Wyniki wyszukiwania: irri

Sortowanie

367 modeli

7-Inch Irrigation Ring With 0.375-Inch Tube Inlet

This is a 7-inch diameter irrigation ring designed to be used with 0.375-inch ID Tubing. Use a small ball valve to adjust the flow rate of the water through the ring. This works perfectly with my 2-Liter Soda Bottle To 0.25-Inch ID Tube…

Wydruk około 3,51 €–4,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
467
Polubienia
97
Ocena
5
P
Printablesandrox

Wifi addon for Claber(R) irrigation control

The box fit with an existing claber irrigation control system (this is the 8425 aquauno pratico) that drives a solenoid 9v valve. The original one has a simple start/stop button. Here I used a ESP8266 with tasmota firmware, a DC-DC…

Wydruk około 4,63 €–5,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
42
Polubienia
10
Ocena
0
P
PrintablesXYZ.Thought

Automatic PET bottle watering \ drip irrigation system ''sturdy and easy to print''

It is a system that helps to keep the soil moist wherever it is needed in a flower bed, garden or flower pot. Tested with a 1.5-liter bottle of mineral water, it lasts up to 4 days, but all standard bottles are suitable, I recommend…

Pobrania
10 087
Polubienia
2328
Ocena
4,68
P

Garden Irrigation Spray System - Garten Bewässerung System

Hi here you will find a garden irrigation system like the manufacturer gardena has. Free under the motto "Why buy, when you can print it" ;-) I have designed it modularly and as GlueEdition so that you can connect different ground…

Pobrania
2752
Polubienia
674
Ocena
4,88
P
PrintablesMicromet

Drip Irrigation Ring

Drip irrigation ring for containerized plants. Two sizes are provided - 100 mm and 120 mm. The Openscad file is also available for customization - you can vary the diameter of the ring, diameter of orifices, and the number of…

Pobrania
2447
Polubienia
507
Ocena
4,71
P
PrintablesOshhe Yt

3D Root Watering Spike 15cm - 360° Irrigation System

Title: 3D Root Watering Spike 15cm - 360° Irrigation System Description: An innovative and effective solution for indoor and outdoor plant care! This 15cm watering spike is designed to deliver water directly to the root zone, preventing…

Pobrania
2153
Polubienia
856
Ocena
3,33
P
PrintablesLupis1

PET bottle irrigation spike

The cap is designed to fit PET bottles (with thread PCO1881 which fit all bottles I could find in my household) and turn the bottle into a water irrigation system for e.g. flowers. The cap is printed without support, but a 0,2 mm surface…

Pobrania
1166
Polubienia
195
Ocena
3,73
P
PrintablesZakoplex

Water change diffuser for refilling without stirring up the tank

Easy to print. Just turn on organic supports and it should be dandy. Diffuses the water being poured into the tank when topping it up. Hope you like it!

Pobrania
1055
Polubienia
314
Ocena
4,75
P

Irrigation Fittings

You definitely need to print these in ABS or another plastic that holds up well outside. The valve needs 3 rings to function properly without it, and will leak.

Pobrania
1052
Polubienia
147
Ocena
5

5.5-Inch Irrigation Ring With 0.25-Inch Tube Inlet

This is a 5.5-inch diameter irrigation ring designed to be used with 0.25-inch ID Tubing. Use a small ball valve to adjust the flow rate of the water through the ring. This works perfectly with my 2-Liter Soda Bottle To 0.25-Inch ID Tube…

Pobrania
975
Polubienia
200
Ocena
3
P
PrintablesMakerMeik

Drip head for garden irrigation system (like Gardena Micro-Drip)

This is a drip head for my garden irrigation system, based on the Gardena Micro-Drip hose. I use it to irrigate my tomatoes and chillies with the water from my rain barrel. I have put together a short video of my irrigation system:…

