Liczymy pasujące modele…
This is a remix of https://www.thingiverse.com/thing:1213459 My appologies to the original designer for not including the link to his model originally, as I was unable to locate the original when I posted. For use as a Center Finder;…
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
Hallo zusammen, hier mal wieder einige Optimierungen für meine 3D-Druckwerkstatt, die ich euch gerne zum Nachdruck übergeben möchte. Um die Druckqualität zu erhöhen, habe ich mir dann doch mal einen Drybox gebaut und verschiedene Entwürfe…
Wydruk około 2,59 €–3,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gas cylinder spanner for camping or barbecue gas cylinders with spanner for gas pressure reducer, 30mm, 18mm and 17mm. Dimensions: Width 168.17 mm Height 8.00 mm Depth 56.20 mm Print: PETG Filling: 100% Filling pattern: straight No…
Wydruk około 2,68 €–3,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Too lazy or cheap to buy a replacement gas cilinder for you Ikea Markus? Print this stopper to prevent the dreaded sag. Easy to print and in one piece for you to not waste your time. I printed in PETG to prevent warping with extensive…
Wydruk około 1,50 €–1,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Say hello to the Articulated Cylinder , a delightful combination of minimalist decor and playful charm! With its moveable legs and expressive arms,…
Wydruk około 0,91 €–1,12 € nettoWstępna wycena jednego wariantu
I wanted a desiccant holder that would fit inside a filament spool. I found a lot of models that used holes or vertical slots to allow air to pass through. I don't like printing posts as it takes longer to start and stop for each one. I…
Wydruk około 2,89 €–3,54 € nettoWstępna wycena jednego wariantu
Created this vase to display LEGO Flowers.
Wydruk około 10,34 €–12,64 € nettoWstępna wycena jednego wariantu
This model is a wall mount for the inside of any standard Ikea kitchen cabinet that is designed to hold two of any standard type of SodaStream CO2 cylinders. By using the wall mount the usually unhandy and clunky SodaStream CO2 cylinders…
Wydruk około 3,51 €–4,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted a desiccant holder that would fit inside a filament spool. I found a lot of models that used holes or vertical slots to allow air to pass through. I don't like printing posts as it takes longer to start and stop at for each one.…
Wydruk około 2,45 €–2,99 € nettoWstępna wycena jednego wariantu
Say hello to Mini Cylinder Buddy , the tiny 3D-printed friend of Mini Cube Buddy! 🏺✨ This adorable micro figure is perfect for decorating your desk, shelf, or workspace . ✅ Ultra-lightweight – weighs just 0.3 grams ✅ Super quick print –…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Does exactly what it says on the tin. Screw cap for scuba cylinder DIN valves to prevent dust and other crap getting into the valve. Has a hole on the outside for threading through a string and attaching to the cylinder. Edit 03/06/2025:…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
This nameplate is a gift for a friend. He has several old Volvo BM tractors. After I found a picture online of the logo. I cleaned it up and converted it to svg. ( with inkscape ) The imported it into freecad and extruded the logo. I had…
Wydruk około 5,08 €–6,21 € nettoWstępna wycena jednego wariantu
A blind cover for euro profile cylinder door handle face plates. I made this model for Hoppe short backplate Birmingham 1117/202KP/AP (11794926) handle sets for profile doors, so you might have to alter it a bit to make it work if your…
Wydruk około 0,13 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The two parts "0-tip" and parallel attachment can be placed on a folding rule and make it easy to measure the required lengths for a lock cylinder.
Wydruk około 1,69 €–2,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a replacement for the Babybay safety connection cylinder. Settings Value Infill 5% (adaptive cubic) Perimeters 2 Layer Height 0.2 mm Material PETG (PLA) Supporting Material none Comments printed on MK4 with MMU3 FW6.1.3 Ironing no…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
äußerer Durchmesser Ø50mm innerer Durchmesser Ø32mm Dicke = 5mm
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
My friend and I designed this after I painted my Macan calipers red to go on my mk7 GTI and had to basically avoid the area around the cylinders for fear of getting paint into them. They're designed around the width of electrical tape;…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
This model fixed my sinking office chair for good. Simply remove the clip on the very bottom of the chair holding the piston in place. The shaft/piston is easily removed from the chair legs/base. Slide the printed part on the shaft. Put…
Wydruk około 1,64 €–2,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
VidaXL awning cylinder holder 450cm The awning cylinder was sagging, rubbing against the mounting screw. The manufacturer does not sell the holder separately.
