2182 modeli
The original file that I remixed is this , I have added new features to test. I added new things to test like stringing test and the write on the bottom. You can also test a lot of other things: bridging bed level stringing calibration…
Wydruk około 3,17 €–3,87 € nettoWstępna wycena jednego wariantu
Nothing more than a square, 0.2mm high so it prints a single layer. I use this for setting the Z offset. The printer's own Z offset calibration is a good start, but it can be a challenge to get the height just right if you haven't done it…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
First layer 60x60 mm square with 0.2 mm height 100x100 mm square https://www.prusaprinters.org/prints/10876-first-layer-test-100x100-mm-square Print instructions First gcode: PLA Second gcode: PETG
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to have a test print which I can use to test the dimensional accuracy of my printer and the print quality of my filaments. But it should also be pretty enough to keep as a color sample afterwards. So I created this 30x30x30 mm…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
Introducing Grabby the Claw! This model is designed to use all of the main connection types that you'll find in my 3D printable action figures. It uses only a few grams of filament, and prints in about half an hour on modern printers.…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
Calibration cube to test 3D printers. This is old version of my All-in-One Calibration Cube. If you want do download never one, click this link witch redirects you to new version or just find it on my profile among uploaded models.…
Wydruk około 3,27 €–3,99 € nettoWstępna wycena jednego wariantu
This is to help you get that perfect first layer and determine where you need to make adjustments on your 220x220 bed. The Model is pre-offset in slicer will print perfectly aligned with 220x220 build plate. Run Brim test first to dial in…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
This is an advanced calibration, recommended only to experienced users. For more information, read this article . Material Layer height | Fastest speed | PrusaSlicer profile </tr> 0.2mm | 45mm/s QUALITY 0.2mm | 60mm/s SPEED 0.3mm | 50mm/s…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Print and live adjust Z on the markers, you can start with larger increments (100, or 50) and then fine tune with smaller ones (10) when you are closer to your target.
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Tests from 195 - 210 for PLA on my Ender 3 w/ a Micro Swiss Hotend. Remixed from ([https://www.thingiverse.com/thing:2729076) https://www.thingiverse.com/thing:2729076 %5Bhttps://www.thingiverse.com/thing:2729076)] for testing my Ender 3…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
Updated Jan 3rd 2022: Now has tabs to allow travel farther to the sides, makes it easier to write on the values (added on both sides for righties and lefties). Also splits the grid into 4 distinct sections. Added 3mf and gcode for PC…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Small 1cmX1cm test and calibration cube Fast to print (10min) (0.5m, 1g) With many tests on it: Calibration 1cmX1cm or 0.4inX0.4in Overhang test Quality test Half sphere test Bridging test Bed adehision test Stringing test Small details…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
This model prints a whole layer on the Mk4 build plate, to test if it is as perfect as it should be It fits the whole build plate exactly and has the hight of 0.2mm Print with 0.2 layer height, to have exactly one layer can of course be…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Use the standard FLSun v400 standard 0.2mm CURA profile with: Wall Line Count = 1 Build Plate Adhesion Type = None PLA G-code file included for the V400 printer. It takes under 8 minutes to print at 25mm/s first layer speed. You can…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
test the quality of your prints by printing a cali dog
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
Print resolution: 0,20 Material: PLA
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Just your average XYZ cube with a few extras.
