141 modeli
You need 4pcs M3x6 countersunk screw to fit the drive in the caddy. Tested servers: FUJITSU Server PRIMERGY TX120 S3 SFF FUJITSU Server PRIMERGY RX100 S8 rack server FUJITSU Server PRIMERGY RX1330 M1 rack server FUJITSU Server PRIMERGY…
Wydruk około 1,27 €–1,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print out of PETG, on the back (see eaxmple). I've used quality settings (gyroid filling, 20%, 2 perimeters), with supports for the handle, and it's just fine. Several versions are provided: _darkbruce: with my username embedded _keiko :…
Wydruk około 3,78 €–4,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Couldnt find a nice model to tprint so i created this one based on a picture i found on the flaticon.com site. Link for this and more pictures: https://www.flaticon.com/br/icone-gratis/karate_2265094?related_id=2265094&origin=search Hope…
This is a wall mount for the Fujitsu Esprimo Q920 mini PC (USFF). It consists of a base and an optional mirrored top part; the base is working fine without it, but I felt more comfortable also adding the top. Make sure that the vent holes…
Jujitsu Kaisen Inverted Spear Of Heaven. Print And Assemble Easily
3.5" HDD rail designed for Fujitsu Esprimo P-series computers. If you want to use it to slide your HDD, you'll need to print 2 pieces of this model. Bracket is designed in a way that you can use standard screws for HDD to mount it. It…
Fujitsu Futro S920 is often sell with a 2/4GB mSATA SSD. For many usage it's not enough. To avoid spending too much money on a new mSATA SSD, I designed a 2,5" drive holder to be able to reuse an old SSD that I already had. How to install…
Hotswap 2.5" HDD/SSD caddy for old Fujitsu Primergy servers. Fits as a replacement for A3C40058356, see compatibility section for servers. Fits drives up to 12.5mm, however airflow might be an issue. You can use the metal piece from blank…
Very snug fit HDD bracket for Fujitsu Futro S920. Fixed with 2xM3 screws to the Futro. Vertical printed without any supports (as in the 3mf file) 2,5" HDD with 9,5mm height fits inside. HDD can be fixed with 2xM3 screws too.
Just bought a few Fujitsu Servers, trying to develop a ssd tray for the 2,5" bays since mine somehow did not get shipped with them, and worst i could not find them online to insert any other ssd drive to them. with Version 5 everything…
The original belt model created by @Markster69 was modified by removing the loupe and adding a generic Croc jibbit post. The model was painted with grey acrylic paint to match the belt level of the recipient. A Cricut created the belt…
UPDATE: V1.1 has improved pin shape for easier mounting. I used PETG for printing because some flexibility is needed to make the little arm snap into the Kensington lock hole. 3 perimeters worked well. If you try PLA, please let me know.…
Quick modification of the Futro S740 19 inch mount by @d3n1zg for a 10 inch rack. Use two M2.5x6 flat head screws for fixing the Futro to the mount.
