1862 modeli
Hi everyone, the Controller is designed to be printed standing up without supports. There is a bit of postprocessing required to remove the custom supports for the Trigger button flexure. Enjoy printing
Wydruk około 4,85 €–5,93 € nettoWstępna wycena jednego wariantu
A Nintendo Joycon grip with front-looking windows for the LEDs. It prints without supports and the LED windows face forward, so you can see them right as you normally hold the joycon. The LEDs shine into a slit that arrives to a 45º…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
I designed Joystick Toy in Fusion360 and prototyped it through several stages before landing on this design. I only recommend printing this assembly in PLA or a material that maintains dimensional accuracy after printing. It prints well…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
This print is useful to increase aiming accuracy for people in certain games. I personally needed that in Call of Duty Modern Warfare 2 Multiplayer mode. When you play without an extender, you can easily realize that sensitive aiming is…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Credits to manabun on Thingiverse for the great original design! Original: https://www.thingiverse.com/thing:2769344 I modded the design to be printable in a better position without support. The slot is slightly modified for an easier fit…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've lost my JoyCon straps and found hard to find replacements online. So I designed a 3D printed replacement that works just as fine. Print is provided with two design variants. One screwed, one glued. You'll need a few aditional acces…
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
Visible on the photos, the wrist wrap does get in the way to fully close. This fixes this. Sadly made no new pictures.
Wydruk około 6,08 €–7,43 € nettoWstępna wycena jednego wariantu
Other options for joycons didn't fit my hands well or the controllers didn't lock correctly. This model has a 20 degree angle between controllers and they lock tightly into the model. There is space between the controllers where my…
Wydruk około 4,46 €–5,45 € nettoWstępna wycena jednego wariantu
Hello, I propose a clamp for the GLITTER GEL CRICUT JOY pen to be mounted on your CRICUT MAKER 3. To be printed without support with a raft. Good print !
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Hello, Today I have a Stranger Things shelf for 12 Kinder Joy figures for you. The shelf is designed to display figures from Kinder JOY eggs. It is designed for 12 of these figures. If you have more, you can put them on top :-) Happy…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
Hi guys! Well, clearly I should have uploaded this design a long time ago , but you know how it is, you chase time, then it passes, then you forget... But the controller contest made me think about it again and I hope it will be useful to…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
I added the words “to the world” and arranged it in the size an position to glue it on a christmas giftcard.
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A case to put your joycons in when traveling.
Wydruk około 2,50 €–3,05 € nettoWstępna wycena jednego wariantu
i couldn't find a case for the KMTech Amiga auto mouse and joystick switcher, so i had a go at making my own. this is a fairly basic case that has a pair of light pipes in the lid for the leds that indicate which port is active. there are…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Check out the Alpakka controller, its a really nice project, and it works like charm, since I built mine, this is the only controller I am using for PC gaming. I made the joystick cap out of TPU and gave it a fuzzy skin in the slicer…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
Adeept Joystick Module Case This custom 3D-printed case is designed for the Adeept joystick module, providing protection while maintaining full functionality. It securely houses the module, preventing damage while allowing easy access to…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Shelf for Nixie Clock Noyce Joyce Shop list: 2x wood screw M4x35 2x dowel
Wydruk około 4,73 €–5,78 € nettoWstępna wycena jednego wariantu
Die 440/480Watt Solarkoffer von Plug-In Festival, Wattstunde, Enjoy Solar oder Offgridtec können nur in einem festgelegten Winkel aufgestellt werden und der ist extrem flach. Meine einfache Lösung verwendet mehrere Schlüsselbänder mit…
Wydruk około 1,69 €–2,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a replacement handle for the Joyce Chen flat-bottom wok ( https://www.amazon.com/gp/product/B0001VQIP4/ ). The wok comes with resin handles, but many owners have experienced failures in these handles, and replacement handles are…