Pobrania
888
Polubienia
129
Ocena
4,67

2-Liter / Soda Bottle Cap to 1/4" Drip Irrigation Adapter

This cap is designed to allow you to fill a 2-liter bottle with water, and then attach a hose that will slowly drip the water into a plant container over a period of time. IMPORTANT: Cut a small washer out of craft foam to help seal the…

Pobrania
881
Polubienia
73
Ocena
5
P
PrintablesMeister Edel

Stirring rod/ mixer for paint & epoxy support free (fully printable & wood)

Heyho I wanted to mix a few samples with different colours or additives with epoxy resin and was looking for small mixing sticks. Unfortunately I haven't found anything really suitable in size. So I constructed a mixing stick myself. It…

Pobrania
874
Polubienia
184
Ocena
5
P
Printablesueda

Irrigation pipe to garden hose system adapter

16 mm irrigation pipe to gardena / garden hose adapter that screws onto ¾" threads. Needs a rubber seal and O-Ring that can be found in my other models or bought from your local hardware store. Might need a pipe clamp on the irrigation…

Pobrania
823
Polubienia
191
Ocena
5
P
PrintablesJoe's wood'n 3D

Spare peg for garden irrigation - e.g. Gardena pipe compatible

Do you know this problem? Seems like mother earth swallows the pipe pegs of your garden irrigation system? Or they simply break after some time? Here's the solution! These pegs fit standard micro drip irrigation systems such as Gardena or…

Pobrania
710
Polubienia
159
Ocena
5
P
PrintablesAinon3Dtisk

Claymore irrigation mine for gardeners

Hello, I have a claymore watering mine for gardeners. Fantastic model for watering plants. Just pour water inside and it will gradually hydrate your bouquet or plant! I used PLA/PETG Basic as the material yes need to use supports If you…

Pobrania
626
Polubienia
365
Ocena
5
P
PrintablesNelisW

Drip/micro-spray irrigation splitter with Gardena connector

Drip/micro-spray splitter connecting to Gardena hose pipe. The requirement was to water bonsai trees, using micro-spray heads on flexible pipes, from a ten-way splitter connected to a hosepipe with Gardena fittings. The final design does…

Pobrania
580
Polubienia
107
Ocena
5
P
PrintablesJack

PET-Bottle Irrigation Spike

Vase prints with 18.2mm bottom for thread. If collar lip of the bottle doesn't seal with rim (water running out the tip because air can enter the bottle at the thread) - use some PTFE seal tape, or Vaseline.

Pobrania
565
Polubienia
63
Ocena
5
P
Printablesueda

Irrigation pipe T connector

This is for 16mm irrigation pipes. Needs a fair amount of force to fully press the pipe on, might also require a clamp to fix the pipe in place depending on your water pressure. It is also compatible with most common garden hoses, you…

Pobrania
564
Polubienia
80
Ocena
3,67
P
Printablesueda

Irrigation pipe to garden hose adapter screw

16 mm irrigation pipe to gardena / garden hose adapter that screws in ¾" threads. Needs a rubber seal that can be found in my other models or bought from your local hardware store. Might need a pipe clamp on the irrigation pipe end…

Pobrania
551
Polubienia
95
Ocena
5
P
PrintablesDusanJ

Adjustable dripping irrigation set

I designed components for my greenhouse irrigation system. It fits regular 1/2" (13 mm) hose and 4.6 mm hose (tested on Gardena irrigation 4.6 mm hose). Dripper endpoints are adjustable so them allow to set the desired amount of water for…

Pobrania
531
Polubienia
121
Ocena
5
P
PrintablesmuJoseph

Micro Drip Irrigation Kit Hose Clamp Stakes

Tips Use a zip tie through the hole to further secure the tubing within the clamp (optional). Print with PETG for best performance in outdoor applications.