Description A 19-inch, 2-piece, modular rackmount for a Fujitsu Futro S740. This mount is part of a 19-inch modular rackmount system designed by @Mauker , you can mix and match the modules with other mounts. Take a look at his models here…
Simple bracket for hanging a FUJITSU FUTRO S940 thin client on the wall. Additionally, only 3x 4mm at least 50mm long countersunk screws and corresponding dowels are required. Ensure alignment on the print bed so that the upper hook can…
2.5'' SSD/HDD insert for serves like the Fujitsu Primergy rx2540
Caddy designt for the Fujitsu Server RX1330 M1. (Maybe it can also be used on newer generations) The caddy is designt for transparent filaments, you can see the HDD status LED on the front. INFO: 2.5" caddy needs support! ...the 3.5"…
Some spare HDD mounting rails compatible with Q510, Q520, Q910 and Q920 of the Fujitsu ESPRIMO Q-Series which are commonly available here or here . Spare part number: C26361-K1011-C40-*-Y369 Print without support in PETG or ASA at 0.2mm…
Eine Wandhalterung für einen Fujitsu Futro S740 inkl . Fixierung. Materialliste: 3x Dübel Fischer DuoPower 6 x 30 S https://amzn.to/3B8n8rg 3x SPAX Universalschraube, 4,5 x 30 mm https://amzn.to/3TCtTb8 --- A wall mount for a Fujitsu…
i bought the Fujutsi futro S740 cheap as a home server for smart home stuff. due to it was used i got no stand with it. here are 2 options for that for every stand you need part A and part B i printed that in ABS on my Voron
Materiał: PLA, ABS, PET-G Podpory: Tak Uwaga: Zamontuj w pierwszej kolejności dyski twarde za pomocą śrub stożkowych M3-6mm. Dla dwóch tylnych śrub M3-10/12mm potrzeba delikatnie rozgiąć kratkę, można zastosować śruby M2,5 (bez rozginania)
Feets for the Fujitsu Futro s740 thin client computer. Just use them in place of the original ones FreeCad files are added, so you are free to midify it to your needs. The repair connector is used in case the original studs are broken…
Works for Fujitsu Primergy TX1320 M3. Tool-less installation of 2.5" drives. My print settings: 0.6 Nozzle 0.25 mm Layerheight Fill pattern: Rectilinear Fill density: 50% Brim type: Outer brim only Brim width: 2 mm The Model:…
BJJ training dice Original file found here → https://www.thingiverse.com/thing:3055684#:~:text=Dice%20for%20randomizing%20jiu%20jitsu%20rolls.
Cover for 5.25 slot in Fujitsu mini tower Esprimo D756 I printed the cover in PETG. The flexibility helps with installation.
If you like the model, I would appreciate if you leave a ❤ like. Rack Mount Bracket for Fujitsu Futro S740 This bracket is designed specifically for the Fujitsu Futro S740 switch, offering a clean and secure fit in your 10-inch rack…
This is a stand I designed for the Esprimo Q556 tiny PC from Fujitsu. I've had a few clients get these machines ex-lease and they often don't come with their 'foot' this is designed to be fitted on without any screws or mounting hardware.…
I realy liked Tims Lenovo Rack mount and I was really glad he also uploaded the step file for it. I adapted it for the Fujitsu mini PC lineup (Futro / Esprimo G). The Keystone holes are at exactly the same place as the original Lenovo…
I designed another eyeglass case based on the wonderfully designed eyeglass case posted. The pattern on the exterior surface is a traditional Japanese pattern called "Koji-Tsunagi". No support is needed, if you turn on the support, you…
Ich habe das Modell einmal getestet und es hat funktioniert. Probiert es gerne aus und gebt mir Feedback ob man etwas verändern sollte o.ä. Auch falls ihr andere Montagearten benötigt Gedruckt mit nobufil ABSx 40% Infill 0,2mm Layerhöhe…
Please check the hole spacing in the drawing! If your hard drive has a different spacing, the FreeCAD source file is included. You need to remove two standoffs, the screw between them, and the internal speaker. Attach the mount to the…
este es un llavero del deporte de contacto Jiu jitsu brasileño, pensado para todos aquellos amantes del deporte ya que no encontré ningún diseño que hiciera alusión al deporte o las posiciones decidí crearlo yo mismo, !!LOS INVITO!!…
As shown in the picture, I chose to add my gym's name. You can do the same for yours in Tinkercad or whatever your 3d modeling software you prefer.
