids and kids at heart. It comprises just three parts: the pulling rod, the propeller (or spinning top), and the base. There's no need for assembly—print, play, and…
I designed this simple spinning heart keychain, to be added into kid's gift bags for Valentines Day I printed 22 for my son's school Valentines party. We put them in gift bags with chocolates, because what kid doesn't want a toy with…
This is a prize wheel I made as a gift. It uses a standard 608 skateboard bearing (22mm OD, 8mm ID, 7mm W) and 3 M3x10 flathead screws. Assembly is pretty straighforward. Press fit the bearing, snap on the wheel cover, and screw in the…
ADDED FIXED FILE: giraflor_fixed Fixed ring shape to not float over the bed , dont need support. Flower-shaped gyroscope earrings. All parts are printed at once. Earring hooks are needed. Print instructions Layer height: 0.16 or lower.…
A fidget pen I made as I could not find any alternatives that were easy to print. Prints without supports if you print it vertically, or print it horizontally with supports for better strength ( I personally use the vertically one as it…
Lock Pinning Tray (LPL style) by Dr. Lex Remix. Easy to print! There is a small groove in the bottom of the pin slot that allows you to place the little nub on directional Medeco pins. This slot serves to orient the pin as to easily…
Inspired by basicweech , thank you! I'd seen bullet roller d6s, so I wanted to 3d print my own, and provide a spinning fidget case. I printed the dice in resin, and the case in FDM - but you could likely print both with either. Feel free…
This pencil topper prints in place and should spin freely without supports needed. It was designed by myself as a gift from a teacher for elementary grade students. The model was created to use the manual color change option in prusa…
This spinning top is influenced by SpinForevers £50 product here . The top is designed to have 2 parts that screw together print them all at 100% infill to get the most spin out of your top
Spinning tools in two parts (no glue, screw). No supports. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Mechanical Toys
Update 3-11-2019 Added revolver shaft that can be printed horizontally, credit goes to zaijian for making that improvement. Update 8-30-2017 Changed the stand to accommodate 2 bearings which helped with wobble. It is much sturdier now.…
Its just 3 similiar spinning tops. No supports needed.
A tiny World Globe that can be assembled in parts or printed as one part. Also includes "just the globe". You can read about how the globe was created at: Enely's 3D - The World Globe Print each half and glue together to avoid support.…
This model is somewhat difficult to print. I was successful only from the third time. Fortunately, these attempts take a little filament. And if you, like me, do not have significant experience, it is better to order a print by…
The STL files were fixed again by @tbkMAKER and now everything works! Why is it better than the others? My spinning filament swatch box stands out due to its excellent storage design, which allows for smooth rotation. Additionally, the…
Makes a great fidget toy I love just the feel of the top in hand and it spins on just about any flat surface. There are a few well-being benefits of such a toy such as: Stress relief: Fidget toys can help to relieve stress and anxiety by…
Introduction I've remixed my Ultimate Mini Spinning Top so you can use up the rest of the steel balls from the 8x22x7 ball bearing. Ideally you have a 4 mm or a 5 mm steel ball for this design. If you don't have a bearing at hands there…
A model by my 15-year-old son. This interesting and functional spinning globe ornament was made after learning how to project a two-dimensional image onto a spherical object. A map of the world being the most obvious candidate for such an…
Wind turbine holds 2 or 3 skateboard bearings. The 3rd is optional, but it can mildly improve rotational stability. Airfoil is designed with an industry accurate -15 degrees of twist. To be functionally accurate, the turbine should be…
This little top is designed with only purpose in mind. Endurance. The steel ball at the bottom makes for almost no friction, and the body is 100% infill and very low to the ground for max rotation! Spinning for over 5.5 minutes at max,…
A spinning top that creates an illusion of a floating exclamation mark when spun. Dimensions: Width: 85mm Height: 50mm
Use-case My award winning geared clamp hook was purely for screwing it to a wall. That did leave users out, that could not drill a hole in their intend surface (e.g. the door of a fridge). This problem should now be solved with this…
Printed 18 of these for my daughter's preschool valentines. The heart cutout spins well if your printer is precise enough. Print Settings Printer Brand: Creality Printer: CR-10S **Rafts:** No Supports: No **Resolution:** .16 Infill: 10%…
A satisfying print-in-place fidget working right off the print bed that you won't put down. Super fun, but small enough to put in your pocket. Originally I made not to be a torture test but after realizing how hard it is to print I made…