Pobrania
522
Polubienia
61
Ocena
5
P
PrintablesBITaMinD R+D

RIEGGÅ - Parametric drip irrigation hose adapter

Parametrizable adapters for low pressure hoses for a hurry. The central part is to use one spanner, it rounds to millimeters. For other sizes, just change the values of the parameters hoseDiameter in the spreadsheet for your needs There…

Pobrania
519
Polubienia
117
Ocena
0
P
PrintablesBlutaxt Malta

Plant Pot Water Irrigator

A gravity irrigation system for your plant pots. Easy to use! After installing it into your plant pot and partially covering the ring with soil, just add water and let gravity do the rest as your plant will have water provided all around…

Pobrania
491
Polubienia
225
Ocena
4,5
P
PrintablesSkreelink

Resin Vat Stirring

I don't always empty my resin vats, nor do I use them within 48 or so hours so the resin separates in the tank. I noticed the gray I have is particularly bad, it can want to settle out by the end of a long print. It sat for about 3 days…

Pobrania
472
Polubienia
69
Ocena
5
P
Printablesfuchsr

Takenoko Tile Holders and Irrigation Channels

I saw geodesign's grid and canals for Takenoko and really liked the models (maybe because just the day before we'd managed to accidentally knock over our elaborate tile layout ☹). However, I really wanted single tile holders, not triples.…

Pobrania
432
Polubienia
56
Ocena
5
P
PrintablesDazza

King Theoden Helmet LOTR Rohan Rohirrim Lord of the Rings

A mock up of King Theoden's helmet from the Lord of the Rings. Now you too can defend Helm's Deep. (Not to be used in actual combat)

Pobrania
421
Polubienia
103
Ocena
0
P
Printablesmartyx

Watering (irrigation) system 20-way splitter

20-way splitter for DIY home automated irrigation system Designed for: 1x input hose 8mm (inner diameter) 20x output hoses 4mm (inner diameter)

Pobrania
420
Polubienia
157
Ocena
0
P
Printablesueda

Irrigation pipe connector

This is for 16mm irrigation pipes. Needs a fair amount of force to fully press the pipe on, might also require a clamp to fix the pipe in place depending on your water pressure. It is also compatible with most common garden hoses, you…

Pobrania
405
Polubienia
65
Ocena
5
P
PrintablesAnivia

190mm drip irrigation ring / halo

Remix of https://www.printables.com/de/model/103003-drip-irrigation-ring/ for bigger pots. Added additional peg holes for increased stability and to make leveling easier

Pobrania
387
Polubienia
46
Ocena
0
P
Printablesjscott1701

Drip irrigation Cross Fitting

Barbed drip irrigation fitting. Fits 1/2" poly Category: Outdoor & Garden

Pobrania
384
Polubienia
71
Ocena
0
P
Printableschristofferrap

Adjustable irrigation sprinklers for 4.6mm irrigation hose

Adjustable sprinklers for 4.6mm (3/16") hose. The flow through the sprinkler may be adjusted by twisting the cap. Multiple sprinklers may be places in series using the provided tee. The sprinklers uses a 2.4 x 18 (OD) mm O-rings to reduce…

Pobrania
364
Polubienia
72
Ocena
5
P
PrintablesTincan

Irrigation Drip Stakes

UPDATE: 6/3/26 added STL of longer version at user request (+ 50 mm, about 210 mm total) This model is a printable version of the rainbird style drip irrigation stake. The center hole is sized for floraflex ¼ drip line. The orange stake…

Pobrania
349
Polubienia
42
Ocena
5
P
Printablesueda

Irrigation pipe L connector

This is for 16mm irrigation pipes. Needs a fair amount of force to fully press the pipe on, might also require a clamp to fix the pipe in place depending on your water pressure. It is also compatible with most common garden hoses, you…

Pobrania
346
Polubienia
44
Ocena
5

Irrigraion halo dripper for plant wattering

This is dripper I designed for my hydroponics system. I use it with 10 cm (4 inch) rockwool cubes. External diameter is 7 cm. Printed in two parts: dripper and hose connector. Hose connector has to be glued to dripper. Holes has to be…

Pobrania
324
Polubienia
61
Ocena
5
P
Printableschris

Garden hose to 1/4" drip irrigation adapter

Garden hose to 1-4th drip irrigation adapter. adapter works but im having trouble getting it to seal Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament: Prusament PLA…

Pobrania
322
Polubienia
62
Ocena
5
P
PrintablesMace3D

Quirril: Hollow Knight Wall Art

I couldnt find any decent wall art of characters from the Hollow Knight game so I made some myself based on the game sprites.