Wydruk około 4,21 €–5,15 € nettoWstępna wycena jednego wariantu
Check out My 2.0 Version of this design! Joy Fidget 2.0 A simple and easy-to-print fidget toy! That looks like a little joystick. Perfect to test your printer or just as a fidget on your desk. It makes use of a spring gear that will bring…
Introduction This is Joy Fidget V2.0, the successor to the original Joy Fidget . In this version, I have made significant enhancements, particularly to the clicking mechanism. Gone are the days of the original flawed click-in mechanism;…
This model is the old version. The new model with improved printability and enhanced accuracy is here! https://makerworld.com/en/models/570404 If you wish to sell prints from Manabun Lab, please refer to this.…
Original part : https://www.myminifactory.com/object/3d-print-nintendo-switch-joy-con-wheel-pro-29687
This fidget toy is a joystick toy applied ball joints. It is designed to be operated smoothly and unconsciously with one hand. You can adjust the tightness by tightening the screws. Print settings: Material: PLA, PETG Layer height: 0.20mm…
A better JoyCon Grip than the original due to more ergonomic Design. This is a remix from death4u's Xbox JoyCon Grip, which is itself a remix of JoyXBoxCon - Joycon Xbox Style Grip by Max_Luck (https://www.thingiverse.com/thing:4230868)…
Like the original model, it's printable without generated supports, though you can choose to enable supports to avoid sagging bridges. I printed with a brim, but the brim may not be necessary if you have good bed adhesion. After printing,…
When trying to repair joy-cons I as do many people, striped one or more Y-screws and had to damage the shell remove the screw and repair the joy-con. So I needed a new shell but why buy something small and made of plastic when you have a…
UPDATE: Complete with Mindflyer and 2 figure stands. A 22-piece stand for the popular Stranger Things figures, with the logo in the middle.A 22-piece stand for the popular Stranger Things figures, with the logo in the middle. PLA 0.2…
This is a Nintendo Switch 2 Joy-Con Grip. It works better with magnets, but is also fine without. 4 magnets (8x3mm) can be pressed into the sides. Best to print standing up. Supports do help with the bridge up top, but are not strictly…
I made this Grip for comfort when you use mouse function with your Joy-Con 2. Tested it works.
A slightly remix of "Harry Potter Kinder Joy Shelf" by @PavelNytra_273350 Base box 4x3 and logo are merged to one file that can fit on ~245x180mm print area. Also additional wand (credits to Duffy_544591) for pencil holder etc
Customize your own JoyCon grips. Two Animal Crossing designs and STEP file included. Note: Please ensure your extruder is properly calibrated. The first time using this will be snug , but will loosen up just enough after a couple of uses…
A simple and easy to print fidget toy uses a print in place ball joint I designed in fusion 360 once printed, force the toggle to the side to release the inner support. Print at .2 layer height and use z hop and at least 3 walls/perimeters
Description: Joy Con gun for shooter games. Printing: Layer height: 0.2 Supports: No Material: PLA, PETG, ABS Assembly: The connections between the parts can be glued or connected with M4 screws. The extension is not necessary and is only…
Don't forget to like and comment. I want a joystick grip that looks cool and feels like it's the real deal. Voilà This joystick grip has been inspired by the original sidestick, which is installed in Airbus airliners. Based on this…
Joystick with mechanical trim feature that you can use with remote control circuits. Filament: PLA (Can be printed with Normal/Standard slicer settings.) My Youtube Channel: https://www.youtube.com/@Kendin-Yap
While the "Nintendo Switch Joy-Con Wheel Pro" is the best looking design and ergonomic to steer, the L/R button are very hard to reach as many have found. It is simply not usable for kids, so I made paddle buttons for it. The “Nintendo…
Suitable for Funko Pop and other figures with the height of ca. 4 cm. Simple castle themed shelf I made to house our collection of Funko Pop mini figures from the Harry Potter series, which came in Kinder Joy surprise eggs this year.…
Experience the peak of freedom with this Gear 5 Luffy figure! Capturing the iconic 'Sun God Nika' laughter and fluid cloud effects, this dynamic sculpt brings the most legendary moment in anime history to your desk. Designed with sharp…
This model is the old version. The new model with improved printability and enhanced accuracy is here! https://makerworld.com/en/models/579623 If you wish to sell prints from Manabun Lab, please refer to this.…
U can print this as one part in standing orientation.
