180 modeli
Replacement inserts for the Kreg router table. Butcher9_9 Did a great job of modeling the inserts in this model . I slightly tweaked the model he shard to make the hole in the middle a parameter, then generated some extra sizes. Included…
Came across a Kreg ACS Track Saw Blade opening dust cover awhile back, but as I didn't want to pay what they were charging and didn't find a model to print it, I decided to model my own. 3 variants for tolerance. An easy fit variant, a…
Snap-on dust port for the Kreg® K3 K4 K5 series of pocket hole jigs
Kreg router tables and lifts only come with 3 inserts , 2 small and one very large with nothing inbetween. These inserts fill that gap making using intermediate sizes of router bits much easier and safer. No supprt needed though I do…
This right-angle square guide clamps right into the t-tracks under the rails. I've also added an adjustable stop block on the top to prevent tipping. For the clamps, I'm using the Kreg Tool KMA7520 Track Clamps: https://amzn.to/49SCSM9 To…
Printable plugs for Kreg pocket holes alike. 2 versions with/without lip. Note the lip can be a bit transparent, especialy with PLA, which allows better visual integration. Print Settings Printer: Prusa i3, CoreXY Rafts: No Supports: Yes…
My own version of the Kreg Precision Router Table Insert Plate Levelers. The original Kreg has only corner parts, I have added levelers to the sides too for more precise adjustment. Other parts needed: Adjustment screws; M5 screws /…
Router templates for cutting out the insert for router lifts using the standard 9.5mm x 235mm x 298mm or 3⁄8" x 9 1⁄4" x 11 3⁄4" plates such as the: JessEm Mast-R-Lift II (02120, 02123) JessEm Rout-R-Lift II (02310, 02311, 02312, 02313,…
Works with the Irwin quick grip clamp with a 12.7mm x 5mm shaft, but you need to remove the pin from the end of the clamp and flip the handle around. I used a M5x12 hex bolt and it works great. Printed in PETG with at least 4 perimeters…
Description Inspired by EvgenyF's model on Thingiverse , this storage case holds all the accessories for your Kreg pocket hole jig. It includes a snap-together hinged lid with an integrated latch. No longer do you have to go hunting for…
I designed this to fit my Dewalt DCW600 trim router to use on the Kreg Accu-cut track system Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Generic PLA Category: Tools
This is a track saw holder sized for Kreg Accu-Cut rails. The knob rotates down to hold the track in place. Sized for a 5.5in wide track. No supports required; break the knobs loose by turning them or with a flat-blade screwdriver. Built…
I designed this adapter for my Kreg track saw for hooking it up to the Rigid 1-7/8 shop vac. I found a much better solution after that from Rockler but maybe this print will be useful to someone else. It fits the original twist lock…
An additional pin for aligning shelf pin holes. Used to maintain alignment when adding extra holes above the first column. See the video here:
Logos for Kreg, Kobalt, Fisch and Weller If you're looking for a particular logo, let me know and I'll try and get it for you.
Single .stl file printed on AnkerMake M5C with PLA+. Bed 60 and nozzle 210
Adapter to connect your Festool vac to the Kreg 720 pocket hole Jig. I used Petg but might work with PLA. Also added the fusion 360 file in case you want to revise anything easily.
V1 Notes: The threaded latch isn't the best design by far. But it's a quick and dirty solution.
When looking for a pocket hole jig, I had difficulty choosing between the various versions Kreg offers. On the one hand, I wanted the Mini because it is the smallest jig that can get into tight places, and is very cheap. On the other…
Storage for Kreg pocket screw jig tools: Stepped drill bit, stop collar, long and short driver bits, and hex wrench for Gridfinity system. Included are 4U and 6U versions. Also, a 2U tray useful for a little additional storage under the…
This is a storage solution for the Kreg Puck bench dogs. They can be mounted with 3 or 3,5 mm screws to a wall or a french cleat system. I printed it with 0,25 mm layer height and a 0,4 mm nozzle. No support is needed. For the…
Print a test part of the lid first to see if it fits. The tolerances are tight and varies by printer. If it doesn't fit you can either change the XY Size compensation or resize the appropriate axis of the model by a percent.
