Wyniki wyszukiwania: jabra

Sortowanie

163 modeli

P
PrintablesSimone Rossetto

Reinforcement part for Jabra EVOLVE 40 Corded Headset

My Jabra EVOLVE 40 headset breaks on the right "arm", so I created this reinforcement part. It can be used both to reinforce an intact headset or to repair (making it usable) a broken one. To have more stability between the printed part…

Wydruk około 0,40 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
135
Polubienia
22
Ocena
0
P
PrintablesCrambambuli

Jabra evolve 65 joint fix

E_Tech 14 made an awesome jont fix. I took his design and made it even better.. now it can be printed much easier. The design is also optimized. update: both sides Remix of: https://www.thingiverse.com/thing:4724194

Pobrania
1268
Polubienia
72
Ocena
4,62
P
Printablesmcberry23

Jabra Evolve2 65 Charging Dock

A charging stand for the Jabra Evolve2 65 Headset Designed to hold the USB C cable that comes with the headset. No support material is necessary. Print in the upright orientation. This is a remix from @daRiddler Jabra Evolve2 65 Dock to…

Pobrania
795
Polubienia
42
Ocena
5
P
PrintablesDorvoG

Jabra Evolve 65 Headphone Hinge Repair

Printable fix for when the Jabra Evolve 65 snaps between the on ear element and the headband. Uses two M4x10 screws to clamp onto the headband and the on ear element slides into the holder. The printed material is thin enough to allow for…

Pobrania
575
Polubienia
14
Ocena
0
P
PrintablesTm

Stand for Jabra Evolve 75 Headset

A charging stand for Jabra Evolve 75 wireless headsets. Print settings Material: PETG Layer height: 0.20 mm No supports needed. Materials Anker Powerline Micro USB cable - A8133011 (Other cables probably will not fit) Self-Stick Rubber…

Pobrania
542
Polubienia
34
Ocena
5
P
Printablesguddl

Jabra Speak 510 stand

Lightweight stand for the Jabra Speak 510 Printed with 10% infill (and organic support) Pictures are from a testprint in draft mode. --- Leichter Ständer für das Jabra Speak 510 Gedruckt mit 10% Infill (und organischem Support) Die Bilder…

Pobrania
533
Polubienia
37
Ocena
5
P
PrintablesJan178

Jabra headset broken hinge fix

My wife's headset broke off from it's hinge, quite common issue with these. This print works by glueing it onto the speaker, the hinge stays when snapped in place. The speaker is still moving, all the buttons open to reach. I used PLA…

Pobrania
463
Polubienia
36
Ocena
5
P
PrintablesDajosco

Jabra Speaker 60deg Stand

A handy stand to set your Jabra speaker at 60deg on your desk. Improves sound directionality.

Pobrania
384
Polubienia
47
Ocena
4,57
P
PrintablesJohn

Stand for Jabra Speak 410 or 510

Prints fin standing with no support. I used 25% infill. I have not tested this with the Jabra Speak 510, but the dimensions are the same, so it should work. Please comment your results with the 510.

Pobrania
347
Polubienia
25
Ocena
5
P
Printablesegeltje

Jabra Speak 510 holder

A small holder for a Jabra Speak 510. My wife and I share an office and during conferences, the Jabra projects the sound straight up and around the room. This is distracting for the other. Now we can direct the sound to the person in a…

Pobrania
347
Polubienia
25
Ocena
4,8
P
PrintablesApitzalli

Jabra Evolve headset hook

This is a nomad hook for Jabra headset (Evolve 40 and others models). It screws on a desk, a table or a shelf up to 4cm thick. Ideal when you work on multiple desks. The control module clips in the built-in circle. Voici un crochet nomade…

Pobrania
297
Polubienia
31
Ocena
5
P
Printablesrubenzilzer

Repair ring for Jabra Earphones

Here in Sapir College - Israel we have a Call center equipped with some 20 stations with Jabra earphones It seems that these earphones (not cheap) have a serious flaw in design , 50% of the are already broken in the same place, they…

Pobrania
223
Polubienia
11
Ocena
0
P
Printables666dsa666

Jabra Evolve 65 Mono Repair Part

Repair part for broken Jabra Evolve 65 Mono

Pobrania
199
Polubienia
11
Ocena
5
P
Printablessternli27

Jabra Headset Wall Mount Headphone Storage Organizer

Jabra Headset Wall Mount Designed for 3.0x12mm screws Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Prusament ABS white Notes: surface smoothed with acetone vapor gives a…

Pobrania
193
Polubienia
14
Ocena
4,75
P
PrintablesMichael Schmidt

Jabra Evolve Under Desk Mount

Making working from home a bit nicer with less clutter on the desk. This mount allows to stick the headset's remote control under the desk. Print instructions Nothing special. Prints without supports or infills.

