3133 modeli
The original file that I remixed is this , I have added new features to test. I added new things to test like stringing test and the write on the bottom. You can also test a lot of other things: bridging bed level stringing calibration…
Wydruk około 3,17 €–3,87 € nettoWstępna wycena jednego wariantu
Note: printables.com is being very opinionated about these gcode files and won't allow most of them to be posted. Please find all the gcode files on thingiverse here: https://www.thingiverse.com/thing:4714033 . Refined Bed Leveling &…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
It seems like a lot of folks on reddit have questions about getting their first layer height properly calibrated. A big part of the problem I think is that the prusa first layer file only has one little square at one location. So I made…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After using the zip ties for a while to level the Pinda Probe I started to get worried about running out of them so I designed this. This replaces the zip tie that is used to level the probe. It is a very quick print and is well worth…
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This print consists of the base and 3 thumb screws for leveling adjustment. The base can be printed as a single color, or with 2 colors for MMU2S users. Import the base STL into PrusaSlicer and choose ‘Split to Parts’ to see the alignment…
Wydruk około 1,37 €–1,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
You can use these squares to easily level your bed. Print them out and then adjust each corner individually. If the surface is rough, lower that corner and if it's not sticking at all or you see gaps between the lines, then raise that…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Designed for TFK Joggster Adventure. The holder prevents the cup from tilting in all directions and also uses printed “springs” to compensate for movements in the vertical direction. Dimensions Inner diameter of the holder is 75 mm. The…
Wydruk około 6,14 €–7,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
After having no luck slicing an existing level 7 Sierpinski fractal pyramid, I generated my own using OpenSCAD. OpenSCAD took nearly a day to generate a level 6 pyramid, so I almost gave up until I found there was an experimental Fast CSG…
Wydruk około 87,94 €–107,49 € nettoWstępna wycena jednego wariantu
Created this so i had an exact fit with exactly .2m height on my Elegoo Neptune 4 Pro. Prusacliecer 3mf attached.
Wydruk około 0,24 €–0,30 € nettoWstępna wycena jednego wariantu
Info: inspired by great gyroscopic model from @phi.gl for stroller, I wanted to have it in the car :) Thanks for originil print! I used this ventilation connector shape from print by @icepick Designs (thank you too) I designed car vent…
Wydruk około 1,63 €–2,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update Jan 2024 - I added a third version (v3) with a center square and fewer connecting lines for faster printing / less filament usage! Update - I added a second version with connecting lines for faster removal from the bed Since bed…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena jednego wariantu
This is a parametric planter with a vented, self-watering reservoir and water level indicator. I designed this in Fusion 360 and have included STLs for a 4", cylindrical version with interchangeable smooth, fluted, and knurled variants in…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
This model is a remix of my previous bullseye spirit level stand that used an alignment stick. Now to get the path tight, we will use a laser! This print consists of the base and 3 thumb screws for leveling adjustment. A Ryobi Laser Cube…
Wydruk około 1,37 €–1,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Used to level my Creality Ender 3, with a 235x235 HotBed, but can also be used to level other printers.
