649 modeli
Inspired by the 2.5" version: https://www.printables.com/de/model/212758-25-inch-hddssd-caddy-for-multiple-drives I designed a similar one for 3.5" drives.
Wydruk około 3,65 €–4,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Isolation Bearing floats to keep Z axis supported but does not translate vibrations to motion path. You can watch and see the movement of the drive screw as the Z is travelled. Bearings cost about $1.05 ea Traxxas 5118 8x16x5mm…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. The throwing knife has…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
A simple and practical brick line holder that stays in place using the tension of the brick line itself — no screws, nails, or adhesives required.Perfect for masons, DIYers, or anyone needing to stretch a straight line when working with…
Wydruk około 1,09 €–1,34 € nettoWstępna wycena jednego wariantu
A quick and effective way to mount one hard drive on top of another, perfect for cases with a single HDD mounting slot. Compatible with Cooler Master's MasterBox NR200 and MasterBox NR200P as well as all Elite 501 and 301/2 Cooler Master…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
This is a vertical organizer for forks, knives and spoons, so you can store the cutlery on the cabinet door and free up, use it and abuse, just keep your kitchen clean a a safe space, your wife will apreciate it!!!! There are two…
Wydruk około 3,24 €–3,97 € nettoWstępna wycena jednego wariantu
See my other Prusa design inspired accessories here: https://www.printables.com/social/772-ateldsign/collections/311309 NEW: Version 2 Complete re-design for this V2. The clip holds firmly to the frame, is easy to use one-handedly and…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
Upload of my model created in October 2024. It was printed on a Prusa Mk3S+ and since printed on a Prusa Mk4S. All I have done here is take the excellent Rack for External Toshiba HDD Drive by @dronestationpro and modified it to fit all…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A sturdy and space-efficient holder designed for 3.5" hard drives , perfect for organizing and storing multiple drives safely. The holder supports 5 drives and is designed for the two most common 3.5" HDD thicknesses: 21 mm and 25 mm .…
Wydruk około 7,77 €–9,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Partie inférieure : remplissage 15 % sans support ni bordure - infill 15 % without support , without border. Partie sup : 15 % infill , with support : seuil de surplomb = 0, distance z du contact supérieur = 0,3, distance xy entre un…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
Attach the baseplate using simple 2-sided tape. The weight of the drives will keep it secure during normal use. Support: If you REALLY like this model and want to buy me a beer, you can find me here. Whether it’s feedback or just a nod of…
Overview OpenSCAD project to create a cage that fits in 3 5.25" drive bays and holds 4 3.5" hard drives using rails. Optionally supports a fan shroud to provide additional airflow to the drives. You need to print: 1 cage-cage.stl 8…
The TerraPi Xtreme DUO is an open Raspberry Pi NAS case, featuring two HDD 3.5" slots . A set of USB3 to SATA external power adapters are required to connect the drives to the Pi. You can buy those from your local market, to ensure that…
I wanted a holder for at least 12 USB drives with a few SD and MicroSD slots and it should be in a tall/vertical tower design. This holder has a small cavity for a 10g balancing weight (those lead weights with a self adhesive side for…
Armas personalizadas con el rostro de personajes de películas de terror Category: People
Driveshaft for 1/24 scale crawler axial SCX24 and Probably AX24. First pass so still a little rough but practical. Designed this so I could flip my motor/transmission around for more weight forward. Needed custom driveshaft lengths. I…
New version of the model 1.1, optimized for easier printing. Game from first episode: keys and knives Support is needed. You can print individual parts and then glue the entire model. I will add photos of the finished product as soon as…
3D Printable Caddies that you can use to adapt the 3 ½" storage bays of a 45Drives Storinator (AV15, Q30, S45 or XL60) or 45Drives Homelab HL15 server to accommodate a standard 2 ½" 7mm SSD or 2 ½" 15mm SSD. You'll want to use these M3 x…
Cover for Garmin LiveScope Plus LVS34 Transducer
Inspired by a model at thingiverse (https://www.thingiverse.com/thing:3544454) But needed something to be laser cut. Designed to enclose the drives, which is why the ends are not symmetrical. You will (obviously) need two identical parts…
Bonjour, Je vous propose des lettres mobiles Montessori avec la police de caractère Belle Allure de Jean Boyault https://www.jeanboyault.fr/belle-allure/ avec son autorisation et que je remercie pour son travail. Je l'ai fait à la demande…
New model of stand are ready! Check it out: https://www.printables.com/model/1810340-single-edc-knife-stand-12-different-models Hello everyone! This time, I am presenting a knife stand that you can show off. If you have knives in your…
Updated 5/17/2025 While I like the simplicity of printing without supports, one of my friends could not get used to angling the tee when putting it into the ground so it ends up straight once at the proper height. I added an updated model…
Manipulatives representing different angles that can be used to measure, compare and combine angles. For primary school.
