P
Printablesnakor
Carpuride GPS holder for KTM 1290 super adventure
3D printed Carpuride GPS holder, with holes for screws and nuts. Steel head bolts 6 hexagonal internal Ø5 x L.20 mm
- Pobrania
- 141
- Polubienia
- 5
- Ocena
- 0
Wyniki wyszukiwania: ktm
387 modeli
P
PrintablesOld Machinist
Alta Redshift Motorcycle KTM Headlight Conversion Parts Kit
These pieces will allow you to run the KTM headlight (I believe the year range is 2017-2022 on this style KTM mask) on Alta motorcycles already using the KTM front fender fitted to the stock Alta triple clamps. Also allows MX and MXR's to…
- Pobrania
- 103
- Polubienia
- 20
- Ocena
- 0
P
PrintablesJorreto
Pie pata de cabra para KTM 390 Adventure
Esta es una ampliación de la base de la pata de cabra de la moto KTM 390 Adventure. Sirve igualmente para la DUKE 390, no se si para otros modelos. He comprobado que las bases de la pata de cabra tienen ligeras diferencias aunque sea el…
- Pobrania
- 52
- Polubienia
- 6
- Ocena
- 0
P
PrintablesLuddi
KTM/LC4 Keychain
Its a Keychain for KTM/LC4 owner. I hope you enjoy it.
- Pobrania
- 27
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSpaghettiFactory
KTM Keychain
Any print settings will work, however to get the best details and print quality use a 0.25mm nozzle, but a 0.4mm nozzle would also work. Change the x and y axis percentage to adjust the size of the KTM keychain to your preference!
- Pobrania
- 2958
- Polubienia
- 313
- Ocena
- 4,91
P
Printablessometimes_erik
Fork Seal Driver Tool - KTM/Husky/GasGas (48mm)
--Updated V2 Available Now!-- Features 3mm alignment pins and better clearance! Use standard nails as alignment pins for more consistent driving. This is a fork seal driving tool for use with 48mm diameter dirt bike forks. This was…
- Pobrania
- 1358
- Polubienia
- 116
- Ocena
- 5
P
Printablestsukworks
Late Model KTM/HQV/GG Chain Tension tool
This tool is handy for quickly setting the tension on late model KTM/Husqvarna/Gas Gas 125-501 dirt bikes that has a specified slack of 55-58mm, measured between the top of the swing arm and the bottom of the chain. Note: this has only…
- Pobrania
- 1108
- Polubienia
- 117
- Ocena
- 5
P
Printablesnbss
KTM 890 Adventure GPS Mount
Created GPS Mount after waiting for KTM Powerparts GPS mount (A61012992044) being on backorder. There are two file versions. One that fits the 890-R windscreen and the other for the S-model windscreen. The S-model version extends out…
- Pobrania
- 1082
- Polubienia
- 41
- Ocena
- 5
P
PrintablesGareth
KTM / Husky / GasGas Threaded Oil Funnel
Threaded oil funnel to fit most 250, 350 & 450 KTM / Husky / Gasgas motocross bikes. The funnel threads directly into your existing oil reservoir for easier oil refills. Air vent integrated into funnel to allow for fast pours with no…
- Pobrania
- 948
- Polubienia
- 103
- Ocena
- 5
P
PrintablesOld Machinist
KTM Husqvarna Gas Gas Motorcycle TPI 2-Stroke Oil Fill Cap Sleeve
Sleeve that slips over the 2-stroke oil fill cap that reduces the build up of dirt to the underside of the cap lessening the chance of dirt being introduced into the oil tank during oil fills. Print simply slides over the top of the cap…
- Pobrania
- 910
- Polubienia
- 44
- Ocena
- 5
P
Printablesredvsgreen
KTM EXC/EXC-F Rear Shock Protector
Protect you KTM rear shock from being worn out by the rear wheel mudguard. I printed it in PETG with 90% and 100% infill. Fit is not 100%, but you should hear it snap when it fits correctly. Lasts probably 10-20h. Maybe more, but I…
- Pobrania
- 765
- Polubienia
- 66
- Ocena
- 5