Pobrania
172
Polubienia
25
Ocena
5
P
PrintablesRagingFury

Jabra SPEAK2 55 desk stand

sung, minimalist stand for the Jabra Speak 55 LIKE if you like. thanks!

Pobrania
164
Polubienia
7
Ocena
0
P
PrintablesHawker

Jabra Evolve 65 Headset Dock Stand

The Jabra evolve 65 is a great headset but finding the micro USB cable all the time to charge it is a little annoying. I created this charging dock/cradle. I have included 3 versions: No boom cutout - you will need to fold up the boom…

Pobrania
149
Polubienia
7
Ocena
5
P
Printablessidlogic

Jabra Evolve2 65 Flex Qi-Charging Stand

Missing a proper stand for your Jabra Evolve2 65 Flex that you know and love from other Jabra headsets? This one comes close to that but utilizes a common Qi-Charging pad. The headset “slides” into position and ist perfectly aligned. How…

Pobrania
143
Polubienia
15
Ocena
5
P
PrintablesLucandia

Customizable Jabra Elite 7 Pro case cover

This is a cover for the Jabra Elite 7 Pro case (I imagine it would fit the 7 Active too). Easy print in two parts (top and bottom), then use Bi-adhesive tape to fix the case in place. I used thick bi-adhesive tape, so the cover could not…

Pobrania
140
Polubienia
22
Ocena
4
P
PrintablesJens Willmer

Jabra 510 Wall Mount

It has a tight fit due to the rubber of the Jabra base. The Jabra won't move. The model has two M3.5 screw wholes. Source file can be found at: OnShape Jabra 510 Wall Mount Print instructions Category: Audio Summary It has a tight fit due…

Pobrania
137
Polubienia
11
Ocena
5

Jabra Evolve 75 - charging dock - stand

Charging dock for the Jabra evolve 75. one version uses a magnetic charging cable from AliExpress ( 8mm diameter) to avoid potential damage to the micro USB port. the other version is for the original cable supplied with the headphones…

Pobrania
129
Polubienia
11
Ocena
5
P
PrintablesSamu Gruler

jabra headset repare

es ist die möglichkeit deien Jabra kopfhörer zu repariren

Pobrania
129
Polubienia
17
Ocena
5
P
Printablesquattro

Jabra Evolve2 65 Headphone holder for IKEA IVAR shelf

As I heard about the contest, I thought my other design (Webcam Cover) would fit perfectly into this category. unfortunately I had already published it shortly before the contest begun so I could not use it for the contest. Today I was…

Pobrania
129
Polubienia
29
Ocena
5
P
PrintablesNK6150

Ouško k handsfree Jabra Talk 25

Originální ouško moc dobře nedrželo a neustále se vycvakávalo z handsfree. Děkuji za případný like.

Pobrania
120
Polubienia
5
Ocena
5
P
PrintablesWim Hoogendoorn

Jabra Speaker stand

A stand for the Jabra speak 510 the speaker is at a 60-degree angle

Pobrania
119
Polubienia
13
Ocena
5
P
Printablesjeveli

Jabra Talk 45 Earhook

Jabra Talk 45 Earhook printed with PLA Print Settings Printer Brand: FlashForge Printer: Guider II Rafts: No Supports: No Resolution: 0.12 Infill: 100 Filament: PLA eSun Category: DIY

Pobrania
115
Polubienia
9
Ocena
5
P
PrintablesCY95

Home Assistant Wyoming Satellite with Jabra410 and RPI zero 2w

Wyoming Satellite based on Jabra 410 and Raspberry Pi Zero 2W This guide explains how to build a Wyoming satellite using a Jabra 410 speakerphone and a Raspberry Pi Zero 2W. Bill of Materials (BOM) Jabra 410 (Jabra 510 should be…

Pobrania
115
Polubienia
20
Ocena
5
P
PrintablesJekal

Craddle for Jabra Envolve2 75

It uses the USB-C cable delivered with the Headset for Charging.

