3433 modeli
! Commercial use prohibited ! If you want to use it elsewhere than on Printables, contact me to purchase a license. ______________________________________________________________________________________________________________ Don't…
Sometimes I like to try out an idea in 3D printing even though I think it may not be the best choice for a particular application, because it helps me to test the limits of what is possible. With that in mind, I can say that these key-cap…
Simple 4 piece mechanical keyboard stand used to showcase 3 keyboards. Assembly Print two links and two side then assemble them together, each part should fit snugly but do not require huge amount of force to do so. If the pieces do not…
all available raisers had angles that were too wide for my liking. So I made one, it connects to the keyboard via slide rails, you can also flip it over to keep the keyboard upright when not in use. Tilt the pieces towards the inside, as…
Sturdy stand for even heavy keyboards so you can display them in a minimum of space. Optimized as much as possible to balance sturdiness with printing speed. These can also work to display anything else that would fit such as pictures,…
Sturdy stand for even heavy keyboards so you can display them in a minimum of space. Optimized as much as possible to balance sturdiness with printing speed. These will also work to display anything else that would fit like pictures,…
The idea of this switch tester is to have one with the sides closed, as on a normal keyboard most sides of the case will be closed. As the switch tester I've found online have open sides and that this might change the sound the switch…
I have seen some people in the mechanical keyboard community storing their boards on a SKÅDIS and it inspired me to create this solution to store my Apple Magic keyboard and Magic Trackpad when not in use. I designed the holder to fit…
Just a fun little fidget that just requires a mechanical switch and a keycap. Had a lot of fun making it and it is now a permanent part of my desk. Thanks for checking it out, and happy printing :)
Since I've got two keyboards on my desk (one suits best for gaming, the other one for hours of typing), I wanted to clear my tabletop or at least organise it in some way. I found some keyboardholders, but in fact they were just too bulky.…
Print Tips The normal size version should be fine for most average keyboards. Can add two small (10mm diameter) helper discs to the model in the slicer (as shown in the attached 3mf file) so we can be more relaxed about printing.…
Hi, I made a wrist rest for my mechanical keyboard at work. I didn't want to buy a new wooden one for 20€ or more. I printed mine in PLA with two colors. The openscad file is also available. So you can change the form, lenth and depth as…
This is mostly another "can it be done?" print with limited utility, but perhaps someone else can use it, so no harm putting it out there. As the print name shows, these are key caps for a Logitech K520 keyboard. Unfortunately there is…
Simple remix with joined parts of https://www.printables.com/model/73423-logitech-g915815-vertical-keyboard-stand Update 11/11: I also recently purchased an Apple Magic Keyboard 2, the fit isn't perfect but it works well
Hi! This submission is the result of my need to free desk space and lower the keyboard height as the desk is too tall for me. I spent over an hour looking for sliding keyboard trays and none met my needs/wants. Features: Big enough to…
For a few years now, I've wanted to design a 3D printable keyboard case… Now, with the XL I finally have the build volume to manage it! I designed this fully 3D printable case as a replacement for the basic one that comes with the…
Replacement Keyboard Foot for Microsoft Natural Ergonomic 4000 Keyboard ( KU - 0462) . I had an old computer which I refurbished to donate. Used my printer to replace the broken feet of the keyboard with a designed new one, because I…
This print is perfect for displaying your mechanical keyboards. It's available in a single, double, and triple keyboard configuration. The design is inspired by the KeebMonkey Acrylic Keyboard Display Stand . Depending on your printer's…
Apple Magic Keyboard and Trackpad Desk Stand V1
A travel case for the piantor keyboards. It utilizes the base as covers and sandwiches them on the outside. I've added multiple versions for those that have tall key caps. They are measured from the point the bottom cover height ends,…
Logitech MX Keys Desk Mount This is a 3D-printed mount designed to securely hold your Logitech MX Keys on the side of your desk, offering a space-efficient solution for organizing your workspace. Printing Details Support-free 3D printing…
this is my first project. i drew and edited this myself. I hope it helps you as much as it helps me. The print file is the leg for the left side, you have to insert it twice into the slicer and mirror one of them
The Noisy Cricket (Mini Gaming Keyboard) A minimal keyboard with just the basic keys for gaming on the go. Mostly targeted at FPS games with a focus on W A S D . The layout can be customized via the QMK firmware. The default layout looks…
Designed based on measurements taken from GK540. Confirmed to also fit GK550 (thanks @jotde3_1830094 ). Don't know if it will fit other SPC Gear models. If you happen to try, please share your feedback. The anti-slip pad was taken from…
Snap-on pen holder for Logitech mxkeys and craft keyboards. It fits a mechanical pencil well and a Sharpie should hold well, but it does not fit as well as a thinner pen.