P
Printablesnitromodel
Sprocket wall Hangers Suzuki, Honda, Kawasaki, KTM, and Yamaha
I made these on my Mini Prusa +. They take about 7 hours to make each. They are about 7" in diameter and 0.300" thick. The Yamaha sprocket will need supports for the name. I will be working on others and will be doing a clock one as well.…
- Pobrania
- 731
- Polubienia
- 106
- Ocena
- 5
P
PrintablesSren232
KTM 690 SMC R Achsschutz hinten / KTM 690 SMC R Axlesliders rear
Montagehinweis Gude, zur Monatge wird nur eine M10 Gewindestange und etwas Kleber benötigt. Zu erst die Gewindestange etwa auf Maß 315mm absägen, die Achsschraube mit einer 32er Nuss lösen und in die Mitte der Achsmutter eine Bohrung mit…
- Pobrania
- 677
- Polubienia
- 48
- Ocena
- 0
P
Printablesbraga3dprint
KTM racing decoration
Introducing the "KTM Racing" Lettering Decoration – a versatile and stylish addition to your space. This 3D model features the iconic "KTM Racing" lettering, making it an ideal choice for KTM enthusiasts or anyone looking to add a sporty…
- Pobrania
- 654
- Polubienia
- 98
- Ocena
- 5
P
PrintablesNMdesertracer
KTM 790/890 Adventure chain slack tool!
KTM 790/890 Adventure chain slack tool! Slide in from the back on the chain buffer till it reaches the front upper chain guard mounting point. It might fit the KTM duke. 38mm is how tall the actual printed part is off the chain guide. If…
- Pobrania
- 644
- Polubienia
- 45
- Ocena
- 5
P
PrintablesJason H
Husqvarna / KTM throttle spacers
Small spacers, two different sizes. Printed mine in ABS and it's been hassle free for three years. Excellent throttle control. Undo your throttle and pop them in. It's that easy.
- Pobrania
- 616
- Polubienia
- 19
- Ocena
- 5
P
Printablesredvsgreen
KTM EXC/EXC-F Front Headlight replacement
Save your original headlights from a crash by using this shield instead. Screws in with the regular screws. Fits EXC/EXC-F 2017 - Present and probably older versions as well. Print without support.
- Pobrania
- 606
- Polubienia
- 46
- Ocena
- 5
P
Printablestsukworks
'17-'23 KTM Headlight Frame for Diode Dynamics LED SSC2
Change Log V3 Lower light bolt hole moved forward to allow for greater range of motion for lower light Reinforced the slot in the frame that interfaces with the lower headlight mount of the headlight mask. V2 Overhangs improved for more…
- Pobrania
- 590
- Polubienia
- 84
- Ocena
- 5
P
Printablesflbdesign
RADIATOR CAP TOOL 23+ KTM/GASGAS/HUSQVARNA
If you have a 23+ KTM, Gas Gas or Husqvarna you know removing the new radiator cap is nearly impossible! Works on all 23+ KTM/GasGas/Husqvarna Austrian bikes. Print in PETG, TPU, ASA 100% infill with backing
- Pobrania
- 547
- Polubienia
- 39
- Ocena
- 5
P
PrintablesJason H
Husqvarna 701 / KTM 690 fork guide
New and improved! Some have asked for one that is chamfered and stronger. So here it is. I've also included the f3d file. -------------------------------------- My 701 had the fork cables banging off the forks. Plus I wanted them off the…
- Pobrania
- 481
- Polubienia
- 37
- Ocena
- 5
P
PrintablesTrotterAccesories
High Fender for KTM 390 Adventure 2020-2024
A base and suspension protectors are included in the files, using good PETG would be sufficient, but it is not a bad idea to use more resistant materials, especially those that are water resistant. Apart from the printed parts, the…
- Pobrania
- 472
- Polubienia
- 21
- Ocena
- 0
P
PrintablesQendrim Berisha
KTM Wheel Bearing Protection Cap
Protects rear wheel bearings and seal rings from mud. Also protects from pressure washers.
