1535 modeli
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Once my Y-Axis Upgrade ( https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade ) works great…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
"Linear advance" (also called "K parameter") controls how to compensate for the pressure difference between “slow” and “fast” extrusions. This value needs to be correct for clean high-speed prints and depends on the extruder model, nozzle…
Wydruk około 0,66 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a rack and pinion style linear actuator. Due to the inclusion of a worm gear drive, the rack will maintain its position without the requirement to "hold" the gears static with a motor. This requirement was necessary in the…
Wydruk około 3,04 €–3,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you are looking for an upgrade for the X-axis of the MK3, you will find under the most popular the " X-Axis Linear Rail Guide Upgrade " from " KalleKnall " and the " X-Axis revision with belt tensioner " from " Boogie ". But I wanted…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I recently upgraded an Ender 3v2 with linear rails on all axes. However, the X-Axis I purchased from Amazon ( https://www.amazon.co.uk/gp/product/B09M73XRBH ) secures the rail to the top of the X 2020 bar and not the front as a lot of…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
Hello 3D-Friends, this is a ready to print gcode for Prusa XL to calibrate the k-factor for pressure advance (linear advance) for PLA. It was created with Prusa Slicer 2.8.1 and this great site:…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
UPDATE: 4/12/2024 - CAD Model .ipt added UPDATE: 5/8/2023 - ver. 1.1 After some use of the linear stage I concluded that the front screw clip just doesn't work. It's too thin. Rather than redo the entire model I have uploaded a fix that…
Wydruk około 7,02 €–8,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
ERROR in V2 Code ! Sorry! This was fixed in V3 In a recent post, Prusa introduced the K Values in the G-code of the Filament Settings, and since i had trouble with Multicolored print having a nice bond between the edges of the colors, i…
Wydruk około 7,68 €–9,39 € nettoWstępna wycena jednego wariantu
// Here you can find my new project which also use parts from optical drive https://www.thingiverse.com/thing:5201443 This is upgrade of my previous version I posted here.I also added second actuator without external shaft.These models…
Wydruk około 2,09 €–2,56 € nettoWstępna wycena jednego wariantu
sehr schnell druckbarer Glücksbringer für Silvester / Very fast printable talisman / lucky charms for New Year's Eve
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
This is for a taller Z axis, 120mm, and to use HGH linear rails to eliminate movement on the spindle and spindle mount. to use this take off the current X carriage and take the Z carriage off as well, mount a 20mm HGH rail onto the…
Wydruk około 15,06 €–18,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello 3D-Friends, this is a ready to print gcode for Prusa MK3.5 & MK3.5s to calibrate the k-factor for pressure advance (linear advance). It was created with Prusa Slicer 2.8.1 and this site:…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Após algumas pesquisas decidi-me por fazer a minha própria peça. O ficheiro STL já tem a tolerância de 0,2 para ficar com o diâmetro interno de 8mm e externo de 15mm. Basta fazer o slicing com as definições a baixo e deve sair tal como a…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
This is a model of a medical linear accelerator based on the “Halcyon” Unit marketed by Varian Medical Systems (Palo Alto, California). Medical linear accelerators are large and highly sophisticated medical devices that emit focused beams…
Wydruk około 4,12 €–5,03 € nettoWstępna wycena jednego wariantu
I really wanted to use linear bearings for the X axis on the Sainsmart 3018 Pro CNC I had, but I didn't want to have to swap out the rest of the X axis as well. I made this to work with a 350mm MGN12 linear rail and MGN12H block. You can…
Wydruk około 7,68 €–9,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This simple part is a quick disconnect snap lock for attaching two tethered/tied lines together. Mount or tie one permanetly and enables a quick disconnect/reconnect for anything tied to the other side. Use to quickly tie down items in a…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Y-Axis Limiter / Stopper for dual MGN12H linear rails It is being sold under: “Upgrade Ender-3 V2 - Y Axis Dual MGN12H 300MM Linear Rail Kit Linear Mod ” Similar are to be found on aliexpress and others. After the chinese sellers: 2) For…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
Ensures your linear rails are mounted parallel to your 20XX extrusion. Prints < 8min & no extra hardware required! Add a comment if you want it to be adapted to any other linear rail or extrusion.