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
so i remastered the original bed leveling model from my models, now everything fits better adjust the size with the % gauge on slicer
Wydruk około 0,48 €–0,58 € nettoWstępna wycena jednego wariantu
A 3 by 3 grid square of 20 by 20 cm and 0.2mm thickness to test the levelling of your bed. Works for the Ender 3 Print Settings Printer Brand: Creality Printer: Ender 3 Notes: In your slicer select your initial layer height to be 0.2mm or…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
a basic bed leveling
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
A great small thing! With this, you can set your plants at the exact hight you want them to be in the pot! And it also helps the plant not to stand in water. Important information: The models can be easily scaled to the right hight by…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
2020 Leveler Pads for Aluminum Extrusions - Stabilizer - with M6 Threaded Leveling Mounts Overall dimensions: 85x20x18mm double 50x20x18mm single Suitable for:…
Use this to set up your bed leveling correct. On the photo you can see, in the front right corner it is too far away, and in the front left too near. Print this, adjust your bed screws and then print again. Category: 3D Printing Tests
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Use this to test your bed leveling, this tells u if you have leveled your bed correctly so i remastered the original bed leveling model from my models, now everything fits better, and every piece is the same size and at the same lines and…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
Having found a monitor stand design that I liked, I wanted to make it more flexible, and so I added brackets for a second level. My model uses a shelf I had lying around, which was 16mm thick and 170mm wide. I cut it into two pieces to…
Wydruk około 5,10 €–6,24 € nettoWstępna wycena jednego wariantu
This is an updated version of my Prusa LACK Enclosure Levelling Feet . Like the original version, these feet can be used to level your enclosure on uneven floors, and - optionally - anchor the enclosure in place. This updated version has…
Wydruk około 3,02 €–3,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the remix version from Thingverse by shrop_pat. https://www.thingiverse.com/thing:4335944 This version cut down the height of the standoff to 3.9mm. so you will be able to use the calibration-z function on stock firmware. This is…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
IMPORTANT: USE THE ZIP FILE ONLY! The print file doesn't work!!! Here are the steps: Home the z axis. Make sure the nozzle just barely touches the bed at every corner. Load up the filament. Start the file. Every time the print pauses,…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
(English below) Erweiterbare Mehrstockklemme für Klemmen WAGO 221-2411 zur Montage auf einer 35mm-Hutschiene: Diese Mehrstockklemme besteht aus einem Grundmodul, welches auf einer Hutschiene aufgerastet werden kann, einem Aufsteckmodul,…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
It's a replacement barrier for the Lillabo (IKEA) wooden train level crossing. The original (red) barriers break quite easily. These aren't much sturdier (it has two pins either side, one of them has a small diameter, so can't really…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
Level Holder for Systainer This holder is designed for a Stabila Level (60 x 30 mm) and works perfectly with Systainers. Details: Printed in PETG with 5 perimeters for added durability. The clip-in version can be printed without supports.…
Wydruk około 2,85 €–3,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an expansion to the very good insert from Nextlevelboardgaming: https://nextlevelboardgaming.com/product/lords-of-hellas-quickplay-box-insert/ Everything fits into the Warlord Box and the monuments fit in the basic game box. But…
Wydruk około 4,69 €–5,73 € nettoWstępna wycena jednego wariantu
For English scroll down. Wer kennt das nicht? Das Anzeichnen von Löchern mit einer Wasserwaage ist nicht unmöglich, aber oft etwas umständlich. Aber mit diesem Modell wird es zum Kinderspiel. Die beiden Teile werden auf der Wasserwaage…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printers with floating gantries such as the Troodon 2.0 Pro are unable to hold gantry squareness (tram) if they are turned off, or if there is any kind of accidental de-leveling of the gantry. This can prevent you from printing, or even…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is for s 2022-2026 RAM Promaster. It slides over the cell phone holder. It works with vans with/without wireless chargers. Will Phelps at Alien Enterprises talked to me about reducing the cup holder print time and told me about his…
Wydruk około 11,67 €–14,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A remix of the model “ Prusa MINI Silicone Bed Leveling Mod - bed tightening jig” , with fully original parts but with strong inspiration from that model. A slightly thicker plate to better allow multiple colors to be used, with 90 and…
Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu
Required accessories: 1 x M5 Screw; 60 to 80 millimeters 4 x M3 12 millimeter 1 x M5 hot melt nut 4 x M3 hot melt nut 1 x M5 nut Locktite and plastic glue ¼ " screw Print settings: PLA 0,4 mm nozzle 0,2 mm layer no supports best 4 or more…
Multilevel Transport Bookends Because even people in the future megalopolises need their books kept upright. So do your part citizen! Print these out today! Do your part! Stay in the fight! Fear not the mutant, alien, and worse. Suffer…
Wydruk około 19,83 €–24,23 € nettoWstępna wycena jednego wariantu
This float is for a tube with an inner diameter of 8 mm. I use it to check whether my water stack is full or not. It is a watertight box with an inlet, an outlet and a reed float contact. There are gaskets for inlet and reed contact. The…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
End cap for PowerXT 24" level (YT24A00). One cap was missing on mine & the exposed metal was a bit sharp. This printed PLA part press fits tighter than the original. Print with the exposed end facing up. Full supports underneath since…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
As in the orginal: a clip to level tiles when glueing them onto the floor or wall. I printed mine in PLA, with a .2mm layerheight and .4mm nozzle on a Prusa i3 MK3S+. The provided gcode prints 12 at a time.