Update 03.09.2023: Improved "click and clean" ergonomics. Printer brand: Flying Bear Printer: Ghost6 Rafts: No Supports: Yes (only "base" detail) Resolution: 0.2 Infill: 100% Filament brand: Esun Filament color: red, light blue Filament…
The model shows the designed size of the holes. Actual size may vary slightly due to different shrinkage of materials used. Printer brand: Flying Bear Printer: Ghost6 Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament brand:…
remix from https://www.printables.com/model/378625-kreg-accu-cut-garage-door-holder Wanted a true nut and screw. You will need an inch and half ¼ 20 bolt and and a ¼ 20 nut. I also included the knob that I got from 3dprint.help
made this to hold my clamps there are 2 types one for the wall and one for shelf or palment.the bigger one gives clearance from wall. printed with pla+
The Kreg Accu-Cut comes with a saw sled that does not grip the DeWalt DCS565 tight enough. With this print, the it's no longer wobbeling. Designed to align perfectly on the blue guide strip of the Accu-Cut (as the manual suggest, the…
This handy little device screws to the bottom of a Kreg Shelf Pin Jig to raise it up by 64mm (two holes), making all the holes useful. See the Video Here:
This is a niche use case, but maybe someone will find it useful like me for combining two excellent tools to easily and accurately cut shapes from 6 and 12mm MDF. Guide is a two part clamped adapter that fits around the DCS571 base to…
If you want to use your dewalt saw DCS391 or DCS565 with the Kreg Accu-cut, you'll need this adaptor. This is a one-piece base for those who have a big volume printer (minimum 310mm bed) The one-piece is a stronger part than the original…
This is an upgrade to the Kreg Pocket Hole jig. The Kreg device as shown is no longer sold but I am sure that many thousands were sold in the past. It does an impressive job but is cumbersome to use especially when you need to cut…
Simple adapter for connecting the Kreg K5 Pocket hole Jig to a Festool dust collection 27mm hose. May work with new jigs from Kreg. If so please post your findings. Printed using PETG but PLA would also work. .2mm layer height. No supports.
After many years of hard work and living outdoors, the rubber clamp pad on your Kreg K2/K2000/K3/K3MS/K4/K4MS Pocket Hole Jigs will eventually deteriorate and crack to pieces… This part is a direct-fit replacement to be printed out of…
The Kreg Pocket-Hole Jig 310 does not come with a case. This remix fits the 4 components inside with easy removal but minimal slop. Both the bit and jig can be placed with their markers in any position to avoid having to reset every time…
A wall mounted holder for the Kreg Automaxx 76mm wood project clamp. I only have this size of the clamp, but it will probably fit other sizes of the clamp as well. Printed in PLA, infill 40, bottom down with pain-on-supports under the…
This is the same Kreg attachment that comes standard the only change is the Festool dust extraction attachment. Fits on the standard Festool hose - Festool Suction hose D 27x3m-AS-90°/CT (Amazon)
These are clamp pads that slip over the 6" Kreg Automaxx Wood Clamp (https://www.kregtool.com/shop/clamping/clamps/wood-project-clamp---6/KHC6.html) metal clamping surfaces to help reduce marring. They may work with other Kreg clamps, but…
I made this out of necessity when an adapter I ordered online never arrived. Simple remove the vacuum port that comes with the Kreg Foreman and replace it with the two-piece version included here. You can also re-use the two fasteners…
A quick & dirty remix of PwnCNC's Ultimate Festool Cleantec Adapter in order to connect my Kreg 720 pocket hole jig to my Festool CT26. This one is specifically sized for the Festool D27 / 27mm hoses. Prints without support. I recommend…
