Labeliing Template
Used to label wooden pallets with spray can.
- Pobrania
- 5
- Polubienia
- 2
- Ocena
- 0
137 modeli
Used to label wooden pallets with spray can.
The VoronLightweightXCarriage by Vitalii3D 🥰 is a fantastic lightweight carriage for the Stealthburner but I was not happy with the existing cable management solution for a ClockWork 2 setup. So, time to make some parts. The Features A…
Housing for the LiIon 18650 battery tester, charger, discharger. Consisting of three stl-files: Main Housing Safety Grid for the two power resistors (protects your and others hands) Three knobs for operation Printed on my MK3S+ in PLA,…
This is an adapter so one can use common 18650 LiIon cells instead of 26650 cells in a tubular receptacle. It should be printed in vase mode. I printed the one in the photos at 0.34mm layer height and 0.4mm perimeter thickness. The cell…
This is a remix of a great project. Source: https://makerworld.com/en/models/1844353-the-mochi-housing-and-inner-frame-dasai-mochi#profileId-1970817 I added a 16340 Li-ion battery and a TP4056 USB-C charger. You'll also need an SS12D00…
Simple cage for 21700 liions in 6s1p and 6s2p configuration. I designed a simple universal Version without "feet" and a Version with “feet” so the packs fit and rest secure on the topdeck of the Falcon 7 frame. Also there is a connector…
Vitalii CNC Aluminum Gantry Z-Chain/Endstop Mount/PG 12 gland
Please print from ABS or any other high temp material using official recommended Voron settings. A4T/XOL Mount
Zapraszam do filmu z budowy powiększenia Baterii do kosiarki Briggs&Stratton InStart 775IS… - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam: https://www.magazynowanie-energii.com - Lista wszystkich…
These parts are for Voron 2.4 Vitalii CNC AB Drive Units. Added Top Bearing Mounts for the AB Drive Units based on Hartk1213 Micron R1 Double Shear Mounts using F695 bearings and longer shaft steppers (OMC 17HS19-2504S-H 55mm). Changed…
I used TPU to print that case. My goal was to store 4 batteries in the smallest possible way. Print Settings (depending on your chosen material and printer capabilities) no support needed 0.2-0.4mm layer hight 3-4 perimeters 3-5 top…
After 1 ½ years of posting my Motorized Filament Feeder, a new machine was posted in Printables. The “Bowden Speed Loader for Prusa XL and CORE One and similar for loading filament” designed by @MrFlippant inspired me to do a Printables…
Holder for JETI Power Ion 2600A 2S1P receiver battery pack or similar 2S1P Li-Ion battery packs suitable for fixing into a model using four servo screws. The model is supposed to be printed from PETG to withstand elevated temperatures…
Three versions to use 18650 batteries in 26650 flashlights. Print instructions Print with vase mode and a 0.4mm nozzle to get the right dimensions.
Zapraszam do filmu z budowy akumulatora Li-ion z ogniw 18650 do autka kolegi :), wykorzystane ogniwa 18650 oraz BMS 3s 60A… - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam:…
Adapter to use Makita LXT 18V batteries in older Bosch 18V NiMh tools. Tested on Bosch 52318 jigsaw. Uses Bosch upper adapter and lock bars by PhNxx: https://www.thingiverse.com/thing:4725237 Requires: 8x M4x8 SHCS 8x M4 hex nuts Makita…
Nergaliid from Critical Role, Remixed from Hezrou model by Yasashii https://www.thingiverse.com/thing:4960223
For my flashlights 14500 battery I needed a charger fitting the protected version of a TP4056 because those I had laying around. So i grabbed the AA charger holder from enif and designed a holder for the charger board in Fusion360,…
An ideal wall holder for the LiitoKala Lii-500 charger that will allow you to free up space on your desk. Simply print out the holder and place your charger(s) on the wall. The holder has 4 holes with a diameter of 3 mm in order to use…
Hello, I noticed while using my Chaotic Labs carbon fiber tubes, the x-end stop piece for Vitalii3D Super LightWeight Carriage came up short. I made a part that will now ensure that the end stop will hit the end of the carriage. Also…
Construction : Case include 5 different parts. All this parts 100% printable without any supports. Material: lock_liitokal_s2_x2, petlya_liitokal_s2_x2, top_liitokal_s2, bottom_liitokal_s2 were printed by PETG from ABG. liitokal_rubber -…
Universal Monsters - Frankenstein - It's Aliiiiive! - 1931 3D printable model.