Pobrania
108
Polubienia
9
Ocena
5
P
PrintablesGloim

Jabra Speak 510 Wall/Ceilingmount

Need your Jabra audio puck mounted on a wall or ceiling? Say no more, got you covered. Enjoy.

Pobrania
105
Polubienia
7
Ocena
0
P
PrintablesRam

Jabra Evolve 65 repair

Repair rings for Jabra Evolve 65. Does not allow rotation on the headphone.

Pobrania
103
Polubienia
8
Ocena
0
P
PrintablesJim The SOG

Jabra Speak 710 Holder

Holder to mount Jabra Speak 710 or similarly sized speaker to a camera mount. Hole is made for standard camera screw (¼"-20) that you will need to tap yourself. Please reach out if there's another mounting type (e.g. fit a camera shoe…

Pobrania
103
Polubienia
5
Ocena
0
P
PrintablesDeDJ

Jabra Evolve2 65 Charching Stand

Deutsch: Dieser Stand ist ein Remix des Ständers für das Jabra Evolve2 65 Headset mit mehreren Verbesserungen: Deutsch: Dieser Stand ist ein Remix des Ständers für das Jabra Evolve2 65 Headset mit mehreren Verbesserungen: • Optimierte…

Pobrania
102
Polubienia
9
Ocena
4
P
Printablesfreemanowe

Headphone holder for jabra

Headphone holder with place for jabra evolve30's control thingy. (Model w/o the plate attached too.) Holder's inner diameter is 55mm. For table thickness 9-29mm. Printed with Anycubic mega My used print directions are on the attached…

Pobrania
97
Polubienia
7
Ocena
4
P
Printablesice987

Jabra Evolve2 85 Deskstand

A deskstand for Jabra Evolve2 85 wireless headsets. Print settings Material: PLA or PETG Layer height: 0.20 mm Supports: Yes

Pobrania
96
Polubienia
7
Ocena
0
P

Jabra Speak 2 55 stand

Could not find one for the Jabra 2 55 here. Fits perfect.

Pobrania
96
Polubienia
3
Ocena
0
P
PrintablesStephen Bory

Jabra Evolve2 Heaphone Holder w/USB C Slot

Printed well with no supports. Remixed from: https://www.thingiverse.com/thing:4636844

Pobrania
95
Polubienia
8
Ocena
0
P
Printablesginoadriano

Jabra Evolve2 65 - Replacement Cushion - Earpads

I've had the Jabra Evolve2 65 Headset for over 3 years now. Because of daily use the earpads began to desintegrate to the point i had black pieces of the fake leathery fabric sticking to my face on a regular basis. Decided it could no…

Pobrania
92
Polubienia
8
Ocena
5
P
Printablesntdesign

Jabra Evolve 20/30 Headset holder

Simple holder for headset & remote. The remote slides in smoothly & stays removable. The holder is designed to be affixed with double-sided tape. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No…

Pobrania
92
Polubienia
14
Ocena
5
P
PrintablesFevon

Jabra talk 5, 25 se, 15 se repair hoop ear

Sometimes this part can break.

Pobrania
90
Polubienia
7
Ocena
5
P
Printablesrashuge

Jabra Speak2 40 Stand

This is an easy print. You can use draft even and it works out fine. There is a slot to route the cord behind as well so that you can have a pretty clean desk setup.

Pobrania
90
Polubienia
5
Ocena
5
P
PrintablesKlaus Krämer

Ohrbügel für / Earhook For Jabra Talk 45 / Jabra Stealth

Die Jabra Headsets Talk 45 und Stealth kommen mit einem ergonomisch schlecht konstruierten Ohrbügel, der mir nach kürzester Zeit Schmerzen verursacht hat. Darum habe ich mir mit TPU (Willowflex) Ersatzohrbügel gedruckt, die ich auch über…

Pobrania
89
Polubienia
9
Ocena
0
P
Printablesthe_robold

Jabra Speak holder

This model consists of two options to mount a jabra speak to either a desk or a 35mm pole (monitor stand). Other mounting options can easily be made to fit the main jabra holder. The assembly is done with two M3x10 bolts.