- Pobrania
- 464
- Polubienia
- 33
- Ocena
- 5
P
PrintablesDevilscave
KTM Duke GoPro / Osmo Action Cam Mount
Habe hier eine GoPro bzw. DJI Osmo Action Cam Halterung für KTM Motorrädlenker mit 28mm erstellt die in der mitte aber eine 33mm Schale haben. Da speziell bei KTM die untere Lenkerbrücke einen Verbindung um das Lenkerrohr mit anderen…
- Pobrania
- 458
- Polubienia
- 81
- Ocena
- 0
P
Printablesfran González
carpuride mount KTM 790/890 adventure
este es un soporte para w702 de carpuride para montar la pantalla
- Pobrania
- 455
- Polubienia
- 11
- Ocena
- 5
P
PrintablesDarthHeino
Brake Line Guide KTM, Husqvarna, GasGas
I use the brake line guide on my 2018 KTM EXC F450 which is equipped with a navigation tower for rallye racing. It will fit on all bikes with a similar fork. The updated version is short and got an offset in order to get more clearance…
- Pobrania
- 450
- Polubienia
- 43
- Ocena
- 0
P
PrintablesTim Klecka
KTM/Husqvarna Side Stand Base
This is a model to replace a broken or old KTM or Husqvarna side stand base used in enduros (like the EXC) and some motocross bikes. I have uploaded two models, one with a hole in the middle so you can add a standard M8x30 bolt for…
- Pobrania
- 450
- Polubienia
- 43
- Ocena
- 0
P
Printablesnbss
KTM 790/890 Adventure Chain Gauge Tool
Tool to help check chain tension and wear as instructed in the KTM 790/890 Adventure owners manual. The extruded side is 3.5mm thick (middle of the acceptable range 2-5mm) and 25mm wide. The bottom is grooved to check chain wear and…
- Pobrania
- 444
- Polubienia
- 42
- Ocena
- 5
P
PrintablesDovydas Miliauskas
KTM 390 / 790 Adventure Windshield Block
30-40% infill is recommended. Bump up to 4 perimeters as well to fill the walls. Organic supports does make it easier to remove, but regular grid works fine as well. A remix of a model uploaded by Pavel Mironov on Thingiverse. The…
- Pobrania
- 416
- Polubienia
- 13
- Ocena
- 1
P
PrintablesSren232
KTM 690 SMC R Achsschutz vorne / KTM 690 SMC R Axlesliders front
Montagehinweis Gude, zur Monatge wird nur eine M10 Gewindestange und etwas Kleber benötigt. Zu erst die Gewindestange etwa auf Maß 290mm absägen, die Achsschraube mit einer 27er Nuss lösen und in die Mitte der Achsmutter eine Bohrung mit…
- Pobrania
- 406
- Polubienia
- 32
- Ocena
- 0
P
Printablesflbdesign
KTM / Husky / GasGas Oil drain tube
Oil drain tube for KTM Husqvarna Gasgas The thread is M12 x 1.5. Compatibility: All KTM from 2009 All Husqvarna from 2014 All GasGas from 2021 Print in TPU or PETG Instructions: Lay the bike on its side with the drain bolt facing up, the…
- Pobrania
- 399
- Polubienia
- 34
- Ocena
- 0
P
Printables4ndi323
BEST Helmet Holder Helmhalte KTM
Just added an KTM Logo to it ^^
- Pobrania
- 350
- Polubienia
- 50
- Ocena
- 0
P
PrintablesTT_Engineering
KTM Motorrad Schlüsselanhänger
Ich habe hier einen Schlüsselanhänger für KTM Fans entworfen. Die Anhänger können in beliebiger Farbe gedruckt werden. Die Schlüsselahänger können schnell und einfach gedruckt werden. kein Support Layerhöhe 0,2mm verschiedene…
- Pobrania
- 339
- Polubienia
- 33
- Ocena
- 5
P
Printablesmarcel293
Twotone hexagonal paper towel holder KTM
I remixed the hexagonal paper towel holder of Luke's 3D . I made twotone version with a KTM Logo an srew holes to mount it at a wall. @Luke: Thanks for sharing!! Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No…
- Pobrania
- 335
- Polubienia
- 63
- Ocena
- 0
P
PrintablesFSMaker
KTM Keychain portachiavi logo
