Case for LILYGO TTGO VGA32 V1.4 Controller
Case for LILYGO® TTGO VGA32 V1.4 Controller you will need the LILYGO® TTGO VGA32 V1.4 Controller…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
- Pobrania
- 147
- Polubienia
- 3
- Ocena
- 0
576 modeli
Case for LILYGO® TTGO VGA32 V1.4 Controller you will need the LILYGO® TTGO VGA32 V1.4 Controller…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Wall art: Butterfly on lily (two colours)
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
A travel “case” to let you take your Lily58 on the go! Fits 3D printed cases such as Lily58 Pro High Profile Case , Lily58 Case with 7mm standoffs , and Lily58 Case Requires 1 Plate, 4 Legs, and 1 large rubber band
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
WATER LILY FLOWER, KVĚT LEKNÍNU
Wydruk około 11,53 €–14,09 € nettoWstępna wycena jednego wariantu
Wall art: Butterfly and lily (four colours)
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
The first one milimeter print by transparent filament.
Wydruk około 0,75 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Allow the print to cool completely before removing it from the print bed. Remove from the print bed very carefully. If you need a different size, please adjust the size of the model according to your own needs.
Wydruk około 1,23 €–1,50 € nettoWstępna wycena jednego wariantu
wall art, coaster, earrings, pendant, keychain (two colours)
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Allow the print to cool completely before removing it from the print bed. Remove from the print bed very carefully. If you need a different size, please adjust the size of the model according to your own needs.
Wydruk około 2,17 €–2,65 € nettoWstępna wycena jednego wariantu
Commercial Use and Attribution Notice Alley Chat TD1 © 2024 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses for sale, is permitted…
Print one of each (my settings are below). Then place the spadix inside the flower flat side down and push the bumps through the hole in the bottom of the flower until it stops. Then align the bumps on the spadix with the bumps on the top…
Looking for another flower to print? Want to support me as a designer? This year's vase mode flower design is a hibiscus, and I'm selling it for $5 USD. -- People have really liked the Spiral Vase Rose I shared for Valentines last year,…
🖤 The Honest Shelf - Modern Art Decor Collection // Vol. 19 🤍 Elevate Your Space with Elegant 2D Line Art ✨ A pair of sophisticated, minimalist flowers—a Rose and a Lily—designed to bring a touch of botanical beauty to any setting without…
Commercial Use and Attribution Notice: Alley Chat TB1 © 2024 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses for sale, is permitted…
That's a case for the famous LILYGO T3 LoRa device, with room for a standard 3.6v LiPo battery. No screws needed, you can just print it and close it with the device inside. No supports required. PETG is better but PLA also works well.
This is the classic version, there is a new version here . Commercial Use and Attribution Notice: Alley Chat TS1 © 2024 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use,…
One of the many French lilies. You can use it as jewelry if you print it from resin and make it from metal. Or print in a larger size with fdm, e.g.: as an ornament, etc. Or add another plan. Your choice. =) Update.: The previous version…
Jiji & Lily (Kiki's delivery service)
For the past year and a half, the Lily58 has been my trusted daily driver, delivering a gratifying typing experience. As the first mechanical keyboard I built, it holds a special place in my heart. However, most kits out there disappoint…
This is an updated version of my TS1 case. The biggest change is the ends come down from the front the same way as the TB1 and the upcoming RAK case for consistent styling and function. This one doesn't require you to remove the SMA nut…
Enclosure for the LilyGo TTGO T-Display ESP32 development board. The enclosure provides two button levers that will activate the board buttons, a port for the USB C connector, a recessed leaver for the reset button on the board. It also…
I recommend the following: Keep the two sets of (3) base pieces (rectangular shapes) together when pulling everything off the card. The groups assemble together first to create two triangles, and then combine to form a…
Lilygo T Display S3 AMOLED Case ****************************************************************************************** **Update 20Feb24 ** Added a new top file modified to suit the new S3 which now has a flat acrylic embedding of the…
Requires eight 12mm M2 self tapping screws to assemble. It's recommend to seperate the parts in your slicer. If you print it as-is they'll stick together. T-Beam_Supreme_midframe_buttons_update1.3mf contains some updates that make the…
Play with this fun telescoping concentric ring flower fidget and feel your worries melt away! The stem superglues on or can be left off if preferred. No supports or brims needed. Model photos were printed in Matte PLA (for the flower) and…
- NO SUPPORTS NEEDED. Print as is (Thank you Alley Cat)!! - (2) M3 x 6mm Socket Head Cap Screws (BATTERY I USED) 504050 - 1500mah https://www.ebay.com/itm/387026120507 (GPS I USED) https://www.amazon.com/gp/product/B09LQDG1HY/ (ANTENNA I…
I created this as a project in Fusion 360 using Sculpt. I found that the printed head lends itself to heating with a blow torch/heat-gun to soften and manipulate the edges if you want them a bit more random and organic if making a bunch…
DIY Handwired Split Mechanical Keyboard | The Ortholily This is my DIY mechanical keyboard design. It is split, handwired, ortholinear and 3D-printed. The layout is based on the Lily58 but ortholinear and capable of tenting. Some Notes:…
A nerd at heart and a total witchcraft buff, Lily's thirst for knowledge once led her into the Enchanted Woods, where an incident involving a firefly and a carnivorous plant would change her life forever...