This is a remix from Xathorron https://www.printables.com/model/261588-kreg-pocket-hole-jig-310-case Its a holder for Kreg pocket hole jig 310 to work with Gridfinity. I ended up designing 2 different models. one is shorter (5u or 38.8mm…
The included Index block in the Kreg Accu-Rip / Cut jig isn't big enough to fit saws under 7 ¼ such as the Milwaukee m18 6 ½ circular saw. This replacement index block is bigger and allows replacement of the saw without having to re-index…
UPDATED: 1) Left more room on Insert 2 for the internal magnets. 2) Added Kreg HD Jig Hold Down(HD_Holder2.stl) I didn't like how my Kreg K5 parts rattled in the wing storage cases so I created some magnetized holders to keep things more…
This is a version of vacuum port adapter for Kreg track saw and Festool dust collector. I bought a version of this adapter on Etsy but it had obvious design flaws …and broke on first use. This design is similar to my earlier version for…
[EN] You can find the description in English below [ES] Tapones para Pocket Hole Estos tapones para pocket hole son la solución ideal para ocultar de manera limpia y profesional los orificios de los tornillos en tus proyectos de…
20.08.2023 Improved ergonomics. Printer brand: Flying Bear Printer: Ghost6 Rafts:No Supports: Yes Resolution: 0.2 Infill: 50% Filament brand: Esun Filament color: blue Filament material: PLA+ Slicer: Ultimaker Cura 5.4.0 Printing…
This is an adjustable base for the Kreg R3 Pocket Hole Jig.
I made this adapter to allow Pittsburgh 11" Locking Pliers (Harbor Freight) to work with a Kreg Jig. The Pittsburgh Locking Pliers cost me just over $5 at HF as opposed to around $20 for the official Kreg Jig clamp. Here's a link to the…
Printer brand: Flying Bear Printer: Ghost6 Rafts:No Supports: No Resolution: 0.1 Infill: 100% Filament brand: Esun Filament color: white Filament material: PETG Slicer: Ultimaker Cura 5.5 Printing temperature: 245 Celsium Build plate: 80…
Track mount for the Kreg ACS Track saw tracks
Printed with no supports. I used PETG but PLA will work. .20mm layer height with 15% infill. (Note: Original STL file was incorrect and has been replaced with the correct STL file.)
This is a remix of ArrowMakes Model of the Kreg Accucut Wall Mount. Redesigned the whole locking mechanism to highly improve rigidity. The printed bolt on the original version was shearing of super easy if a bit overtightened. Got carried…
This print will help you to keep your small Kreg Clamps organized. To mount it uses 2 Hillman's Wall Dog 1-½ inch Hi-Lo Steel Pan-Head Philips Anchors which are found on Amazon and at hardware stores like Home Depot in the United States.
Reducing ring milling machine / Reduzierringe für Kreg Frästische [EN ]Suitable for the milling tables model PRS2100 and PRS1045, as well as for the Kreg mounting plates type PRS4034 and PRS4038 [DE] Geeignet für die Frästische Modell…
This is a template for a router table insert plate. The Fusion360 file is included so you can make a hole the size you n
Hey All, I have the Kreg ACS track saw that doesn't seem to fit any existing track saw accessories including wall mounts. To remedy this I have created my own simple wall mounts. There are two printable parts and they connect together…
If you use either the 27mm or 36mm hoses for your dust vacuums this adapter lets you use either. The stubby design is more direct and I've had better chip extraction compared to the 90 degree design of the original Kreg Jig. Please…
I liked this model, but had the other allen hex wrench version, remixed it to fit this version.
