Wyniki wyszukiwania: kayoumini

Sortowanie

82 modeli

P
PrintablesKayou Frames

Kayoumini 2.5" - TPU Collection

This page is a Wiki regrouping all the necessary informations about 3D Printable TPU Files for the Kayoumini 2.5" . All of the .stl files are available in the “Files” tab. Kayoumini 2.5" Starter Pack - All you need to know Recommended…

Pobrania
5085
Polubienia
195
Ocena
5
P
Printableslukefpv

Stronger Kayoumini TPU Battery Straps + Cable holder + Balance Plug holder

Added another layer to the original design to hold the individual Battery strap strongly in place - minimizing potential damage to the FC/O4 air unit during a crash. Added a version that holds the XT30 cable firmly in place, away from the…

Pobrania
545
Polubienia
32
Ocena
5
P
PrintablesKayou Frames

Kayoumini 2.5" Travel Case

Print in rigid filament (PLA, PETG etc). Total plastic required is ≈140g. Additional hardware required : 6x2mm Magnets 1.75mm Standard filament (PLA, PETG, Whatever) for the hinge. Hinge and magnets are mounted as shown : Use cyano glue…

Pobrania
540
Polubienia
57
Ocena
5
P
PrintablesKrhom
Pobrania
505
Polubienia
41
Ocena
0
P
PrintablesKrhom

Kayoumini TPU Battery Straps (with source)

I made this to hold my Betafpv Lava 450 packs, but you can find the (super simple) source in the downloads so you can easily edit the dimensions. Print out of TPU.

Pobrania
486
Polubienia
34
Ocena
5
P
Printablesmosch

Kayoumini 2.5 Flywoo O4 Wide Lens Mount (for the Kit / Camera)

Update 08.02.2026 noticed that you can't flip the video feed in the goggles anymore. So cam needs to be rotated 180 degrees and therefore the "backplate" needed changes 15, 25 and 35 degree mount for Kayoumini 2.5 and the Flywoo O4 Wide…

Pobrania
345
Polubienia
22
Ocena
0
P
Printableslukefpv

20+25 Degrees Kayoumini Mount for Flywoo DJI O4 Lite Wide-Angle Lens

Updated version now allows easy ND-Filter switch and adds support for 12mm and 15mm Standoffs.

Pobrania
333
Polubienia
25
Ocena
5
P
PrintablesMaximotep

KAYOUMINI led TPU kit (remix)

Remix du très bon kit TPU led pour Kayoumini de shaks -TPU de bras UltraHeavy/light version ©®™ -Backpack lineaire kit TPU led avec passage de cable xt30 (sans antenne ELRS, c'est pour les faible) -Camera mount pour baby ratel 2 à angle…

Pobrania
282
Polubienia
16
Ocena
0
P
PrintablesKemik

Mount for Kayoumini with Flywoo DJI O4 Lite Wide-Angle Lens

Made for Kayoumini with Flywoo DJI O4 Lite Wide-Angle Lens Angle - 35/40/45°

Pobrania
254
Polubienia
20
Ocena
0
P
Printablesshaks

Kayoumini Arm UltraHeavy

Salut à tous !! Voici une protection de bras plus venère pour le Kayoumini . Je cherchais des protections de bras pour protéger nos petits moteurs de chez happymodel qui sont très fragiles. Pour ce qui est du filament j'utilise le…

Pobrania
223
Polubienia
26
Ocena
0
P
Printablesmosch

Kayoumini 2.5 XT30, DJI O4 antenna and ELRS holder

Kayoumini 2.5 XT30, DJI O4 antenna and ELRS holder

Pobrania
222
Polubienia
14
Ocena
0
P
Printableslukefpv

Backpack variations for Kayoumini

Holds antennas firmly in place + easy printing + polygonal design.

Pobrania
178
Polubienia
10
Ocena
0
P
Printableslukefpv

Lighter Kayoumini 2.5 Flywoo O4 Wide Lens Mount (for the Kit / Camera)

Reduced weight of @mosch_3121698 's design by +1 gram. Adapted to 15mm standoffs. 25 degrees only.