KTM keychain logo with hand "OK" for the keyring Portachiavi logo KTM con mano a forma di "OK" per inserire l'anello del portachiavi
- Pobrania
- 334
- Polubienia
- 19
- Ocena
- 0
P
PrintablesSammy
KTM ready to race
A simple model of ktm ready to race. Best for desks and shelves :D
- Pobrania
- 333
- Polubienia
- 35
- Ocena
- 5
P
PrintablesMižufko
KTM Headlight Replacement
KTM Headlight Replacement I added one more bracket to this model for better stability…also the brackets are wider for better strength and the holes are wider for a better fit of the original screws no supports 80-100% infill
- Pobrania
- 333
- Polubienia
- 27
- Ocena
- 0
P
Printablessometimes_erik
KTM Folding License Plate and Turn Signal Bracket - '11-'15
*Yamaha Version in Progress* Overview Do you enjoy the freedom and fury of having a street-legal dirt bike but fear ripping (or someone seeing) your license plate? Well fear no more because now it can be tucked away in the flick of a…
- Pobrania
- 329
- Polubienia
- 50
- Ocena
- 5
P
PrintablesJanne
KTM Rear Compression Adjustment Knob
Fits ALL KTM, GASGAS, Husqvarna MX&ENDURO 2014-2022 models with 17mm high speed compression adjuster.
- Pobrania
- 327
- Polubienia
- 47
- Ocena
- 5
P
PrintablesKSV25
KTM Duke 200/390 Power Plate
The Power Plate allows you to add a little horse power to your bike with a simple bolt on part. Allows your bike to breathe better giving it better throttle response and more horsepower overall. I've seen cheap CNC parts made for this but…
- Pobrania
- 327
- Polubienia
- 20
- Ocena
- 0
P
Printablespauldaws
KTM Footpeg slider
Pair of sliders for KTM footpegs part number 78003041050 & 78003040050, these are the standard footpeg on most KTM Dirt bikes since 2000(?). Check your bike here - https://www.motosport.com/oem-parts/part-number/78003041050 Holes on base…
- Pobrania
- 308
- Polubienia
- 58
- Ocena
- 5
P
PrintablesLegufix
KTM coaster
A friend of mine is a big KTM fan. For this reason I have designed him for Christmas KTM coasters. Because I wanted to have a flat resting surface for the drink, I have decided on a two-part solution without color change. The lower part I…
- Pobrania
- 305
- Polubienia
- 56
- Ocena
- 4,25
P
PrintablesMrViddy
KTM Logo Keychain
keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 44mm x 33mm 6mm Keyring hole
- Pobrania
- 305
- Polubienia
- 40
- Ocena
- 0
P
Printablesrtadlock
Clutch lever for KTM/Husqvarna/Gas Gas
I printed the lever and adjuster in both PLA and PETG using the built in profiles in PrusaSlicer but with 50% infill. Both levers have worked well for test rides. I plan to do some trail riding to see how the lever holds up, but so far…
- Pobrania
- 303
- Polubienia
- 38
- Ocena
- 5
P
PrintablesHD_Creator
KTM keyring pendant
Printing and coloring This part is very easy to print. No supports or brim is needed. The material is not critical. I have printed mine from PETG orange (the KTM brand color) from DasFilament.de. Also the infill is not critical, I…
- Pobrania
- 294
- Polubienia
- 37
- Ocena
- 5
P
PrintablesPhrilten
SP-Connect Mount for KTM Motorcycles
Please read this description carefully and understand it, before continuing. Disclaimer: You are responsible for the safety of your bike. If you don’t know what you are doing, stick to the original parts. Hi, this is a fusion of the…
- Pobrania
- 281
- Polubienia
- 48
- Ocena
- 5
P
PrintablesDrewDeeDoo
KTM 990 950 adventure tank protector scan
A reference scan of the KTM 990 Adventure tank protector.