Adapter to attach Ridgid Professional 4 Gal 5 HP Vacuum to Kreg Jig Dust Collector. Internal Diameter for Kreg Jig end - 35.5 mm, for the Ridgid end - 45.5 mm. Made from eSun PETG filament Print instructions Category: Hand Tools Summary…
Dies ist eine Aufbewahrungsbox für Einlegeringe der Kreg Fräsplatte PRS4034/PRS4038. Auch für das Montagewerkzeug ist ein Fach vorgesehen. Die Box wurde in FreeCAD erstellt, die Zeichnungsdatei ist beigefügt. Einlegeringe für die…
T-Slot Nut made for the miter track of my Kreg router. Needs a M6 bolt or nut. As the walls are pretty thin above and beyond the M6, I recommend to print it as orientated in the file (long side down). The thin parts are 0,4mm so you can…
a simple holder for all Triton router TRA001 and Kreg Router plate tools Kreg Plates up to 7 plates Kreg Plates wrench Kreg Starting Pin Table height winder Collet wrench you can print it using any material, PLA, PETG, … print settings…
This is a case to store a Kreg Mini pocket hole jig. A 6" long hex drive Robertson bit can be stored in the lid. The hinges are print-in-place and the magnet dimensions are 8mm diameter by 2.8mm tall. 0.6mm nozzle, 0.3mm layer, PETG,…
This fits a Kreg Adaptive Cutting System (ACS) track. This is the actual Kreg track saw - not the Accu-Cut, which is a jig for a circular saw. If the fit is tight, use some wax, it should slide very smoothly. I rounded the bottom circular…
Update 2.12.22: step-Dateien hochgeladen / step-files uploaded Einlegeringe für Kreg Fräsplatte PRS4034/PRS4038 Im Lieferumfang sind 3 verschieden Einlegringe, die mir nicht ausreichten. Ich habe daher selbst weitere erstellt, darunter…
Dual Kreg Cookie holder, with 4 mountigng holes for standard 3,5mm wood screws. Added a pencil / dowel / drill holder in between, just to fill the space. Finger slot at the bottom to easily lift the entire Cookie stack out of the holder.
Storage Bins to hold Kreg Model 320 Pocket Hole Jig and Accessories. Bins fit Harbor Freight Medium 20-bin Parts Storage Case. The bin for the jig itself is specific to the Model 320 jig. The Bin and tray for the Driver and Drill Bits…
kreg t-track clamp holder, work well, printed with pla+
Saves time measuring everytime you need to drill a pocket hole. A spacer of 1 1/4" on one side and 1/4'' on the other. Simple print took 40 mins at 15% fill. Couldn't find else where so I decided it would be a good first design.
Multiboard mounted friction fit holder for the Kreg Automaxx wood project clamps. Printed with 3 perimeters at 15% infill with PLA and a snug support on the Multiboard friction fit insert
Ein Wandeckregal. My printing settings: I recommend printing in PLA Nozzle: 0,4mm layer height: 0.2 perimeters: 3 infil: 20% no support
Print this awesome Rugged box design customised to perfectly fit your KREG XL pocket hole jig, drill bit & accessories! FITS DOUBLE JIG!! For ideal results print the box halves in ASA/ABS or better. The clips in PETG & the Seal in TPU.…
A simple remix of the Parametric Rugged Box to be able to store all the necessary accessories including the Kreg HD jig in one place. I glued in some magnets to keep the accessories in place and if you want you can place some type of foam…
This is just a bigger knob to turn and tighten the counternut of the Kreg Jig K4. It has a small press fit to stay on the existing nut of the jig.
Cover for the Kreg Jig 320 to collect dust with a CLEANTEC connect. Reuse the Kreg clamp adapter pad to ease positioning. To make sure the connection between the plate and the connector is solid, the in-fill is bumped to 35%. The first…
The original model was designed for the hole spacing of a DeWalt router. This remix alters the holes and support layout for the Ryobi ONE+ 18V compact trim router (PCL424B). This fits the Kreg Accu-Cut saw guide (https://a.co/d/5Sm4oRL).…
The lamp is meant to be mounted on a laptop for video calls but I wanted to use it by itself so I designed a stand for it.
This holder is for the drill bit, long driver bit, short driver bit, and allen wrench for the Kreg pocket hole jig. The drivers are in a raised holder for easier removal. The bin is 4x1x4.