Pobrania
141
Polubienia
10
Ocena
0
P
Printablesdanielkbx

Kayoumini Antenna Mount + Balancer Holder

This is an antenna mount for the Kayoumini quad. It features holders for the RX antenna, the VTX antenna and storage for 2S balancer plug. Choose between 14 and 15 mm standoff height and 3.5 and 4.0 mm standoff diameter. Print with TPU in…

Pobrania
138
Polubienia
10
Ocena
0
P
PrintablesMajor

Kayoumini Flywoo Wide Canopy

Kayoumini Flywoo Wide Canopy 20 degrees 12mm and 14mm Standoffs. I print lens down for best results.

Pobrania
134
Polubienia
8
Ocena
0
P
PrintablesD A

Kayoumini 2.5" Case

Case for kayoumini. Inpired by this model https://www.printables.com/model/1169325-kayoumini-25-travel-case Printed with PLA without support

Pobrania
133
Polubienia
10
Ocena
0
P
Printableslukefpv

Kayoumini Travel Case Easy Print Variations

Simplified and easy to print Kayoumini Travel case with and without magnet insets. Additional Hardware required for magnet case versions: 6x2mm Magnets 1.75mm Standard filament (PLA, PETG, Whatever) for the hinge. Attention Designed for…

Pobrania
129
Polubienia
13
Ocena
5
P
PrintablesKrhom

Kayoumini: Parametric Camera Frontend

This is a fully parametric reproduction of the original Kayoumini frontend by Kayou Frames in Autodesk Fusion. You can easily tweak it for any camera by changing the user parameters here: Here are the available parameters A quick rundown:…

Pobrania
119
Polubienia
19
Ocena
0
P
Printableslukefpv

Kayoumini Mod for new Flywoo O4 Wide Lens

Light-weight (2.3g / 1.7g) Flywoo O4 Wide Lens mounts for the Kayoumini. My goal with this Mod was to create a very light and compact canopy. By moving the tall Flywoo wide lens in front of the bottom plate it created two additional…

Pobrania
115
Polubienia
17
Ocena
0

sturdier Kayoumini Parts (skids)(Caddx Ant canopy)(motor protectors)(vtx anenna holder)

A little Stylish rework of the canopy for the caddx ant (i actually redesigned it from the ground up, but i made it to be the same shape) with some slots to be colored with nail polish. that is a bonus if you care for color matching your…

Pobrania
93
Polubienia
8
Ocena
0
P
PrintablesHidde3D

Kayoumini Stronger Batterystrap Balance and XT30 Connector

Information The other designs I saw with a holder for the balance and/or XT30 connector had only one of the connectors on the strap or not at the right place. So I just modified the version with the balance connector and added an XT30…

Pobrania
90
Polubienia
5
Ocena
0
P
PrintablesGé Fpv

Kayoumini Backpack xt30

Kayoumini Backpack xt30

Pobrania
79
Polubienia
8
Ocena
0
P
Printablesshavoado_void

Kayoumini 2.5" backpack

Kayoumini 2.5" backpack housing XT30, default DJI O4 antenna and TBS Tracer Immortal T (I believe it has 80mm cable). For 15 x 4mm standoffs. Slightly larger version of "kayou_ass_xt30_90d_fixed" with XT30 removable without soldering and…

Pobrania
78
Polubienia
2
Ocena
0
P
PrintablesChris's Cave

Kayoumini DJI 03 lens mod

Modified original 20 degree Kayoumini to use DJI 03 lens. Printed in TPU as the original.