Little update : new version of spacers with proper dimensions - previous version was too long, my bad. Has your EDC knife collection grown? Are you running out of space on your shelf? That's why I've designed a simple tower-style stand…
A simple remodel, I did not take my time, but I spaced it out a bit to support 5 3.5" drives instead of 4 like the original model. I have computers that use the IcyDock FatCage, which supports 5 3.5" drives. I found this model when…
Modified version of the original model that is now stackable
A set of knives inspired by Metro 2033 series suitable for LARP games. Print instructions Print all knives with black flexible filament, Flexfill 98a is a good choice. However, if you have softer filament, try to use it instead. You need…
Modifying my computer for use as a server required installing more hard drives. The original case frame had space for only two drives. Thanks to these frames, multiple drives can be mounted. The assembly set includes one base and two…
As part of a project I undertook to DIY (design-it-yourself) a modular EggBot-style robot from scratch using some parts I had on hand, I decided to use T-slot 8020-style profile as my base to allow for adjustments. Two issues were…
2x1 size gridfinity bin with cutouts for M.2 drives up to size 2280. Height is 3 units
This is (I guess) my fourth take on this crucial part… This time I wanted to improve the clearance within the suspension assembly and improve working parameters (namely the maximum angles before it locks). I also wanted the sliding to…
This is the famous clone trooper Fives! i will make a Arc trooper variant eventually.
I have had trouble with the original dogbones and joints binding on the Cramer RC Truggy when the suspension was extended and during sharp turns, resulting in cogging and snapped wheel joints / dogbones. This is a remix of the excellent…
a JIG inspired from the already not available JIG SV 45 from Tormek, as they replaced it by the new KJ-45 JIG, proposing a better centering of the knife and as a consequence a symetric angle of sharpening for both sides. However, offering…
This is a 3D Printable SSD mounting bracket that is compatible with 45Drives Storinator servers (except those which feature boot drive backplanes). This was shown off in Techno Tim's video here: This is compatible with the 45Drives HL15…
Belgian water hydrant for steam locomotives. scale 1:87 for H0 This is what I believe to be the Majolini version, likely often modified to have the valve at the base of the hydrant. Dimensions come from an old book “Manuel du piqueur des…
A set of manipulatives to help students learn ionic bonding. My friend, a chemistry teacher, wanted some manipulatives to help teach ionic compounds to her students. I found the original model on thingiverse and added some additional…
This is my version of the Grav Charges used by the Mandalorian in the TV series The Mandalorian. Here's my printing and painting video for this, https://youtu.be/88RAbjf0Fa8 . You may need to fill the dome with some bondo or spackle if…
This is a hot-swap drive cage, I designed it to hold 4x 2.5 inch drives, each up to 15mm thick. I made this for my old 2u server I emptied out, which doesn't have its own 5.25 slots. However, I sized it to fit in a 5.25 bay so it could be…
This is a open frame chassis for Raspberry Pi 4 with 2x 2.5" HDDs/SSDs. You can mount drives with a height of 15 mm. The holes in the Raspberry have a diameter of 2,7mm. Therefore i drilled them to 3mm. BOM: 4x 20mm M3 screw (pi mount) 4x…
I used PETG for printing. No support required. The cage holds up to 8 SSD disc drives and will use only one mount place. It was developed for Lian Li A3, but might be used with other computer cases. To mount, I used M3 X 16mm hexagon…
Here's a purpose-designed bracket to interface with the spring-loaded optical drive pins to add hard drives with some cooling. The other designs were very restrictive and I didn't even try them for fear that the drives would overheat.…
As I had from time to time problems working with hollow made forms out of the Gallery, I prepared me some hollows that I can upload to the gallery. I hope you will find them as helpful as I.
reduced the size of the posts to 4 spaces
This is a work in progress for sure (meaning it should be updated multiple times over the week of 10-03-24), and the blend files are going to be included in case anyone wants the original files to modify. They were brought into…
Here are all of the 3D Printed parts that come stock on the 45Drives HL15 server. If you need spares, or want to print your own, go to town. We recommend using PETG with at least 20% infill for these parts. PLA will likely soften at…
Each model features dynamic poses, tactical armor, and detailed equipment, designed for 32mm tabletop wargaming and display. All miniatures are optimized for resin printing with clean detail and minimal supports required. Perfect for…
Designed in Solid Edge and printed on (somewhat modded) Ender 3 V2 with PrimaSelect PLA Pro filament (10-20% infill, but I usually print with 6+ outer walls because I really like sturdy prints).