Pobrania
322
Polubienia
56
Ocena
4
P
PrintablesMRLeach85

Garden Irrigation Watering Rings

*** Update *** I added internal baffling to the manifold to even out the distribution to the 10 outlets. I was using a soaker hose to water my garden, but I found it had a few shortcomings. I was watering areas between my plants that did…

Pobrania
316
Polubienia
123
Ocena
0
P
PrintablesKarel Schwarz

Irrigation peg / ground stake / hose tube holder 16mm

Another irrigation peg / ground stake / hose tube holder for 16mm diameter

Pobrania
309
Polubienia
30
Ocena
5
P
PrintablesTim

1/2"NPT x 3/16" Barb Fitting for Drip Irrigation

Made this to thread into 1/2" NPT fittings for drip irrigation.

Pobrania
289
Polubienia
41
Ocena
5
P
PrintablesUsman Suriono

Neti Pot , Nasal Irrigation with optimized tilt

The neti pot is tilted intentionally, that way the saline/water does not overflow out of the trunk (when you fill it) and allow lower trunk for optimal design. Designing neti pot involves the optimal way of less pot tilting and how much…

Pobrania
283
Polubienia
20
Ocena
5
P
Printablesemmgr23

Anti-Wear & Anti-Irritation Shoe Heel Guard

TPU Heel Protector I made this because the inside heel area of my sneakers always wore out too quickly. Once the fabric starts tearing, the harder material underneath starts rubbing against the back of the heel and becomes uncomfortable…

Pobrania
279
Polubienia
197
Ocena
5
P
PrintablesAlireza Ahmadi

Drip Irrigation Ring

The 3D model of the Drip Irrigation Ring is an advanced solution designed to improve water efficiency in gardening and farming. The ring measures 130mm by 115mm in diameter, ensuring it fits seamlessly around a variety of plant bases for…

Pobrania
273
Polubienia
31
Ocena
0
P
PrintablesIK3D

IRRIGATION PEGS / GROUND STAKES / HOSE TUBE HOLDER

Here a super easy, simple and fast printing peg for irrigation pipes. They print in about 15-20min each and work great, it has been designed to use with 13mm/0,51inch irrigation pipe, if you need different sizes just resize it to suit.

Pobrania
270
Polubienia
28
Ocena
0
P
Printableshmil

Micro irrigation end cap 4.6mm

End cap for 4.6mm drip irrigation line. Print instructions Works well in 0.2mm layer height. Doesn't need a brim. Use PETG if possible.

Pobrania
265
Polubienia
36
Ocena
5
P
PrintablesJamie B.

Irrigation Rotor Retainer Clip

A retainer clip used to temporary keep a sprinkler rotor in the "up" position, allowing the nozzle to be changed. Should work with all Hunter brand residential (¾" inlet) pop-up rotors (PGP, PGP Ultra, I-20 series). Might work with other…

Pobrania
260
Polubienia
13
Ocena
5
P
PrintablesBITaMinD R+D

TÅPPA - Parametric drip irrigation hose plug

Parametrizable Plug for low pressure hoses for a hurry. The rear part is to use one spanner, it rounds to millimeters, To print place it on top. For other sizes, just change the value of the parameter hoseDiameter in the spreadsheet for…

Pobrania
257
Polubienia
38
Ocena
5

Drip Irrigation Watering System

Drip irrigation is one of the most efficient water and nutrient delivery systems available. It delivers water and nutrients directly to the plant's root zone, in the right amounts and at the right time, so each plant gets exactly what it…

Pobrania
254
Polubienia
63
Ocena
5
P
PrintablesLuckyMenace

1/2 inch / 13mm Irrigation Tube End Plug

Barbed end plug for run of 13mm irrigation tube / pipe - insert past the barb to stop water flow. Ensure you flip the STL file if using this - otherwise import the 3MF as this is the correct way around.