Wydruk około 7,13 €–8,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
(EN version follows) Ve škole máme sady tělísek o stejném objemu a o stejné hmotnosti od 3B Scientific, které používáme při výuce Archimedova zákona. Válečky o průměru 20 mm vyrobené z různých materiálů jsou v sadách o stejném objemu a…
Wydruk około 1,86 €–2,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cylinder r = 100 mm h= 100 mm Can be used as skirt with 0% infill, 0% top and bottom layers and 1 perimeter.
Fidget Fun That Never Runs Out of Spring! 3D Printed Slinky Spring Fidget Cylinder. Mesmerizing Coiling and Recoiling Action. Unique Custom Printed Design. Keep Those Hands And Minds Engaged! Please use 0.2mm layer height for the print,…
2.4 : 1 Scale Study Model of a Cylinder Lock I made this illustrative model of a keyed lock to help you understand the function of the door opening and closing mechanism. Video assembly instructions: I've always been fascinated by…
This Remix of the Twist Lock Present introduces a new hat box inspired cylinder shape. https://youtu.be/KVtVwutMq5E Sizes All boxes are have an internal diameter of 100mm. Short - 30mm tall Medium - 50mm tall Tall - 70mm tall Extra Tall -…
A simple test cylinder, good print to show how consistent or not your Z-axis is. the Base is 2mm thick so you can measure if your z-offset is correct. The cylinder is 100mm so you can measure for your Z-axis e-steps. Base is 40mm x 40mm…
Remix of Motor Fidget by Mars3D with more cylinders. The higher cylinder counts may require more play to get free and some lubrication.
[First, let me offer you something fantastic] I've released 22 fantastic customizer programs "Amazing STL Creator". Try them out. Create STLs that will amaze your friends. Right now is the best time to get all my programs. Get the entire…
Perfect Circle (round cylinder) How I Designed This Originally using Tinkercad following the instructions from this youtube video: https://www.youtube.com/watch?v=e7anvs9PZUI Later with Fusion 360
Like quite some other models these days, this model is inspired by “Fallout”. I wanted to make a storage container with that heavy/armored/SciFi vibe, this time with a firmly locking bayonet lock. It's bit spring loaded ('compliant' in…
Print with 0.2mm layers.
Just a cylinder for downloading and modifying.
Ever forget to close up your gas cylinders and then donate your bottle gas to the atmosphere? This project fits onto a 5-lobe Sherwood cylinder gas valve and provides an instant visual indicator if the valve is opened or closed: The…
20160601 cylinder center finder
A nice box in the shape of two cylinders twisted into each other. Ideal for packing small things. Also very suitable as a gift. I printed it with 0.3 layer height. No supports nessecary. This design is highly inspired by Defauld's Screw…
General The radial engine is a reciprocating type internal combustion engine configuration in which the cylinders "radiate" outward from a central crankcase like the spokes of a wheel. It resembles a stylized star when viewed from the…
Gas Cylinder Stash Keychain Little gas cylinder with seamless threaded lid. It won't look like there's any secrets in it. Universal slicer settings: Material: PLA Nozzle: 0.4mm Layer Height: 0.20mm No Supports
A spiraled cylinder plant pot with a twisted texture. Perfect for indoor plants like cacti and succulents. The planter can be printed in vase mode and in normal mode. I've included a shelled version for printing with multiple perimeters.…
Need a basic cube but don't feel like installing 3D software or firing it up to make one? Here you go. This is a small pack of 6 primitive shapes for whatever you may need them for. Whether it be test cubes, or stretching the cylinder…
A simple hollow cylinder model designed for general use. Ideal for testing printer calibration, creating spacers, sleeve
Designed to allow quick and easy storage solutions for use with the Multiboard system with the following design objectives: Parametric Box or cylindrincal Honeycomb pattern to match multiboard asthetic Use two peg board holes for…
This engine block model serves as a stylish keychain. 3D printed with attention to detail, it's perfect for car enthusiasts who want to add a technical touch to their keyring. A great accessory that's easy to print If you have an idea for…
4 Cylinder Engine Assembly & Drafting This model is designed as a practice project to enhance your 3D CAD skills. It's a detailed 4-cylinder engine assembly that tests your abilities in both modeling and drafting. The tolerances are not…
To build this - you will need one of each of these parts that are included (Choose one of the cylinders that is included) - along with a Bic Pencil spring (the ones that are hexagonal and look like this:) , and a toy screw or 4-40 x 3/8in…
Printing The cylinder head is very detailed and could cause problems on some printers. In that case please use the “simplified” version of the cylinder head. The Cylinder Head is printed with support. Beware of seams on axles and…
This model is compatible with the lego system.