I designed this simple holder to attach my LiitoKala Li-600 battery charger to the stud of my Ikea Ivar shelf.
This is an adapter so one can use common 18650 LiIon cells instead of 3xAA cells in a tubular receptacle. It should be printed in vase mode. I printed the one in the photos at 0.3mm layer height and 0.4mm perimeter thickness. Dimensions…
Clip for holding the window washer rail in place. 3 Versions for different wipers. STEP file included.
Wall bracket for battery charger LiitoKala Engineer Lii-500 Print instructions Printed without support
Update 11/2025: Updated the brace so it does not interfere with the Cartographer connector. Also made a few more cable management cutouts for more routing options. I was having a hard time getting consistent results from my Carto/Beacon…
Another LiIon Charger case. Biggest problem for me was until now, that good cotact to the LiIon battery was mostly poor. PLA is pretty brittle and not a good material for spring loads. So I decided to create a steel spring load with M4…
Back Housing for "LiIon 18650 Battery Manager"
This mount is held in place using the metal spacers that come with the Vitalii kit. The switch is held on with a M2x8 self tapping screw. also has a spot for a 2pin JST connector to make plugging in and unplugging the switch easier. Link…
Just another box for LiIon batteries, type 18650. The specialty here is the built in Voiltmeter and the On-Off-Switch. Feel free to make your 3.6 Volt or 7.2Volt Accu. Go in Parallel (3.6VDC) or Serial (7.2VDC). Get rid of sorrows to…
LiitoKala Lii-S8 Skadis mount
A nice looking Holder for 18650 akkus. Its designed for storage, fast insert and removal. Not designed for akku welding. Print with 2 wall lines and 5-10% infill works for me. Or take 4 wall lines with 0 infill. There 2 stl files: drill…
This a battery box used to replace the old battery that contained Ni-Mh batteries with new LiIon batteries. You can follow the link to see the results: https://www.youtube.com/shorts/p5KDYzAk8KI?si=tkCB9g9bsyi69 You will need a BMS 4S 40A…
Multiboard holder for LiitoKala Lii-PD4 Battery Charger using 2 Push fit Connectors. There is a Reinforced version with a stronger Bottom Bracket. I have NOT testes this one yet.
When you use the Vitalii3D XOL/A4T Mount for Voron Printers it's possible that your Beacon/Carto is hitting the hotend. In my case it was the Trianglelab Dragon Ace Volcano where Beacon hits the sock/heater block. The hotend is also in…
I wanted to create a functional design charger. What you need: 2xTP4056 LiIon charger modules 2+2 contact plates plus / minus 2+2 green and red LEDs 2 voltmeters Micro USB-breakout board USB-C breakout board Some cable and shrink tube,…
Just a few and simple (but useful) battery holders. Most other holders didn't fit my needs so I designed my own. They're a bit oversized for printers with poorer print quality. (d=19mm) Print settings Material: PLA Infill: 10% (but ig…
LiitoKala Lii-PD4 Skadis mount
This is a remix of the X endstop holder of Vitalii3D-xyz's MetalTap . My Voron 2.4 Formbot kit included the X/Y endstop PCB that is mounted on the gantry. TAPs assembly assumes the X endstop to be on the toolhead itself. I wanted to keep…
Holder for mounting LiitoKala Engineer Lii-500 on IKEA Skadis peg board.
For an upgrade to lithium battery, you need to swap the dc charge port to ac. This plate allows bolting a new 110v ac male port to the cart. just cutout the old charge port and bolt up a new one to this plate. looked around forever and…
After I accidently dropped my LiIon battery holder for 2 18650 I did not want to fix this by scotch tape or similar. So I designed a new lid, printed it, little file-off work and here it is! Advantage is if you have several of these…
I created a Powerbank for 18650 Liion. Most parts are recycled parts: 3x 18650 Liion (in my case 2400mAh) 1x step up module 5V 1x connector cable (in my case a micro usb) 3x M3x20 screws The cell package is spot welded. See my Spotwelder…
Higher Lid for the RadioMaster TX16S - designed it, so I can use 26650 8000mAh LiIon batteries while my 5000mAh LiIon was not enough for multiple days on the flying field. If you need a different height, maybe for 4x18650, let me know and…
holder for the Lii-500s charger, which is designed to be attached to the wall
3D Printable case for Adafruit Lipo Charger https://www.adafruit.com/product/259 Print instructions Category: Electronics Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Supports: Yes Resolution: 0.2 Infill: 30% Filament:…
Wallmount for LiitoKala Lii-500 charger, compatible with HSW
Y-Endstop for Vitalii CNC Ganrty Included is a Blank, Voron logo, and Stealth Changer logo Install the CNC Gantry parts first. This endstop sticks out .5mm and will interfere with squaring up your gantry. The only extra needed parts are…
This is a simple case for the Adafruit Micro Lipo USB charger. It snap fits together (or you can super glue it). It will hold the included power cable inside the case. The two holes on the front allow for the LED light to pass through if…
I am using sensorless xy homing, so I wanted this improved/modified version without the endstop switch part.