- Pobrania
- 280
- Polubienia
- 15
- Ocena
- 0
P
PrintablesLegufix
Desk organizer with KTM Logo
I designed a desk organizer with a KTM logo as a present for a friend. The logo is printed separately and clued to the organizer. Print instructions The presliced KTM logo is for PETG (I only had PETG available when I printed this…
- Pobrania
- 277
- Polubienia
- 55
- Ocena
- 5
P
Printablesblalor
2020 KTM 690 Enduro R throttle slop remover
The ride-by-wire throttle on the 2020 KTM 690 Enduro R has some play in it, a bit of slop when closed that I didn't like. This pair of spacers removes that. Note that there are two different spacers; you must print the pair. Print…
- Pobrania
- 259
- Polubienia
- 19
- Ocena
- 5
P
PrintablesEcapox
KTM Duke 790 (2019-2022) Tidy Tail
License plate holder for the KTM Duke 790. This design uses the stock tail light and aftermarket 10mm turn signals. Most 3rd party tidy tails use a non standard tail light and many of them are bad. I decided to design my own tidy tail…
- Pobrania
- 250
- Polubienia
- 17
- Ocena
- 0
P
PrintablesJaneo
KTM keychain
KTM brand keychain, with a simple and easy design for a quick impression and low material cost.
- Pobrania
- 248
- Polubienia
- 24
- Ocena
- 5
P
Printables4sStylZ
ABS / Traction control delete spacer for 701 husqvarna or 690 KTM 2020+
Disclaimer : Use it at your own risk. Road regulation in your country probably forbid such a modification. It is designed for 2020+ bikes or higher (despite it can probably used on other bikes) By adding this spacer on the rear speed…
- Pobrania
- 238
- Polubienia
- 12
- Ocena
- 0
P
Printablesjetse_3d
KTM inspired keychain
This keychain was a small and simple project to make, feel free to dowload or like this design.
- Pobrania
- 233
- Polubienia
- 18
- Ocena
- 5
P
PrintablesVachy
Wings KTM SUPERDUKE 1290 R 2021
I designed GP wings for the KTM SuperDuke 1290R 2021. Very easy installation: I recommend printing from PA12 or PC Blend Carbon Fiber
- Pobrania
- 231
- Polubienia
- 15
- Ocena
- 0
P
PrintablesMAKERTEAM®
KTM Pencil Box - Print in Place - no assembly
Little enhancement on the Pencil Box of YogiTech . If you like it please do not forget to give him a like too, thanks. Enjoy! Material: PLA Infill: 20% Layer height 0.2mm
- Pobrania
- 230
- Polubienia
- 31
- Ocena
- 5
P
PrintablesFelix
WP Fork Protection Ring 62,1mm for KTM / Husqvarna 48600698
A redesign of the OEM Part 48600698 adapted for 3d printing. I split the original design to allow for installation and replacement without uninstalling the forks. A groove was also added to be able to add a piece of wire to increase…
- Pobrania
- 229
- Polubienia
- 21
- Ocena
- 5
P
PrintablesJędrzej Bernakiewicz
Adapter for mounting LED indicators to KTM motorcycles
Adapter required to install an aftermarket indicator to KTM motorbikes. Works with most 690, 790, 890, 950 and 990 models. 4 options - for M8 and M10 threaded indicators - both in low and standard versions.