Pobrania
87
Polubienia
11
Ocena
0
P
PrintablesJayS

Headset holder Jabra Evolve 20 MS Stereo

Headset support for Jabra Evolve 20 MS Stereo and control button Additionally required M4 nut and M4 screw (at least 20mm length). I used a DIN316 wing bolt

Pobrania
84
Polubienia
12
Ocena
5
P
Printablesmomorientes

Jabra Evolve65 Cat Ears

Snug fit on the two-ear version, resize to -0.5% for the one-ear-version. Supports recommended but not required.

Pobrania
84
Polubienia
12
Ocena
5
P
PrintablesLuce

Jabra 510 Speaker Base

Speaker Base for the Jabra 510 speaker phone. Make sure the microphone is lined up with the bottom cutout. Top cutout is for the USB cord. Printed with fuzzy skin on the outside, lightning infill at 25%, black PLA.

Pobrania
82
Polubienia
4
Ocena
5
P
PrintablesArne H.

Holder for Jabra Evolve 40

There are 5 parts that need to be printed. The "holder" is pushed onto the "clip". Then the "screw" is screwed into the "clip". Finally, the "cap" is screwed onto the "screw" with an M3 countersunk screw (8-18mm long). Everything can be…

Pobrania
81
Polubienia
9
Ocena
5

Jabra Evolve 65 Adapter Holder

Adapter to Hold the USB Dongle for the Jabra Evolve 65 on the headset. The design is not really evolved and has some shortcomings. Its a 10 minute modeling to solve the "Where is the fr**king dongle again???"-Problem. So it could be…

Pobrania
81
Polubienia
7
Ocena
4,67
P
Printablestto

Jabra Speak 510 Wall Mount

Wall Mount for Jabra Speak 510 printed with PETG, 0.2 mm layer height and 4 perimeters. Approx. 2 hours printing time. My Jabra Speak 510 is simply plugged in.

Pobrania
81
Polubienia
10
Ocena
0
P
Printablesxrg

Jabra monaural headset pad

That's the pad for the “other” ear side on the Jabra Pro 94xx series, monaural headsets. It may fit any other such set, of course. As long as the metal band is about 4.5mm x 0.9mm cross section. Note that the design has a pocket inside…

Pobrania
80
Polubienia
3
Ocena
5
P
PrintablesTruTech

Jabra Over-Ear Adapters

Print without supports. i did .3 mm with 20% infill since these isn't a part you'll see once installed. You can print the top part twice or pair it with a bottom part to flare the earpads out a bit more, and have a more snug fit. I used…

Pobrania
75
Polubienia
13
Ocena
5
P
PrintablesThargor

Jabra Elite Gridfinity holder

A holder for Jabra Elite BT earbuds I designed for my Gridfinity charging station. Printed in Prusament Royal Blue PLA with .6 Nozzle. Gridfinity was designed by Zack Freedman.

Pobrania
74
Polubienia
6
Ocena
0
P
Printableshjembaek

Jabra Evolve 65e Buttonplate

Credit: Thanks to Lorenzo (@laurent.polese) from MakerWorld for sharing the original design. Modifications made to the original: Printed using a 0.25 mm nozzle for higher detail Buttons scaled to 92% on X and Y axes Buttons scaled to…

Pobrania
72
Polubienia
1
Ocena
0
P
PrintablesZeno

Jabra Talk 45 - pocket case

Case for Jabra Talk 45; I printed in PLA, cap has a good pressure fit on my normal settings. Made a small adjustment so you can also put the cap on the bottom edge when open. But you can also rotate it 90 degrees and snap it to the side.…

Pobrania
64
Polubienia
4
Ocena
0
P
Printablesulf3d

Jabra Link USB adapter storage box

Finally it's here! Store your Jabra Link USB adapter in this magnificent cylinder. Knurled surface for both esthetics and function so that the grip is secure when threading the parts together. A beautiful piece of art for your desk that…

Pobrania
63
Polubienia
20
Ocena
5
P
Printablespapierclipje

Jabra 510 Skadis mount

it's a tight fit. Could probably do with some cable management but this works for me. Printed with PLA and support on bed for the skadis hooks. If you want to mount it I would recommend to first unwind the cable, mount it and then rewind…

Pobrania
62
Polubienia
7
Ocena
5
P
PrintablesZotrax

Jabra Headset Wall Mount

19mm version is for Jabra Evolve 65 and 25mm is generic for other models. Use double-sided tape on non-screw version.