LSI 9300-8i Fujitsu model remix of original. Below is link for onshape if you need to make more edits. Need supports as per the original.…
Commentaires Je suis parti de la cage fictive servant de cache quand il n'y a pas de disque dur dans les emplacements du serveur. Ceux-ci ne pouvant accepter aucun disque, j'ai adapté la forme pour des disques en 3,5". Ce modèle vous fera…
This is a caddy rail for 3.5" harddrives on a Fujitsu Celsius M740 Power. It has been remixed from bbountyhunterr's Fujitsu Celsius Etna D3128 SSD Caddy Rail. I have designed two variants, one requiring HDD mounting screws and one…
Feet for Fujitsu Futro S920 mini computer to make it more stable when stood upright. The feet have small notches to prevent them from sliding front and back when moving the computer, but it's not a tight fit, so when lifted, they'll fall…
Under Desk PC Holder für Fujitsu Siemens.
I was inspired by a pair of 6-sided jiu jitsu dice I saw Thingiverse, but knew it could be expanded on with far more positions and submissions. Submissions: · Knee Drop Armbar · Cross Collar Choke · Rear Naked Choke · Triangle ·…
This is a belt keychain. You can modify the file to add inscribed names, dates, etc. for a gift after earning a belt. I printed 3 and painted them. It took me 7 minutes and 3.25 grams to print. If you enjoy it please like it and leave a…
Fujitsu s720 rack mount 19", or similar model. Simply mount in rack 19'. Version 1. Need add a mounting hole.
Nozzle: 0.4mm Layer height: 0.2mm Material: PETG Supports only needed for 2.5 drives. Screws: 4pcs 6-32x6mm countresunk screw for 3.5" drives. 4pcs M3*5mm countersunk screws for 2.5" drives. You can print in place. After the successful…
Mount used to attach an Fujitsu S740 Thinclient to an Ikea Skadis board. The depth of the inside of the Bracket is 37mm, hight is 47mm. — Printing Details — Printed on Bambu Lab X1C Regular PLA 15% Infill — Changelog — 07.06.2023 - Upload…
Stick on the wall with double-sided adhesive tape Please give me some feedback so I can fix the errors on the model MY PRINT SETTINGS Infill: 10% Supports: None
This is a mount for the HW-398 Power Delivery Decoy/Trigger Board for the Fujitsu Futro S720/S920. I got my hands on some of the Futro S720s without PSUs, so I was looking for an alternative way to get them powered. Found the Decoy Boards…
Prusa PETG, no support
Fully operational Fujitsu R920 Caddy, replaces the horrible fragile green caddies that snap like no tomorrow and hold the Hard Drives with just 'pins' This design has been made with consideration of ease of printing, usability and minimal…
I built a home server from 4 Fujitsu Futro s920 thin client terminals and needed a case. That's why I created this case. the cover consists of 2 parts. the second part is optional to place a Cisco Business CBS110-8T-D switch. Additional…
Insert and fixate (using superglue) a small stainless-steel/aluminium rod for the hinge-mechanism (only on the outer! hinge-parts). Be careful using the hinge – push the caddy completely in, before locking it. I tried to replicate the…
A 2,5" Hard disk tray for for the Fujitsu RX300 S8 Server. It might work in other Fujitsu Servers too. Feel free to add more Server models in the comments. You will need supports for some parts of the model.
This custom-designed 3D-printable mount allows you to securely attach a Fujitsu Esprimo Q556 mini PC under your desk for a clean and space-saving setup. It ensures a snug fit while keeping all ports easily accessible. The bracket is…
Replacement Front Panel / Bezel for APC / Fujitsu SMX / FJX 2U Rack UPS – designed to fit 2U rack-mounted uninterruptible power supply units from APC and Fujitsu (SMX / FJX series). This 3D replacement part restores the original look and…
Remixed from https://www.printables.com/model/250963-fujitsu-futro-s720-s920-hdd-sdd-25-mount Made the plate thinner allowing for more space in the PCIe slot next to the hdd (e.g. for internal power supply). This requires screws with head…
As I have not found anything comparable, here is a model that allows two additional 3.5” hard disks to be mounted in a Fujitsu P759 P758 P959 P958 and similar. Apart from the mounting of the hard disks in the bays, the model is completely…
Fujitsu AC Mini Split Remote
Caddy for 2.5" SSD to install in 3.5" HDD bay on TX1320 M1 and machines with similar mounting system.
