764 modeli
The special thing about this Fidget-Cube in comparison to similar constructions is: there are balls inside the cubes (please do not ask for the deeper meaning, it's a toy) the cubes can be printed individually, in different colors and…
Wydruk około 1,50 €–1,83 € nettoWstępna wycena jednego wariantu
Can be printed without support
Wydruk około 9,26 €–11,31 € nettoWstępna wycena jednego wariantu
Why should I use this desiccant container? It's sized to fit into any spool from .5kg and up. It uses much less desiccant while also maximizing the water absorbing surface area. The desiccant can be rapidly dried in a microwave,…
Wydruk około 10,13 €–12,38 € nettoWstępna wycena jednego wariantu
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
For some reason I can't buy proper calipers where I live and ordering one would have taken too long. Needs a bolt, M6x16 or M6x20 should do, as well as M6 nut - all of those should be 10mm wrench size.
Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu
Inside and Outside Corners Wargames Wall Sections - Section 3 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your…
Wydruk około 7,64 €–9,34 € nettoWstępna wycena jednego wariantu
A simple inside radius gauge for 1-15mm. Eine einfache Innenradiuslehre für 1–15 mm.
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
This simple clip allows you to take accurate measurements of inside corners with a tape measure. No more guessing what the length is inside the bend! Just slide the clip up to the corner, pull the tape back and read where the edge lines…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I use USB web cams on both of my Voron2.4r2 printers for 2 years now. I use a 8mp USB Camera Module with 3.6mm Lens and made the cases for it. This mount has the following advantages over other full sizes cameras for monitoring prinitng.…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Includes radius's from 1mm to 10mm. Note that I added a chamfer to ensure squish of the first layer doesn't compromise the accuracy so ensure you keep the tool square to the object being measured and use the center of the tool (not the…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can put an IKEA GODIS glass in the vase and fill it with water for flowers. Glass IKEA GODIS 40cl has a diameter of 75 mm and a height of 160 mm. You can also use another long drink glass with similar dimensions. The vase can be used…
Wydruk około 14,31 €–17,49 € nettoWstępna wycena jednego wariantu
Most door hooks attach on the top and are accessible only from the outside (when the door is closed/the direction the door opens to). This model is accessible from the inside while the door can close normally, without any obstructions.…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Surprise! Turn your Christmas tree into a treasure tree! These decorative baubles unscrew to reveal a secret compartment for small gifts or clues. Great for creative gift-giving, holiday games, or just adding a clever twist to your…
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
A unique model of an off-road vehicle, inspired by the dream car of everyone - who wouldn't like to dive trough the desert with the G63 AMG 6x6? Now you can too, at least in the sandbox. The icing on the cake: make it as long as the…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
Testcube for mk3s with mmu I also use the test for the different shrouds - you can see from the sphere how even the air distribution is
Wydruk około 3,11 €–3,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x193.79mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Wydruk około 1,93 €–2,36 € nettoWstępna wycena jednego wariantu
Update 17-Jul-2024 : After extensive use and hanging more than one towel on the hooks, some of them broke. Added V2 of the design, which is stronger. A simple towel hook to mount on the inside of a door. I couldn't find one that mounts on…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Sidebox right for Enclosure with MK4 inside (and for additional spool holder) Why a new box??? First I print this one: Prusa Enclosure SideBox von XBurgy | Kostenloses STL-Modell herunterladen | Printables.com I thought I can use it, but…
Wydruk około 8,69 €–10,62 € nettoWstępna wycena jednego wariantu
Hi everyone, I share with you today this part of a "moulin à poivre" (in french, but) pepper grinder in english ;) My one was broken inside, after dismantle it, I've seen that the spring tensioner was broken and some plastic parts was…
Wydruk około 0,92 €–1,13 € nettoWstępna wycena jednego wariantu
Clips inside drawer to hold one or three Sig Sauer SP2022 magazines. This is designed for a drawer side-wall of 12 mm. STEP file included, feel free to modify or remix. Could be pretty simply modified within slicer as well. Recommend…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Rollup Garage Door Inside Handle I was tired of the cold metal handle cutting me and snagging my sweatshirts. I also mounted mine at a 45 deg angle making it easier on the wrist. This is mounted on a winterized version rollup garage door…
Wydruk około 7,06 €–8,63 € nettoWstępna wycena jednego wariantu
A system which can be used to create multiple Dolce Gusto capsules holders, Each part is 170mm length. There are two types, single for the top and bottom and double for the middle. Additionally there is a distance model for screwing the…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
I needed an inside connector to make larger compartments on 3Dprintbunny's snack pot. Took the original middle pot model and removed the bottom.