Pobrania
60
Polubienia
7
Ocena
0
P
Printablesnallsp

Jabra Speak holder

The original model was made for the Jabra Speak 510, but it also fits my Jabra Speak 2, although it's a bit tighter.

Pobrania
59
Polubienia
4
Ocena
0
P
PrintablesAlex

Headset Holder Jabra

Das ist ein Halter für mein Headset (Jabra Evolve 40 MS Duo). Er passt bestimmt auch für andere Modelle, solange die Bedieneinheit die selbe ist. Zur Befestigung sind 4 Löcher vorgesehen für Senkschrauben. ich habe 3,5x16mm verwendet.…

Pobrania
58
Polubienia
7
Ocena
0
P
PrintablesWayne

Jabra Panacast Camera Wall Mount

Simple wall mount for Jabra Panacast conference room camera. Design file included so that you can adjust length to suit your wall ←→ TV distance.

Pobrania
56
Polubienia
2
Ocena
0
P
PrintablesDeal101

Jabra Heatphone Stand for Lenovo L580 Laptop

Headphone holder for a Jabra headset for my Lenovo L580 laptop. The holder is attached to the right-hand corner of the laptop. Printed with a Prusa Mini+. Support should be activated.

Pobrania
53
Polubienia
8
Ocena
0
P
PrintablesDominik

Jabra Speak2 75 mount/lock

We're using these speakers in our meeting rooms in our office and to prevent theft, we decided to mount them to the table using double sided tape. This mount attaches to the cable loop and locks with a single M3x10-16 screw, so it cannot…

Pobrania
52
Polubienia
1
Ocena
0
P
PrintablesYusitron

Soporte cámara panacast Jabra / webcam

Soporte para cámara Panacast, Jabra, pero que sirve perfectamente para diferentes tipos de cámara web, pensado para atornillar a pared, debajo de la pantalla, a modo de sala de videoconferencia. Con la misma distancia de tornillos que la…

Pobrania
52
Polubienia
1
Ocena
0
P

Jabra Elite Active 75t case mount for Honeycomb Storage Wall

This honeycomb storage wall widget mounts your charging case, leaned gently towards you, ready to grab your headphones, and also provides a convenient window for your charging cord so you can leave the case in the wall when taking your…

Pobrania
51
Polubienia
14
Ocena
0
P
Printablesflow_241

Ikea Skadis Jabra Elite 75T

Designed a simple holder for the Jabra Elite 75T to fit the Ikea Skadis system. I chose the orientation on print bed the same as later installed. Support needed. Supported areas won't be visible after removal of the supports. If you want…

Pobrania
50
Polubienia
9
Ocena
4
P
PrintablesMoukloup

Jabra Elite 75t Keychain

Friction fit holder for bluetooth headphones

Pobrania
50
Polubienia
5
Ocena
0
P
PrintablesJohn Doe

Jabra Evolve 80 MS Stereo USB headband

The Jabra Evolve 80 is a very good headphone, but unfortunately its headband is defective from the factory. The material is not elastic enough, so it breaks after 1-2 years of use. I was sorry to throw it away, because otherwise it works…

Pobrania
48
Polubienia
3
Ocena
5
P
PrintablesCellerich

Rhasspy/Wyoming - Jabra Voice Assitant Satellite case

Ever wanted to get rid of Google Home or Alexa? With Rhasspy (soon integrated with HomeAssistant ) you can create your own "Voice Assistant" which runs in your own home without calling to outside servers to understand you. I'm about to…

Pobrania
47
Polubienia
9
Ocena
0
P
PrintablesPinalinne

Jabra elite 3 active honeycomb storage

A support for your Jabra elite 3 active.

Pobrania
47
Polubienia
9
Ocena
0
P
Printablesdoeni

Gridfinity 1x2 (height 5) Jabra Elite 65T holder (no holes)

Small 1x2 Holder for my Jabra Earpods No holes No Support 5% Infill (Cubic)

Pobrania
46
Polubienia
3
Ocena
5
P
PrintablesAlexey H

Jabra evolve 20 30 hsc016 desk holder

This is a lightweight Jabra Evolve 20 30 hsc016 headset desk holder for those who are mad about this piece jumping off the table 2 variants - one with a holder only from one side and a second with holders from both sides for better…

Pobrania
44
Polubienia
7
Ocena
0
P
PrintablesSam Schultz

Jabra Speaker Tube Mount

Looking to get my Jabra speaker off my desk but accessible easily. Couldn't find a mount I liked so I made this one that goes on my dual monitor stand. I used some threaded heat inserts and 3mm allen screws but If you made the holes a bit…

Pobrania
43
Polubienia
4
Ocena
0
P
PrintablesTed

Wall Mount for Jabra Elite Active 75t Earbuds

The cutout is the actual size of the case so scale down in your slicer so they don't fall through. I printed at 99.5% and I was satisfied with the fit. Holes are sized for #8 wood screws.