Pobrania
75
Polubienia
5
Ocena
0
P
PrintablesBarrabajo_

Kayoumini Lens Cover

This is a lens cover for the Kayoumini frame from Kayou Frames. It prints quickly and only using 1.5g of filament, so its a fast and cheap upgrade for the drone. It snaps into place and to remove it just pull out of one of the tabs on the…

Pobrania
68
Polubienia
7
Ocena
0
P
PrintablesSeismograf

Kayoumini Crown+ELRS Backpack

This is a backpack for the kayoumini, the Happymodel Crown antenna, and an ELRS T-Antenna. An 18AWG power cable should fit on top, but I didn't test that. There's a short and a long version. The short one is a quick edit in Meshmixer,…

Pobrania
64
Polubienia
4
Ocena
0
P
Printablesrady fpv

kayoumini old back pack

tadam les print soidixsant inutile de rady

Pobrania
60
Polubienia
4
Ocena
0
P
Printableslymm

Kayoumini Case 6 battery version

This is a storage box designed for the Kayoumini , featuring an upper holder that can secure up to 6 batteries . The design was made using Flywoo Explorer 420mAh HV 2S 80C batteries , but other batteries with similar dimensions may fit as…

Pobrania
59
Polubienia
11
Ocena
0
P
PrintablesKrhom

Kayoumini Frontend for DJI O4 CO3 Lens Mod

Frontend to go alongside my Betafpv CO3 Lens Mod for the DJI O4 “lite” that can be found here: https://www.printables.com/model/1380946-dji-o4-lens-mod-betafpv-co3-lens-my-best-to-date I've only exported the 25deg STL that I use, but I'm…

Pobrania
52
Polubienia
7
Ocena
0
P
PrintablesDanulal

Kayoumini HDZero AIO15 TPU battery straps + cable routing

This fits a kayoumini build using the XT30 cable that comes with the AIO15 and I have tested it with the flywoo explorer 420mAh HV 2S LiPo Inspired by models such as: and

Pobrania
51
Polubienia
3
Ocena
0
P
PrintablesGalinette

Camera mount / HDZero Nano 90 / KayouMini / 25 degrees

This is my HDZ Nano90 TPU camera mount for the KayouMini FPV quad frame. In order to reduce weight, instead of holes, I use a single perimeter, with 15% gyroid infill. This creates a light “air matress” effect that protects the camera…

Pobrania
50
Polubienia
5
Ocena
0
P
PrintablesBoudrick

KayouMini TPU (NanoV3, TrueRC)

I built a KayouMini with the components I had left: a Flywoo Nano V3 and a TrueRC Singularity antenna. The camera mount lets me install the ELRS antenna and route the XT30 cable over the top so it won’t get hit by the props. The antenna…

Pobrania
50
Polubienia
3
Ocena
0
P
PrintablesMrWhite

Kayoumini - DJI O4 wide lens Cam holder

Here's a camera mount for the new original DJI O4 wide-angle camera. I designed it for my own frame, which you can find here: The camera housing should also be compatible with the Kayoumini. It was designed for base plates ranging from…

Pobrania
48
Polubienia
3
Ocena
0
P
PrintablesHidde3D

Kayoumini C03 20°/25° Camera Mount

Information I made a 20° and a 25° degree camera mount for the BetaFPV C03 cam. I couldn't find any good mounts for the C03 that looked like the original. Kayou Frames has a 30 degree version on their Printables page but that's pretty…

Pobrania
45
Polubienia
5
Ocena
0
P
PrintablesThomas More

Kayoumini O4 Camera Mount with Push Fit ND Filters

Just a quick remix of the original 20 degree o4 camera mount for the Kayoumini. O4 ND filters from Flywoo. I do recommend printing in black TPU or at least not in a translucent colour like I did because you will see some of that colour…

Pobrania
44
Polubienia
6
Ocena
0
P
Printablesshaks

MPX kayoumini mod dji o4 lite

Petite conception rapide, histoire de tester, de s'amuser, pour faire une MPX en mode Kayoumini. On gratte un peu de poids si on compare au TPU Red Bull. On perd à peu près 10 grammes, ce qui n'est pas négligeable. On retrouve un peu le…

Pobrania
44
Polubienia
5
Ocena
0
P
PrintablesSmika

HDZero Lux KayouMini Canopy

This was made for using the lux camera with the aio15 in the kayoumini.