- Pobrania
- 217
- Polubienia
- 33
- Ocena
- 0
P
Printablessometimes_erik
Fork Seal Driver Tool - 43mm with Alignment Pins (KTM/Husky/GasGas)
This is a fork seal driving tool for use with 43mm diameter dirt bike forks. This was designed with WP dual chamber forks in mind, but will service numerous other fork types from KTM/Husky/GasGas. There are two lips designed into the seal…
- Pobrania
- 214
- Polubienia
- 24
- Ocena
- 5
P
Printablesiqjocke
KTM side stand extension foot
Side stand extension foot for ktm super adventure 1290 i printed it in PLA but it is probably stronger in ABS Use at your own risk. I am not responsible for whether your bike falls Print Settings Printer Brand: Wanhao Printer: Wanhao…
- Pobrania
- 211
- Polubienia
- 24
- Ocena
- 5
P
PrintablesDaniel
2022 KTM Duke 890 Poor Man's Power Plate
This is my design of a poor man's “power plate”… You can use whatever filter you want, drill or zip holes into it, and use it as you need. OR, you may purchase the Rottweiler Performance intake (red=race) filter, and the holes are already…
- Pobrania
- 199
- Polubienia
- 13
- Ocena
- 0
P
PrintablesBasementLAB
KTM "Type SM" Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger
KTM Type SM - Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the property of their respective…
- Pobrania
- 197
- Polubienia
- 32
- Ocena
- 0
P
PrintablesKrakert
KTM Duke 790 SP connect phone mount
A simple clamp that makes it possible to mount your phone in the center of your KTM Duke 790 using a SP connect mount. Just get one from here:…
- Pobrania
- 194
- Polubienia
- 25
- Ocena
- 0
P
Printablesbraga3dprint
KTM coaster holder
Introducing the KTM Coaster Holder: the perfect companion for your KTM coasters. This 3D-printed accessory is designed to keep 6 coasters organized and easily accessible. Crafted with precision, it snugly holds your KTM coasters in place,…
- Pobrania
- 194
- Polubienia
- 53
- Ocena
- 5
P
Printablesobservatoer
KTM/Husky Chain Tension Adjusting Helper
For KTM/Husky bikes, the chain tension is measured at the end of the upper chain guide and the distance between the swingarm and the lower side of the chain links shall be between 55mm and 58mm. This guide needs be positioned behind the…
- Pobrania
- 191
- Polubienia
- 15
- Ocena
- 0
P
Printablesmarcel293
KTM hitch ball cover
I designed a cover for my trailer hitch ball. It's prepared for multimaterial print. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 15% Filament: Prusament PETG Black
- Pobrania
- 190
- Polubienia
- 22
- Ocena
- 0
P
PrintablesKen226
KTM Kick Stand Pad / Plate
Print one of these and keep it under the seat. Next time you park on dirt, this can keep your bike from falling over. Print with at least 50% infill. For a contrasting color logo infill, swap filament at the appropriate layer.
- Pobrania
- 189
- Polubienia
- 21
- Ocena
- 5
P
PrintablesCarlos Peña
Givi Engine Guard Bumper Protector for KTM / Protector de barras tipo GIVI para KTM
Protector para barras de defensa GIVI con logo KTM
- Pobrania
- 186
- Polubienia
- 26
- Ocena
- 0
P
PrintablesBrandon Hiller
KTM Duke 390 Tail Tidy
I printed in PETG. You'll need a M5x20mm hex head screw and nut to attach the license plate holder to the base.
- Pobrania
- 186
- Polubienia
- 18
- Ocena
- 5
P
Printablesosax
Piston circlip tool for KTM motorcycles
If printed with a engineering grade plastic material, this will work once or twice in a pinch… can be extended by a ½ inch shaft in the square hole in the bottom
- Pobrania
- 171
- Polubienia
- 15
- Ocena
- 0
P
PrintablesDavid
KTM 690 SMCR screw cap/ Schraubenabdeckung
They are made with such small tolerances that they should just stay on, but incase they are a little bit loose, you could use a tiny bit of sticky tape to fix them into place. Mine hold without any tho. They are for 8mm hex bolts so they…
- Pobrania
- 167
- Polubienia
- 9
- Ocena
- 0
P
Printablesdynai
GPS Spacer for KTM Adventure 790&890 / Husqvarna Norden 901
There was a little gap between the mounting point and the Original GPS Mount (KTM Part Nr. 63512992144); this allowed the mount to rock back and forth, which slowly but steadily seemed to loosen the two bolts holding the mount. The part…
- Pobrania
- 164