Pobrania
253
Polubienia
34
Ocena
5
P
PrintablesPrintical

Geometric Cocktail Stirring Sticks

Print in different colors to use them as drink identification at parties! Use 0.3mm layer height

Pobrania
251
Polubienia
71
Ocena
5
P

Lord of the Rings Rohirrim Wall Sconce Light LED

This is a Lord of the Rings Rohirrim themed sconce light I designed to go below my United Cutlery LOTR swords. The lights are just LEDS and is designed to shine light upward at the swords. My youtube video shows the process of making it.

Pobrania
243
Polubienia
136
Ocena
0
P
Printablesid2Pat

Chainable drip irrigation system for water bottle

Device for supplying drip irrigation allowing to fill a set of bottles from any bottle of a circuit. Allows implantation away from the root system of plants and offers watering without going through the middle of the plantations…

Pobrania
240
Polubienia
90
Ocena
4,5
P
PrintablesBuggi

Parts for Greenhouse / Garden irrigation

I made some Parts like hose holders and T-Fittings / T-Reductions for 16mm (1/2'') to 4-5mm hose. Was fun to construct in Freecad and helps me a lot with my greenthumb hobby. Print instructions no supports needed If it does not get…

Pobrania
232
Polubienia
54
Ocena
5
P
PrintablesCropse

Drip Irrigation Ring smaller

Smaller ring for smaller pot

Pobrania
230
Polubienia
23
Ocena
5
P
PrintablesJDePriest89

Irrigation Drip Line End Plug

This 1/4" irrigation drip dummy plug STL file allows you to 3D print a durable plug for your drip irrigation system. Designed to seal 1/4" tubing ends, it prevents water leakage and improves system efficiency. Easy to install after…

Pobrania
228
Polubienia
18
Ocena
0
P
PrintablesMeady

Micro Irrigation Manifold

Multi port manifold for Micro plant irrigation system. It uses a standard Gardena/hozelock adapter on the garden hose. I have included a 4 port fused manifold. All port are active all the time the water is turned on. This model requires a…

Pobrania
227
Polubienia
56
Ocena
5
P
PrintablesTmpx64

Easy to print Plant watering globe / Water dripper / self-watering insert / irrigator

Keep your houseplants irrigated while you are away. Designed for simplicity and reliability, this model provides a steady water supply to your plants without complicated systems or expensive equipment. Simply fill it with water, insert it…

Pobrania
226
Polubienia
32
Ocena
5
P
PrintablesJLS

Just another drip irrigation tube stake

I print them in PETG, for a better resistance. If you use it in a dry/hard soil it might brake.

Pobrania
222
Polubienia
30
Ocena
5
P
PrintablesDebolestis

1/2 and 3/16 drip irrigation holders for drip hoses

These are the holders for ½" (13mm) and 3/16" (4,6 mm) Gardena and similar drip hoses. Soaker hoses fit as well. 5th Sep. 2023. Added a hook for 3/16 (4,6 mm) drip hoses, short and long variant. Long variant is as long as ½ version. Added…

Pobrania
218
Polubienia
34
Ocena
5
P
PrintablesNicerSlicer

Gardena Micro-Drip Irrigation 0.5 inch (15mm) clamp stake

Gardena Micro-Drip Irrigation 0.5 inch (15mm) clamp stake

Pobrania
205
Polubienia
25
Ocena
5
P
Printablesreallifeonhold

Irrigation Hose and Drip Line Clips

Easy-to-use irrigation clips for securing .700" (OD) and .250" (OD) drip irrigation lines. Simply attach the clip to the line and press into soil to secure. Note: clips are sized to nominal dimensions, you may need to scale up or down…