Simple plantilla para piano o teclado para poder apuntar melodias cuando lo necesites , se a impreso en PLA Winkle negro , disfrute imprimiendolo y modificandolo a su gusto . Simple template for piano or keyboard to be able to write down…
This is a manual Windows key lock I designed for my Glorious GMMK. I designed this because most of the key cap locks you can buy require you to remove the keycap to install or remove them; and I wanted something that be installed or…
This is replacement parts for a Kawai FS750 white keys. This is one section. Made it gray, didn't have any white PLA. This is not perfect but it is working.
Ножка для клавиатуры Logitech Deluxe 250 Leg для клавиатуры Logitech Deluxe 250. Обе ноги зеркальные. На одном столе. Печатайте с опорой со стола.
Fits well. Could use some tightening on the vertical by a few mm. https://www.3dprintlog.com/prints/264099 https://www.tinkercad.com/things/5WkBTqhKpWe-3-key-wknob-macro-keycase
Ножка для клавиатуры Zalman ZM-K200M. Смоделирована по оставшейся целой, со всеми выступами и углублениями. Работает как и оригинальная с щелчком. The leg for the Zalman ZM-K200M keyboard. Modeled on the remaining whole, with all the…
The Revolutionary Musical Keyboard and Multi-Function Controller (RMKMC) is a versatile 3D printed model that showcases a unique blend of music, technology, and 3D printing at its finest. It houses 8 keys, each assignable to whatever…
As in the title, it is a 7cm taller stand for Yamaha reface Series Keyboards. It makes it possible to have 2 Yamaha reface Series Keyboards on your Desk, and that you can connect both at the samt time!…
Keyboard Foot Hama Tastatur Fuß für Hama Tastatur
When typing on the computer, I like the keyboard to be tilted. Unfortunately, the legs of this keyboard are too short, and the tilt is therefore small. A simple extension of the keyboard legs solves everything. Print instructions:…
Stecken Sie sich Ihre Wunsch-Zahnstangengetriebe zusammen. Anwendungs-Beispiele hier: Mein selbstfahrender höhenverstellbarer kompakt zusammenfaltbarer Keyboardständer mit Subwoover Satellitenboxen! Die leichteren Komponenten sind für…
Got a new keyboard did not like the height of the legs so i quickly designed some new legs, double the height. i made custom support on the round thing that goes in the keyboard that need to be snipped off with flush cutters or a file.
This snap-on piece works to hold the bolts in place on any of the K&M clamping accessories, such as the 18807 Universal Holder and the 18815 Laptop Holder , that work with the Omega style or table style keyboard stands. If you have ever…
IKEA PAX Side Hooks – Convenient Keyboard Storage Solution Maximize the functionality of your IKEA PAX wardrobe with these custom-designed side hooks! Perfect for hanging keyboards, headphones, or other accessories, these hooks are a…
Three parts dust cover for apple keyboard - A1243. Anti Dust Guard Cap. Parts are symmetrical - L - left, R - right and M - middle - you need to print all of them. Could be printed in PLA or PETG. Perimeters - best option 4. Light version…
Caution there a different sizes of those legs. Mine was 20mm wide and 26mm long.
When cleaning the keyboard, one plunger broke off because the plastic was brittle, so I designed a new one. Printed in PLA with 0.1mm layer height. Just press the part2 into part1 and you are good to go. For me it is a tight fit so didn't…
This adapter allows for using a 5 Generation iPad with a Bluetooth keyboard designed for an iPad 2. This adapter receives the iPad 5th Generation and mimics the shape of the edge of an iPad2 so that the iPad 2 can be placed in a Bluetooth…
2 styles of keyboard feet. Modeled to replace broken or lost ones. (Check keyboard for proper fit)
Lost one foot for the Hama K210 Keyboard - so I made two new ones. The slot with for the foot is approx 18mm In case this is useful for you please leave a like
This keyboard backplate fits the original T-Deck Plus case. You will need to extend the cable coming out of the speaker, you can then route it through the same hole as the flex cable for the keyboard. For holding the keyboard in place I'm…
Meant to hold cables so it doesn't have to bend too much and ruin the cable
To be clear, I don't intend to type underneath this, it's only for the cat. I'm using an external keyboard. Shown printed in Prusament Army Green PLA: good for keeping it bendy, which my cat finds unsettling to step on. Hopefully this can…
This cat paw-shaped stress-relief clicker features a 3D-printable spring , allowing use without a keyboard switch. However, we strongly recommend adding a keyboard switch for optimal clicking performance and tactile feedback. Key…
This is a fun little clicker toy for you to enjoy! Please like and boost this project. Thank you. Happy Clicking. For Custom Keycaps: 1. Download the Model and import it into your slicer 2. Add another blank print plate 3. Click and drag…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Epic Charizard-inspired keycap for custom keyboards.…