With this bracket you can attach a 40mm fan to Fujitsu D2607 HBA card for better cooling in atx computer case. Parts needed: 2x M3 nylon 12mm standoff. 6x M3 nylon nut. 6x M3 nylon 14mm screw.
Option 1: fujitsu_primergy_cage_fan.stl fujitsu_primergy_cage.stl Cage can carry 2x 3.5" HDD drives and 2x 2.5" HDD/SSD with caddy Required parts: 8x heat insert nuts (5x3x5mm) 8x M3x8 screw 70mm fan Option 2:…
slicing the model yourself is not really the best since some slicers cant handle the details of the model so i will try to provide some gcode! i will try to get a frame for it soon so just hang around till that happens!
Navrženo , protože již nelze sehnat original pro můj server Fujitsu Siemens PRINEGY 3,5" SCSI/SAS/SATA HDD Caddy Fujitsu
Made this to mount Fujitsu Futro S720 to my IKEA Lack 3D printer enclosure. Computer acts as Octoprint server and also monitors the APC UPS. Will update the design in the future to make it possible to mount it inside 19 inch RACK. You…
passend für: Fujitsu Siemens Lifebook 19V Netzteil Category: Other
Some simple feet for the Fujitsu mini tower aka. ESPRIMO D series. The measurement was taken from a D756 but it should fit all D series cases. You need 4 “standard” pc screws to install the feet. See the head shape in the pictures.…
I printed it out in PETG. However with the step files, you can order the faceplate out of metal from services like JLCCNC or similar. For assembly just use heat set inserts (M4 5x6mm) and M4x8 bolts. The bolts on the side are M2,5 however…
This is a SSD/HDD mounting bracket for Fujitsu Futro S740 thin clients. It is used to mount the drive in the case, connected with a SATA/USB cable that is pulled through the USB-C opening. It might be useful to shorten the mounting tab on…
The model provided by @Poty_1688301 already worked great for mounting 3.5" HDDs in my Fujitsu RX1330 M5, yet I wanted to be able to switch between 3.5" and 2.5" drives without printing separate caddies. Thus my remix adds screw holes for…
You need 4pcs M3x4 or M3x5 countersunk screw to fit the drive in the caddy. Tested servers: FUJITSU Server PRIMERGY RX100 S8p FUJITSU Server PRIMERGY TX120 S3p The v2_rev2 is the best to print. There is no lock mechanism, but it fits…
Here is a Bookmark that is Gracie Jiu-Jitsu based. Please enjoy. BJJ GJJ
Print instructions I added supports to the cylinder parts on the side, probably not necessary but since the part only takes 4-5 min on the CORE One I added them just in case. Rafts: No Supports: Yes Resolution: 0.2 Infill: 100%
Introducing the Ninjitsu Tile – because sometimes stealth and precision are the keys to victory! This cunning tile waits in the shadows, ready to strike when the moment is right. When an adjacent tile triggers an ability, the Ninjitsu…
A fan mount for the Fujitsu D2607. It fits 40x40 mm fans of any depth. This design is only suitable for use in systems where the Fujitsu D2607 is mounted “normally”, like in common consumer cases, due to gravity holding it in place. I…
When fitting the S920 with a HDD (e.g. using this adapter ) , the speaker needs some relocation. https://github.com/asdil12/3dp-models/tree/master/s920_spkr
Base for fujitsu clients. Depth 46mm. External width 96mm Internal width (thin client slot) 52mm With groove for double-sided rubber tape.