- Polubienia
- 6
- Ocena
- 5
P
PrintablesMižufko
KTM 1090 Adventure R Frame Plug
Frame plug for KTM Adventure R 2 versions no supports needed with logo without logo
- Pobrania
- 156
- Polubienia
- 23
- Ocena
- 5
P
PrintablesAnton Gerhardt
Honda ,KTM, Husquarna Öl Trichter 80mm
Ich habe einen Öltrichter für verschiedene Honda, KTM und Husquarna zum verschrauben entworfen, dies hat ein Gewinde von M24x3 und passt auf viele Modelle. Gedruckt wird das ganze mit PLA oder PETG 0.2 15% Infill
- Pobrania
- 155
- Polubienia
- 17
- Ocena
- 4,5
P
PrintablesBastien Casetta
KTM 790 Duke – Dashboard Cover / Speedometer Protector
This dashboard cover is designed for the KTM 790 Duke . It protects the speedometer display against scratches, dust, and direct sunlight, while providing a clean look that integrates perfectly with the bike. ✅ Compatible with KTM 790 Duke…
- Pobrania
- 153
- Polubienia
- 9
- Ocena
- 5
P
PrintablesBidi01
KTM washer
Nice washers for your KTM Duke or RC. There are some with spacer and some without. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: Yes Resolution: 0.1 Infill: 25 Filament: 3D Jake PLA Orange Category: 3D Printing
- Pobrania
- 152
- Polubienia
- 18
- Ocena
- 5
P
PrintablesIDVert3X
KTM 390 Adventure Fork Adjuster Dial Cap
I designed this cover to prevent random people walking around my bike from changing my suspension settings. Yes, I'm that paranoid. As an added bonus, it makes the bike look nice, stealthy if you will. It's a friction fit part that…
- Pobrania
- 149
- Polubienia
- 11
- Ocena
- 5
P
PrintablesFuzzikago
KTM clutch holder
alternative for the KTM special tool to hold the clutch for assembling or diassembling part no. of KTM is 590.29.003.100 59029003100 ...you have to use a strong material like Nylon, not tested with PETG...
- Pobrania
- 148
- Polubienia
- 20
- Ocena
- 5
P
PrintablesAlessandro Governatori
Porta cellulare Rugged DooGee S99 con supporto per KTM 790 adventure R
Supporto cellulare RUGGED serie DOOGEE S99. (175mm x 18mm x 82mm) Questa versione è COMPLETA di gancio a molla per trattenere il cellulare all'interno dell'alloggiamento. Provato in off-road intenso. La molla è da cercare a parte in…
- Pobrania
- 148
- Polubienia
- 11
- Ocena
- 0
P
PrintablesVachy
KTM Superduke 1290 R 2017 frame plug with airtag holder
This is frame plug for KTM Superduke 1290 R 2017 with airtag holder. I recommend print in TPU.
- Pobrania
- 145
- Polubienia
- 11
- Ocena
- 0
P
PrintablesBrent
KTM 690 Enduro/SMC R 2012-2018 Headlight Mount
A headlight conversion for the 2012-2018 KTM 690 Enduro and SMC R. This updates the front of the bike to use a 2017+ EXC style front plate and headlight. Required hardware/parts 2x M5 Heat set inserts 2x M5x12mm bolts 2017+ EXC front…
- Pobrania
- 142
- Polubienia
- 12
- Ocena
- 0
P
PrintablesFirst Layer Design
KTM Coaster (KTM Untersetzer)
Cult silhouette of KTM logo implemented into a coaster. An extraordinary extra for every kitchen and party arrangement. Have fun! Material: PLA Layerheight: 0.2mm Infill: 15%
- Pobrania
- 139
- Polubienia
- 19
- Ocena
- 0
P
PrintablesCode_Assassin
KTM 990 Frame Plug
This is a KTM 990 frame plug. There is variance in the tubing diameter of the average KTM frame (less than 0.5 mm). This frame plug has raised ridges to ensure a snug fit. The cut outs will also allow a small amount of flex if the tubing…
- Pobrania
- 137
- Polubienia
- 8
- Ocena
- 0
P
PrintablesBerdle
KTM 1290 Super Duke GT Quad Lock Mount (updated)
In my case, when mounting this I found the original KTM display screws too short and so replaced them with some M5 x 12mm Socket Flanged Button Screws (ISO 738002) Stainless Steel (A2) from Accu, along with some 5.3mm x 10mm x 1mm Flat…
- Pobrania
- 136
- Polubienia
- 9
- Ocena
- 0
P
Printablesmarcel293
KTM "R" mirror plug
I designed a mirror plug with a R-logo for my KTM 1290 Super Duke R. You can cover the original thread. I also uploaded a version without the logo. Print Settings Printer Brand: Prusa Printer: i3 MK3S+ MMU 2 Rafts: No Supports: No…
- Pobrania
- 133
- Polubienia
- 10
- Ocena
- 5
P
PrintablesBMR
KTM 990 & 1X90 Frame Plug
This is a frame plug for KTM Motorcycles. Remixed to fill in lettering but still have a recess for paint.