Harry Potter shelf for Kinder Joy toys. The model is divided into 2 parts that simply snap into each other.
Y accept requests for another artist, song or playlist that's not on the list, It'll be the same base for them. Artists: Camila Cabello Katy Perry Taylor Swift Bad Bunny The Weeknd Lana Del Rey Morat BTS Jesse & Joy One Direction Peso…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
Deutsch: Dieser kompakte Adapter macht einen einzelnen Joy-Con bequemer für Multiplayer-Spiele. Er verbessert die Ergonomie und sorgt für besseren Halt, besonders bei längeren Spielsitzungen. Einfach zu drucken und ohne zusätzliches…
The existing things did not fit my sons ideas. So I made another variation. Inspirations: Holder for Joy Con and one Grip Holder for Joy Con with two Grip (but Grip does not fit) This is the cartrige holder we use. Actually I did not…
Display your Stranger Things collection in style with this custom 3D printed display shelf inspired by the iconic Netflix series. ✅ Perfect fit for all 24 Kinder Joy Stranger Things mini figures or small Funko Pop collectibles. ✅ Detailed…
Hello everyone! I would to share with you my Switch's JoyCon grip and straps stand. I also designed anti-slip feet printed out from flexi filament, whitch help keep stand in place. It's not necesary to print flex feet and Nintendo's logo,…
I found TomoDesign's Joy Fidget earlier today, printed one out and thought I'd try remixing it to fix a couple issues I had. First off, its a great model! Simple printing, easy assembly, novel design on the spiral spring and fun to play…
Remix of Nintendo Switch Joycon Controller by MiddletonMade . Holds the joycons while playing multiplayer games. Two designs, the narrower v1 and the wider v2. Background A coworker was confused by the printing instructions on the…
This is a holder for a Joycon to make it more comfortable than using it on its own. I have included shoulder buttons on the holder so there is more to press. There is an included version of the STL with these buttons removed in case…
Simple holder for four Joy-Con Straps Print instructions Category: Video Games Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: DasFilament PLA
This print could be very useful for people with disabilities and could give normal people more accuracy on certain games and joysticks, this print could possibly be put on PlayStation, Xbox, Steelseries branded controllers as well as the…
Update 2024-07 : I added some variations of the model with slightly wider tolerances as for some people the default version was too tight. The notch that holds the joycon is 0.1/0.2 mm thinner in these versions. I also added a file with…
Hier gibt es eine neue Version für die Harry Potter Funko POP Reihe aus den Kinder Joys. Im nach gang wurde noch ein Besen erstellt der unten dran Geklebt wurde. Guten Druck
A tip as appreciation is welcome. This is a small Joy-Con grip. We pursued a simple design that is easy to grip. Please enjoy! Single joy-con grip is here https://www.printables.com/model/184284 Joy-con Grip (store the strap) is here…
Check out my project portfolio! https://www.everyview.net/magsafe-gaming-grip You need to order magsafe magnets to make this all work together. You can order them on amazon or wherever you can find them, but if you want to use my amazon…
Joycon Grip as close as possible to the original while being easily printable Available in two versions: standard , without any modification (with leds NOT visible) modified, with holes for the led indicators Print instructions: The files…
This is a giant Joy-Con, with a real Nintendo Switch controller on the inside. The stick and buttons are connected to the real controller via flexure linkages. It's exactly three times larger than a Joy-Con in each dimension, making it…
After spending a fair while trying to get a JoyCon strap replacement I liked the closest I found was Po1nt's. I took his design & modified it a little: I'm using radius's instead of a flat bevel I moved the latch retainer so that it works…
I needed a simple and lightweight front cover to protect the joysticks and the screen when traveling light, so I made one. Two versions: partial cover and full front cover: Prints as a single piece in the P1P and X1C (and any larger…
After using the original to hold drinks, I noticed that the joy cons had a tendency to slide out of the rails due to the weight of the beverage. So instead of trying to modify the original STL, I figured it would be easier to just model…