Description A 19-inch, modular rackmount for a Fujitsu Futro S740. This mount is part of a 19-inch modular rackmount system designed by @Mauker , you can mix and match the modules with other mounts. Take a look at his models here to see…
Two types of buttons for Fujitsu-Siemens Lifebook S7110 keyboard. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.1mm Infill: 20% Filament: gembird PLA+ white Category: Replacement Parts
These laptops can be found for next to nothing on polish site Allegro. They are often stripped from all covers, battery, etc. These covers fits exactly like the originals, which they are based on. Probably fits to more Lifebook models,…
I pasted Q508left and Q508right with some pieces of double-sided tape on a plastic sheet. There are holes to access USB and DC connectors in the left side. Material: PLA Support: No Nozzle Diameter: I use 0.6 mm
Fujitsu AR-RAH2U Wall Mount
The difference between files is 16mm in length, as 90º doesn't need as much space as flat SATA cables DISCLAIMER: THE PHOTOS REFLECT THE ORIGINAL DESIGN. THE .STL FILES ARE SHORTER AND WORK AS EXPECTED. I'M JUST LAZY AT THIS POINT TO NOT…
"button back.stl" need to printed on the side + supports Both should be glued together before installation. (Compression Spring 10x12mm needed)
I printed my version in Prusament PETG Galaxy Black. Because of how the computer mounts to the adapter, PETG is preferred. No supports are required and it should print fine without a brim, at least on a PEI build surface with PETG. Fits…
Recomend PET-G and grainy plate.
My air conditioning remote control was missing a wall mount and I kept looking for it around the office. The mount was printed with a concrete texture. It's not a printer setting fault.
Custom stackable server enclosure built to stack two Fujitsu Esprimo Q920 mini PCs and cool them efficiently and quietly with a single 120mm fan. The top and bottom pieces are screwed together by 3x #6-32 screws. Reuse the fan screws from…
The tight pass between the top and the bottom should provide a fine grind.
Fujitsu Futro S720 S940 1U 10-inch mITX tray
With the v2 version, you can fix the adapter with an M3 screw to the card. But it is not neccessary, the adapter tightly fit to the RAID card. Recommended filament: PETG
ESRack module for Fujitsu Futro S740ESRack module for Fujitsu Futro S740 Fitting to the fabulous ESRack Ecosystem by EvilProphet Suggested Print Settings Material: PETG Nozzle: 0.4 mm Layer height: 0.25 mm Wall loops: 3 Top/Bottom shell…
This is a SSD/HDD (reversed) mounting bracket for Fujitsu Futro S740 or S7010 thin clients. It is used to mount the 2.5" drive in the case. I needed a reversed version as I am using the internal SATA (after adding power connector, SATA…
Hey, this is my first upload. I hope it will fit correctly for your purpose. The first model was from: @Poty_1688301 The remix was from: @ntnt I needed this caddy for another project and found this remix. After I printed the first caddy I…
Use 8 (or 12) power supply screws (#6-32 Phillips Hex) to connect the adapter to the 5.25" blank.
Just a simple Fujitsu Q556/2 stand, nothing special.
Holder to attach the dock underneath a table or wall, just print, attach to table and snap the dock in. All ports are accesable.
HDD Caddy for Fujitsu Oracle SPARC based servers M10 and M12 series.
This is a custom server holder / mount for the Fujitsu Esprimo Q920 , designed specifically for the IKEA SKÅDIS pegboard system . It allows you to neatly mount your mini PC or home server on a pegboard for better organization, airflow,…
Replacement for broken ejection catches on Fujitsu magneto optical drives.
I snapped in half the clip that keeps the tray locked inside the front slot of my Fujitsu Primergy TX1330 M3 case. At first I thought it was game over and that I'd need to buy a new one; then I found out that the clip can actually be…
A simple loose fitting, wall mountable AC remote holder for Fujitsu ACs. Mountable using double sided tape or using two sunk head screws. The mount was designed in Autodesk Fusion 360.
The holder fits the LX-6537C charger. The charger can be attached with double-sided tape. Power is taken from the computer's power socket. I also added a slightly stiffer and inverted version so that an angled SATA plug could fit…
No supports needed. I printed the model in PLA (15% Infill).