Wydruk około 3,57 €–4,37 € nettoWstępna wycena jednego wariantu
A simple Gridfinity bin for the Bosch Quigo Green Laser level cube. I found that other models for the Quigo (non Green) model do not fit. So I designed my own with slightly more space to accomodate the Quigo Green. The size of the cutout…
Wydruk około 1,88 €–2,29 € nettoWstępna wycena jednego wariantu
Motivation I wanted to run a bunch of accessories on my handlebars, so I needed to move the computer mount which originally spanned across the stem. Solution Uses the original hardware, which were button head screws. 2023-10-11 Lost the…
Wydruk około 1,28 €–1,57 € nettoWstępna wycena jednego wariantu
This is a 15x15x40mm bubble level holder for Vixen-styled dovetail bars. And the hole pattern fits dovetail bars made by MoreBlue. p.s. A slim version V2 is added.
Wydruk około 0,87 €–1,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
easily printed without supports or brim, just make sure your bed adhesion is good. Here is a link to it working:
Wydruk około 0,11 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A water level sensor without the need to put a hole in your water tank. The hall sensor or reed contact is placed outside of your tank! Place some magnets into the hole and glue it or print the a lid and glue the lid onto the float part.…
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
Vor- und Nachteile auf einen Blick: + modularer Aufbau zum einfachen Austausch und Entnahme der Silikonergebnisse + Druck kann durch Spritze aufgebaut werden um Lufteinschlüsse/Hohlräume zu vermeiden - würde es nicht an den Seiten bei…
Wydruk około 6,85 €–8,37 € nettoWstępna wycena jednego wariantu
-Englisch- As you can see in the photos, the original water level float is partly made of porous plastic. Over time, unappetizing residues are deposited on this plastic, which can no longer be removed. That's why I designed a new water…
Wydruk około 1,23 €–1,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I recently reached the mark of 5k downloads on my models, and I realized there is no official model for the Star of Design badges. So I decided to design my own badge =) According to Printables, the Red Giant (Star of Design Level 5)…
Wydruk około 0,91 €–1,12 € nettoWstępna wycena jednego wariantu
EN: For my old BD250 impact drill from Black&Decker, I reduced the recess to a 22 mm radius using the great idea from 3D-Kalle . Material: HT-PLA / PLA Layers: 0.3mm Supports: recommended in the area of the recesses for the spirit levels.…
Wydruk około 3,71 €–4,53 € nettoWstępna wycena jednego wariantu
Edit: V2 with a bigger Funnel is now available! I had issues with my 3d-printed Pipe for the Nextgrinder 64. I had to power off and on the grinder multiple times, since the beans where stuck to the outside of the pipe thanks to the…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
This 2-piece 3D model combines the functionality of two things: your desk phone stand, and a small tripod. Pixel 8 Pro is too heavy for small tripods so I created this to hold the phone leveled at flipped orientation when capturing…
Wydruk około 1,56 €–1,90 € nettoWstępna wycena jednego wariantu
I developed this repair clip as a remedy for your broken Levelor-branded vertical blind “vanes”. I was growing frustrated to find these vanes lying on the floor after randomly breaking at the attach holes. The vanes have a habit of…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
This is quite simple, but I learned how to properly use ShapeBinders in FreeCAD to do it so it doesn't break with adjustment. Unfortunately I have to edit the freecad file to make adjustments so for the time being this is set to 5mm…
Housing for the GZF-04 water level controller. Mounted on double-sided adhesive tape.
Wydruk około 2,14 €–2,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I honestly have never played Rainbow 6 but my friends say it good so I made this logo for them. It comes with a stand. I would recommend setting the scale to 300 but I made it smaller for a key chains.