Need a way to use my RRT1600 with my Kreg Accu-Cut XL so I went into Tinkercad. Only printed in PLA at this stage but will be reprinting in ABS as soon as I finish testing. Layer Height: 0.2 Infill: 25% more may be needed. Hardware needed…
Cheap shelf leg protect, Regal Steckregal Obi Have Fun, don´t hesitate to give a like or post a make picture. Open for any improvement ideas.- just send me a message. Category: Household
A wall mount for the IKEA STÄNKREGN STÄNKREGN LED-ringlampe, kan dæmpes/turkis - IKEA , due to the lights light weight the wall mount is based around double-sided tape. The ball-joint is created by @DieZopfe_245259 , link to the file is…
I needed a way to attach a new ring light to my webcam without any non-printed parts and came up with this snap fit mount. It doesn't need to resist much loading outside of the initial assembly, so any material with a bit of flexibility…
EN: Modular 3D Printed Shelf This shelf consists entirely of 3D printed modules and was designed for easy assembly and very high stability. The construction is based on a modular interlocking system that does not rely on individual…
I needed a way to connect my Rockler Dust Right hose to my Kreg K4 dust port. The sweep on the elbow is a bit greater than 90, as the hose only exits from the Kreg jig to the left, and the vacuum is located under my bench to the right.…
I needed a mount to hang my Kreg Accu Cut Track Saw and I couldn't find what I wanted so I desinged my own. I made it out of carbon fiber PLA for stiffness but any material should work just use at least 3 walls and at least 25% or more…
Designed this foot to replace a broken one. I chose to do a cylindrical pad instead of the flat/angled one that came with the project center. I didn't bother with replicating the snap feature because the final parts pressed onto the steel…
Mount for the Kreg Accu Cut Sled. Will only work for the Accu Cut track saw style.
The “Kreg” is a bit indented, so when printing that face down, it doesn't look perfect, but that was from the original design. Also, the latch is kinda hard to close
Bin for a Kreg Pocket Hole Jig R3. Fits a gridfinity grid 2x3.
Need a case to hold all pieces of the Kreg 310 Jig and other files did not provide a good print file.
So you have a Kreg Foreman, but you're worried about losing (or you've already lost) the jig for setting the drill depth stop. Here's a model you can print for a replacement. I printed these in PETG with the holes facing upwards, and I…
Replacement plunger for the Kreg K3 or K4 pocket hole jig. Designed as a slip on replacement.
I wanted a way to store my Kreg jig, and scorpion42's carry case was a good start to build off. My jig kit lives in a drawer in my tool chest and never leaves my shop, so I dropped the case elements in favour of a tray. I also added space…
Ich habe diesen Boden entworfen damit mir das Shampoo etc. nicht ständig umfallen. Durch das schmale Metallgitter am Boden sind zudem auch die Rasierer gerne einmal durchgefallen. Das hat nun ein Ende. Um Schimmel durch stehendes Wasser…
Has space for internal or external pocket hole screws. Designed for 19mm thickness wood. May fork for others. If you print it using layer size equals to ¼ your nozzle diameter you'll need almost no support. Worked without support for me.…
Fit should be snug but still easy enough to remove and place back. Just 2 construction screws is all you need to attach to the spot you desire. Feedback is appreciated
Prípravok na zapustené pánty KREG – upravený pre presné a čisté vŕtanie. Počas 3D tlače je v tele vložené mosadzné puzdro (Ø 12/15 mm, výška 16 mm), ktoré zvyšuje pevnosť a presné vedenie vrtáka bez vôle. Diel je zvýšený, aby bolo možné…
As requested by a Reddit user. No precise dimensions were provided, so the model will most probably require some adjustment. The dimensions are 0.5"×0.23"×6". The hole diameter is 4 mm.
Pack your pocket hole jig and an assortment of screws all into a single Packout Compact Low Profile. I print mine out of PETG with 3 perimeters but PLA works fine as well. No supports are needed except for the two little towers that hold…
This remix just combines the to original files to make one solid Rigid shop-vac attachment. Printed with PETG, 5 walls and 20% infill for durability. If printed at a 45 degree angle, no supports needed.
Just a simple adapter for the kreg jig pro dust collector that works with a standard 1-¼ inch tapered shop vac nozzle.