I used the leftmost item from this store https://www.aliexpress.com/item/1005008053423575.html I used 9 mm battery strips for the connector.
This charger can be used with TP4056
For attaching soldered or spot welded strips / cables it helps a lot, when you have a reasonable holder by hand. Therefore I designed two possible holders. Each one can be used for 1s, 2s or 3s LiIon batteries. Fits LiIon, LiFe cells of…
This is a battery adapter that will allow you to insert D cell batteries into a LiitoKala Engineer Lii-500. I included the Fusion 360 file, so you can customize it to fit other applications, but odds are it will fit most 4+ 18650 based…
Succulents Box: Split Rock Cluster (Pleiospilos Nelii) Not just pretty to look at, but also practical! Can be used as: jewellery box gift box sweets jar organizer of small items secret hiding spot collectible succulents - got to plant…
These are medallions for the upcoming Super Bowl LII (52). The one design with the eyelet can be hung on a ribbon or string and given as prizes for each touchdown a team makes and the other design has a curved back so that it can be…
I bought this cnc x carriage https://www.etsy.com/listing/1639526932/super-lightweight-carriage-for-voron because the dragon uhf made my plastic x carriage heat sets fall out due to the plastic mount softening up from the heat. I also…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
I was building my second Vitalii TAP and realized I didn't have any more of the correct opto sensors for it. But I did have a few left over from my purchase of 5 cheap ones a few years ago. So I modified his Wired Optical Sensor Mount.stl…
cooling for charger LiitoKala Lii-M4 https://youtube.com/shorts/f0DtGn6g7zw fan 5в 4010 https://ali.ski/CIVgF9 USB-C https://ali.ski/Q4Yon
Redesigned extruder adapter (Sherpa Mini pattern), redesigned hotend mount (single piece vs two pieces), Beacon probe support. Stuff is being tested, BOM and guides will be added sometimes in the future.
I designed a Housing for two 18650 LiIon Cells, to use with my Fatsharks. You also have a little space on the outside to mount a capacity/voltage indicator board (I used one from banggood for 2s) Today I got the cells and installed them.…
print 2 of these in tpu and build your pack in this shape, it fits in the NG really well.
Keep your workspace tidy and your batteries fully charged! This custom 3D-printed holder is designed for the LiitoKala Lii-600 battery charger and a 6-slot 18650 battery organizer , perfectly compatible with the IKEA Skadis wall panel…
PUG mount for the Vitalli Aluminum CNC Voron 2.4 A motor mount.
A table stand for LiitoKala Lii-M4 for placing on a table to save space and easily view information.
LiFePO4 LiitoKala 3.2V 20Ah - MODELLiFePO4 LiitoKala 3.2V 20Ah - MODEL
Heres minimalistic Skadis holder for my battety charger LiitoKala Lii-PD4. Print it on the side
I created this updated PUG mount for the newer double shear variant of Vitalii3D's Trident AB mounts. I used the original design idea here and integrated a few variants of the popular PUG design. It should slide right into place with some…
PZ Probe Mount I printed with typical Voron print settings in ABS. I did use supports on the face adjacent to the stepper motor - that side is not visible. Mount to carriage with M3x6 BHCS, and mount board using screws supplied with the…
Used 4PCS LiitoKala 3.2V 20Ah/25Ah Lifepo4 Battery4PCS LiitoKala 3.2V 20Ah/25Ah Lifepo4 Battery LiitoKala 4S 12V 100A BMS LiFePo4 Battery Protection PlateLiitoKala 4S 12V 100A BMS LiFePo4 Battery Protection Plate
Bottom uses directional snaps, top uses normal. The top one has 2 version - normal doesn't have any play and “loose” has more play.