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
Thank you to GKMAKEIT for the original. I found this so helpful at getting the perfect first layer setup that I found myself using for all different types of materials - I have now remixed it for use on my Ender 3. In Summary, you adjust…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
Otto, the Calibration Butterfly, is a test model designed for Prusa CORE One+ INDX. We wanted to have a test model that you will not throw away after printing and assessing its quality. It is best to print Otto as a first print, right…
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
This is a Flow Rate Calibration Test specifically designed for PrusaSlicer , as it does not support per-object settings. These models are optimized to use as little filament as possible while still providing accurate results. There are…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
Calibration axis XYZ 20mm x 20 mm, R14
Wydruk około 0,39 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a calibration strip I have started using. It is similar to other notched strips except I have modified the g-code to automatically increment though a range of live-Z offsets. It starts printing at +0.1mm above the live-Z setting…
Wydruk około 0,05 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
First layer test surface that uses the whole printbed 210x250mm with 0.2 mm height. Can be used to visualize warped / uneven printbeds. The included gcode has the ooze free startcode sequence. Happy printing! Print instructions Ooze free…
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
Print this calibration tool and create little swatches you can go back to and read off the volume (in mm cubed) of material needed to purge a given color change. All 5 colors swap with all 4 of the other colors in each direction. That's…
Wydruk około 2,00 €–2,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the most important first print you need to print. It will allow you to Live adjust Z Hight. Very short print. In 5 minutes you will set the printer to print beautiful models. It is set to test PLA or PETG. If you use the stl,…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Imagine walking into a UV lit location wearing a picture of Darth Vader or Spock around your neck! It will immediately light up and will show everyone that the Force in fact is with you or you find something fascinating while raising an…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
I made my own first layer calibration with a bigger center square and horizontal infill and 45 degrees infill for the corner and side squares. This way you can easiely dial in your live z for the center and look at the difference early.…
Wydruk około 0,13 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello 3D-Friends, this is a ready to print gcode for Prusa XL to calibrate the k-factor for pressure advance (linear advance) for PLA. It was created with Prusa Slicer 2.8.1 and this great site:…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
A calibration block for 3D printers. This has gaps from 0.05 up to 0.5mm with labels on each one. Test it with whatever your preferred print settings are.
Wydruk około 2,50 €–3,05 € nettoWstępna wycena jednego wariantu
Prusa Mini full bed calibration test model for 0.15 and 0.2 mm layers. No need to start calibration print after calibration print. Print once, calibrate once. Because this model takes a while to print and fills the whole bed, you can…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
It's just a plane with thickness of the layer height. This can be used: To check if you are satisfied with bed level and your printer results (optimaly with Octoprint's bed visualizer plugin) To calibrate first layer as you can play…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena jednego wariantu
ADDED: ASA profile bed leveling pattern by jeffjordan READ and USE the patterns here: https://forum.prusaprinters.org/forum/original-prusa-i3-mk3s-mk3-assembly-and-first-prints-troubleshooting/life-adjust-z-my-way
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Yes, I know another one of these! Quick 4min calibration square.
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
ERROR in V2 Code ! Sorry! This was fixed in V3 In a recent post, Prusa introduced the K Values in the G-code of the Filament Settings, and since i had trouble with Multicolored print having a nice bond between the edges of the colors, i…
Wydruk około 7,68 €–9,39 € nettoWstępna wycena jednego wariantu
Calibration Cube - Furniture knob Simply print one of the two variants (with printed M4 thread or for threaded inserts). Suitable M4 screws are required, the length of which depends on the thickness of the furniture fronts. The print file…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
SUPER PINDA 1.5mm adjustment tool 1.5mm height adjustment tool to easy calibrate your SUPER P.I.N.D.A of your Prusa Mk3S+ / Mini+. Only 10 minutes to print. No support needed. Keep in mind : Always recalibrate the Z-live after a Super…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello, Today I have a 20x20 Calibration Cube for you. It is suitable for setting the ideal size of your print. I succeeded :-)!!! I used PLA/PETG as the material. No need to use supports If you are interested in my work, the links are…
Wydruk około 0,24 €–0,30 € nettoWstępna wycena jednego wariantu
This print is only 40 minutes, uses only about 1.5g of each filament. The layout matches the purge matrix so you can easily enter your values after eyeballing the clean point. You will get cleaner prints and probably save a lot of…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
Another quick test print to test retraction and get a calibration cube in 12 minutes on a Prusa. Measured from the base of the model, the cube is 10x10x10 mm with 1 mm thick walls.