Models TrashiStand Default keyboard stand (main model) TrashiStand XL Same size but with small feet in front to support top-heavy keyboards (e.g. Model M) TrashiStand Mini Stand to display your Artisan collection. Now published as its own…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial licenseL https://www.patreon.com/cw/MonsieurPierre Spooky Gengar-inspired keycap. Compatible with Cherry MX…
Crkbd / Corne case compatible with v2 and v3 hotswap PCBs and fr4 switch plates. Builds pictured in this thing were purchased from 42keebs (the kit includes pcbs, trrs jacks, reset switches, diodes and hotswap sockets, top and bottom…
This keyboard clicker fidget is a compact, satisfying fidget toy designed to replicate the feel of a mechanical keyboard keypress. Perfect for stress relief, focus, or just something to click while working. This model prints quickly (≈25…
A 3D printable Keyboard Stand for the Ikea Skadis Pegboard. It allows you to securely display your Keyboard on the pegboard. The stand was specifically designed for 40% (or smaller) keyboards but has been proven to also work for bigger…
Printed mine in ABS with 3 walls and 20% infill, but I'm sure PLA and less infill would work just fine. I used these keycaps https://www.printables.com/model/399607-complete-cherry-mx-stem-keycap-set-optimized-for-3 Edit: Added V2 with…
I love Prusa signature color orange, black and gray. Inspired by these colors, I designed a Prusa-style mechanical keyboard. I also shared the Arduino code so that if you had a 3D printer, you could easily make a mechanical keyboard. All…
Tolerances will be tight but it works fine for me, if you encounter any compatibility problems leave feedback and I will adjust the model. I also provide two different versions so you can pick the handle type that you prefer. Version 2…
UPDATE Aug 26: Now with versions for split keyboards, putting them on stacked, like in this remix: https://www.printables.com/model/339257-skadis-pegboard-keyboard-holder - with and without hooks and different lengths. - Only in the round…
YouTube video: This is a keyboard holder. It holds keyboards and it does it well. I made it to fit my 60-65-75% boards but not all boards will fit, I'm working on a 80% version now. (available as experimental) I feel like we need more…
share your opinion in the comments!
A keyboard switch model that I decided to upload from my old blender project. Almost 1:1 scale.
Required hardware: 1x Cherry MX switch or compatible alternative, bonus points for clicky Assembly instructions: Print both parts Insert the switch into the main body When connecting the plant/back to the switch, be very careful to align…
Assembly video: Update: Version 2 Added. Most people with a well-dialed in printer should use this new version. This Minecraft Creeper fidget toy uses a Cherry MX keyboard switch, or similar (I’m using a cheap Outemu Clicky Green switch…
Do you like this 3D printable design? Want more exclusive low-poly models? Join my Printables Club! 🎁 New exclusive models every month 💸 Sell 3D prints of my designs 👀 Behind the scenes content You can alternatively join my Thangs and…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Happy Pikachu-inspired keycap for mechanical keyboards.…
A stand to display your mechanical keyboards. Since the left and right stand are identical the print file only contains one. Simply print two for a full set. Displays keyboards at a 60 degree angle Supports keyboards with up to a 2.5cm…
Remix of the OEM cap generator. Credit goes to DesignersMind. If you have a 65% of 75% keyboard, then you'll know how difficult it is to find a cheap keycap set with 1.75u shift key. I've included their original file and a file that I've…
A basic case for the corne , with added hexagonal holes in the bottom to make it lighter and faster to print while allowing the PCB underglow to shine a little better. The mouting holes are in the standard position. The holes may be…
Please check out the assembly tutorial for this project: Update 10/31/2022: Added ISO layout plate version. This keyboard is a revision of a 3D printed Keyboard originally designed my Thingiverse user Fumbucker:…
Inspired by the flowing lines of muzi's H1 case , my case allows for the following components to be used in your Meshtastic setup: BME280 module for reporting temperature, humidity, pressure, air quality, ... Buzzer for audible…
Official Reference CAD Envelopes for Logitech Keyboards Provided as part of Logitech’s Adaptive & Accessibility Initiative , this package contains simplified 3D reference models (dummy CAD envelopes) for three of our flagship keyboards:…
KEYBOARD OR TABLET STAND 14 Sept 2024 - New design available :- Desktop Tablet Stand and Organiser by Peter Martin | Download free STL model | Printables.com Decided to design a keyboard stand, a few iterations later this is the result. I…
Stand to display your custom mechanical keyboards. Purchase printed design on my Etsy store: https://www.etsy.com/listing/1227533573/custom-keyboard-stand-colors-in