Wydruk około 1,07 €–1,31 € nettoWstępna wycena jednego wariantu
it is a keychain and have fun.
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Since a variant of my fidget gear rings with knurling on the inside was occasionally requested, I made this one with diamond knurling outside and inside. It is available in 4 ‘odd’ sizes: 15mm, 17mm, 19mm and 21mm inside diameter. Also…
I modeled this vase after i did the luxury vase, because i wanted one thats easier to scale. I also made a tripleversion of this, and changed the design a tad for that. Looks also amazing printed. :) Prints best with an 0.6 or 0.8mm…
This 3D-printed fidget model features a sphere inside an octahedron. The sphere has just enough room to move freely inside, allowing you to spin and rotate both the sphere and the octahedron in a few different ways. For the best visual…
A small cylindrical container with a lid that screws inside the top. A generic small container for a travel essentials contest seemed a bit of a stretch, but I actually did take one or two similar containers on my last few vacations for…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models to find something else you might enjoy! ********** [Update April 4, 2026] if you are looking…
This 3D-printed fidget model features a sphere inside another larger windowed sphere. The inner sphere has just enough room to move freely, letting you spin and rotate it within the outer shell in a couple of different ways. For the best…
Mine kept shearing and breaking apart in use - so I made the inside of the components with gears solid - this seemed to make it stronger. I printed with 20% infill.
The original design was great https://www.prusaprinters.org/prints/22608 but there is always room for improvement. The original designer, Tetralite, did his own update and made a version 3. https://www.prusaprinters.org/prints/74621 . I…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
The top eggshell will snap onto the top of the chick so it stays put while you have fun clicking! Fidget with or without the eggshell on top. Parts needed - MX Style Mechanical Keyboard switch Print with supports on auto, all in the…
For my entry to the PrusaPrinters button contest, I decided that I would make my entry entirely within PrusaSlicer. Using the built-in shapes, I was able to make 7 different buttons featuring different holes, colors and even made one that…
Through Rhinoceros I designed an empty cube that contains a sphere inside. For the sphere, I decide to use the Meshmixer program where I edit it and apply a Voronoi pattern. To know how to use the Meshmixer and how to apply different…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
Anger (Inside Out) You can print in PLA, PETG, ABS. Support are little hard but you can remove them very easily. (Multicolor Version Coming Soon :D) Enjoy
Calibration cube with a city on the inside. There is a lot of fine details to test your printer. Mine just looked like some spikes in a cube. Print Settings Printer Brand: Monoprice Printer: Mini Delta Rafts: Doesn't Matter Supports: No…
This new model is actually something I did mainly for myself, but of course I wanted to share it with all of you ☺ On June 4th I turned 30yo and officially entered a year and a period of life where you, let's say it, officially become an…
This organizer shape was designed so the pouch would easily slide in each niche while spreading the contents inside evenly to save space. All the pouches can be seen and easily taken from any angle. Prints with no supports :) As usual,…
15% infill 0.20mm Supports on for plants and geo pot
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
Update - January 2025 I have uploaded a new version of the main body that is slightly stronger at the base (non-lid end). The lid is unchanged, so all lids are fully compatible with all bodies. Dog poop bag holder for Flexi leash I made…
3D Print a D20 inside an icosahedron inside a dodecahedron to test water soluble filament. Slice settings on learn guide: https://learn.adafruit.com/how-use-to-pva/overview Print instructions Licence: Creative Commons - Attribution…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
A pretty run-of-the-mill desiccant container. Remixed based on Tenshe's design because the 2mm silica gel beads were too small and fell through the top and bottom holes. I also didn't need the space for the hygrometer, so I was able to…
Optical illusion processed in HueForge. My first HueForge attempt. 200 x 200 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA…
NOTE: as requested in comments (in Russian!) as of Sept. 21, 2025, this listing now includes a remix that covers up the ventilation hole while also provided a mount for the buck converter. For adding LED lighting to the non-pro version of…
i wanted to make my own. :-P