Pobrania
205
Polubienia
59
Ocena
4
P
PrintablesA2S_dESIGN

16 mm IRRIGATION PIPE CLAMP

We present an ingenious and practical solution for irrigation systems: a 16 mm pipe clamp specifically designed to be manufactured in a single piece using 3D printing. It incorporates an efficient toothed locking system. This allows the…

Pobrania
204
Polubienia
37
Ocena
5
P

Drip irrigation connectors. Strong and functional

Helping to my friend with dripping system, deside how to fix pipes in the place, just in case more water preasure. Connectors for drip irrigation system/pypes. For sure you can scale as needed. Like my work? 🔔 Follow my profile to get…

Pobrania
204
Polubienia
60
Ocena
5
P
Printablesoriddlero

Popsicle Stick to Drill Mixing Adapter for Epoxy & Resin - Cheap & Disposable Automatic Stirring!

Last night I was stirring ~500ML of epoxy with a popsicle stick… Suffice to say it was not fun at all… 20 minutes later this adapter was born. This simple adapter allows you to use popsicle sticks with your drill. Sure, there are lots of…

Pobrania
204
Polubienia
79
Ocena
4,5
P
Printablesfirstgizmo

Plant watering irrigation stick

Just choose a type and print it as you desire. The hose is hold down by simply routing it through the holder The _Long version is intended to be used in gardens. The shorter version however is great for plants in pots and planters

Pobrania
201
Polubienia
58
Ocena
5
P
PrintablesErudo

Mixing / Stirring propeller - Míchací vrtule

Míchací vrtule k uchycení na závítovou tyč s lůžkem pro matici M6. Stirring propeller to be attached to a threaded rod with a seat for an M6 nut.

Pobrania
198
Polubienia
23
Ocena
5
P
PrintablesRaQic

Hook - Gardena watering/irrigation system

Hook for automatic Gardena watering/irrigation system.

Pobrania
198
Polubienia
59
Ocena
4,67
P
Printablesschlick7

Irrigation Emitter Cap

I wanted to reduce the flow that my cheap 8way emitters were putting out. I bought a cheap 50pack knock off version of rain bird emitters (example in pictures). I have too many in the garden now though and can't get enough pressure so I…

Pobrania
187
Polubienia
40
Ocena
5
P
Printablescfeldhaus

6mm / 0.25inch Garden Irrigation Pipe Kink End Cap

If used outdoors print with UV resistant filament, such as Prusament ASA.

Pobrania
181
Polubienia
44
Ocena
5
P
Printablesmuddymaker

Coke Bottle Plant Irrigation Cap

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Recycle and reuse those pesky plastic coke bottles for…

Pobrania
180
Polubienia
24
Ocena
5
P
Printablesppaukstelis

Adjustable sprinkler nozzle for drip irrigation tubing

This is a simple sprinkler head that fits into 1/4" drip irrigation tubing. It is distance adjustable using a 4-40 (or similar size) screw threaded through one of the holes in the top of the deflector piece. Printed in ABS, as this will…

Pobrania
171
Polubienia
26
Ocena
0
P
Printablesfns720

Irrigation connector

This is a simple connector designed to a friend of mine to connect a 1/2" BSP thread on a magnetic valve with 1/2" plastic dripping tubes.

Pobrania
169
Polubienia
29
Ocena
0
P
PrintablesMy 3D Prints

3.8" to 4mm adapter for Micro Irrigation Water Pipe Tube

Converts 3.8" to 4mm measures for using Micro Irrigation Water Pipe Tube

Pobrania
168
Polubienia
24
Ocena
0
P
PrintablesShakataGaNai

Drip Irrigation clip for GreenStalk Vertical Planter adapter

This is designed for use with the GreenStalk Original Vertical Planter . It slips over the rim of the top water reservoir tier, fairly snug if printed in PLA. The ¼ inch drip irrigation tubing then slots into the top, with a little bit of…