This is my take on the holy60 case from kbdfans. I wanted to build a keyboard with this case but thought the price was pretty high. So, I thought I could recreate it to be 3d printable. The main CAD file is unsplit, but to fit on most…
A rework of the Skadis 40% Keyboard Stand to fit 75% and larger keyboards due to the original being too small for them and having them rest on the pegboard instead. Changed to a bit more rounded aesthetic and an inclination of 10%. Use…
Hi I made adictive FIDGET KEYBOARD !! NO SUPPORT NEEDED!!! ITS Fully 3D PRINTED !! NO MECHANICAL PARTS NEEDED!!! The Lube or oil are optional you can use oil from your printer!l!! You can little bit stretch the spring for more resistance…
I wanted a wall mount set for my mechanical keyboards to: get them off my desk, display them for all to see, fill in some very sad open space on my wall. I screwed them into the wall with 1 1/2 in drywall screws, that's it. They're…
Description Keyboard stand, with an optimal ergonomic angle design, very comfortable for long-term use without wrist pain. Keyboard Stand with Upright Mode — Significantly Saves Desk Space Dual-Mode Keyboard Stand (Vertical & Horizontal)…
This print allows you to put cherry profile keycaps onto a membrane keyboard. There are two files, one with and one without the “nub”. The mechanical keyboard I have, Razer Ornata Chroma, has a mechanical aspect to it, so the nub is…
Generated main body using https://www.thingiverse.com/thing:4120804 and then modified the design to turn it into a keychain.
I designed this set of wrist rests for your Keyboard and Mouse. The keyboard wrist rest is designed as a split pair. I tend to swap out my keyboards between several different styles (standard, split, Alice, etc.) so having a wrist rest…
The model can be printed with PLA or PETG, the orientation is clear, no supports are required. Layer thickness of .2 mm is suggested, with 3 lines for the walls. The infill is not relevant because the thickness is a little more than 2 mm,…
Keyboard Switch Fidget V2 — Bigger, Better, Quieter to print The satisfying clicky fidget is back, rebuilt from scratch. If you've seen (or printed) the original Keyboard Switch Fidget , you know the concept: a palm-sized 3D printed body…
Remix of the original model so the key cap can fit gateron stem types
I created a slanted keyboard stand aimed at reducing the stress associated with keyboard input tasks. Using this model, you can achieve an approximate 22° incline for your keyboard. Personally, I have found it increases comfort. Both…
This is just a simple keychain where you can place your mechanical keyboard switch. I use it to fidget sometimes. I made this using Fusion 360. Edit 2022 April 26: Fixed the 1slot keychain for being too loose. Edit 2024 April 28: Added 3…
I designed this 3D printable swing-out keyboard tray support to make the Logitech MX Mechanical Keyboard easier to position and access, especially for users who may have difficulty reaching a keyboard placed on top of a desk. The…
Keyboard Wall Mount Hooks designed to be used with 3M Large Command Strips. Each design has a small lip around the command strip above and to the outside. Works great. Print instructions Printed on Prusa Mini with 0.2mm layer height and…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Sleepy Snorlax-themed keycap. Compatible with MX…
Was absolutely stunned by @Druz320 Canoe inspired SMOLBOAT case. I had to have it...but it was for ortho keyboards, too large to print, and I wanted to use my teensy mount as well as other things I learned from my previous keyboards.…
This is a great fidget toy for all ages just print this model and grab some keyboard switches and Keycaps (printable) and start to enjoy. A great gift for travelers as it can be used as a keychain.
The model is a simple, pleasant to hold ring. It's designed to hold a mechanical keyboard switch, giving flexibility in clicky-ness and feel of the keycap (optional). It can be used to fidget with in many different ways, and is easy and…
Fidget toy using 6 keyboard mechanical switches. I tried Cherry and Gateron switches and both brand swiches fit perfectly. Printing with supports is recommend for best results. It can also be printed facing one of the cube corners on the…
The top eggshell will snap onto the top of the chick so it stays put while you have fun clicking! Fidget with or without the eggshell on top. Parts needed - MX Style Mechanical Keyboard switch Print with supports on auto, all in the…
This uses two mechanical keyboard switches to make a moving shulker fidget toy. The box in the picture is fully open, and upon pressing the top, it closes fully and bounces back. Very fun to play with and a fun desk ornament or fidget…
More often than not I would find that my keyboard is taking up valuable desk space while painting. Finally got around to making this quick little under-desk mount so I can quickly tuck it away within arms reach when not needed. Currently…