Pobrania
42
Polubienia
6
Ocena
0
P
PrintablesMrWhite

Kayoumini - Flywoo DJI O4 wide lens Cam holder

Here are a few camera mounts for the Flywoo DJI O4 wide-angle camera. You can also attach ND filters! The mounts were actually designed for my own frame, which you can find here. The camera housing should be compatible with the Kayoumini.…

Pobrania
41
Polubienia
7
Ocena
0
P
PrintablesHidde3D

Kayoumini 8mm Backpack RushFPV Cherry II

Information The backpack is designed for the RushFPV Cherry II but should fit with other RHCP antennas that are the same size. I also uploaded the STEP and F3D file if you want to edit the design. Printing Instructions Print with 95A TPU…

Pobrania
40
Polubienia
2
Ocena
0
P
PrintablesSmika

KayouMini 2 Antenna BackPack 12mm Standoffs

Remix of the backpack for my two antennas, space for wires underneath and antennas up top.

Pobrania
38
Polubienia
5
Ocena
0
P
PrintablesGé Fpv

Kayoumini 25deg Frontend for the O3 Lens Mod on the DJI O4 *Flywoo ND filters version*

You can use the flywoo o3 lite nd filters with your o3 lens mod (dji o4 lite). For 12mm standoffs / 25 degrees of tilt

Pobrania
37
Polubienia
7
Ocena
0
P
PrintablesSmika

JST Protection AIO15 Kayoumini

DO *NOT* SHOVE THIS INTO JST PLUG ITSELF. This fits in the space between the frame and the outside of the plug

Pobrania
30
Polubienia
3
Ocena
0
P
PrintablesBarrabajo_

Kayoumini Skadis Holder

This is an Ikea Skadis holder for the tiny but mighty KAYOUMINI. It has 2 hooks so it doesent rotate in the pegboard. I printed it in ELEGOO pla and it only uses 7 grams of filament, so it's an easy and fast print.

Pobrania
28
Polubienia
3
Ocena
0
P
Printablesjsnyder0887

Kayoumini C03 30° Cam Mount

Kayoumini C03 30° Cam Mount w/ Integrated ORT Micro Vee and x14 ELRS antenna mounts. Remix from original. Prints with supports lens down. You will need the 40mm version of the micro vee when using the Happymodel x14 analog AIO. Printer…

Pobrania
27
Polubienia
2
Ocena
0
P
PrintablesGalinette

Kayoumini TPU for Baby Ratel 2 (20 degres) and Vifly Finder Mini

0.4g heavier than stock baby ratel 2 tpu The buzzer itself adds another 2.7g

Pobrania
26
Polubienia
4
Ocena
0
P
PrintablesGalinette

KayouMini Camera TPU Print Support

I was bored of difficulty to support the KayouMini camera TPU prints. So I made this little manual support that needs to be inserted mid print at Z=4.20mm It allows perfect no support printing of camera TPUs. Print the support in PLA,…

Pobrania
25
Polubienia
4
Ocena
0
P
Printableslukefpv

Kayoumini Canopy for O4 C03 LensMod

Kayoumini Canopy for O4 lite with Betafpv's C03 lens mod. Print in TPU

Pobrania
25
Polubienia
0
Ocena
5
P
Printableslymm

Kayoumini Case 8 battery version

This is a storage box designed for the Kayoumini , featuring an upper holder that can secure up to 8 batteries . The design was made using Flywoo Explorer 420mAh HV 2S 80C batteries , but other batteries with similar dimensions may fit as…

Pobrania
24
Polubienia
4
Ocena
0
P
Printablesshaks

Kayoumini baby ratel runcam thumb pro mount

Salut a tous !!! Voici une version du kayoumini où vous pouvez rajouter une Runcam thumb pro Poids: babyratel 30° (3.05g) + runcam mount = 4.89g Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu

Pobrania
23
Polubienia
7
Ocena
0
P
PrintablesBash FPV

Kayoumini Runcam Split 3 Light

Kayoumini Runcam Split 3 Light Category: 3D Printing

Pobrania
23
Polubienia
0
Ocena
0
P
Printablesrady fpv

protection micro usb kayoumini

for extra protection

Pobrania
22
Polubienia
2
Ocena
0
P
Printablesshaks

Kayoumini baby ratel runcam thumb pro naked hard mount

Salut a tous !!! Voici une version du kayoumini où vous pouvez rajouter une Runcam thumb pro v2 naked Kayoumini baby ratel runcam thumb pro naked hard mount tilt 30° "NEW" : support tpu pour la Runcam thumpro v1 Paramètre d'impression:…

Pobrania
21
Polubienia
9
Ocena
0

Kayoumini Canopy with fin

The model is available in STL, 3MF, STEP and f3d

Pobrania
21
Polubienia
3
Ocena
0
P
PrintablesHidde3D

Kayoumini Arm Protector Heavy 11xx Taller Version

Information This is a taller version of the heavy bumper made by Kayou Frames. I modified the design because the bottom of the bumpers were at the same height as the bottom of the screws so I you want to do a few cool skids you'll damage…

Pobrania
20
Polubienia
2
Ocena
0
P
PrintablesMiroslav Iska

kayoumini_battstrap_XT30

Reinforced orig Design, added more functions

Pobrania
19
Polubienia
2
Ocena
0
P
PrintablesDoom Hammer

8mm Backpack for Kayoumini

Just used the backpack from the official Kayoumini and merged it with the geprc xt30 and antenna mount. There are two versions, one that has 8mm standoffs and xt30, and one that is 1.5mm shorter to give room for running the power leads…

Pobrania
19
Polubienia
0
Ocena
0
P
PrintablesRickfpv

Kayoumini support vifly mini et antenne O4

Voici 2 supports pour le Kayoumini * un support pour vifly mini * un support pour l'antenne du O4 Les deux supports se montent sur la bottom plate et peuvent accueillir une lipo 2S 450mah

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesMrWhite

Kayoumini - DJI O4 with O3 lens mod

Here are a few camera mounts for the DJI O4, modified to work with the O3 wide-angle lens. The mounts were actually designed for my own frame, which you can find here. The camera housing should be compatible with the Kayoumini. I recently…

Pobrania
15
Polubienia
7
Ocena
0
P
PrintablesCL.fpv

Kayoumini OG Runcam Thumb Mount.

Use TPU. Generic print settings with .4mm nozzle.

Pobrania
12
Polubienia
6
Ocena
0
P
Printablesjsnyder0887

Kayoumini BT3.0 Mount

BetaFPV RA BT 3.0 connector mount for Kayoumini. Prints with supports. Tight fit all around.

Pobrania
12
Polubienia
2
Ocena
0
P
PrintablesMrWhite

Kayoumini - Walksnail Avatar Nano Cam holder

Here are a few camera mounts for the Walksnail Nano & Mini 1S Cam. The mounts were actually designed for my own frame, which you can find here. The camera housing should be compatible with the Kayoumini. I recently bought some eSUN TPU…

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesSondre Hetland

Proto25 XT30, Buzzer and VTX antenna mount - Kayoumini Alternative

The Design This is a two-part design, with the VTX antenna holder separated from the buzzer and XT30 mount. This makes the parts easier to print and gives you more flexibility. The buzzer mount is designed for a 9mm buzzer. The Build…

Pobrania
6
Polubienia
1
Ocena
0

Minibyte 25/ Kayoumini backpack for xt30, vtx antena, capacitor and buzzer 9mm

Minibyte 25 drone backpack for xt30, vtx antena and capacitor

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesDimeus

Kayoumini O4 Wide + GPS goku gm10 nano

Kayoumini o4 wide mount with added slot for the goku gm10 nano (should fit gps of the same size too) 💵 If you want custom 3d models of basically anything cheap, contact me on discord : _dimeus

Pobrania
2
Polubienia
2
Ocena
0
P
Printables

kayoumini old back pack

tadam les print soidixsant inutile de rady

P
Printables

Kayoumini 2.5" Travel Case

Print in rigid filament (PLA, PETG etc). Total plastic required is ≈140g. Additional hardware required : 6x2mm Magnets 1.75mm Standard filament (PLA, PETG, Whatever) for the hinge. Hinge and magnets are mounted as shown : Use cyano glue…

P
Printables

KayouMini 2 Antenna BackPack 12mm Standoffs

Remix of the backpack for my two antennas, space for wires underneath and antennas up top.