A cool voroni heart statue I found on 3dmag.org and thought I would share it on here fro valentines day
Because nothing says welcome home like a gargoyle guarding your door with eternal vigilance. Perfect for adding a gothic touch to your entryway. The ring prints enclosed in the mouth and rotates freely with a little tension break. Prints…
Bonjour les amis. UPDATE 22 FEV 2023 Seconde version avec les numeros qui ne traverse pas complètement la pièce afin de pouvoir faire un changement de couleur comme dans le…
infinity cube fidget with spere cut out in center, can fit a ball in there, 25mm. I print the ball in two half spheres, and glue them together. Category: Tool Holders & Boxes
Update - January 2026 I have uploaded a new version of the main body that is slightly stronger at the base (non-lid end). The lid is unchanged, so all lids are fully compatible with all bodies. Carabiner mount dog poop bag holder This is…
If you don't have spools wider 75mm, then you can use this remix. It has a inner with of 80mm. The original inner with is 100mm, so it saves 20mm of space on the shelf. Also included is an 3mf that fits the whole box on a MK3s+ bed,…
Second of the modular paint racks to store and organize hobby paints. This one is an inside 90 degree corner to help with wrapping around your work station. I designed this to hold Vallejo or Reaper dropper paint bottles. I will be adding…
Es sind die Innenseiten der verlinkten Buchstaben, nur etwas modifiziert, damit sie etwas stabiler sind und sich meiner Meinung nach das Licht besser verteilt. Viel Spaß beim Drucken und Basteln ;)
Part of my ongoing series of models to enclose my Mercury One.1 These stepper mounts do three things: They are contained entirely within the frame of the printer so that the printer can be easily enclosed using large, flat panels. They…
Inside calipers are used for taking a measurement where rulers or digital calipers will not fit or reach. Reach inside the object and set the inside calipers to the distance to be measured, then remove them from the object and measure…
Be careful of supports on the tie.
I made this just to learn 3d modelling, if anyone could print and paint it, i would be gratefull. Made for personal use.
Wasn't particularly thrilled with most of the LED diffuser channel corners out there, so decided to create my own. These were designed to be as close to an exact fit as the end-caps that come with the channel, and as minimalistic as…
AKA “Hidden Belts Mod” AKA "LR3 Superstrut-encased Y belts" New v2 for LowRider v4: NEW as of October 6, 2023: now either or both Y belts can be hidden. Initially I only hid the Y-max belt (non-rail side) as that's the one I really needed…
I'm using these 3 inch square HD inside corner brackets (scaled at 75%) to frame out a double tall printer enclosure for two (2) more MK3S+ printers. The ones I've printed in the photo are with a .6mm nozzle at .4mm layer height on draft.…
for cat lovers 🤣 Please let me know if something doesn't fit. Update: i added support for the case.
Case for Cricut tools. The inner part of the original Cricut Tool Case with a solid bottom for printing faster with no supports needed.
Made in response to Keon Burkink's post / founding of the possible cause for Slot 3 (and possibly 2) PTFE tube not a straight enough feed to the filament hub inside the AMS and causing failure in pulling the filament out. So he drilled a…
I created this project poster stand for work I do with a non-profit student organization. Hands On Prosthetic Engineering - HOPE Currently we are reworking our website, Sorry! HOPE @ Facebook We build 3d printed hands for children in…
Can your printer handle this vase in vase mode? This is definitely an experimental design (There may be some weird lines when viewing the model, but it prints perfectly fine 😉👌). This model will also work nicely with two or three…
If you own the Milwaukee Insider Ratchet there is a 1/2" anvil accessory available but Milwaukee doesn't provide an additional socket / adapter holder. Take off one of the end caps and slide one of these on; there's room. I printed with…
Here is a cat toy with inner ball built inside of it. my cat goes crazy about this one! Brim and some supports are recommended, so you need to clean up the print afterwards to set free the ball inside. have fun!
hydro drip ring, 100mm inside diameter. fits 1/2 inch / 13mm hose. print the ring with supports on build plate. i used 4 clips per ring, which clip right on, don't cover the holes on the bottom. Included fusion 360 file and STEP Print…
I loved the model made by @AlMon, but I couldn't figure out how to get the guts into the shell once printed.
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
Fender support part for Kukirin G2 Pro. Printed it with Bambu Lab PETG-CF. Slicer settings: 0.2mm layers; 4 perimeters; infill 40% gyroid; laying down on the broadest side; supports needed.