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
print resolution: doesnt matter material: doesnt matter Don't forget add photo
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
A great bed calibration for that oh so important first layer. Intended for all Ender 3 but feel free to scale it to your bed size.
Wydruk około 1,12 €–1,37 € nettoWstępna wycena jednego wariantu
Start by following the steps/using the original gcode from jkoether : https://www.printables.com/model/360303-auto-incrementing-first-layer-calibration . Once you have chosen the best live-z setting using his original gcode, then use the…
Wydruk około 0,06 €–0,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Allows 5 (five) adjustments during one short (12 minute max) print Print instructions Recommend using 0.2 layer height (all layers). Start print at recommended first layer and temperature. Recommend adjust first layer adjustment. As…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These two models are designed for Prusa MK3S and Prusa MK3S+ first layer calibration. You can use the 30mm square or 25mm square design as you wish. There are gcodes ready to be used if you have one of both 3D printers. WARNING: This…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple first layer calibration
Wydruk około 0,78 €–0,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple Calibration for 300x300mm
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Self explanitory🙂
Wydruk około 2,53 €–3,09 € nettoWstępna wycena jednego wariantu
Hello, Today I have for you Calibration of the first layer test for all printers. Ideal for all printers. Contains models: 225x225 -256x256 -300x300 -350x350 -400x400 Beautifully set up the perfect first layer! :-) I used PLA as the…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
I designed , sliced and combined gcodes from 90% to 110% of extrusion multiplier in 5% steps. And also I designed tags for recording the experimental result with the conditions of date, filament maker, temperature and filament name. Small…
Wydruk około 0,64 €–0,79 € nettoWstępna wycena jednego wariantu
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Are you tired of sitting there and messing with calibration for live-Z adjustments? I know I sure am! Every live-Z system involves sitting there and fiddling with a knob manually, and I figured there was a better solution. Now there is!…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
The calibration cube is a great example for Prusa printers, when you set the first layer so the first print give this.
Wydruk około 0,61 €–0,74 € nettoWstępna wycena jednego wariantu
WHY?! I do a fair bit of massively complex functional prototyping. I used to have to draw a 3.10mm hole to fit a 2.90mm screw if I wanted my 14mm square hole to be 14.00mm. Now, I draw 2.90mm and get 2.85-2.95mm, and get my +/- 0.05mm…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Don't want to use your fingernails or scraper to pick the corners of your first layer calibration print off your pristine $35 steel sheet? I added a removal peg that solves this little annoyance. When you are done then just roll the peg…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These gcodes are made to print a single layer and to start from the lower left corner and go left and right to allow easy adjustment and should only be a 3 minute print using minimal material. The material needed is only 0.29 grams. Enjoy
Wydruk około 0,05 €–0,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Don't know what to do with all of those flow calibration cubes? Print this assortment box to give these cubes a second life. I have lots of different filaments and since i mostly print technical stuff, flow calibration of all of these…
Wydruk około 2,71 €–3,31 € nettoWstępna wycena jednego wariantu
Description This 3D-printed model is designed specifically for live bed leveling and first layer calibration. Its open layout ensures maximum visibility of all corners and edges of the print bed during printing, allowing you to monitor…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
A lot of people seemed to be having problems with wavy lines across the first layer of their prints due to too hot of temperatures, myself included. So I made this G-Code file in order to calibrate what temp you should use. DO NOT JUST…
Wydruk około 0,67 €–0,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remove FESTO fitting from MMU2S and insert calibration fingers and adjust FINDA sensor position so it is ON for 1.5 mm and 1.75 mm and OFF for 1.25 mm and 1.00 mm. The FINDA has a dim LED on its top, and its status can also be read from…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
Note that these parts were made for the VINCA 6" Digital Caliper, DCLA-0605 , so they likely won't fit other brands or models without modification. Step versions are included to facilitate this. These models are designed to allow calipers…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Remix of https://www.thingiverse.com/thing:2939079
Wydruk około 0,61 €–0,74 € nettoWstępna wycena jednego wariantu
Print the model with mostly standard settings and good quality filament. I used the following: Prusa Mk4 (IS) Prusament Galaxy black Default filament settings Default printer profile Prusa Mk4 IS 0.4mm Print settings 0.15mm STRUCTURAL 1…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
A remix of my original filament straightener model that is created for the minimum filament requirement contest. I hope it works for everyone!