Wydruk około 2,44 €–2,98 € nettoWstępna wycena jednego wariantu
Coole Wanddekoration für Pacman Fans.
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
It is a supported edition because my PetG is not good in bridge making. The support is very easy to remove, You not needed to have any tool for it.
This is a 15x15x40mm bubble level holder for the RA axis of JTW P75 equatorial mount. Four M5x10mm stainless screws are required for assembly. Bubble levels & screws can be purchased, for example, from Amazon.
Wydruk około 0,95 €–1,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A 3 X 3 grid of 1 layer high squares for checking that the bed is level. To be used when performing Bed Level Correction as described in https://help.prusa3d.com/en/article/bed-level-correction_2267 . Print instructions PrusaSlicer's…
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
Working from home often results in beverages and computer equipment sharing the same desk. This is a perpetually hazardous arrangement (and I speak from experience). This design is for a cup/drink holder that places the beverage below…
A simple bed-level test to make sure that your printer is leveled correctly !!only print one layer!!
A 3D printable Businesscard embosser, can be assembled without any hardware, everything just snaps together. I designed this businesscard embosser to be modular and 3D printable without using any support and without any hardware required…
Version 2 now available! Featuring thicker arms! Released along side the original HomeGrown3D newsletter! HomeGrown3D.com Read our article about the version 2 clips:…
When 3D printing, it is crucial to have a level print bed to ensure proper adhesion of the printed object. If the bed is not level, the print may fail to adhere properly and can potentially peel up during the printing process. To check if…
If you encounter significant variations in bed level, especially in one of the corners, consider printing these shims and placing them under the bed supports. By doing so, your bed level will greatly improve and become easier to adjust.…
Nearly 50% Reduced Time and Plastic Plus Separate Models for Individual Tests All-In-One From 6h57m to 4h8m 44g of material to 23g of material Separate Model Print Times Diameter Test - 32m 25mm String Test - 28m XYZ Dimension Test - 39m…
I simply took the STL file from the Prusa Knowledge Base and reworked it to fit the print bed size of the Prusa Mini. https://help.prusa3d.com/en/article/bed-level-correction_2267 Important Information about sheet markings FAQ Sheet…
This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…
Don't forget to hit the like button if this helps you :) A perfect calibration square print has alluded me since I got my Ender3S1. Sure I have lots of prints that work but most of them are smaller and around the center of the plate. If I…
A quick bed levelling test print for the Ender 3 V3 SE that prints over the locations that the probe measures to level the bed. Follow these steps for the best results: Level your bed using the auto leveling feature. Print this test.…
UPDATE: Added 1.1 and 1.2mm shims UPDATE: New version with markings. It doesn't require to destroy the top level of bed to install, like some modifications i've seen before. It's designed, so you can put it from the side and rotate into…
General I wanted a simple and fast test pattern that got to testing the farthest corners of my bed early in the print and then had plenty of time for me to adjust the z offset so that my prints would stick all the way to the edge of my…
See also 1:64 stackable sea container (works well with HotWheels) My other printables for 1:64 display I've also created more models that you can be stacked horizontally as well as vertically. Below is a preview of the display shelf you…
I remixed the original design to fit the Prusa mini
Yes, this is just a big flat square, but it is very important for making sure the bed is level, the z steps distance between the nozzle and bed is correct and whether flow or extrusion is at the accurate level. Bed Level - start printing…
Update 01/07/24 (07/01/24 for the rest of the world): “Wrench” model fixed to have looser tolerances so that there isn't any issues fitting over the knobs. K1 Max SCREWS_TILT_CALCULATE config added, screw locations courtesy of…
Locking bed leveling knob for the ender 3 s1/s1 pro. This design has snap features that keep the knob in place during/in between prints; so no more vibrating out of position or accidentally nudging the knob. The snap features also give…