Cylinder Mazes by 3DFabXYZ.com With 3 different Christmas themed Lids. Are you looking for an unusual gift idea? Or a unique toy for someone special? Do you like solving puzzles? For a truly multi-functional object, 3DFabXYZ is proud to…
This calibration object helps to assess the correctness of the motor calibrations. The external diameter of this object is 30 mm, and its height is 50 mm. Furthermore, the printed cylinder shall be perfectly round.
Attention : This print requires a very accurate printer, the tolerances are small ! You could scale it up, be then the springs should also be scaled up Instructions Required : Printed pieces : 1 x Cylinder 1 x Core → only piece that needs…
This engine block model serves as a stylish keychain. 3D printed with attention to detail, it's perfect for car enthusiasts who want to add a technical touch to their keyring. A great accessory that's easy to print If you have an idea for…
3 Cylinder Engine Block With Movable Pistons Easy Assembly: Snap-fit design requires no additional hardware.
Updates: 2026-10-07 Updated V2 for much easier priming. 2026-09-24 Added 3 V2 variants that print without support. 2026-07-05 Added a version with looser barrel fit. 2026-07-03 Added a version with looser clip; print this if you think the…
This Remix of the Twist Lock Present introduces a new hat box inspired cylinder shape. https://youtu.be/KVtVwutMq5E Sizes All boxes are have an internal diameter of 140mm. Short - 30mm tall Medium - 50mm tall Tall - 70mm tall Extra Tall -…
This is my Ambiguous Cylinder Generator to create Illusions based on the "Ambiguous Cylinder illusion" by Kokichi Sugihara. Use OpenSCAD to customize to your liking! Have fun and share a make if you print one! Changelog: v1.4: Presets for…
I couldn't find this online, so I made my own. It is a honeycomb-patterned cylinder for printing in vase mode - as a lamp shade. The fusion 360 file is parameterized, so you can easily change the size of the comb or of the vase with just…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Single-layer walls allow max light through. No supports needed. Easy to print. Fits any LED strip lighting. I developed this to hold most of a 5m strip of LEDs, cut off or tuck…
Hello together, Who doesn't know the struggle with CO2 cylinders lying somewhere around in a cabinet taking up a lot of space? Therefore i designed a small bracket to screw into the cabinet. Depends on the bracket you need, it can hold…
A radial engine is an internal combustion engine configuration in which the cylinders radiate outward from a central housing like the spokes of a wheel. It resembles a stylized star when viewed from the front, and is called a "star…
This cylindrical trick box has a hidden latch mechanism. This remix of the original Twist Lock Trick Box (hexagon) uses a round base and cap. Just like the original, this can be customized with different topper designs. Any topper created…
With this lego compatible frame you can build a three cylinder radial engine. You will have to modify the connecting rods in order for them to fit onto one single crankshaft piece. (make them narrower)
Original: I reworked the original to include a 3mm hole for a paracord to be added to the outside and a 2mm hole for venting in case someone opened the cylinder valve for safety. All in english: Full cap and Empty cap Tank dust caps for…
Ersatz-Zinke für den Bruder Linde Gabelstapler 1:16. Nachgezeichnet nach 2D Scan. An der Spitze der Zinke einseitig verjüngt. Für die andere Seite bitte gespiegelt ausdrucken. Verstärkt. Passt besser als das Original. Auf den Fotos sieht…
Today I am introducing the filament calibration cylinder. Calibrate your filament for more precise prints. This calibration test will allow you test and calibrate important settings such as flow compensation, cooling, and horizontal…
Dies ist ein Testdruck zum kalibrieren von der Horizontale Erweiterung. Der Zylinder ist 20 x 20 x 20 mm und die Bohrung hat den Durchmesser von 10 mm. Schichtdicke 0,2 mm, Linienbreite 0,45 mm. Viel Spaß
Includes a 3mm hole for a paracord to be added to the outside and a 2mm hole for venting in case someone opened the cylinder valve for safety. Remade the design by Lucianocunha ( https://www.thingiverse.com/thing:4552099 ) to work with…
Geometric Shapes - Ball, cube/parallelepipped, cylinder, cone e hexagonal prism Category: Math
Simple holder for the calibration cylinder that attaches to the v-slot and holds itself. Designed for Longer Ray 5 lasercutter. Might as well fit for others, depending on the size of the cylinder (in this case ~1,6cm in diameter) Prints…
Učebná pomôcka. Pre úsporu materiálu je 5% výplň.
