185 modeli
We all know it: We do our weekly grocery shopping, forgot a shopping cart chip and do not have any suitable coins. This shopping cart chip is combined with a key fob so you always carry it with you (as long as you don't forget your keys…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Following on from the English flag keyfob design, here is one of similar size for the Scottish flag of St Andrew (the Scottish national flag). This one can obviously also be used for any flag which has a similar layout but different…
Wydruk około 0,30 €–0,36 € nettoWstępna wycena jednego wariantu
Thanks to Splemsby for the original keychain model. It's a clean model and an easy print, feels good in the hand, just what I was looking for. Retro hotel keyfob / keychain with a blank face so you can add your own design. You can use 3D…
Print .1, 100 percent infill, full supports
Like this? Buy me a Coffee here :D https://www.buymeacoffee.com/iamburny Perfect for a last minute Xmas gift, or for the man or woman who has everything, I'm pretty sure they don't have one of these! [17-05-2017] Updated to support up to…
This is a very tight fitting case with very little tolerance. Minor trimming with a xacto knife might be necessary, especially around the “rim” on the back when snapping it into the front. The 100mAh battery does not take all the space,…
Lexus KeyFob model Best made in petg and a solid print so it will be strong and not break. Like my work ? Buy me a coffee ….. Thanks Click here
This is a case of sorts for Jeep, Dodge, and Chrysler keyfobs. The keychain loop broke on my family members' keyfob so I made a version that would work as a case. The only extra “work” necessary would be to sand down the original keychain…
Overhead holder for one BMW keyfob from around 2008-2012 secured with four screws scaling it up or down in the slicer by 1-5% might be necessary due to shrinkage depending on the material you use might be printable without support after…
I used PLA+ with 0.12mm layers and 0.4mm nozzle. No support or adhesion. Any infill fine. This is my less-used plip so I didn't bother doing much tidying up on the top of the buttons, just a bit of light sanding and polishing, so the…
This is a simple keyfob shape of a heart. Originally made for the Kokoomus party (Finland) as an merchandise. Approximately 50mm wide and 45mm tall. You can fit 20-30mm keyring in it.
A key fob of the Silverstone racetrack in the UK, at which Formula 1 races. The size is variable. Simply adjust it during slicing to fit your needs. Print Settings: Supports: no Raft: doesn't matter Infill: doesn't matter layer thickness:…
A couple of Jerusalem Cross keyfobs I made up. Enjoy. Category: Keychains
Commit those sexy OSHA violations in style with this key. Make sure to wear those safety squints when using it. But honestly dont blame me for any accidents/dismemberment or deadly accidents resulting from its use. Make sure to post it on…
Remixed Steveisbig's "Keyforge Sliding Deck box". https://www.thingiverse.com/thing:3229212 Opened up a hole in the lid so you can see the whole Archon. Opened up a hole in the back so you can see the deck card list there if you prefer…
Because I couldn't find anything like that here on the internet, I decided make one on my own. Feel free to print it! Measurements: Ø 37.8mm Height: 4mm Notes: Sliced it with Cura 4.0 and used the ChangeAtZHeight PostProcessingPlugin to…
Requires 2x M3 10-12mm screws and 2x M3 hex nuts. Recommend to print parts in PETG, ABS, etc. so they don't melt in your car. Print Knuckle with supports, see screenshot for recommended print orientation. Glue Socket to back of Magsafe…
Cat Shaped RFID Tag Keyfob Case Keychain - 25mm 125kHz This is a simple model I made for attaching a 25mm adhesive-backed RFID tag to a key chain. I used these T5577 125kHz tags from AliExpress and configured them with a Proxmark3 Easy…
Basic model of a HID Prox ProxKey III Keyfob. 20% infill with no supports.
