Wyniki wyszukiwania: lament

Sortowanie

21 548 modeli

P
PrintablesJernejP.

Bed scraper - fast print 15min - minimal filament usage 3g

Print in PLA so you dont damage the printbed. Check out the new larger model at: https://www.printables.com/model/291609-bed-scraper-mk2-8g-25min Still uses only 8g and prints in 25min. Print instructions Click print =)

Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu

Pobrania
39 451
Polubienia
3967
Ocena
4,78
P
PrintablesSeemomster

Filament samples - 42 materials

A remix of the model Filament sample with box from Zahg . If you need the case for the samples, in the original model includes a great one. Direct downloadlinks for case : box_ top _ pla _v2.stl , box_ top _ petg _v2.stl , box_ top…

Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
26 193
Polubienia
11 129
Ocena
4,96
P
PrintablesPomi

Filament Cutter 45°

Print No supports needed. Tested with PETG and PLA. Material One segment from snap-off blade 18 mm ( example 1, example 2) 2 pieces of screw M3 x 25 mm 2 pieces of ball pen spring (probably 20 mm length, 4 mm diameter, M3 screw must fit…

Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu

Pobrania
22 191
Polubienia
12 904
Ocena
4,87
P
PrintablesK2_Kevin

Filament Clip - K2 Clip

K2 Clip The K2 Clip is a unique design with multiple locking points. No matter what, there will be a locking point facing up. The clip can be left to "float" on your filament spool while printing. Extra secure storage using the locking…

Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu

Pobrania
18 231
Polubienia
3121
Ocena
4,82
P
PrintablesExtrutim

Helix Test Cube / Filament Sample / XYZ Calibration

I wanted to have a test print which I can use to test the dimensional accuracy of my printer and the print quality of my filaments. But it should also be pretty enough to keep as a color sample afterwards. So I created this 30x30x30 mm…

Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu

Pobrania
11 972
Polubienia
1048
Ocena
4,93
P
PrintablesZahg

Filament sample with box

Also check out the rugged box. Filament samples with a box with space for 30 pcs. One sample in PLA with standard settings for Prusa takes about 20 minutes to print. The box took me a little more than 5 hours. Three fields that are 0.2,…

Wydruk około 2,97 €–3,63 € nettoWstępna wycena jednego wariantu

Pobrania
11 495
Polubienia
2385
Ocena
4,93
P
PrintablesGlennovitS 3D

Gridfinity Baseplate (Quick print, lite version, less filament)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu

Pobrania
10 098
Polubienia
1129
Ocena
4,96
P
PrintablesHugoG

Filler - Filament Holder

This design solves all the basic necessities: Fits almost every object with a flat top surface and printer frame when customized. Can easily hold the weight of 1+ kg spools. Fits between other spools if necessary. In addition to the…

Wydruk około 2,52 €–3,08 € nettoWstępna wycena jednego wariantu

Pobrania
8694
Polubienia
1711
Ocena
4,89
P
PrintablesOverMaintained

Filament Shelf Brackets

3D printable Filament Shelf Brackets make storing your filament a breeze! No supports needed. I recommend mounting a bracket to each wall stud. ¾" ID PVC Pipe (1" OD) will snap into place between brackets for easy assembly. EDIT 5/6/24:…

Wydruk około 10,40 €–12,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
7479
Polubienia
3370
Ocena
4,9
P
Printablesvivamus3d

Hygrometer for Filament Dryers (Sunlu S1 and eSun eBox)

The Sunlu S1 and eSun eBox unfortunately don't come with a built-in humidity gauge. But there are cheap mini digital hygrometer/thermometers available in many shops which allows you to easily add one yourself. My design consists of a base…

Wydruk około 0,99 €–1,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
6407
Polubienia
360
Ocena
4,89
P
PrintablesAikoly

Filament Sample Spool (honeycomb)

This is a spool for 50-100g 1.75mm filament samples such as the ones included in MakerBox subscriptions (version A also fits the original zipper bags) ;) I have also included a spool for 150-200g 1.75mm filaments such as cleaning and high…

Wydruk około 0,62 €–0,75 € nettoWstępna wycena jednego wariantu

Pobrania
5822
Polubienia
835
Ocena
4,91
P
Printablesishikawats

Filament Quick Clamp V2

This is new version of my previous Filament Quick Clamp models. Features: Prevents filament spool from unraveling. Filament is easy to snap in place by a clever gripper mechanism. Clamp and gripper is spring loaded by a single internal…

Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu

Pobrania
4877
Polubienia
1928
Ocena
4,81
P
Printableskennyd1gital

Filament Spool Desiccant Canister

A desiccant canister designed to be mounted in the center of a spool of filament during storage to help keep the filament dry. The canister has a lock-ring which threads onto the opposite end from the cap, after the canister has been…

Wydruk około 2,30 €–2,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
3294
Polubienia
432
Ocena
4,93
P
PrintablesMaciey

Filament filter cleaner

A small filament filter that can be permanently attached to the spool. One spool one filter.

Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu

Pobrania
3278
Polubienia
326
Ocena
4,92
P
PrintablesMolodos

Filament Samples | Filament Color Swatches

Box for multiple Samples: Check out here Smart Version with NFC: Check out here This filament samples are designed to show many features as well as having a space for information about the filament Features Thin walls test (3, 2, 1.5,…

Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu

Pobrania
3262
Polubienia
993
Ocena
5
P

ROSA3D FILAMENTS MASTERSPOOL - REUSABLE REFILL DISCS COMPATIBLE WITH AMS

COMPATIBLE WITH AMS! Are you a beginner 3D printing enthusiast or a seasoned professional? Are you looking for a way to reduce the amount of leftover spools after using filament? Or are you wondering how to minimize waste after 3D…

Wydruk około 22,26 €–27,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
3120
Polubienia
182
Ocena
4,95
P
PrintablesFrasse16

Filament Spool holder

The PERFECT filament spool holder This spoolholder is very efficient and easy to use and print. One side uses only two different 3D-files printed twice, two 608 bearings and two M3 bolts and nuts. The spoolholder is very sturdy, it keeps…

Wydruk około 5,19 €–6,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
2437
Polubienia
495
Ocena
4,92
P
PrintablesTom

InFiDEL - Inline Filament Diameter Estimator (lowcost)

The InFiDEL is a cheap (< $5) filament diameter sensor that can be calibrated to provide surprisingly precise filament diameter readings in real-time. While firmware support is currently sparse, the idea is to use the sensor to correct…

Wydruk około 2,30 €–2,81 € nettoWstępna wycena jednego wariantu

Pobrania
2426
Polubienia
676
Ocena
5
P
Printables3D-Print Brehm

IKEA 365+ Box 10,6 Liter - Filament Dry Box mit 2x Silica Zylinder (für PRUSAMENT 2 Rollen) mit digital Hygrometer

Hallo zusammen, hier mal wieder einige Optimierungen für meine 3D-Druckwerkstatt, die ich euch gerne zum Nachdruck übergeben möchte. Um die Druckqualität zu erhöhen, habe ich mir dann doch mal einen Drybox gebaut und verschiedene Entwürfe…

Wydruk około 2,59 €–3,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
2360
Polubienia
399
Ocena
4,33

Sunlu FilaDryer S1 filament dryer box PTFE fitting mounts (M10/M6)

Quick mount that fits various PTFE fittings I found in junk drawers. Use short PTFE cutoffs, or full reverse-bowden with a longer tube. Prevents filament from scraping against the box during printing. Go full reverse-bowden (PTFE tube all…

Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
2272
Polubienia
332
Ocena
4,94
P
PrintablesPeopleware

Präziser Filament Aufwickler (opt. Akkuschrauber und Motormodul) - Filament winder with opt. cordless screwdriver

Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…

Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
2224
Polubienia
321
Ocena
4,8
P
Printablesakamaka

1.75mm Filament-Splicer-Guide Print-in-Place

Print-in-Place 1.75mm Filament Splicer Guide - no respoling required! Filament Prusament ASA with 0.2mm layer with variable layer (smallest possible layer) for the filament guiding features hinges and latch. Proof of concept - Not yet…

Wydruk około 2,47 €–3,02 € nettoWstępna wycena jednego wariantu

Pobrania
2193
Polubienia
222
Ocena
4,27
P

Filament Clip (Anti-tangle)

This is my dream filament clip, designed to prevent the end of the filament getting tangled in the spool, being easy to remove and add, and it doesn't pop off when you put the spool away because the design sits inside the spool itself. To…

Wydruk około 0,47 €–0,58 € nettoWstępna wycena jednego wariantu

Pobrania
1985
Polubienia
298
Ocena
4,58
P
PrintablesCelta

IKEA Kallax Filament Storage Rack

Organize your 3D printing filaments with this simple and effective filament storage solution for IKEA Kallax shelves. This easy-to-print design consists of two parts: one for the front side and another for the back of the shelf. Print the…

Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu

Pobrania
1691
Polubienia
626
Ocena
4,93
P
PrintablesThomas Mergan

Ultimate Filament Sample (with storage box)

I made this filament tag which tells you a lot about your filament. Features: The idea for the thin walls test actually came from Mildly_Admirable and his Filament Swatch . There is a key ring hole included but it can also be glued to…

Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu

Pobrania
1647
Polubienia
486
Ocena
4,84
P
PrintablesLyle Scott

Filament Spool Transfer Device

A brief video deomonstration: https://youtube.com/shorts/kiZKUkexKrg?si=kBOF8F9uXhrnBcDT Inspired by the struggles of some printers to use cardboard spools, this device will ensure level winding of filament onto a new plastic spool. Run…

Wydruk około 4,58 €–5,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1635
Polubienia
294
Ocena
5
P
Printables3DJourney

Ender 3 S1 Filament Swivel guide (supports Capricorn/PTFE tube 4mm OD)

Don't forget to hit the like button if this helps you :) A filament guide for the Ender 3 S1 gantry top rail, remixed to enlarge the hole through the eye of the swivel to be larger so its supports some PTFE tubing. OD 4mm is a nice snug…

Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu

Pobrania
1546
Polubienia
285
Ocena
4,81
P
Printablesishikawats

Filament Quick Clamp

This is a rubber band powered filament clamp-on to prevent the spool from unraveling when stored. Mechanism is fully print-in-place. Add rubber band for the spring loading. I reused some that came with a bunch of asparagus. There is a…

Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu

Pobrania
1463
Polubienia
660
Ocena
4,76
P
PrintablesGuillaume3D3

PET Bottles to PET Filament - Give Me Bottles ! / GMB Project

Extrusion machine which allows plastic bottles (PET) to be recycled into printable filament for a 3D printer. I have made a guide in .pdf format, which summarizes all aspects of the machine with information.…

Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1449
Polubienia
1109
Ocena
5
P
PrintablesmisterT

MasterSpool - DAS FILAMENT Edition V3 - Optimized Print

Important Update 2025/2026 Das Filament changed from 800 g to 1 kg. The old Masterspool is no longer compatibel with the 1kg spools. The NEW Das Filament1 kg Masterspool:…

Wydruk około 3,76 €–4,60 € nettoWstępna wycena jednego wariantu

Pobrania
1444
Polubienia
135
Ocena
4,88
P
PrintablesJeroenVermeulen

Prusament Filament Indicator PLA PETG meters grams

A filament indicator for Prusament classic spools (non NFC) . Update 2026-01-27: Added v2 with small corrections on weights, added TPU To be placed over the 4 consecutive fully open hexagons (see picture). It snaps in the hexagons around…

Wydruk około 0,29 €–0,36 € nettoWstępna wycena jednego wariantu

Pobrania
1403
Polubienia
655
Ocena
4,94
P
PrintablesNaNO3

Anycubic Vyper Filament Spool Holder with Bearings

This is an improved filament spool holder for the Anycubic Vyper or Creality CR-6 SE. It fits and locks with the original spool arm provided by Anycubic or Creality. Parts required 2x 608ZZ bearing 1x Spool Holder v21 (0.2mm layer height)…

Wydruk około 0,28 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1340
Polubienia
197
Ocena
4,76
P
PrintablesAUGU5TO

Calibration Cube - wall thickness - new filament - extrusion

Description This is a fast and easy to print model to calibrate your new filament. It can be used to find the right settings for the extrusion factor to get the right wall thickness. It is designed with a 0.86 mm wall thickness to meet…

Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu

Pobrania
1267
Polubienia
89
Ocena
4,95
P
PrintablesDukeCGN

Quick PTFE Filament Tube change system for dryboxes

In order to change the filament quicker and more comfortable I made some small and easy to install parts in Fusion 360. With this you can change from one colour to to another by simply changing the PTFE tube adapter and close the box with…

Wydruk około 1,03 €–1,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1213
Polubienia
201
Ocena
4,96
P
Printableschwiede

Filament drybox inlay

The Ultimative Filament Drybox Introduction So... I saw those filament dryboxes. Of course I'd wanted to design one by myself so badly… And here it is! Let me introduce an overengineered but cool looking drybox spool stand! Does it print…

Wydruk około 2,58 €–3,15 € nettoWstępna wycena jednego wariantu

Pobrania
1111
Polubienia
889
Ocena
5
P
Printablesmp42

Drybox filament guide using PTFE tube

Just print with normal settings (0.20), PLA or PETG would be fine. The only other material needed is a piece of standard PTFE tube. Added sliced files for PLA and PETG

Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1071
Polubienia
175
Ocena
4,96
P
Printables_Alexis_

Triangle Filament Clip

Triangle Filament Clip (Based from K2 Clip) The clip can be left to "float" on your filament spool while printing. Three identical anchor points to facilitate the installation of the clip. The solid form is easier to print if you have…

Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu

Pobrania
1005
Polubienia
130
Ocena
4,96
P
PrintablesNils Kal

Prusa i3 LED Lightbar with Filament Guide MK2 / MK3 / MK3S - Single Piece

Here is my design of a Lightbar for the Prusa MK2* & MK3(s). Features: LED's directly powered by the printer Wiring running inside the mount Integrated filament guides for both spool sides On/Off switch Directly wired to the Einsy board…

Wydruk około 5,31 €–6,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
943
Polubienia
226
Ocena
4,75
P
Printables3DPrintscher

SUNLU Refill Spool (V2) Adapter for Recyclingfabrik Refill Filament

Hallo zusammen, da ich viele leere, blaue SUNLU Refill-Spulen (V2) habe und keine Lust hatte, für die verschiedenen Farben der Refills von der Recyclingfabrik extra Spulen zu drucken, habe ich mit Fusion 360 einen Adapter entwickelt, um…

Wydruk około 2,47 €–3,01 € nettoWstępna wycena jednego wariantu

Pobrania
917
Polubienia
152
Ocena
5
P
PrintablesDarkburrow

Ender 3 S1 filament swivelguide

It also fits any printer with a 20x20mm aluminium extrusion

Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu

Pobrania
904
Polubienia
160
Ocena
4,7
P
PrintablesDombi3D

MMU2S filament buffer upgrade for Samla 22l Drybox.

With this upgrade you can keep your filaments dry and organized in a very small footprint. You do not need anymore the filament buffer. These designs should be compatible with all 200 mm Spools which has a round (Das Filament type) or…

Wydruk około 1,79 €–2,19 € nettoWstępna wycena jednego wariantu

Pobrania
896
Polubienia
351
Ocena
0
P
PrintablesOestle

IKEA 365+ 10.6l Filament Storage & Dry Box

Modular filament storage & dry box using the IKEA 10.6l containers that can fit 2 spools of 1kg filament. All the parts for one box fit on the buildplate of the MK4 and can be printed at once. Currently for storage only, but that's all i…

Wydruk około 6,97 €–8,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
895
Polubienia
201
Ocena
4,89
P
PrintablesDarkmoon

Sunlu S2 Filament Dryer PTFE Tube

Sunlu S2 Filamenttrockner PTFE-Schlauch PTFE Tube für Filament, was sich in alle Richtungen bewegen kann, kann erstellt. der Adapter nimmt einen PTFE Schlauch 4x2 mm auf. Dieser wird ca. 5cm ins innere geschoben und ca. 10 cm bleiben…

Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
875
Polubienia
138
Ocena
4,96
P
PrintablesPetour

Filament dryer extension for food dehydrator

Simple ring extension for a food dehydrator which makes it usable as a filament dryer. Suitable for a 32 cm diameter dehydrator. A 90 mm wide spool fits inside the dryer with one ring extension. The rings can be stacked up to get a higher…

Wydruk około 6,43 €–7,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
856
Polubienia
116
Ocena
4,92
P
Printablespaw3D

Desiccant Bin for Filament Storage 2026 (Remix)

General The original Filament Storage 2026 desiccant bin is designed to be assembled once and not come apart again. This works as long as (a) the option is available to dry the desiccant inside the bin, and (b) the part is printed from a…

Wydruk około 1,65 €–2,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
826
Polubienia
115
Ocena
4,95
P
PrintablesPeter Farell

Hellraiser Lament Configuration

Reproduction of the Hellraiser Lament Configuration based on LeMarchand Boxes. Phillip LeMarchand was a French architect, artisan and designer who is posthumously credited as possibly one of the most prolific, if undiscovered, mass…

Wydruk około 60,44 €–73,87 € nettoWstępna wycena jednego wariantu

Pobrania
793
Polubienia
135
Ocena
5
P
PrintablesDarkburrow

Stock filamentholder for Ender 3 S1

I tried finding the stock one that would fit the opposite side of the spoolmount but in avail, so i decided to just model it quickly and share it

Wydruk około 2,27 €–2,77 € nettoWstępna wycena jednego wariantu

Pobrania
784
Polubienia
117
Ocena
4,79
P
PrintablesFra085

Prusa MINI Internal Filament Sensor (IFS)

READ THIS TO BETTER UNDERSTAND THIS MOD BEFORE PRINTING This mod needs you to flip the IR sensor connector so be ready to swap cables as described below. You can damage the sensor if you will not follow these instructions. Updates at the…

Wydruk około 4,97 €–6,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
747
Polubienia
248
Ocena
4,86
P
PrintablesvmLOGIC

Filament samples (f3d file)

I love Seemonster's filament pattern. They are reduced to the essentials and are not at the same time printer tests, which some others make of it. Thanks for that! :-) But I wanted to design the printed texts myself. No stickers, no…

Wydruk około 0,31 €–0,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
735
Polubienia
121
Ocena
4,96
P
PrintablesFelixls

Filament clip

I've tried multiple filament clips online, none worked for me, so I designed this one for 1.75mm filament. Print instructions PETG, 15% (more better), no supports, 0.15mm layer height.

Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu

Pobrania
689
Polubienia
47
Ocena
4,83
P
PrintablesSaphir

Filament Clip | Saphir's Favorite Filament Clip

Can we make the best just a little better? Yes - we make it a bit simpler, easier to use and add some grip! My favorite filament clip until today was the “Grandma's favorite filament clip” by Extrutim . There was a thing I did not like:…

Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
649
Polubienia
118
Ocena
5
P
Printablesaxe

IKEA Lack Filament Pass-through with PC4-M10 fitting

Filament Pass-through for IKEA Lack Enclosure, using a PC4-M10 fitting. BOM ・1x PC4-M10 fitting Print instructions Rafts: No Supports: No Resolution: 0.2 Infill: 15% Thanks to Iwao.

Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
639
Polubienia
126
Ocena
5
P
PrintablesCMF

Filament Drybox for Auto-Rewind Spool Holder

A filament box based on the familiar hexagon style but redesigned for the integrated auto-rewind spool holder v5.6. by Vincent Groenhuis. This box fits the 75mm version. I designed this for my MMU2S to remove the buffer and keep all…

Wydruk około 0,46 €–0,57 € nettoWstępna wycena jednego wariantu

Pobrania
634
Polubienia
115
Ocena
5
P
Printablesclovisd

Filament Sample Box w/ Infill, Fill Patterns, and Finish Types [REMIX]

This is a slight modification (added text, print settings, etc) and print preparation for printing your own 3D Printing Settings sample box featuring various Infill types, Finish types, and Surface pattern types. The following Patterns…

Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu

Pobrania
623
Polubienia
150
Ocena
5
P
Printablesslothstops

Filament Roller for 1kg and 2,5kg spool

You need no tools, no screws, no shafts, no threaded rods. The roller can be screwed to the surface on which it stands. The filament rolls easily due to the large rolls. Only 3 parts to print. You need the ball bearings. Two different…

Wydruk około 2,98 €–3,64 € nettoWstępna wycena jednego wariantu

Pobrania
617
Polubienia
55
Ocena
5
P
PrintablesA2S_dESIGN

3DBenchy filament clip

A clip to hold the filament on your spools and prevent it from getting tangled. When we put this clip from the famous 3DBenchy on the spools we can appreciate the color and finish of the filament after printing.

Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
612
Polubienia
329
Ocena
2,83
P
PrintablesjonnieZG

Hangable Filament Waste Bin (old version)

This is the old version - see my latest, upgraded Version 2 . Hangable filament waste bin inspired by some IKEA wall organizer boxes that I saw once, but couldn't find one later. The bin can be easily removed when you need to empty it,…

Wydruk około 1,33 €–1,63 € nettoWstępna wycena jednego wariantu

Pobrania
589
Polubienia
174
Ocena
4,44
P
Printables3D KIMBA

Spool Wind Spinner: Another Way to Recycle a Filament Spool

Spool Wind Spinner: Another Way to Recycle a Filament Spool Product Description: Transform your empty filament spools into a vibrant Spool Wind Spinner with this innovative design! By printing the blades and end caps that hold bearings,…

Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu

Pobrania
589
Polubienia
294
Ocena
5
P
Printableszuberio

Print-In-Place Filament Filter

A print-in-place filament filter that hinges open/closed and has a slide locking mechanism. No supports 0.2mm layer height 0.4mm nozzle 15% infill PLA Designed for two 7mm thick foam pads that are cut to 15mm wide by 25mm long.

Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu

Pobrania
587
Polubienia
93
Ocena
4,78
P
PrintablesChewey

"Super Crift" filament clip

I've tried various filament clips and didn't feel fully content with any of them, so I decided to create my own. I noticed that the spools with the tiny hole on the rim can be used to insert the filament end and it works so well. Only…

Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
579
Polubienia
84
Ocena
4,75
P
PrintablesElektroarzt

Vacuum helper disc for filament dry bags

Simple but effective disc for usage with filament dry bags. I always had difficulties in using the pump right in the first attempt. Just put one disc with the filament in the bag and exhaust the dry bag manually or with a battery pump…

Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
546
Polubienia
82
Ocena
4,85
P
Printableskaje

Filament Clip - Mini Curved Version 3 - IMPROVED AGAIN!