THIS MODEL IS A WORK IN PROGRESS This is designed to better mount an LDO Nitehawk NHK-36 cable (Described in the docs as "fully overmolded") to a Vitalii CNC EBB36 mount rigidly, including the spring steel umbilical guide. Personally I…
Do pobrania mój projekt przeróbki baterii Pegasus Ebike - Przeróbka z Ni-Cd na Liion 18650. Film z budowy: Pliki CAD w formacie STP:…
A quick remix of effendi 's model to allow mounting on a rack shelf with 25mm spacing. Nothing fancy, just works. Made to work with 6mm server rack bolts with 12mm head.
Made from pics I found & liked. Models may not be perfect. Made to 150mm (may differ due to pose). Made in STL & 3MF.
Parents around the world face similar issues, including the problem of tonnes of batteries ending up in the trash from electric toys. My daughters also often get toys powered by traditional disposable alkaline batteries. So I often…
Alea evangelii , which means "game of the gospels", was described, with a drawing, in the 12th-century Corpus Christi College, Oxford manuscript 122, from Anglo-Saxon England. It was played on the intersections of a board of 18×18 cells.…
Mounts to Vitalii carraige for goliath-hextrudort-cpap-beacon combo.
I have found several models for LiION battery. But no of them has proper size for Sony's NP-BX1. I has been used male BEC cable e.g. this one . Please use at least ABS. Other materials has low melting point and you can demage charger…
I use this packs to power my goggles, because I don't like having loose cables hanging around to my battery in the pocket. The 2s5Ah battery lasts me one complete racing day and recharge takes around 3-5hrs, depending on your USB charger…
A locking holder for an 18650 battery designed for the Liitokala Lii-100C charger. It does not allow the battery to jump out of the charger, protects against distortions, and holds itself securely to the case. The default height of the…
printed in TPU, i got good results with 15% infill, concentric infill pattern
This is my remix of curly_cz's great Taranis Q X7 LiIon 18650 battery holder . I removed all horizontal fillets as my printer frequently makes a mess of them when printing at low resolutions. I also removed the supports in the XT60 holder…
Just a quick wall mount you might also want to use. It does not need supports. Print in PETG I made one in PLA, and it is holding up, but the retention clips will fail at some point. I designed it with a better opening for the USB ports,…
Cable support for the Vitalii3D CNC EBB36 Mount, specifically for the EBB36 Gen 2 and Orbiter 2.5 configuration. I have designed it to be a very tight fit around the CNC Mount. Make sure the mount is pushed all the way into the plastic…
Uses 2 m5s, 3 m3s (one optional), and two m3 heated inserts. I've run this for 200 hours without issue. I use the secondary cable hole for a camera and the primary/PUG for my umbilical Model references the actual cnc design files from…
Must be printed in PETG, as it relies on flexibility of material
DE: Ein praktischer aufschraubbarer Trichter für melii Snap & Go Pods mit Verschluss. Dieser eignet sich um, z. B. Pulver schnell in ein kleineres Gefäß zu füllen. Wenn dir mein(e) Modell(e) gefallen, hinterlasse mir bitte ein Like, um…
I don't have an iMax B6 on hand, so I decided to use Liitokala's charging, which has a test function. I modeled an adapt
I printed my one using white ASA material using .3 mm layers in draft mode. If you care about precision and less visible lines, surely it is possible to print using more precise settings. Printing time in my case was over 3 hours.
I like the vitalii3d XY joint, but the adapter for the end stop is out of date. I updated it to have a notch for the lip on the right joint as well as moving the holes to fit the hall effect endstop. I hope this helps others.
Useful for modelling, for reserving volumes or just for fun.
A cover for the Vitalii3D CNC Front Idlers that helps your Jabberwocky cutting arm compress fully to cut filament.
The holder is designed to be installed on openGrid using openConnect latches.
I have a trident, the Vitalii3D recommended mount makes the carto too far back and can hit the middle rear leadscrew. None of the other models I could find worked. So I created my own. y_offset: 22.5 I have two versions, one with just…
Printed mine in PCCF but I am sure ABS/ASA would be fine. After the first one melted from being too close to the hotend I just didn't want to risk it.
This is a very basic cover or holder to keep a 18650 battery contact and an basic 3 digit voltage checker together. you need: 18650 battery contacts like this…