My friend has a 2012 Toyota Corolla, and his Keyfob exploded. He reached out, and a short time later, I found a model on Thingiverse. I printed it but disliked how we couldn't find actual hardware or how some of the tolerances weren't the…
It has only 3 pieces: house 1: pleace the motherboard in this part from side house 2: place the Cr 2032 battery and the small magnet (?) part from your original key. phisical_key_2: remove your key from the original key plastic part and…
This is a customizable keyfob (you can change license plate number and font size in the .scad file). It is remixed from "VW Logo Key Fob" by Andreas G, and "Coins for the shopping trolley" by SHR3D.eu (thanks guys!). The logo disc is…
Over-engineered Apple Airtag keyfob/ring. Designed for use with a 30 mm keyring (others will still fit) I left one side open (the white side of the Airtag) so the pinging sound gets less muffled. Parts needed: 5 x M2x6 Socket head bolts…
These are alternative game tokens for the famous card game Keyforge. These are assemblable forged key tokens and Æmber tokens that can be inserted into the keys (instead of just turning the key token over as in the original cardboard…
Use the smallest nozzle you can to print these, ideally 0.25mm or 0.2mm Added some models for larger buttons for keyfobbs that may fit better. If you find the button is not pressing (I did not experience this issue myself) you can likely…
A Plaque and a keyfob featuring the famous Blue Peter TV programme logo. As you can see, I'm the proud owner of a Blue Peter badge. :) I've included the colour change .gcode created in PrusaSlicer. Print instructions Category: Keychains…
If you have an old Lexus or Toyota with the three button keyfob you are probably well aware that these don’t last as long as the cars do and they probably look like this: In my redesign I took the opportunity to add some icons to improve…
No idea if it works, I can't validate the original design which I've remixed, as this isn't for me personally. Hopefully someone posts a make to validate it with the fob internals installed. Original author used CC4.0 Attribution…
This model is a keyfob with a caddy token replacing a 1 euro coin. It is in two parts and uses exactly 1m of PLA filament. Print instructions : PLA 0.15mm no supports 15% filling Print duration : 30mn
Building the scad file requires the https://www.printables.com/model/396183-openscad-honeycomb-storage-wall-insert-module library.
The original TPU cover worked great for several years, but has been delaminating on me. Since the local shops are all out of TPU, and I'm impatient, I remixed it to work with regular PLA, and just screw together with m3 caphead screws.…
Repurpose your starter box into the ultimate KeyForge Battle Chest! This organizer fits within the starter box and holds 9 sleeved and boxed decks along with all of the pack-ins for two full starter sets (so 4 players total) so you can…
partial dovetails allow for endcap to be slid away from the buttons partially, then the key can be removed by pulling the end cap out. Will require support material.
I created this print so that I could make my own deck boxes for my sleeved decks from the card game Keyforge. The lid stays on with friction, but easily comes off. I created this in OpenSCAD, so I can easily change the size to fit other…
Customized version of http://www.thingiverse.com/thing:834725 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=834725 Instructions Using the following options: Loop_font = Open Sans Extrabold Loop_character…
This is a case to put a 2016 Ford Edge Key fob into. This may work with other fobs, but I haven't tried. The build quality of fords keys are not very great, which led to the back case and key ring hole to break off, so I made this to put…
I designed this and printed a bunch to hand out on RAGBRAI. The design is based on my Bacchetta highracer recumbent bike. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: n/a Filament:…
At work I need to carry around keys to ABB robot arm station, so I decided to make things more interesting with Prusa MK3S+ I have at my desk. Printed with 2 filament changes with Devil Design's Galaxy Red and Galaxy Grey PETG. I modeled…
Keyforge deck box with a semi-locking lid. I wanted a box that had a lid with a top + bottom section instead of a slider. This will also fit sleeved cards. It has the keyforge logo on the other side too
It has happened several times to me that I by accident pressed a button on my Lynk & Co 01 keyfob, resulting in open windows, or the rear hatch to be wide open. I designed this small cover which snugly fits the key to prevent it from…
Keyfob cover for Fidget Clicking Wheel 2.0 by BaGoonN https://www.printables.com/model/231691-fidget-clicking-wheel-20
I used a site - https://imagetostl.com/ to convert the A Team logo to .stl then adjusted the model in PrusaSlicer.