P
Printables

JST Protection AIO15 Kayoumini

DO *NOT* SHOVE THIS INTO JST PLUG ITSELF. This fits in the space between the frame and the outside of the plug

P
Printables

Stronger Kayoumini TPU Battery Straps + Cable holder + Balance Plug holder

Added another layer to the original design to hold the individual Battery strap strongly in place - minimizing potential damage to the FC/O4 air unit during a crash. Added a version that holds the XT30 cable firmly in place, away from the…

P
Printables

Kayoumini 2.5 Flywoo O4 Wide Lens Mount (for the Kit / Camera)

Update 08.02.2026 noticed that you can't flip the video feed in the goggles anymore. So cam needs to be rotated 180 degrees and therefore the "backplate" needed changes 15, 25 and 35 degree mount for Kayoumini 2.5 and the Flywoo O4 Wide…

P
Printables

Kayoumini Canopy for O4 C03 LensMod

Kayoumini Canopy for O4 lite with Betafpv's C03 lens mod. Print in TPU

P
Printables

Kayoumini Travel Case Easy Print Variations

Simplified and easy to print Kayoumini Travel case with and without magnet insets. Additional Hardware required for magnet case versions: 6x2mm Magnets 1.75mm Standard filament (PLA, PETG, Whatever) for the hinge. Attention Designed for…

P
Printables

Kayoumini Case 6 battery version

This is a storage box designed for the Kayoumini , featuring an upper holder that can secure up to 6 batteries . The design was made using Flywoo Explorer 420mAh HV 2S 80C batteries , but other batteries with similar dimensions may fit as…

P
Printables

Kayoumini 25deg Frontend for the O3 Lens Mod on the DJI O4 *Flywoo ND filters version*

You can use the flywoo o3 lite nd filters with your o3 lens mod (dji o4 lite). For 12mm standoffs / 25 degrees of tilt

P
Printables

Lighter Kayoumini 2.5 Flywoo O4 Wide Lens Mount (for the Kit / Camera)

Reduced weight of @mosch_3121698 's design by +1 gram. Adapted to 15mm standoffs. 25 degrees only.

P
Printables

Kayoumini 2.5 XT30, DJI O4 antenna and ELRS holder

Kayoumini 2.5 XT30, DJI O4 antenna and ELRS holder

P
Printables

Kayoumini 2.5" backpack

Kayoumini 2.5" backpack housing XT30, default DJI O4 antenna and TBS Tracer Immortal T (I believe it has 80mm cable). For 15 x 4mm standoffs. Slightly larger version of "kayou_ass_xt30_90d_fixed" with XT30 removable without soldering and…

P
Printables

Kayoumini OG Runcam Thumb Mount.

Use TPU. Generic print settings with .4mm nozzle.

P
Printables

Kayoumini BT3.0 Mount

BetaFPV RA BT 3.0 connector mount for Kayoumini. Prints with supports. Tight fit all around.

P
Printables

Kayoumini C03 30° Cam Mount

Kayoumini C03 30° Cam Mount w/ Integrated ORT Micro Vee and x14 ELRS antenna mounts. Remix from original. Prints with supports lens down. You will need the 40mm version of the micro vee when using the Happymodel x14 analog AIO. Printer…

P
Printables

Kayoumini 2.5" - TPU Collection

This page is a Wiki regrouping all the necessary informations about 3D Printable TPU Files for the Kayoumini 2.5" . All of the .stl files are available in the “Files” tab. Kayoumini 2.5" Starter Pack - All you need to know Recommended…