This bed level test measures 185mm x 185mm x 0.4mm thick. Check and adjust you bed level before printing actual parts. Using this to set your bed will ensure maximum adhesion. The thickness is 0.4mm, which will translate to 2 layers at…
The original author of this test contacted Creality directly to get this bed leveling test. He also created a video testing the bed leveling and showing all the findings:
NOTE 2/01/26: Tool works great on the Centauri Carbon 2. Just received my CC2 and the back right corner was lower than all the other 4 corners. UPDATED MODEL : Since this tool seems to be helping people get the bed aligned I made some…
If you want to support my work, just buy me a coffee: paypal.me/predypavlovic CHANGELOG 18.02.2023 fixed the model size and changed the file name to “BIQU_BX_BED_LEVEL_TEST_220x220.stl” - thanks for the hint @kord2003
V5 For P1P and X1C As this is skipping the LIDAR but keeping the Bed Leveling if desired. Date : 5 March 2023 Improvements: -Improved the overall speed of the start gcode -Reduced the purge of filament by a factor of 21 times 5mm vs 105mm…
Remixed from https://www.printables.com/model/596800-ender-3-v3-se-bed-leveling-file Just added the connections lines in order to make it easier to remove the print of the bed. Also a bit more detailed checks. Description from original…
This is a parametric first layer test print generator inspired by Jeff Jordan's "Life Adjust" print. The generator is written in OpenSCAD and the source code is included. You can customize: The number of rows and columns to be printed.…
A quick Bed Leveling test. Adjust bed knobs according to the final results or adjust live. Final height of the print should be one layer tall comprising of a 0.2 mm layer height. I have included cad files but I don't think you'll really…
Designed for the big bed of 4 Plus 320x320 with 9 connected areas. With 1 or 3 layers at 0,2 layer height
Eine Form zum testen oder ausrichten des Bed-levelings.
These blocks have been designed to be used with the Ender 3 V3 SE and KE models only. Another user has verified that it will work with the KE model. The right and left side are slightly different heights as the plastic molding thickness…
A test print file exactly 220x220mm with a height of 0.2mm (one layer) to match the Creality Ender V3 KE's build plate, with squares at the points where the auto levelling sensor touches the bed. This has the bonus of allowing you to…
A simple single layer square grid to test bed leveling across the area of the bed. My bed level sensor was doing strange things so I needed a test to confirm the consistent inconsistency. Watching a single extrusion line go down is works…
Hi ! Fixing clip for the leveling wheel of the Elegoo Neptune 4 Pro 3D printer. It prevents the wheel from turning due to vibration. Over time, it also appears that the wheel is trying to turn even with the clamp. But this is a simple…
Print this to level your bed. Make sure that the bed is cleaned with isopropyl alcohol and has no fingerprints on it. This is one of the larger bed leveling prints which means that more detail will be shown. Use the leveling knobs under…
Designed this for my Creality Ender 2 pro. It can be printed on every printer. Update 12.12.2022: New version V2 with engraved L/R added. Check out the other ender2pro upgrades I have designed! Cover, Creality Ender 2 pro by eSeL |…
Very quick and easy bed leveling test. The squares are 20mm each placed on every corner and middle of the bed.
“The Rook” This is a Quick way to check your X-Axis Gantry is parallel with bed. And adjust Z-Axis rods to get them back in sync. The Rook was designed to be a quick and easy way to get your gantry back parallel to bed when it's knocked…
Everything you need in order to level your bed and calculate your zoffset. Video: https://youtu.be/_OnCugt-ESU
This is a recreation of https://www.prusaprinters.org/prints/36706-bed-level-test . I didn't like their instructions and the dimensions of the model, so I made my own. Print instructions Select the STL based on your desired layer height.
Update Aug 20 2025 In response to comments about the fit of the threads I am now including renders with increased thread tolerance gap. You can also make custom adjustments to the fit by editing the value of the ThreadToleranceGap…
![Silicone Spacer / [SMMT] SiliconeModMould Tower (Silicone mould for Bedleveling with Octoprint on Original Prusa and Fysetc Clone Mini Printers)](https://media.printables.com/media/prints/181689/images/1697328_5268f4c6-ef1a-47d1-95e3-9e08511482d1/img_20220412_163528_048.jpg)