These tensioner blocks have been designed to do four things: Bring the tensioner blocks entirely within the frame of the printer so that the printer can be enclosed with large, flat panels. Delete the front crossbar for easy access to the…
Small brackets come in handy for various uses. I used them to stiffen the legs on an IKEA Lack table. They are pretty effective while being unobtrusive. Check out these other things for IKEA Lack table... Stacking leg couplers:…
Open 3MF file in PrusaSlicer to edit fields. No Supports! Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it…
A great wall art of Sadness (Tristesse), from Inside Out (Vice-Versa). Do not forget to LIKE the model and upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-) Inspired by…
A nice gift for that special someone in your life for Valentines Day. Big enough for jewelry or other small item to be placed inside. I printed in PLA with no issues. I did use supports around the rim of the lid to support the edge. If…
Instructions: Print both halves Clip them together (option) color the text with a marker or acrylic paint Cut a picture and put it inside (19x13 mm) This is a collection of all my valentines designs: ValentinesGifts Express your love in a…
Tenshe's excellent design was updated to be able to hold smaller silica beads than the 3mm ones recommended for the original design. Using 3-5mm beads is still recommended even with the remix, but this model should not allow smaller beads…
i didnt have a hygrometer ;-) prints with 0.2mm layer. but the one in the picture is printed in 0.44 with a 0.6mm Cht.
3D modelled spa from the anime Spirited Away with all the rooms inside!!! This whole model is in "Voxel" style so it is cubed. Inside the model there are real rooms like in the movie.
See more details and a video of the effect in my reddit post . Disclaimer: yes, I know this aren't actually holograms =) Instructions below are based on OrcaSlicer, I haven't tried this in other slicers. Necessary modifications to the…
Desiccant container that can be tightened inside of the filament spool. It wont roll around or fall out. Remains flat against the outside so fits in AMS of the X1C, or storing, drying, etc. Adapts to different widths and spool sizes.…
FULL CREDIT TO cncartist ON THINGIVERSE. UPLOADING TO SHARE WITH THIS COMMUNITY. Summary Here are a couple threaded containers for miscellaneous item sizes. The 2 parts thread together quite well and I have provided different…
Move the end-stop to the inside of the frame
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
Model can be loaded in Bambu Studio and Orca Slicer. I have printed the part with letters facing down. PETG, 0.4mm nozzle.
32mm spiral hose connector from Mirka sander to 35mm dust extraction hose. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.1 Infill: 25% Filament: Prusa PLA Silver Category: 3D Printing
Mercury One.1 Inside Frame Stepper Mounts Modified mounts that keep the stepper motors inside the frame of the printer for easy enclosing. I wanted to enclose my printer without buying new extrusions (…
Allows stacking of two IKEA Lack tables. The side marked with TOP is screwed onto the top of the bottom table with the brackets facing to the inside. Due to the inside mounting, the outside dimension of the table remains the same. Note…
A 90 Degree corner for a Red Sea aquarium screen lid.
Our Starlink cable enters the house through an exterior wall and through a junction box on an interior wall. This allowed for the junction box to be covered at any point in the cable run. Hope this helps some folks, enjoy!
A couple tool box trays to hold the metric Milwaukee Insider sockets. I found that the rail that comes with the sockets is too annoying to use. The newer socket adaptors that come with the spring loaded retention feature have to be…
Will fit all of the Milwaukee Insider Electric Ratchet bits that come with the tool. Designed for the OlsaTools Tool Grid Platform. Printed in PLA+ with 0.2mm layer height, 15% infill, supports enabled, and 4 wall loops.
This idea was inspired by the survival paracord bracelets that are meant to ensure the wearer always has a length of cord. I always liked the Monkey's Fist knot, and thought why not put something useful inside rather than a wooden ball?…
![Anxiety (Inside Out 2 Fanart) 30th Birthday [Single Piece]](https://media.printables.com/media/prints/923696/images/7048697_f29466be-e8e8-4e95-b9c1-9f1705b3b0eb_79c3a1b7-a29b-4f0e-8d6e-f72ae2ee29fc/anxiety-inside-out-2-30th-birthday-fanart_render.jpg)
![[improved] Flexi Leash Dog Poop Bag Holder - Compact and Lightweight - Stores both Clean and Used bags - Poop bag roll dispenser storage inside and loop hook for full waste dog poo bags outside classic lead](https://media.printables.com/media/prints/1065815/images/8064434_3fb5692b-4c50-4329-b99a-209ed14d3893_52f5bdd9-190f-4f3f-bd91-414c9d94cc4b/04.jpg)