Elegant Lily Flower Wall Art
Modified Lilygo TTGO Lora case to include 1000mAh or 2000mAh batteries. In the future I'll include a place for a switch, as currently is always on, and the Meshtastic version for Lilygo TTGO Lora is not going to sleep when disconnecting…
If you LIKE this model PLEASE hit so I get credit, this will encourage me to make more models like this, thanks! Case for the LILYGO LoRa32 V2.1_1.6 Board and 18650 LiPo Battery. I used this is for the MySondy GO Project:…
The Lilygo T-Echo Meshtastic communicator, https://www.lilygo.cc/products/t-echo, comes in a case but all three important buttons are exposed to being accidentally pressed. This bracket protects the device from such accidental button…
Remix of a case for a Lilygo esp32 board, but with a mounting flange and case snaps. Use M2 screws for the bosses, the mounting flange holes are 4mm in diameter.
Commercial Use and Attribution Notice: TDeck Plus 8000mAh Back © 2025 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses…
The 3D model is a case for the Allium58 GLP keyboard. The keyboard is modified from Lily58 Pro. The bottom case can also be used with other plates with 1.2mm thickness. Parts to be printed Allium58 bottom case Allium58 bottom case…
🖤 The Honest Shelf - Modern Art Decor Collection // Vol. 17 🤍 If You are interested of my other Designs, feel free to visit me under 👉 https://www.instagram.com/cozy.craft.studios/ Botanical Elegance: A Timeless Poppy & Lily Duo ✨ Bring…
All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668 Support my work: https://ko-fi.com/modsmthng Latest update (12 June 2026): Reduced the screw hole diameters, increased the wall thickness…
This is a case that will fit the Lilygo T-Internet-POE board, I am using it for a bluetooth proxy for Home Assistant. But made it with other uses in mind as it has an opening for the TF card and the USB-C connector, so those can be used…
Using Infalivia's original design of a small frog, I have made a small Lilly pad designed to float in the bath with the frog on top! Print as many as you would like to create fun bath time with frogs all around! Infalivia's design looks…
Uses any 1.5mm plate, including the 3d printed one here. Designed for the 3mm heat set inserts from McMaster.
This Backplate / Bracket provides protection from accidentally hitting the two exposed buttons on the side of the device while also giving you a place to hook a carabiner or cord for easier carrying. The bracket was designed to contour…
Osteranhänger für den Osterstrauß weitere Modelle: Küken im Osterglockennest Osterhase mit Pinsel Osterhase mit Eiern Ei mit Tulpen Osterhase mit Schmetterling Osterei mit Maiglöckchen Küken und Maiglöckchen Osterhasen unterm Baum Osterei…
By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in the future. Main features: free space in the shell for other modules; fastening only with magnets (8x2 mm); holes for…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
Lilygo TDeck case for Meshtastic with a Battery, GPS Radio, LoRa Antenna. Full tutorial on how to build out the T-Deck can be found on YouTube here: https://www.youtube.com/watch?v=2PB-nGgZSpQ Parts Needed: 955565 5000 mAh Battery:…
This is a very popular flower type in my country around Easter. I just wanted to see if I could draw and print ir. A matt yellow fillament, looks really great for the flower. Both the stems and the flower can be printed without any…
This is a remix of krakers665's case . Changes from jeepers01's case : USB C slot instead of micro USB, so it fits lilygo T3-S3 Changes from krakers665's case : Enlarge LED indicator holes Add a light barrier between LED indicators Use…
Small case for the LilyGO T-CAN485 ESP32 board. Top held on by press-fit, bottom can be mounted to something using double-sided tape (don't print on a textured bed if you plan on doing that). Be aware that for CAN and RS485 the DC-DC…
A minimalistic NerdMiner/LilyGo T-Display S3 case. Print face down without supports. Insert the Display at an angle on the USB-C side, then lightly press down the other end to snap it into place. Don't press on the Display, it's fragile.…
A case for LILYGO T5 4.7 inch e-paper esp32 board, has the space to add a 3,7 Li-Ion cell battery. Print guide Print how is placed in the file, add brim and fill (20/15%). You can choose to add supports (i recommend) or not, but it will…
A simple yet cool case for T-Display-S3 ( link to produc t), without touch. I made it in FreeCAD and used the original step file as reference ( can be found here ). Just print the both parts (orient the top part flat on the bed in…
TPU case for the LilyGO T Embed & T Embed CC1101 since I couldn't find one! I suggest using TPU 95A or softer for the case if you have antennas/SMA connectors, since they do take some effort to put on. Otherwise, there shouldn't be too…
An enclosure for the lilygo T-CAN485 with visible LED and access to boot and reset buttons. A holder for the enclosure with cable management and a hook to attach the assembly to a Marstek Venus battery.