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
A calibration cube. Tests your printers calibration.
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
XYZ Calibration Cube 30x30x30 Fillet and Chamfer
Wydruk około 0,87 €–1,07 € nettoWstępna wycena jednego wariantu
I have a MK3.5 upgraded from a MK3S, and a Revo 6 hotend on it. When ever i change the revo nozzles i like to quickly check if i need to adjust the Z height slightly, that is what these squares are for. Each set of squares is one layer…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Simple and stylish keychain Print orientation: The best result is achieved when using smoothing (ironing) Check out my own models and remixes: INSANEWAVE Also you can buy me a coffee: donation link
Wydruk około 0,39 €–0,47 € nettoWstępna wycena jednego wariantu
X, Y, Z Orientation Calibration Cube with Arrow Stand A great visual reminder of orientation in 3D space for anyone getting into the 3D hobby. Cube size: 30 × 30 × 30 mm Material: PLA Infill: 10% Print settings (Prusa i3 MK3): 0.10 mm…
Wydruk około 1,80 €–2,19 € nettoWstępna wycena jednego wariantu
A 20x20x20 mm cube for calibrating steps per mm.
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Hier findet Ihr ein Modell das Ihr für verschiedene Tests nutzen könnt. Vom Grund her ist es eine Erste Schicht Kalibrierung für z.B auf dem Prusa Mini Live Z einzustellen, jedoch kann es auch für Tests zu Temperatur, Flussrate,…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nozzle: 0.4mm Layer: 0.1/0.2 (Recommended)
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
50mm 100mm 150mm 250mm 280mm New step value = (current step value * required size) / measured size
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
My first creation. Suitable for printing testing. Can be printed without supports.
Wydruk około 1,65 €–2,02 € nettoWstępna wycena jednego wariantu
Im taking care of 3 spas, we have ICO Spa devices, which need to calibrate every 6 months. Set with 4x20ml of liquids and original plastic stand costs 31€ and 4x 500ml bottles from original manufacturer of liquids costed 124€. I made…
Wydruk około 1,89 €–2,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I used PrusaSlicer 2.6.1 with the latest configuration updates aligned with the recently released 5.0.0 Firmware for Original Prusa MK4 & MK3.9 . Print Settings Preset: 0.20mm SPEED Filament Preset : Generic PLA Printer Preset: Original…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
I stumbled upon these awesome bins implemented in CQ by @jdegs . And I had just purchased (accidentally) two sets of these calibration weights for a microgram scale. And, being a devotee of Gridfinity, I had a natural need that I could…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
Simplistic model to display your calibration cubes under a shelf on it's own holder
Wydruk około 2,08 €–2,54 € nettoWstępna wycena jednego wariantu
Default for nozzle 0,10 mm (you can edit in slicer or also directly the model in Fusion 360)
Wydruk około 0,06 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The unit is mm With the prusa mini printer, make borderless printing.