Pobrania
43
Polubienia
1
Ocena
4
P
PrintablesAriel Mirabelli

Jabra HSC040Wa Tischständer

Soporte de mesa para auriculares Jabra HSC040Wa Jabra HSC040Wa Tischständer für Headset

Pobrania
43
Polubienia
5
Ocena
4
P
PrintablesBubuss

Jabra Talk case

Pouzdro vzniklo kvůli neustálému sundavání náušníku a háčku v kapse, a nechtěnému vyhození z kapsy kapesníkem, nebo třeba klíčemi a následné ztrátě HF. Po dvou ztracených kusech už je klid :) Tisk: vrstva 0.2, infill 25%. Víčko jsem…

Pobrania
43
Polubienia
2
Ocena
5
P
PrintablesPostzegel

Jabra Evolve 75 docking station with wood texture

This is a remix of the jabra evolve 75 docking station made by BoTa from thingiverse. The wood texture was added with Blender, then printed with ColorFabb Woodfill. This choice of material not only lends an authentic wood-like appearance…

Pobrania
42
Polubienia
4
Ocena
0
P

Jabra Elite 65T TPU cover - "Hinge Fix"

This is a cover I designed for my Jabra Elite 65T after the original case's hinge broke. It keeps the top and bottom halves of the case connected and allows opening and closing just like the original hinge. It also has an opening for the…

Pobrania
40
Polubienia
7
Ocena
0
P
PrintablesEric Anastas

Fully Jarvis Standing Desk Jabra Evolve 40 Hook

Headphone hook for the Fully Jarvis Laminate desk top and Jabra Evolve 40 headset. Category: Office

Pobrania
39
Polubienia
6
Ocena
0
P
PrintablesJody

Jabra-Desktop-Fix

Da ich es Leid war, immer das Bedienteil suchen zu müssen, wenn ich einen Anruf entgegennehmen musste, habe ich diesen Halter für das Jabra-Bedienteil entworfen. Das Bedienteil lässt sich leicht in die Halterung einlegen und diese kann…

Pobrania
39
Polubienia
9
Ocena
5
P
Printablesnikics

Jabra Evolve2 Charging Dock tight fit

When you have issues with elephant feet on the first layers, you might sand the edges othewise the cable might not fit Printed without supports. If you use 50-60% infill plus increase the perimeter, the stand gets more heavy. an. optimum…

Pobrania
38
Polubienia
1
Ocena
5
P
Printableslanguer

Headset Hanger for Jabra Evolve 65

Basic headset hanger for Jabra Evolve 65. Meant to attach to side of modular hanging cabinet. Printed in Atomic PLA. Supports required (base plate only).

Pobrania
38
Polubienia
5
Ocena
0
P
PrintablesGRO

Jabra Evolve2 65 USB Adapter Holder

The Jabra Evolve2 65 USB adapter can be fixed to the headset Print in TPU no supports needed

Pobrania
37
Polubienia
2
Ocena
4
P
Printablesmd97

jabra evolve 65 ear pad

Print in TPU with some supports

Pobrania
36
Polubienia
3
Ocena
4
P
PrintablesDennis

Screw Cap for Jabra Evolve headset hook

Cap fits the screw, if printed with TPU /TPE it protects the office desk from scratching and has a better grip.

Pobrania
33
Polubienia
5
Ocena
5
P
Printablesfhartmann

Jabra Talk 45 - pocket case Octagon

Case for Jabra Talk 45 Octagon; I printed in PET, cap has a strong pressure fit on my settings. Took the the Original from @Zeno to get measurement and modified because I am to lacy to take it apart to fit in box. Category: Mobile Phone…

Pobrania
32
Polubienia
7
Ocena
0
P
Printablestjsteer85

Jabra 510 Pole Clip 35mm

A super simple Jabra 510 mount, allows you to clip it to a 35mm pole/ monitor stand.