Pobrania
166
Polubienia
33
Ocena
0
P
Printablesueda

Irrigation Pegs 16mm

Adaption of the original 13mm irrigation pegs from IK3Digital to 16mm pipes. I essentially redrew the shape and remodeled the curve at the top to be the same, just for 16mm as I did not want to just scale the whole thing up and waste…

Pobrania
166
Polubienia
20
Ocena
5
P
Printablesgskollnau

Propeller with stick for stirring paints such as acrylic paint

2 different propellers, clockwise and counterclockwise. First glue the propeller to the stick. Stick is made for cordless screwdrivers with 7 mm drill chuck. Rotation propeller has a diameter of 50 mm, so the edge and the inside of the…

Pobrania
165
Polubienia
14
Ocena
0
P
PrintablesJay

Garden Irrigation Spray System / Garten Bewässerung System (remix)

This is a remix of the great Spray System by schiffer-soft. I have change the output-nozzle and delete some parts to print it easier. 90, 180, 360 degrees are available. The other parts like midsection and groundholder you can find in the…

Pobrania
165
Polubienia
34
Ocena
0
P
Printablesyancha

Milk bottle plant irrigation adapter

This is a screw cap I designed to convert old milk bottles into self-watering bottles for plants. Just screw it onto a milk bottle, fill it with water, and stick it into the soil — it releases water gradually, so you can go on vacation or…

Pobrania
164
Polubienia
55
Ocena
5
P
PrintablesDBert

Growbox Irrigation Funnel

Hello, I have created this funnel to water the plants inside my grow tent. Often, I don't have direct access to the plant pots, and watering them is challenging even with the help of a watering can. So, I use a simple funnel and a rubber…

Pobrania
163
Polubienia
64
Ocena
0
P
Printableslayer.works

Paint/Fluid Stirring Stick

Needed a stick to stir some spar varnish with, but didn't have anything handy: made one. For use with a quart sized container (approx 1L). Scale as you please… Print instructions Download. Slice. Print. Summary Print. Stir. How I Designed…

Pobrania
162
Polubienia
31
Ocena
5
P
Printablesmarek

reduction 1/2 to 1/4 -drip irrigation

reduction 1/2 to 1/4 -drip irrigation

Pobrania
162
Polubienia
31
Ocena
0
P
PrintablesIsomorf 3d

3/4 inch PVC coupler with 2 liter soda fitting for irrigation

Uploaded V2 - better tolerances all around, and significantly shortened the overall length to cut down on plastic A ¾" schedule 40 PVC pipe-coupling that adds a 2 liter soda-bottle (standard US-threads). I created this as a cheap way to…

Pobrania
155
Polubienia
36
Ocena
0
P
PrintablesFerment3d

1/2" Drip Irrigation Tube Anchor Screw Mount

Mount your 1/2 irrigation tubing to wood. Originally made for Rain Bird T63-100 1/2" Drip Irrigation Tubing. Mounts with 1 screw. Original tubing this was designed for has a 0.634" OD, hole for screw is 4.75mm (I know, mixing units)

Pobrania
153
Polubienia
20
Ocena
5
P
Printablesmethylene67

Micro drip irrigation support for ø4 mm irrigation hose

No supports, use ASA or PETG material.

Pobrania
150
Polubienia
31
Ocena
5
P
PrintablesNikoFly

Plants perfusion - perfusion à végétaux - irrigation sprinkler

Friends gardeners, farmers and makers, I am happy to share with you my concept of plant perfusion !! You can now go on weekends or holidays with peace of mind, your harvest is protected. I designed this adjustable gravity drip sprinkler…

Pobrania
147
Polubienia
39
Ocena
0
P
PrintablesUglylittlebush

Simple Reliable Garden Sprayer | 1/4" Irrigation Stake Design

Howdy guys and gals! I wasn’t quite satisfied with the garden sprayers I could find in the store, so I made my own! It has an integrated stake and features 8 small streams that spread to a little more than a 12" diameter. It puts out a…

Pobrania
145
Polubienia
41
Ocena
4
P
PrintablesFergy7

"C" shape Irrigation Ring

Best printed at higher resolution - say .16 or even .10. Use PLA is application is indoors.