ErgonoMouse is a do-it-yourself 6DOF Controller (6 Degrees Of Freedom) based on Arduino. Or commonly known as "space mouse". It uses commonly available hardware (see “Required Hardware” 🡣) and it requires intermediate printing,…
Hey here is another one of those joycon jig tools. I used cat5e wire removed from its protective coating and pushed into the slots. Print at 0.1mm layers or send it off to a high quality print service. Shapeways is great for little things…
Credit to my son for the name; it's fun to say. EDITS: See bottom for details A long time ago I got excited and found that gimbal design by ulokelo and asked my neighbor to print it. He did, then I learned it had no Z axis and I got sad,…
I wanted to take a crack at designing my own Joy-Con controller grip and this is what I ended up with. The JoyCon_Grip.stl can be used on it's own for smaller hands but can be combined with the Attachment.stl to make it more comfortable…
This is a spacer meant to be used to repair joy con drift using the method shown in this video: https://www.youtube.com/watch?v=Vid8lIXmZwE Instead of cutting cardboard and that imprecision, you can just print this spacer instead for that…
Don't forget to like and comment. Right-handed joystick grip that looks cool and feels like it's the real deal. Voilà! 12 buttons: 1 trigger, 1 pinkie switch 2x 5-way hat switches This joystick grip is inspired by the Knüppelgriff (stick…
Simple to print fidget toy, print both halves, install the tactile button, and snap the two halves together. Use a 6x6mm tactile button like this: https://amzn.to/46L9ypf Snip off the legs or bend them back and forth a bunch of time to…
Use this to rough-in your Tinkercad or Fusion 360 (or any CAD) designs that include this joystick. The measurements are accurate for the stick I used in MY design, yours may not measure exactly the same as mine due to differences in…
I wanted to create a print in place fidget that was an easy print. I came up with this design. I printed these on my Prusa XL with a 0.6mm nozzle at 0.15mm layer height in PETG (base) and PLA (joystick) and on my Bambu Lab X1-Carbon with…
Edit 29.09.2022: I added an improved top cover with integrated buttons (no longer losing those tiny parts!), similar to the Prusa mk3s reset button. Also added holes for LED where the LEDs actually are - the old one had a hole for viewing…
This is a foldable display stand designed for Stranger Things Kinder Joy figures and mini Funko Pops. The goal was to create a compact display that looks good both opened and closed, while remaining fully 3D-printable and easy to…
Switch controller / joycon holder Designed by R_vdk Application / Functions I needed a simple storage system for the extra items I had witch my Switch. The model provides storage for the add-on pieces when using the joycons separately, as…
I designed this model to suit Ender 3 v3 se bed size. 3 parts should be connected by using “joints”. Also you can glue them together. UPDATE | Added variation with solid back panel and f3d file.
Petite ou grande décoration de Noel, vous pouvez l'agrandir à vos souhaits, à placer sur le mur, le sapin, les fenetres, etc … Il y a 2 modèles différents : joyeuses fetes ou joyeux noel. Imprimé avec une hauteur de couche de 0.2 et un…
Got an idea to design Joycon holders, this is one of the designs I came up with. The fit of the joycons are fine tuned to my crude (but upgraded) machine, Anet A8. The .STL should work ok for most printers tho. If you like my designs,…
I created this file in the context of helping a friend with his Harry Potter Kinder Joy collection, I started by using an image I found on the internet and moved it to the program (3D Bulder) and created the shape of the piece as you can…
replacement for the rubber top of joy-con thumbsticks. based on the shape of Xbox sticks. Must be printed in TPU or other flexible material. I could probably make a version that needed glued on or tight tolerances to allow other materials…
IMPORTANT - Magnets required for this project I wasn't able to find any good 3D printable Switch 2 Joy Con grips, so I decided to model one for myself. I've printed it, tested it and it works great coming from my Elegoo Neptune 4 pro.…
Separate grips for Joycon 2's that let you play ergonomically and still spread your hands! And yes, they are also dockable and can be used in handheld mode. They can also be used as a sort of kickstand given the sturdiness, if using…
Here is a famous white rose cover of Depeche Mode's "Enjoy The Silence" Cover in 3d of course. By Daniel Vercillo 12\2\17 Print instructions Print solid using PLA with supports.