Pobrania
32
Polubienia
3
Ocena
5
P
Printablesnurdok

Gridfinity Jabra Elite 7 Pro Storage

A 2x1 Gridfinity storage slot for the Jabra Elite 7 Pro case. This is based on the Gridfinity organization system by Zach Freedman.

Pobrania
32
Polubienia
3
Ocena
0
P
PrintablesBangsplat

Jabra Speak 510 Speakerphone Stand

At CRASH Space hackerspace in Los Angeles, we use a Jabra speakerphone to host virtual events, and it sounds better if it's lifted off the table a bit. We were using a mason jar of acetone, which was kind of silly, so I designed a simple…

Pobrania
31
Polubienia
1
Ocena
0
P
PrintablesTobi

Headset Holder for Jabra Evolve 40

Under desk headset holder for Jabra Evolve 40. Mountable with two countersunk srews. Important: Only the button for the busylight can be reached on the USB controller! Printsettings: - Supports - 0,2 mm layer height

Pobrania
30
Polubienia
3
Ocena
0
P
PrintablesAndre Z

Jabra Link 380 holder for Evolve2 65 Charging Stand USB-C/USB-A

I had no convient place to store the Link-Dongle when it is not in use, so I created a holder, that attaches to the Evolve2 65 Charging Stand. I have created a version for the USB-C variant and also for the USB-A variant. German - Deutsch…

Pobrania
30
Polubienia
3
Ocena
0
P
PrintablesTestfraggle

Headset holder for Jabra GN

V2 is without the plate for the thread (the white print).

Pobrania
29
Polubienia
4
Ocena
5
P
PrintablesPrintyet

Jabra Speak 510 Halter

Dieser speziell entworfene Halter für den Jabra Speak 510 bietet eine gute möglichkeit den Konferenzlautsprecher nah am Sprecher zu Montieren . Der Halter sollte aus mindestens PETG gedruckt werden um die Stabilität herzustellen Einfache…

Pobrania
28
Polubienia
3
Ocena
5
P
PrintablesJody

Jabra Speak2 55 Stand

Dieser Ständer für den Jabra Speaker2 55 hält den Lautsprecher sicher in Position und erlaubt eine bequeme Bedienung der Tasten. Der Ständer kann ohne Support gedruckt werden!

Pobrania
28
Polubienia
0
Ocena
0
P
PrintablesHannes Westman

Wall mount for Jabra headset

Easy to print, flip it to the side and just print with whatever settings / material you like

Pobrania
28
Polubienia
1
Ocena
0
P
PrintablesKablamo

Jabra Elite 65t earbuds charging stand

A desk stand to hold the charging case for the Jabra 65t earphones with usb cable attached. Here is the right angle cable used. It is a tight fit so other cables likely won't work. The part is symmetric so if you get the cable angled the…

Pobrania
26
Polubienia
2
Ocena
0
P
PrintablesNicolath3cat

Jabra PanaCast Privacy Helmet

Feel free to remix it! Comment with your make :D

Pobrania
26
Polubienia
4
Ocena
0
P
PrintablesZotrax

Jabra USB Plug Holder (and for any other USB-stick)

Print with brim. Support isn't needed. Screw hole is 3mm.

Pobrania
25
Polubienia
7
Ocena
0
P
Printablesnamakan

Jabra Evolve2 65 Charging Dock - Weighted Base

This is a remix to add slots to install 1/4oz wheel weights to give the dock some more weight. I found the original was so light it wouldn't stay in place on my desk when the headset wasn't on it with a thicker USB cable with some memory…

Pobrania
25
Polubienia
3
Ocena
5
P
Printablesflodev

Jabra Evolve charging dock (for 10 mm magnetic cable)

Remix of https://www.printables.com/model/751525 with larger hole for different kind of magnetic USB cable

Pobrania
23
Polubienia
0
Ocena
0
P
PrintablesTh0masis

Jabra headset stand

Headphone stand for Jabra Evolve 40 headset.

Pobrania
23
Polubienia
1
Ocena
5
P
Printablesb--rian

Jabra Holder for top-unit of desktop IKEA Micke

The IKEA addon can be found here https://www.ikea.com/gb/en/p/micke-add-on-unit-high-white-90180025/ https://www.ikea.com/de/de/p/micke-anbauelement-hoch-weiss-90180025/

Pobrania
23
Polubienia
3
Ocena
0