Prints in place without supports or rafts. I used an Ankermake M5 with a 0.2 resolution and 10% infill. The filament used in the example is PolyTerra Army Red. If you'd like to sell prints of this I offer a partnership tier on my patreon:…
I wanted to test the parametric settings in Fusion 360 and ended with with this ring. Load into Fusion 360 and go to Modify->Change Parameters to change these settings: ring_inner_diameter ring_width rim_width spinner_thickness spacing #…
This propeller toy takes flight at the snap of a finger! Simply grip the handle between your finger and thumb, then give it a quick twist and watch it soar. Cura Print Settings: Orient with handle pointing up 0.2mm layer height or less 2…
Pull Start Spinning Top Launcher This is a mechanically powered spinning top with a rack and gear launcher. The top is accelerated by pulling the rack, which spins the gear inside the launcher and gives the top a fast and smooth start.…
The Spinning Ring. (Flash Contests Ring's) Fashionable design, Prints as one piece (requires support), Very strong design, Great fidget tool, Would also be great if the inner and outer were printed in contrasting colours to show it off…
This is a remix of my own mashup remix Fidget Octopus Ring. The headless spinning octopus ring now has a head!! I got a request on my original headless model to make it with the octopus head, but I wasn't sure if they were requesting the…
My daughter loved this model but asked for it to not have the words. Printed using Prusa slicer with a pause about halfway through the model on our MK3S.
A playful Capybara with the spinning oranges! To print objects faster, I only used two colors for the AMS, the body and the oranges. I used the markers to draw the eyes and blush. You can apply a little force to twist the top orange, and…
This combines the ball bearing spinner from “Sonic The Hedgehog Fidget Spinner” with the character model from “Tails - Classic”. The result is a 100% anatomically correct (wink wink) model with spinning tails. Printing instructions Find…
This is delicate. There's no way to design a top that spins well and can survive rough play when printed in PLA. The stem will break in seconds. See “Playing with Your Top" below. Note: My PrusaSlicer project file and GCODE both use GCODE…
This is a fun and creative way to keep your hermit crabs moving all night long. This climbing toy has a base and a disc on top that when assembled correctly, will spin freely for your hermit crabs to walk on. I made multiple designs and…
WDT (Weiss Distribution Technique) is a method of espresso preparation to evenly distribute coffee grounds in a portafilter to ensure a more even extraction of coffee from the espresso machine. This tool uses several needles spinning in a…
spinning top with rack and pinion spinner like a beyblade kinda the more infill you use the longer it will spin snaps together with zero tolerance press fit mates. prints in 40 minutes at .20 speed pla settings
Video on Vimeo: https://vimeo.com/676853535 Inspired by spinning top from Nick_Groot ( https://www.thingiverse.com/Nick_Groot ) I have designed this version. The advantage of this spinning top is that the tip is screwed, so it should…
I have enlarged the painted turntable to 25cm as well as adjusted the foot. It is very fast and easy to print without support structure Thx @ https://www.printables.com/de/@Kahnindustries ich habe die lackier Drehscheibe auf 25cm…
This model is one from my extensive Children's Toys Collection . A simple and fun spinning top designed for easy and completely support-free printing. The large outer ring provides plenty of rotational mass, while the shaped handle makes…
This is a spinning spray bed i knocked up to prime and lacquer some models. Its a little unstable, if anyone wants I can extend the legs or add an outer circle. Works fine as it is though There are 3 1.75mm indents in the top incase you…
A spinning top die. For those of us who don't like rolling. It's perfect for long or short spins. See it in action here: https://imgur.com/a/JZ7NSex
ORIGINAL : The combination of a pull copter and a spinning top. It launches into the air and keeps spinning on the ground. To launch, hold the launcher with the ripcord in the side with an arrow. BATTLE : Also launches into the air and…
This model is one from my extensive Children's Toys Collection . Printing information Layer height: 0.20mm Perimeter: 4 Infill: 15%, 0-21.2mm 100% Support: none I am looking forward to your Makes! :-) If you like this design, feel free to…
A awesome stressing toy and smooth spinning rings.
Keyflipper is easy to print thing for your keys you put it on your finger and you spin it it does need a 603rs bearing thickness is 5 mm and outer size is 27 mm inside doesnt matter as you need to buy it for your finger
Remix from: https://www.printables.com/model/767068-spinning-filament-swatch-display-lifts-swatches/remixes Wanted to have the model spin both ways so I just mirrored the ramp. Let me know how it prints for you! Mine worked great.