NOTE : Check for newer and better(?) versions of this clip by searching for “filament clip mini curved” : https://www.prusaprinters.org/search/all?q=filament%20clip%20mini%20curved This is my third attempt at getting the “perfect”…

Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu

Pobrania
546
Polubienia
69
Ocena
4,87
P
PrintablesShoaib Khan

Wydruk około 4,11 €–5,02 € nettoWstępna wycena jednego wariantu

Pobrania
456
Polubienia
121
Ocena
5
P
PrintablesFranz

Ender 3 S1 - central Filament Sensor Bracket

Since I've mounted 2 spools on my printer for fast end easy change I created a model to attach the filament sensor - still flexible - in the center. If you also want a secondary spool, check out my other model:…

Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
426
Polubienia
68
Ocena
4,93
P
PrintablesSneaks

Two Piece Thread Together 100g Filament Spool

For over a year now, I've been signed up for Proto-Pasta's Endless Pastabilities which sends three 100g spools of Filaments every couple of months. I absolutely LOVE Proto-Pasta and look forward to getting these unique filament colors…

Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu

Pobrania
422
Polubienia
89
Ocena
5
P
Printablesschmidtflo

Anycubic Vyper Filament Sensor Holder (PTFE-Input)

You want to feed your Vyper with filament through a bowden tube? With this new filament holder design, you can stick a bowden tube into the filament sensor input and feed your filament from a distance. Replaces the old tiny metal bracket.…

Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
404
Polubienia
44
Ocena
4,67
P
PrintablesFransiscus

Magnet filament coupler for drybox

Magnetic filament coupler with ring magnets to get a easy access to the filament or detach the spool-part from the printer. The goal was: keep it simple and easy. 4 mm ptfe tube fits snuck into de hole of the magnet. The petg cap gives…

Wydruk około 0,31 €–0,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
400
Polubienia
160
Ocena
5
P
Printablesxwischi86

12-Hour Filament (PETG/ASA/ABS) Drying GCode for Bambu Lab P1S

## 🚨 CRITICAL MATERIAL WARNING 🚨 This drying profile is ONLY suitable for: - PETG - ASA - ABS ### ⛔ DO NOT USE WITH PLA ⛔ The bed temperature of 80°C will DAMAGE PLA filament! - PLA begins to fuse at temperatures above 60°C - Using this…

Wydruk około 6,78 €–8,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
397
Polubienia
25
Ocena
5
P
PrintablesTwirlygrlandMom

Flip Flop Sandal Summer Earring Set - Gcode included for easy filament change two-tone design, dangle earrings for summer

Fun dangling flip flop earrings with a multi-color print utilizing filament changes. Excited to see what color combinations you choose! Size up or down but watch the size of the post hole. We included the gcode for a set. But feel free to…

Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu

Pobrania
386
Polubienia
90
Ocena
5
P
PrintablesArea51

Filament Spool Holder, Prusa Mini Upgrade

With my Prusa Mini followed a simple filament spool holder that needed adjustment when using a spool with different width. My solution is a new simple and compact small spool holder, easy to bring with you and not needing adjustments for…

Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
382
Polubienia
80
Ocena
4,93
P
PrintablesLeokaldzik

Filament connector, Filament splicing | enlarge your big black filament roll

Do you have a problem with loose filament ends? Change it now!!!! This tool will help you connect the fibers. Just insert two tips, heat with a soldering iron or lighter and connect. (Can be cleaned with a knife)

Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu

Pobrania
370
Polubienia
45
Ocena
5
P
PrintablesHeikit

Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu

Pobrania
366
Polubienia
49
Ocena
4,75
P
PrintablesDaGov

Bondtech feeder with internal filament sensor - IFS (BMG parts compatible)

This is implementation of Bondtech feeder with Prusa internal filament sensor (IFS). You need extend some holes with roamer 3 mm and thread M3, M2 (for filament sensor) and M6 for fittings. Older version without filament sensor

Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu

Pobrania
350
Polubienia
50
Ocena
5
P
PrintablesGiantBrain

Gravity Spoolholder Single Filament Adapter

You like my Work? Support my efforts and push the like ❤️ Make my day and post yout Makes 🤗 This adapter is usefull if you want to use the Gravity Spoolholder for single filament Prints without the noisy clonk sound 😏 Print instructions…

Wydruk około 1,67 €–2,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
334
Polubienia
61
Ocena
5
P
PrintablesPHILTUTTLE

MMU3 Filament Feed Tool

I designed a tool to help feed filament through the MMU3. I was getting annoyed with having to loosen the screws to rotate the Idler Body to aid in pushing the filament into the Front PTFE Tubes. Super quick print, I went with 0.2 layers,…

Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu

Pobrania
331
Polubienia
110
Ocena
5
P
Printableslanguer

Filament Spatula

Simple spatula remix from Tor G - scaled to print on Mini

Wydruk około 1,34 €–1,64 € nettoWstępna wycena jednego wariantu

Pobrania
329
Polubienia
24
Ocena
5
P
PrintablesPrintmajstr

Dart Vader OILpaint "Filament Painting"

🖼 Dart Vader Oilpaint Art by AI .. "Filament Painting" 👀Preview: 🔧 Printing Settings: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm 🎨 Materials: PLA JakobFIlament Black Transmission Distance: 0.3 PLA…

Wydruk około 3,80 €–4,65 € nettoWstępna wycena jednego wariantu

Pobrania
320
Polubienia
159
Ocena
5
P
PrintablesBTuck

Filament spool desiccant cylinder

I wanted a desiccant holder that would fit inside a filament spool. I found a lot of models that used holes or vertical slots to allow air to pass through. I don't like printing posts as it takes longer to start and stop for each one. I…

Wydruk około 2,89 €–3,54 € nettoWstępna wycena jednego wariantu

Pobrania
313
Polubienia
44
Ocena
5
P
PrintablesGhosty1967

Filamentspule (refill)

Filamentspule aus zwei Passteilen für die Aufnahme von z.B. eSun Refill-Filamentspulen. Benötigt werden außerdem: 2 x Innensechskantschraube M5 x 60 2 x Mutter M5 Den Druck habe ich mit den Voreinstellungen 0,2 (SPEED) des Prusaslicers…

Wydruk około 4,35 €–5,32 € nettoWstępna wycena jednego wariantu

Pobrania
306
Polubienia
7
Ocena
5
P
Printablesfuchsr

Ball-style Filament Guide for Prusa i3 Mk3S

This is a filament guide for the Mk3S that implements @Nerys's rotating ball mechanism. I've been using this kind of filament guide on my other printer makes for a long time and finally decided to adapt it for the Prusa i3 Mk3S. Do you…

Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
293
Polubienia
53
Ocena
5
P
PrintablesDr White

Classical Passive Filament Tracker

🎯 Keep an eye on your filament — the smart, simple way! The Passive Filament Tracker is a purely mechanical tool that visually shows the estimated filament used and the remaining amount on your spool. No wires, no batteries — just mount…

Wydruk około 2,19 €–2,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
292
Polubienia
144
Ocena
4
P
PrintablesAA

Spoolholder X2 (up to 4kg spools) - Filamenthalter X2 (bis 4kg Rollen)

Filamet spoolholder X2 The filament spool holder X2 for Prusa MK3 can hold any 1kg standard spool (also the 2kg Prusament PLA Recycled) as well as with the 2 different extensions spools up to 4kg or a maximum spool diameter of 350mm. The…

Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
288
Polubienia
48
Ocena
5
P
Printablesvolly

Rubber Band Filament Cutter 45°

I love the Filament Cutter 45 from Pomi, but as i try to print it, i found that the needed materials are not as common available as i thought. So i decided to give it a “facelift” with a even easier accessible material: rubber band. Print…

Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
278
Polubienia
63
Ocena
5
P
Printablesishikawats

Grippy Filament Clip Clamp

This is a variation on previous model Filament Quick Clamp : https://www.printables.com/model/506814-filament-quick-clamp A rubber band powered filament clamp-on to prevent the spool from unraveling This new model is different in the…

Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu

Pobrania
268
Polubienia
53
Ocena
5
P
Printableskez

Rear Filament sensor for Prusa XL

I had limited side room but sufficient vertical room for my 5 head Prusa XL, so I wanted to mount the spools above the printer, however the placement of the side filament sensors made this an awkward arrangement. I made the bracket that…

Wydruk około 0,58 €–0,70 € nettoWstępna wycena jednego wariantu

Pobrania
266
Polubienia
98
Ocena
5
P
PrintablesEirin

Guia Filamento Ender 3

guia de filamento para Ender 3

Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu

Pobrania
260
Polubienia
10
Ocena
0
P
PrintablesKing_Morris

MK3s+ PC4-M6 FilamentSensorCover

A simple remix from original MK3s+ "fs-cover" and "MK3s PC4-M6 FilamentSensorCover" by RoboMagus to connect a reverse bowden setup using a PC4-M6 coupler on MK3s+.

Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
252
Polubienia
33
Ocena
5
P
PrintablesHawwwran

PTFEntrance - Filament to PTFE entrance guide

Funnel to help you guide filament into PTFE tube. Holds the PTFE tube firmly in place. How to use Utilizes Festo M5-4 fitting ( MMU3 spare part ) to firmly hold the tube in place To be fixed with thick doublesided tape Designed to be used…

Wydruk około 0,47 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
250
Polubienia
167
Ocena
4,75
P
PrintablesCelta

Filament Measuring Scale (Multi-Material)

This filament measuring scale remix is designed in Fusion 360 and is perfect for multi-material printing. The design includes added bodies for letters and indicators instead of holes. It is easy to print and use.

Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu

Pobrania
247
Polubienia
139
Ocena
5
P
PrintablesTrachtorBeam

Universal Spool Roller | 1 KG Filament Spool | Plastic House 3.7L Container

Print in PETG using standard PETG printing parameters or some other tough plastic like ASA. I used Inland PETG and printed with Prusa's generic PETG parameters. Part is thin, so infill 15% will be fine. PLA will work fine too, but…

Wydruk około 5,04 €–6,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
245
Polubienia
44
Ocena
0
P
PrintablesBTuck

Filament spool desiccant cylinder V3

I wanted a desiccant holder that would fit inside a filament spool. I found a lot of models that used holes or vertical slots to allow air to pass through. I don't like printing posts as it takes longer to start and stop at for each one.…

Wydruk około 2,45 €–2,99 € nettoWstępna wycena jednego wariantu

Pobrania
243
Polubienia
24
Ocena
4,86
P
PrintablesPeter Farell

The lost Lament Configuration

The lost Lament Configuration Dice/Box

Wydruk około 4,12 €–5,04 € nettoWstępna wycena jednego wariantu

Pobrania
242
Polubienia
89
Ocena
0
P
PrintablesMLS

Small Spool Adapter for Sunlu S1 Filadryer / Adapter für kleine 250g Spulen im Sunlu S1 Filament-Trockner

Der Sunlu S1 ist nur für die 1kg Standard-Spulen vorgesehen. Um auch die kleinen 250g Spulen verwenden zu können, entwarf ich diesen Adapter. Nachdem die Spule auf den Adapter gebracht wurde, wird dieser nur zusammengesteckt und in die…

Wydruk około 8,77 €–10,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
235
Polubienia
45
Ocena
5
P
PrintablesJeroenVermeulen

Prusament NFC Filament Indicator PLA PETG TPU meters grams

A filament indicator for Prusament NFC spools . Update 2026-01-27: Removed 'feet' versions, added TPU. Update 2026-01-14: Uploaded V2. On V1 the second and third number of grams were swapped. It fits on 2 places on each sides of the…

Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu

Pobrania
230
Polubienia
69
Ocena
5
P
PrintablesBlissa Studios

Recreator Mk5 powered Filament spool switcher & Winder

update : I have included a pdf in the files to show assembly with renders to help make building this a bit more smooth. Some parts may have changed since I started putting this together. All uploaded parts are the most recent. Recreator…

Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
224
Polubienia
42
Ocena
0

Better Hanging Filament Spool Holder

Print it, snap it together, hang it up. It requires no additional parts. You can quickly depress the tabs on one arm to remove it and swap out the spool. This spool holder is intended to be hung from a standard (in the US) closet clothes…

Wydruk około 3,14 €–3,83 € nettoWstępna wycena jednego wariantu

Pobrania
218
Polubienia
29
Ocena
4
P
PrintablesDaHouzKat

Original Prusa Enclosure Left Filament Guide and Adjustable Thermometer Bracket Combo

Features Combines the Adjustable Thermometer Bracket and the Filament Guide Enables to use a second spool holder on the left side Uses the same hardware as for the filament guide What you need Printed parts thermometer_bracket_A (1x)…

Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu

Pobrania
208
Polubienia
72
Ocena
5
P
Printablespressi

Prusa MINI / MINI+ Integrated Filament Sensor

Model update: 30.1.2025 Description update: 10.11.2025 Assembly Notes — Steps That Differ from the Original Procedure Cut the PTFE tube to 27 mm , keeping the original chamfered outer edge . On the freshly cut side, create a small inner…

Wydruk około 4,73 €–5,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
205
Polubienia
132
Ocena
5
P
PrintablesAlessio

BOX Filament Spool

A box shaped like a filament spool, with a quick closure. I designed it because I was sick of seeing the usual square boxes. Box diameter is 10cm but you can scale it as you want. Print settings layer height: 0.25mm printing speed:…

Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu

Pobrania
205
Polubienia
67
Ocena
5
P
PrintablesTperroneDesign

Air Tight Filament Dry Box and Spool Holder - Remix

Great original model by Ondřej Stříteský , and great remix by EsotericMaker . After printing EsotericMaskers version I decided to make some changes for my personal setup. I moved the collet location to the bottom half, made the side walls…

Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
197
Polubienia
43
Ocena
4