I designed this case for the "Lilygo T-Display-S3 Touch Development Board" which features a 320 by 170 color display and a touch screen. I'm planning on using this board in upcoming projects and decided to create this case for it. In…
I created for my Aurora Lily58 PCB Kit with MX switched from splitkb.com thie case. I used for the Oleds this Model: Aurora Lily58 Oled Housing PCB Hardware that I used Aurora Lily58 PCB Kit from splitkb.com with: RGB Underglow, RGB…
This is a case for the LILYGO® TTGO T5-4.7 Inch E-paper display ( https://www.lilygo.cc/products/t5-4-7-inch-e-paper-v2-3 ) together with a stand. Please note that this design is only compatible with the “v2.3” or “plus” variant of the…
I found the knob to slippery so made a simple grip ring.
I printed everything with 15% infill, then assembled everything with superglue and clamps. Refer to photos with assembly instructions: The Blue areas are the triple white part and the Orange area is the normal white part. Glue the green…
This is a remix of the thingiverse model with more space for the battery and a few little modifications. Most of the modifications where done in PrusaSlicer and can easily be modified. I also changed the size of the holes for the magnets…
Required Hardware: Lily58 PCB kit & plate from any vendor (there are a lot) 10 x M2 heatset inserts (any should work) 10 x M2 screw 8 x 10mm rubber bumpers I screw my PCB to the case from above the plate, so I have I think 10mm M2 screws…
This is a finial for Halloween fences made from PVC pipe . This particular model is a traditional Victorian finial design that I assume represents a Lily, much like a Fleur-de-lis. (Feel free to correct me if I'm wrong.) See below for…
An enclosure for the LILYGO Meshtastic T-Beam ESP32 TTGO Development Board with LCD and rear mounted 18650 battery mount. Requires four (4) 16mm M2 screws. OpenSCAD file requires BOSL2 (https://github.com/BelfrySCAD/BOSL2) and nutsnbolts…
This is a 3d print with a little bit of a crafty energy. To achive the natural shape of plants, whitch is not straight and more organic, I used a heatgun to bend the plant stems and the leafs. I recomend PLA for this procedure, because of…
For this first May, circumstances make it difficult to access LILY OF THE VALLEY. Amigagoma offers you a lily of the valley printed in 3 D To find on http://amigagoma.free.fr/?p=567 and the files…
Made by request. If you want to request a model just message me through Printables.