A very simple thingy that keeps the Switch 2 JoyCon straps together when not attached to the JoyCons. The JoyCon straps fit in either orientation, you attach the same way you attach them to the JoyCons (i.e. hook the strap end on first)…
Have you ever dropped your Nintendo Switch or bumped your joy-cons too hard or just worn them out and they won't latch anymore when you plug them in? Well majority of the time, the little plastic piece hidden on the backside of the…
لقد طورت حامل جهاز التحكم لجهاز البلايستيشن حيث جعلته اسهل في الاستخدام و اوفر في الفلمنت و يستخدم بواسطلة شريط لازق ذو وجهين I have upgraded the joystick holder to be easier to hold the joystick by using the double face or scraws. if you…
The Sharpie Fine markers will fit in the Cricut Joy, but the rim is different from the original markers. With this adapter you can use your Sharpie on the Joy without problems. Incl. Fusion360 file
3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Sell unique, stylish, and modern 3D models with a commercial license – no restrictions, full freedom! 💸 Why…
easy to print toy for kids and stress reliever. Easy assembly. No supports needed. But are recommended. Printed from PLA+ Layer height 0.2 mm Printing time about 10 hours. You need 4 springs made of a ballpoint pen and some filament as a…
Joystick guards for traveling without a case. Use 6x2mm magnets and snap in gently. If they are lose, can be glued (not my case at least). No supports needed. Bolts are not needed since it has a hinge printed in place
This is a no-glue no-supports removable joystick to hold between your index fingers and thumbs.
Display stand for 22 Kinder Joy figures with a honeycomb design. Includes LED backlighting from Tedi to highlight the figures. Backlight must have leds spaced at least 10cm apart or more. The stand is easy to assemble and perfect for…
Created for the Samsung Galaxy Z Flip 3 to be used with Joycons from a Nintendo Switch. Great for games that play in Portrait mode, though lower resolution games feel very fun to play with also! I printed with no supports and 0.2mm layers…
(print in TPU!) As the Joysticks of my trusty (wired) Xbox 360 controller are all worked up over the years I decided to make my own little caps to improve on grip again; fortunately fits PS4 controllers as well (DualShock4 v2) and might…
Slides into Joy-Con rails and clicks into place. Tall enough to charge while playing, flat enough to stash in your switch case. STP included for custom accessories or angles! To remove, press the round part in and slide up using the…
Reemplazo para el joystick del mando de xbox one. se me rompió la goma del original y hice este nuevo.///Replacement for Xbox One Controller Joystick. I broke the rubber of the original and I made this new one. Print instructions…
I feel that this is a major step up for the open source Space Mouse. The current potentiometer joysticks used have two main issues: They work by wiping a metal contact on a carbon track - the carbon track will eventually wear out. There…
This is a 3D printable angled holder for Nintendo Switch 2's Joy-Con 2 controllers. Designed to hold your controllers at an ergonomic angle to enhance comfort during long gaming sessions. Magnets Required: This holder uses 20x10x5mm…
I need a joystick, but the ones I find are not like mine. I have designed one like the one I have for my designs.
disclaimer: I was heavily inspired by a 3D model of killjoy that was/is in game. Character belongs to Riot Games. Here is my 3D model of Killjoy from VALORANT.
![ErgonoMouse [Free version] - 6DOF Controller Knob & Joystick with Wheel, Buttons & Keys](https://media.printables.com/media/prints/973725/images/7443301_6431622c-6203-4049-abb5-c021b4241c1f_e177f1da-39c9-4328-8e49-8818ce495155/promo-knob-free.png)
![Arduino KY-023 Joystick Module [MOCKUP]](https://media.printables.com/media/prints/498437/images/4055346_2a20c205-6a4b-4ced-96d0-ed921285f9c6/ky-023-joystick-module.png)
![Nintendo Switch 2 Joy-Con 2 Ergonomic Grip [v1.3c March 05 Update]](https://media.printables.com/media/prints/4b7b552d-4c32-42a9-a2fc-27f7983368f5/images/10801860_1b8c1673-aade-4e65-8542-53cdf24acab9_2e3fcda5-3eaa-40b1-b4e4-d4319db0bad5/img_1898.jpg)