Pobrania
142
Polubienia
17
Ocena
0
P
Printableshakmo

Vego Garden Drip Irrigation Mounts

A set of models to make attaching drip irrigation to your Vego Garden raised beds easier. Currently just a clamp to allow mounting of ½" tubing in a horizontal orientation, but I will be adding more as I build out our irrigation system.…

Pobrania
141
Polubienia
37
Ocena
5
P
Printablesltlowe

Orbit Irrigation Sprinkler Protectors

Irrigation Sprinkler Protectors for Orbit Saturn-III and Voyager-II gear drive sprinkler heads. My models are inspired by @jimerb_132206 Grass Protection Ring but designed from scratch to completely cover the head except for the riser.…

Pobrania
140
Polubienia
29
Ocena
0
P
PrintablesFergy7

C-irrigation ring - larger version

My earlier 96mm version was designed for 4mm ID tubing. Whereas this one requires 5mm ID tubing the nipple/ring joint can see more stress in handling and in final placement. Therefore more care/means might be required to stress relieve…

Pobrania
139
Polubienia
29
Ocena
0
P
PrintablesDazza

Warrior of Rohan Rohirrim Palace Guard LOTR

To protect the Golden Hall of Meduseld

Pobrania
138
Polubienia
17
Ocena
0
P
PrintablesOlivier-Saraja

Piquet de maintien tuyau 6 mm goutte à goutte - Drip irrigation stake for 6 mm drip hoses

[FR] Piquet de maintien à imprimer à plat. Supports avec le plateau nécessaires. Pour tuyaux arrosage goutte à goutte de diamètre. 6 mm. [EN] Holding stake to be printed flat. Supports with heating bed required. For 6 mm diameter drip…

Pobrania
138
Polubienia
7
Ocena
0
P
PrintablesMino

Sprinkler irrigation system Nozzle variable spray sizes for 4mm ID Tube 1/4inch

I did not find any cool and working designs so i made my own. The Model is designed for 1/4 inch or 4mm inner diameter Tube. I uploaded some spayer sizes but the Fusion file is attached. Printed in ABS+ but any other Material should work…

Pobrania
138
Polubienia
15
Ocena
0
P
Printablesmethylene67

Distribution tubing holder for micro drip irrigation

Will have to use supports, use ASA or PETG material.

Pobrania
136
Polubienia
18
Ocena
5
P
PrintablesChris

1 input 5 output watering manifold for drip irrigation; 1/4" input 5/32" outputs

1 input 5 output watering manifold for drip irrigation; 1/4" input 5/32" outputs prints best with barbs facing toward the build plate (& can likely print without supports)

Pobrania
133
Polubienia
18
Ocena
0
P
Printablesmikeeg

Irrigation tube crimper

"Crimper" to fold 1/2" poly irrigation tubing to seal the end. Prints in 22 minutes! 3 g of filament at 30% infill, 4walls. Print with PETG for good outdoor quality.

Pobrania
130
Polubienia
28
Ocena
4,5
P
PrintablesMicromet

Servo Water Valve For Irrigation and Flow Control

This 3D-printed mount system allows you to automate an Antelco manual irrigation valve using a standard MG995 or MG996 servo . It’s an ideal low-cost solution for DIY and smart IoT irrigation projects. Great for a rain-barrel garden…

Pobrania
129
Polubienia
71
Ocena
0
P
Printableslamarqueza

Quick garden irrigation hose stake

This is a fast print irrigation hose stake , it is 10 cms tall and it is made for 16mm irrigation hose. It took me 13 minutes to print and 2 g of filament. To be printed in PETG due it is going to be outdoors and need to be strong enough.…

Pobrania
120
Polubienia
11
Ocena
5
P
PrintablesMini Tokio

Irrigation hose stake

Ground stakes for a 15mm irrigation hose.

Pobrania
120
Polubienia
17
Ocena
5