The Holder for kitchen utensils and knives consist of two parts. They must not be glued together, as this will make cleaning difficult. It was designed for a Bürster Premio Life caravan, but has been redesigned for more general use.
This is designed to be a 1u enclosure for a Raspberry Pi 3/3B+/4 and two 2.5' HDD's or SSD's. For more info, please check out my blog post about this project .
A remix of cudderbup's design over on Thingiverse. I've uploaded different versions / heights to find the best focus for you scanner. I'm using the 0.6 mm Version with ANR glass on top of the negatives. To use it without the ANR glass, a…
Dummy 13 Knives extended blade and resized to 250%
Dummy 13 Weapon Pack This weapon pack was designed for Dummy 13 and includes a variety of accessories for different character builds and display poses. Included: • Trident • Longsword • Large Knife (need supports) • Small Knife (need…
The is the new driveshaft that will be used in my RC Car V2, five times ! It drives the wheels (that's 4) and is also used for the front transmission. The overall length is ca 60 mm and it is still a double universal telescopic joint.…
Remix to accept a 9mm drive. Category: Computer
Objective markers, objective zones, and a carrying solution for them to travel. The carrying case is built to stack, so that tournament organizers can travel with multiple sets. The HolderBase is a few millimeters taller than it needs to…
It is a pistol from the game Team Fortress 2
Don’t have a resin printer? You may buy the model at N'Tastic Scale Models: https://www.ntastic-scale-models.co.uk/shop/under-licence-range-slanjonok-range/WLZIUUC3AWPRTNDKJOPXNJVZ ---- The Thornycroft JJ-type is a 5/6-ton lorry with long…
Backups are important but if you're like me, they often get forgotten about. This enclosure lets you easily package 2 x 5tb drives to and a Raspberry Pi for file storage. For more info about this project, please have a look at my blog…
Just some custom-made objective pieces for Battletech. If you like my work and want to see (and print) more of it, please consider stopping over at my online miniatures store at Punkin' Figs . All of my 3D printable releases are printed…
Print 2 uprights per drive. The center supports are optional but do help with stability. These were made specifically with the Seagate Backup+ Hub 8tb drives they sell at Costco all the time. They print support free in the orientation you…
Don't forget to like, and to donate if you really enjoy the file. :) Plastic toy knives for food practice or clay/Playdoh. Pictured knives are printed at 75% scale. For play or training with soft foods or clays like Playdoh. Use under…
3D MODEL DESCRIPTION Easy to print and add Halloween decor to your house scale up or down (no less then 50%) for multiple uses and ensure you keep a minimum of 3mm in thickness -Use the .3mf file to customize the colors (Sorry only…
Keep the crew cool with a rooftop Prime Style Air Condition Unit. Also included a version for fitting over the existing poorly detailed thing on the AML GP60 model (Picture shows Aristo-Craft SD45.) NOTE: I PUT MUCH TIME AND EFFORT INTO…
After the V6, the V8 is here! Engine style desk organizer / phone holder for car enthusiast. You could scale is you want, if you print it in the original size it fill fits for most phones, like 14 Pro (with UAG case) in the pics. The…
Einfacher Ständer für externe USB Festplatten. Unten am Boden kann man kleine Plättchen aus Gummi oder Filz anbringen. Für eine maximale Festplattengröße von 110 mm Länge und 22mm Dicke. Versionen, für 4, 5 oder 6 Festplatten. Gedruckt…
it will fit right inside the top of that clear bin im planning on filling up with other knives.(see picture) thats why i made it this particular size. let cool before debedding to keep flat Super glue the joints. tape in place to dry. bin…
Nobody uses optical disk drives anymore, put all your old 3.5" drives in the 5.25" bays. The slider is made as a clone of the one in the images. Print instructions Use the screws indicated on the pictures for attaching the extender pieces…
I made these frames for inserting into custom-made dice I designed to mimic the aesthetic of stained glass in resin dice. I use a two-casting method, inserting the frames into the smaller core mold, then adding color to the faces, before…
Took original 2x 2.5" drive design and made it for just one 2.5" drive. Also cut out about half of material used by modifying length and cut outs in bottom. Also redesigned clips so that supports are not needed. Only works with 7mm thick…
Holder for 2.5 SSD HDD storage. Fits 5 drives of 7mm and 9.5 mm thickness.
A replacement for mounting SSD drives in PC cases. It can hold up to 5 SSD drives. The design also includes holes for at
This is a remox for slightly longer drives, 182mm. Resized it to fit my Pioneer BD-R S08 Blu-Ray recorder.