Did this for my buddy's wife - easily holds a voucher or smaller odds and ends. I experimented with patterns here and I'm quite pleased with how the scales came out. Print one cylinder and two endcaps, that's it. Printed with 3 walls and…
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s Certainly! Here's a brief overview of the history of the 1910 Indian Single motorcycle: The…
The engine is designed to not require any additional fasteners but it still needs some non printed parts and some tools. The assembly guide can be found as a PDF in the files. I'd recommend printing the 3mf files as their are some parts…
Cylinder Tambour Box – a fully 3D-printable organizer with a unique mechanism where pulling the drawer opens the roll-top lid. 🚀 Size: 164 × 97 × 82 mm Fully 3D-printable – no additional parts needed Roll-top lid opens together with the…
Recommend using supports everywhere with type snug. Original: ikea.com/en/skadis-hook-white
Vortex Passthrough Spiral Illusion Toy SIZE LARGE - H110mm x 52mm Diameter SIZE SMALL - H67mm x 36mm Diameter - Print with standard settings and no support. - Maybe adjust speed towards the end layers so PLA can cool down for next layer -…
Building off of my earlier sliding valve air engine( https://www.thingiverse.com/thing:2492963 ), here is a 2 cylinder version. This design runs well, but it needs lots of air. Included in the files is a list of parts and hardware - See…
Drucker: Anycubic Kobra 2 Plus Material: Jayo PLA Weiß Düse: 0,2 mm Temperatur: Düse 215° Heizbett 60° Druckbetthaftung: Brim Wandlinien: 65 Füllung: 0% Lüfter: 70%
Turns from a cylinder to a square or turns from a square to a cylinder!
Make friends and intimidate them with stupid-silly firepower why not? I've seen a few designs here and there for inline clips and I finally put a couple hours into my spiraled cylinder to get half darts stacked and firing. In brief: the…
12 most common magnet size holes (flush and embedded) provided in Files. These voids are created by an OpenSCAD script that will create cylindrical holes to be used in creating a negative space in your model that fits a cylindrical magnet…
Adapt any cylinder to any strap on your backpack with this parametric design. Suggestions welcome! If you want me to include a custom size in the files, just let me know in the comments and I'll add it. What items do you want to attach to…
Based on a novelty sold by Think Geek. Looks like an oversized revolver cylinder but it is a pen holder. Instructions Print as you please, no support or anything special needed. Mine was printed .2mm with 10% infill. Category: Organization
This is a Remix of : https://www.thingiverse.com/thing:5345813 The original Model's Rotation Piece was to long and pushed on the front end of my Nerf Hammershot. I removed the pins that held the darts in to increase the power. Post…
Built a simple cylindrical container with a matching screw cap. Lets air in, doesn't let silica gel pellets out. Openings on the container are 1mm wide. Both the cap and base printed together on my machine take ~3.5hrs to complete.…
These archery blinders are designed for archers like me, who struggle with eye dominance or focusing on the target with both eyes open. There are two variants using the same shield. Each variant can be clipped onto a baseball cap that.…
With this custom 120° crankshaft you can build a straight 3 cylinder or a V6 engine with an even firing order. for a complete crankshaft you need 3 custom 120° crankshaft pieces and 3 regular crankshaft pieces which you can download…
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s Here's an overview of the Indian Motorcycle Double Cylinder 1913: The Indian Motorcycle…
REQUIRES 4 PRINTED BEARINGS THAT ARE NOT INCLUDED IN THE STL LIST BELOW PLEASE PRINT 4 HERRINGBONE PLANETARY GEAR BY PRUSA RESEARCH FOUND IN MK3S SAMPLE OBJECTS ON PRINTABLES (or included on the sd that came with prusa printers) Print…
This model is compatible with the lego system.
Simply the original cylinder, but modified to accept the 22x7 bearings from the stock MMU Spool rollers. Put Supports on Buildplate / Paint on support for the lower bearing space. And keep the original print instructions in mind.
From the Good old Days, My version of a Puch Maxi cylinder an cylinder head. Layer hight 0,2 mm
Gas cylinder in diffident sizes and scale meant for model railways or scale model dioramas. Category: Props
This model is compatible with the lego system.
Linden leaf with voronoi design. Can be used as a keychain, coaster under your cup, earrings or just as a home decoration. The leaf has a unique voronoi design similar to the drawing on living leaves. Suitable as an autumn or winter…
Lock Holder for Euro Cylinder locks - both for handheld- and vise-picking! Can be used with full-, half- and cut cylinders. There's room for the cam (on either sides) in the back. The lock stays in place with a snug friction fit. OpenSCAD…
Peaky Blinders - coaster Diameter : 100 mm 2 layers / 2 colors : First layer : white Second layer : black Dessous de verre Peaky Blinders Diamètre : 100 mm 2 couches / 1 couleurs : Première couche : blanc Deuxième couche : noir
This lock has a spring loaded wafer that locks the cylinder core in position until the key is inserted. The tailpiece slips onto the inside end of the core and can be held in place with a screw. The pilot hole is designed for a #8-32…