The keyfob should pry apart at the chevron between the key and remote buttons sections of the keyfob. After separating the unit, you may carefully insert the fob remote cap with snug pressure. remove the + screw on the backside of the key…
This is a key fob which can be used instead of Tesla's keycard. Dissolve a Tesla keycard in acetone to retrieve the microchip and its connected antenna. The key fob is hollow and fits the microchip complete with its antenna. Just twist…
Similar to a regular key fob, it features discreet storage with internal capacity for pills or other small items. The internal dimensions are 22 mm in diameter and 5.2 mm in height. The lid is easy to open and close with just a half-twist…
A new series Dr Who Cyberman keyfob in two sizes, 70 mm x 72 mm x 2.5 mm and 52 mm x 54 mm x 2.5 mm I've included the .gcode from PrusaSlicer for the colour changes. Print instructions Category: Keychains Summary A new series Dr Who…
This design is my first attempt at remixing an existing design. This remix of the NTag215 case - NFC_tag_clean design has the following icons: A Cat Goose Tiger Zelda - Triforce Printing note; Paused on the 6th layer for the NFC sticker.…
This is a box for the game Keyforge that I designed. It fits all tokens required during the game and 2 sleeved decks. The tokens, keys and trackers used have been made by these awesome people: Keys by calaverajoe (…
The stock GM Keyfob is painfully thin and weak where it connects to a keyring. Because of this both keyfobs for my wife's H3 have broken over the years. Time to fix this and put a little custom spin on it by branding it with "H3" and…
NOTE: Imported from Thingiverse without updates… The main purpose of the this cover is to allow you to put your keyfob in your pocket (or purse) and not accidentally press the buttons. This is a keyfob cover fits recent…
This is a holster for my secondary Ford keyfob with a clip so I can store it somewhere as a backup. It's sized to snugly fit the 5 button smart key for my mid 2010's car, other similar models should work. I printed this in PETG. You…
Thought it was a good idea to apply some 'power of positive thinking' and make a keyfob with the idea. There are three typeface versions, Balloon Bd BT italic, plain Arial, bold italic and Arial Black italic. Enjoy! Print Settings Printer…
Herewith yet another keyfob, this time the Union Jack, the UK's national flag - and published here just in time for the Queen's 70th Jubilee. This one's been a long time coming, mainly due to the complexity of how to facilitate the…
A key fob of the "Baku City Circuit" racetrack in Azerbaijan, at which Formula 1 races. The size is variable. Simply adjust it during slicing to fit your needs. Print Settings: Supports: no Raft: doesn't matter Infill: doesn't matter…
Original case broke. The dealer wanted something like 30 bucks for a replacement. So here it is. When I searched I didn't found any, that would fit my internals of the remote, so had to model a new one. For multi material import together…
Basic two piece deck box for vase mode printing, sized for keyforge, and fits perfectly in a UltraPro deck box for better organization. I printed with three floors 0.5 thickness( 0.4 nozzle) at 200 degrees.The outer can be printed short…
Model files include a support enforcer object. I highly recommend you use this or another strategy to avoid support generation within the deeper key pocket recess. Import the plate without supports and without key dummy, and split to…
Customized version of http://www.thingiverse.com/thing:834725 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=834725 Instructions Using the following options: center = 33 spacing =…
I don't carry all my Keyforge decks with me. When they are at home they are just sort of piled up on a table. Ever want to display the cool archon art, easily find whatever deck you are looking for, and use minimal materials? Well your…
Slide your Kia EV9 keyfob into this sleeve to prevent or block the buttons from being pressed in your purse or pocket. I print this with the open end facing down. I also used supports for the peak on the inside, but it might not be…
This is a replacement for the bulky keyfob cover on the current MINI keys. It makes them smaller, and this version also has a nice Union Jack flag on it. The flag is created as individual parts, so it can be printed in color.... It should…
The plastic casing of my wife's keyfob had been in rough shape for a while, so I decided to ditch the camo duct tape and reverse engineer and 3D print a replacement. It turned out perfect! I liked the orange but she wanted purple, so I…
Customized version of http://www.thingiverse.com/thing:834725 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=834725 Instructions Using the following options: Loop_y_position = 3 Rotation = 50 Font_name =…
Customized version of https://www.thingiverse.com/thing:834725 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=834725 Instructions Using the following options: Font_name = Chewy Text = LAURA Rotation = 50…
I rarely use my Rivian KeyFob, love the “Phone as a Key” capability instead. I probably pick up my keyfob one or two times a month, and always worry if I can find where I last put it. One way to solve that is to add an AirTag. I printed…
Every time I sit down or bend over or sometimes just take a step near my Prius when I have the keyfob in my pocket, one of the dadgum buttons will get pressed by a fold of cloth and the doors will lock or the alarm will go off, etc. I…
Customized version of http://www.thingiverse.com/thing:834725 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=834725 Instructions Using the following options: height = [8,10,8,10,8,10,8,10,] spacing =…
Customized version of https://www.thingiverse.com/thing:1148986 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1148986 Instructions Using the following options: Font_name = Chewy Text = VEGA Rotation =…
I loved Jourdo2k3's original double sided designs but I wanted to print fewer tokens. The tokens have +1 on one side and +3 on the other. Category: Games
You never know when you might end up in a situation where you wish you had brought some Keyforge tokens and decks with you. Now, you can put your mind at ease with this emergency Keyforge kit. This kit holds tokens for two players, and…
Customized version of http://www.thingiverse.com/thing:834725 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=834725 Instructions Using the following options: Text = LIAM height = [10,8,10,8] twist = -1.5…
No supports, no brims, no rafts. Just print flat and enjoy a super quick print time.
No supports, no brims, no rafts. Just print flat and enjoy a super quick print time.
Rezised the retainer and made the eyelet a little sturdier.