Good quality throwing knives mainly for adults. Please leave reports and problem so we can all help each other out, Than
I printed it in Nylon (Taulmann 645) and it works pretty well.
Simple organizer for storing pocket knives and other EDC items. STLs provided for versions with 3, 5, or 7 slots, or a 7-slot STEP available for remixing. Note that this is for small to medium sized knives, you may need to scale this up…
Keep the crew cool with a rooftop Dayton Phoenix Style Air Condition Unit. Added a version for fitting over the existing poorly detailed thing on the AML GP60 model. lol (Picture shows Aristo-Craft SD45.) NOTE: I PUT MUCH TIME AND EFFORT…
A friend that is a beekeeper asked for a honeycomb to test his hives.
similar design to popular socket holders. I suggest printing the pegs in a brighter color of filament than the base. I painted mine but plan to reprint dual color soon I used 15% infill, 3 outer layers printed at .2 height on a prusa mini…
case to transform your old 3.5" drives into an external USB drive
Usb holder for 30 pendrives, 12 sdcard and 10 microsd and a tray. Most of my drives were too wide to fit drives into both rows of USB slots. Added some extra space between the rows. USB slots come out to tight on my printer so I scale it…
This enclosure works great for a NAS with no fan. Pi 4 runs in it all day long with no heat issues. Print instructions Print at .3mm with whatever infill you feel is necessary. Print box laying on Pi end. Print lid laying on smaller flat…
Grey's Anatomy "It's a beautiful day to save lives"- Derek Sheperd
Please comment, rate, and post a make! I ran out of physical space to add more hard drives to my home server. Given that I already had a few parts laying around, I didn't want to spend several hundred dollars on a prebuilt enclosure. So,…
This Durian model was made by Revopoint POP in Live Stream on 25, Jun 2021. If you want to get more models like it, please try to use 3D scanner POP: https://bit.ly/3xb37c3 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
On the original basis, a 4010 fan is added to cool the CPU of the motherboard, and a 5015 fan (Voron model cooling fan) is used for driving heat dissipation. I designed an independent air duct above the drive, and the 5015 fan needs to be…
I needed a HDD/SSD holder to hold the max drives I could fill on the Prusa Mini print plate, so remixed this Fits 15mm drives
Changes I made it able to support a 10mm thick drive (instead of 7mm). I also added fillets and chamfers just to kind of polish it a bit. On my way toward doing a make of this nice design by Scott Gibb, I also created this remix. I used…
A trivial design - but it's pretty annoying if you don't have one of these. Should print just fine in almost any filament. A little dab of hot glue will hold it in place.
This is a set of four double hooks with animal motives for children. They are between 6 and 9 cm tall/wide and offer 2 holes each for screwing to a wall. You can see the dimensions at the last picture. I printed them in white PLA as is…
Kitchen Knives Holder 3 part design Total dimensions 480x165x70mm Holds 9 knives
Dummy 13 Knives extended blade and resized to 200%
For all you Blackmagic camera people out there (you know who you are). I present, the holy grail. If you're anything like me, you have an unreasonable number of these little Samsung SSD's floating around to fuel your little BMPCC…
I designed this model for myself to keep some EDC items organized and I figured I would share. This is the maximum size my Mini+ could print. It's 180x180mm. Wallet is a Herschel Charlie. Raycon E85, Leatherman Skeletool, Milwaukee 6-in-1…
I made this adaptors for slides and negatives for my Sigma Macro lens that has a filter thread of 55mm needs uniform light (I simply point to a white wall well illuminated and far enough to be out of focus) printed on PLA at 0.2 Created…
Stackable boxes/rack for WD elements external hard drive or similar drives. The stand holds everything at 15° angle for better airflow. Print with .3mm layer hight to save some time. Easy to permanently fix together with some glue.
I made this as a coin or medallion prop for a DnD campaign. Printed it in PLA Oh My Gold filament using a 0.25 mm nozzle and 0.1 mm layer height, but 0.4 nozzle should work fine too. I added the coin version and the gyro version aswell.…
Pyle-style ditch lights with different housing designs. I prefer the warm white 3mm flat lens LED's from EDGELEC. https://www.amazon.com/gp/product/B077XBVZ5Y NOTE: I PUT MUCH TIME AND EFFORT INTO DRAWING PARTS AND SHARE FILES FOR FELLOW…
Please comment, rate, and post a make! I ran out of physical space to add more hard drives to my home server. Given that I already had a few parts laying around, I didn't want to spend several hundred dollars on a prebuilt enclosure. So,…