- Pobrania
- 133
- Polubienia
- 6
- Ocena
- 0
P
PrintablesApostolos Kalafatis
KTM enduro/MX grips
See original version for printing suggestions.
- Pobrania
- 132
- Polubienia
- 14
- Ocena
- 0
P
PrintablesEgorka555
KTM adapter for draining the engine oil does not stain the motorcycle
The adapter for draining the engine oil does not stain the motorcycle and the environment. Thread M 12x1,5. Lay the motorcycle horizontally with the oil drain bolt at the top. Screw in the adapter and clamp the hose. Stand the motorcycle…
- Pobrania
- 132
- Polubienia
- 12
- Ocena
- 0
P
PrintablesTBX
Mounting Bracket TomTom Rider 400/500 series KTM 990 SMR/SMT/Adventure
TomTom Mounting Bracket KTM 990 SMR / SMT (maybe others too) for TomTom Rider 400/450/500/550 series …some screws 'n nuts needed… Handle bar diameter 28mm Show me your makes !!! Yes it's hard to print but unbreakable ....
- Pobrania
- 129
- Polubienia
- 6
- Ocena
- 0
P
PrintablespRoy
WP 6500 Fork Compression Adjusting Tool, KTM, GASGAS, Husqvarna
This is a basic tool used to adjust the Compression on a WP6500 cartridge fork. It is very handy since most bikes you would need to remove your handlebars in order to adjust with a flathead screwdriver. This is a flathead tip on a disc.…
- Pobrania
- 129
- Polubienia
- 4
- Ocena
- 2
P
PrintablesDarthHeino
Steering stop protector cap for KTM EXC, Gasgas, Husqvarna
In the case of a crash the lower triple clamp hits the steering stop screw causing marks, scratches and sometimes breaks the triple clamp. One of the detailed pictures shows some damages caused by the regular steering stop screw. I…
- Pobrania
- 128
- Polubienia
- 12
- Ocena
- 5
P
Printablesbafgaf899
Screwed Husqvarna / KTM Oil Funnel for Offroad Models with Logo
Screwed Husqvarna / KTM Oil Funnel for Offroad Models with air release for better oilflow Should fit on all KTM / Husqvarna / GASGAS Offroad & Supermoto models. Feel free to remix to lighten it up or add some features.
- Pobrania
- 124
- Polubienia
- 11
- Ocena
- 0
P
PrintablesEgorka555
WALL-MOUNTED CLOCK FROM A KTM MOTORCYCLE BRAKE DISC
Wall-mounted clockfor my garage from the brake disc of a motorcycle KTM TPI 300. The dimensions of the watch mechanism are 57 x 57 x 17.5 mm, you can buy here…
- Pobrania
- 124
- Polubienia
- 26
- Ocena
- 5
P
Printablesgrabejud
KTM Duke mirror screw cap
screw cap for ktm duke. (for those using a mirror on bar ends)
- Pobrania
- 121
- Polubienia
- 13
- Ocena
- 4,5
P
PrintablesBasementLAB
KTM Classic - Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger
KTM Classic - Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx 04/06/2024 added KTM_Classic 2.stl All trademarks, logos and brand names…
- Pobrania
- 121
- Polubienia
- 11
- Ocena
- 0
P
PrintablesLegufix
Cell phone mount KTM 390 Duke & S9+ with bumper
A cell phone mount for using your phone as a navigation device.
- Pobrania
- 117
- Polubienia
- 21
- Ocena
- 0