Wydruk około 6,49 €–7,94 € nettoWstępna wycena jednego wariantu
I made this calibration tower right after I switched to klipper. And boy it makes a difference. It has a little overhang and distance test (0.2mm) too. Dimensions: 20/30x40/50x60mm. Printed on an Ender 5+, BTT SKR E3MINI V3.0, Klipper,…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
This tool was inspired by a different tool I saw on this website by Dain. See here: With our models, both of us have the same goal in mind: We want to create 3D printed Lego-compatible parts, but we desire a perfect fit. Dain's model…
Wydruk około 0,95 €–1,17 € nettoWstępna wycena jednego wariantu
Hello, I have a Laser Longer Ray5 5W Calibration Roller for you. If you lose the calibration roller, this is your salvation! :-) It is fully authentic and works great for adjusting the laser focus. Good luck with the printing! I used…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
EN: To identify the control for the release or adjustment of a calibration procedure. To identify the calibration reference marks on scales. To indicate that the equipment is in calibration mode. DE: Kennzeichnung der Steuerung für die…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
Calibrate your 3D printed Doplo Blocks Get the perfect fit each time You have an idea for a 3D printed Doplo Block. You little at home is going to love it. You print it. It's too tight. Or it's too loose. You increment your tolerances,…
Wydruk około 2,24 €–2,74 € nettoWstępna wycena jednego wariantu
A calibration setup for accessing positional accuracy at various XY vectors.
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ein ganz einfacher Calibration Cube.
This is a simple calibration test cube for your 3D printer with X, Y & Z written on the axis. Print instructions Rafts: No Supports: No Resolution: Infill: 15 Filament_brand: Filament_color: Filament_material:
TL;DR First layer calibration howto which works for anyone. To get a free Spool of Prusament use one of this Promo Links for your Printer Order. Prusa Core One+ Kit Prusa Core One Prusa Core One L Prusa XL Collection tools, 3D printing…
Update January 11, 2022 Thanks for the feedback so far, great to see so many makes! I've optimized the bottom thickness to save some material and it will also print faster. I've also uploaded new versions that are only half as tall for an…
Introducing the Orca Cube! A functional calibration cube — don’t just throw it away; you can store small bolts and screws in it. ;) It's a bit challenging to print it nicely, but with a little calibration , you can do it. It's quite…
A perfect simple calibration cube that also tests overhangs with its 45 degree overhanging edges, I've also added a cube with no overhangs if you want. 20mm x 20mm x 20mm 0.2mm layer height and a 0.4mm nozzle 20% infill 100% fan speed…
Video link: https://rumble.com/vb9fxr-3d-printer-first-layer-calibration-process.html This is a 3 x 3 inch square used to help calibrate that oh so important first layer. This seems to be one of the most problematic asked about questions…
XYZ Callibration Cube 20x20x20 Created long time ago with help of tutorial below but i used F360 instead: https://www.idig3dprinting.co.uk/news/how-to-guides/create-a-3d-printer-calibration-cube-in-freecad/
The Voron Design Calibration Cube: a precision tool tailored for optimizing your printer settings to achieve the best results when printing Voron Design components. Designed following a comprehensive set of design principles, this cube…
🎥 Watch the video tutorial In the video, I explain: -How bridge flow and speed affect the print. -Why more flow gives smoother results. -How to tune these settings in OrcaSlicer . -How to combine this with Tree Supports → “Critical…
Note: printables.com is being very opinionated about these gcode files and won't allow most of them to be posted. Please find all the gcode files on thingiverse here: https://www.thingiverse.com/thing:4714033 . Refined Bed Leveling &…
Nearly 50% Reduced Time and Plastic Plus Separate Models for Individual Tests All-In-One From 6h57m to 4h8m 44g of material to 23g of material Separate Model Print Times Diameter Test - 32m 25mm String Test - 28m XYZ Dimension Test - 39m…
This object can be used to calibrate linearity correction factor for extruder motor. More info in https://help.prusa3d.com/en/article/extruder-linearity-correction-calibration_2254 Print instructions Print with PLA
![Calibration Cube [CZ: Kalibrační kocka] [SK: Kalibračná kocka]](https://media.printables.com/media/prints/211029/images/1934973_e67afc1f-8c1a-468f-b588-310b0bd589a2/snimka-obrazovky-2022-05-22-100430.png)