Simple earrings. Printed on an A1 mini. To add hole just add a negative cylinder, i set it to 2.3 mm
A belt clip for the T-Deck Plus (the version of the T-Deck that comes in a case). I primarily wanted a belt clip so I could put it on a bracket or stand. Print the belt clip on its side for maximum strength, supports are required. Print…
This is a remix of @Joshckb_190777 's excellent Lily58 case adapted to fit the Typeractive.xyz Lily58 Choc kit, which uses a more-compact switch spacing than the original Lily58 board. This only fits the Typeractive version of this board…
This replaces the bottom case of the Lily58 and Lily58 Pro to give 15 degrees of tenting. Uses the original standoffs and M2x5mm screws to secure the top plate to the case. Stick 5 6mm diameter adhesive rubber feet to the indents in each…
Here is a case for a Lilygo T-Display S3 (without header pins) Files include: .STL + Fusion 360 source (.fd3) + Prusa Slicer .3mf file case was made in support of this project: https://rlatour.com/cpumonitorjr/ Hope it will be of use to…
Lilygo T5 4.7 S3 E-paper (NO TOUCH) screen case with stand
Gingerbread cookie cutter with the Scout Lily stamp. The stamp is 2mm above the cutting edge so about 3-4mm thick dough works
Battery Backpack that clips onto a LilyGO T-Display-S3 Features Fits MakerFocus 1000mAh Lithium battery ( 42 x 25 x 11mm ) Change Log 2026-11-06 Added a base that holds the LiLyGO T-Display-S3 BattPack at an angle 2024-11-08 This latest…
A new 3D figurine generated by AI, a cute frog. Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
A long time ago, I decided to sculpt a frog relaxing on a lilypad to thank Michael Hackney ( https://www.sublimelayers.com/ ) for a very nice book on Patinas that he bought for me but I kept forgeting about it During that time, a number…
This is my recreation of the "Waterlily" portable wind and water generator. My current prototype has not been tested in the water yet, as I haven't quite figured out a decent way to waterproof the motor yet. With proper electronics, it…
Lily pads or Mouse Ears are circular features that are added in model perimeter locations that may be susceptible to warping, such as sharp angles or highly detailed surfaces. Lily pads are an excellent choice for models that do not need…
it is a sign with the flower and the name lily
A French Lily you can hang from the wall by the special hole in the back. If anyone has any questions please contact me, THop3D
Overview This is a simple enclosure for the LilyGo T3 S3 development board. The T3 S3 is fairly inexpensive and popular ESP32 board with an onboard LoRa transceiver. Printing There's not much to worry about printing this model. The .3mf…
Lily Fighter Gil Ready for 3d Printing.
Snap-fit case for TTGO T-Display
A LilyGo T-Embed CC1101 Body with dual SMA antenna holes. This is the stock body part and is not optimised for FDM., so it will require well-tuned support setting.
Lily58 Case with 7mm standoffs Print instructions 4 layers top 4 layers bottom 20% gyroid infill support as you wish
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a case for the LILYGO® T5 4.7 Inch E-paper V2.3 ESP32-S3 https://aliexpress.com/item/1005004647326743.html Features The E-Paper board will be held in place with the USB-C connector and a “tight” fit. The buttons are accessible…
A simple plug for the 4 pin connector on the left side of the LilyGo t-deck plus. Print in a soft (85A) TPU - easy print no supports or raft required Category: Mobile Phone
I was inspired by Coumbaya's Corne case to design this similar case for my Lily58. It acts like a bottom plate so you will need standoffs and a top plate to hold the whole thing together. I got my PCB and top plate from worldspawnkeebs on…
Belt/strap clip for the Lilygo T-Echo with improvements to securely attach device to straps or a belt. Bolt to device with M3x6 button head machine screws ( https://www.mcmaster.com/920 ). This version does not include the button guard. I…
I created this yarn spinner as a gift, I do not actually knit, so I will appreciate any feedback. I tried to create an aesthetically pleasing, yet functional model. There are few parts that need to fit together nicely, so I recommend…
This model is a revised and fixed version. The following modifications were made: 1) The height of the screen window hole has been adjusted. The screen is now fully visible. 2) The hole for the micro-USB cable has been widened. I tested…
simple case that fits a slim battery and some sensors you might want to have if you need to customize https://a360.co/4poeBnF (2026-01-03 fixed the link) Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes…
Here is a new slim basic case for the T-Beam 1watt with easy access to all the buttons. Designed for using a USB-C rechargeable F550 battery. This is a work in progress! I used tree support everywhere. Added a hexagon cutout to the front…
This model consists of three parts: case body, lid and lightguides. BOM The following items are needed for one case: 1x printed body 1 x printed lid 2x lightguides 2x M4x10 hexagon socket head cap screw(DIN 912) 1x SP11 Panel Mount…
a beautiful traditional scout emblem 3d model
Enclosure for LILYGO T-QT / T-QT Pro (ESP32-S3 DEV Board)
LED tealight holder in the shape of a Lily Flower Fits standard size (37 mm diameter) tealights , but you can customize the size as you wish. Tree supports are easy to remove. My print settings(PLA): 0,16mm layers / 2walls / 10%gyroid /…