At work I have to carry my badge as well as a Yubikey for logins and a keyfob for door access. I don't like them dangling and making noise as I walk around the office, so I remixed an existing ID card and Yubikey holder to also hold my…
The original keyfob keyring slot is thin and weak and broke very quickly. This case snaps over the original case to provide a beefy keyring slot. This is a very tight fit on purpose. The original keyfob will snap into it with some brute…
Lid wont need supports, the rest might.
Tokens for each of the houses in the KeyForge game. Can be used to keep track of which house is in play, or houses that are banned/required by cards like Control the Weak or Restringutus. Designed to be printed in two colors (insert a…
Instructions: Remove all remaining rubber from the keypad and clean it as much as possible, until it is like in the second photo. Print the body ( opel_keyfob_body.stl ) in soft TPU. You can use two colors to better highlight each key…
printed with 15% infill, no supports PLA. Ad your own text or choose from “xc70, V70 or T6”
This is a basic key fob for Lectric E-bikes 20% in fill
Replacement shell and buttons for a 1996 ISUZU Bighorn SUV. There is a parametric file included that can be opened in Fusion 360, if it is needed to be tweaked into a different fob. It needs the original PCB box, and depending on the…
Renault Clio Key Card Battery Cover Designed in Autodesk Fusion 360 to replace a missing battery cover on a Renault Clio Key Card. Print Settings Printer brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: Dynamic…
A fun little tribute to one of the most popular and influential range of computers in history. Key fob size is 60mm long x 30mm wide x 4mm thick (2-3/8" x 1-1/8" x 5/32"). This thing didn't take long to create. I already had the DXF's…
I was sick and tired of buying yet another RC/Keyfob because I either lost the protection slider again or the buttons which are not raised enough for proper men's hands will not work anymore. So I designed my own which work much better.…
Customized version of http://www.thingiverse.com/thing:1148986 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=1148986 Instructions Using the following options: letter_1_space = 12 letter_2_height = 5…
replacement holder for the original nissan micra k12 model key holder. Note: retainer for key and immobilizer chip does not fit that well, i used superglue to hold it on when assembling my key. the retainer pins are too weak, or not well…
Customized version of http://www.thingiverse.com/thing:834725 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=834725 Instructions Using the following options: Loop_character = O Text = HAYLEY…
I'm reading "Carpenters - The Musical Legacy". So I thought I'd make a keyfob & fridge magnet using the Carpenters logo.
If you are a serious Keyforge player you will end up with a lot of decks. Storing your decks in an organized way is a bit of pain. I've iterated on how to store decks, this is my most recent iteration. The system works like this: To store…
Customized version of http://www.thingiverse.com/thing:834725 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=834725 Instructions Using the following options: Loop_font = Open Sans Extrabold…
This is a re-upload from my Thingiverse page now that I'm locked out of it. Originally published May 09, 2019 to https://www.thingiverse.com/thing:3620079 Summary This is a deck case sized for Keyforge Decks (2.5" x 3.5" x .6"). It has a…
I've been binge watching Time Team DVD's recently, so I though to recreate the logo as a keyfob. I've included the colour change .gcode from Prusa Control. Print instructions Unassociated tags: Time Team Category: Keychains Summary I've…
This is a perfectly sized replacement for the token tray that comes with the "Flip N Tray" from Ultimate Guard. This token tray is designed to hold Keyforge tokens, including keys. Print instructions No supports required.
The keyfob case protects HID iClass keyfobs from being broken or damaged. The keyfobs don't fall out of the case, and it can even prevent partially broken fobs from disintegrating further. I'd recommend printing it using 98A TPU.
Set of tokens for the Keyforge card game. Category: Toy & Game Accessories
With time, the awkward brace inside my fob began to fail, leading to the remote buttons failing one by one. I ordered a replacement housing from Aliexpress and the remote worked again. What I failed to realize was that the PATS chip was…
Printed in PETG at 0.2mm with 15% grid infill.
Did you win a local tournament with an extra special copy of Shock and want to retire it to a place of honor on your mantle? Did you want an extremely intimidating and opulent way to display your archon card to your peasant opponents? Do…
Customized version of http://www.thingiverse.com/thing:834725 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=834725 Instructions Using the following options: Text = LILA Loop_x_position = 12 Loop_font =…
![Silverstone Race Track (Keyfob) [F1]](https://media.printables.com/media/prints/221298/images/2022253_1822b69a-9c30-4014-a0de-c97d1fd1eb40/silverstone-v4.png)
![[HSW] Keyfob Hanger](https://media.printables.com/media/prints/441087/images/3644806_4b987e30-b411-4389-be2a-3d27234b8063/2023-04-02-16-47-14-463.jpg)
![BAKU City Circuit (Keyfob) [F1]](https://media.printables.com/media/prints/221971/images/2030542_a1568560-9c0f-49c3-a3b7-38138087b23e/baku-v2.png)