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
sehr schnell druckbarer Glücksbringer für Silvester / Very fast printable talisman / lucky charms for New Year's Eve
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
This two-part adapter allows a Somfy Smoove roller shutter switch to fit into a Busch-Jäger Future Linear frame. The mounting plate screws into the flush-mount box and provides the correct geometry to hold the Smoove securely. The…
Wydruk około 1,06 €–1,30 € nettoWstępna wycena jednego wariantu
A remix of the original HexScraper by @visle , featuring a redesigned rectilinear internal structure instead of the hex lattice. The external design and ergonomics remain unchanged, but this version offers a cleaner, industrial look and a…
Wydruk około 1,80 €–2,21 € nettoWstępna wycena jednego wariantu
This design is V-slot holder for 6mm linear rod similar to SK6 but optimized for 3D printing. You will need: 1x Vslot 20x20 (or bigger) 3x M3 inserts (external diameter 4mm, I've used 7mm depth, shorter should be fine) 2x M3 35mm 1x M3…
Wydruk około 1,34 €–1,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was replacing some of the linear bearings to polymer ones and had nothing to store the old ones, so threw together this little box with a sleeve.
Wydruk około 1,53 €–1,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This design allows for rigid and regulated connection between two 6mm linear rods. Inserts with screws holds linear rods rigid at place. You will need: 4x 12mm M3 screws 2x 6mm linear rods 4x M3 inserts (external diameter 4mm, I've used…
Wydruk około 0,92 €–1,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was looking for a simple Nozzle Size indicator for my printers and couldn't find any that I could place in a convenient location on the printers. This simple linear indicator that can be conveniently placed above the screens on both the…
Wydruk około 0,13 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I like this symmetric presentation of the figure eight know and I wrote some code to make Celtic knot.
Wydruk około 1,64 €–2,00 € nettoWstępna wycena jednego wariantu
Print straight up. Set 4 perimeters. No supports needed. Use 2 pieces of M3x10 imbus screws to fix it in position.
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
This stop serves both as an optical termination of the linear line profile and as a mechanical barrier against the carriage running off the track.
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
The levinson keyboard available here: https://keeb.io/products/nyquist-keyboard-pre-built Great alternative to the preonic. I made this case using OpenSCAD and then imported into FreeCAD to do filets. You can find the magnets on Amazon…
Wydruk około 3,60 €–4,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Among the regular maintenance tasks for a printer is the lubrication of its linear bearings. However, before applying new lubricant, the bearings should be thoroughly cleaned. This will remove old grease and any potential contaminants.…
Wydruk około 1,58 €–1,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Redesigned version damper foot to fit next to the Linear rail bracket. The original one been chopped up to fit in first so this is my version if you have linear rail upgrade too should be all good fit.
Wydruk około 2,79 €–3,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Used ScottW's filament guide as a base. After slight modifications it now can hold a LED lamp ( LEDVANCE ). Requires two M3x5.7 threaded inserts + two M3x8 screws (Prusa spares fit perfectly).
Wydruk około 1,61 €–1,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EN: To indicate limited rectilinear motion. DE: Zum anzeigen einer begrenzten geradlinigen Bewegung.
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Super Easy & Fast to Print Easter Egg decoration! 150mm Tall Check out rest of my Easter decorations here --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
Among the regular maintenance tasks for a printer is the lubrication of its linear bearings. However, before applying new lubricant, the bearings should be thoroughly cleaned. This will remove old grease and any potential contaminants.…
Wydruk około 2,48 €–3,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This object can be used to calibrate linearity correction factor for extruder motor. More info in https://help.prusa3d.com/en/article/extruder-linearity-correction-calibration_2254 Print instructions Print with PLA
**SPECIAL NOTE: I've installed this only on my printer, if your printer is different, let me know and I will see if I can find a way to help. Watch the video, if you're just looking for the install, skip to that part. Print from…
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Version 2 added and tested with fw 3.11.0 I want to have a stiffer and more robust Y-Axis Carriage on my Original Prusa MK3. The…
Here you will find really basic alignment tool for 2020 profile with the MGN9 & MGN12 linear rails. Proper alignment of linear rails especially on a 3d printer is VITAL to help give your 3d printer the best chance of both working &…
There are 2 versions: The regular, if you love simple things. The clip, more useful in vertical configuration, especially if you need it to stay fixed without holding it with your hands. Every stl contains both versions in order to limit…
This is my third Core XY conversion kit for the Ender 5 with Linear rails. Previous versions here, updates at the bottom of the page. MK2: https://www.thingiverse.com/thing:4777606 Mk1: https://www.thingiverse.com/thing:4650517 As per the…
I spent a day designing something around a flawed model of a linear bearing that I found online and I can't seem to find an actual source for linear bearing models that isn't in .CAD format, so I mocked these STLs up according to the…
Prusa supplies linear advance gcode for the MK series printers, but not for the Mini, so I decided to build one to help dial in a problem I've been having. The GCode is generated from Marlin's website found here:…
UPDATE 1/3/2023: This design will fail over time. The stress of the Z screws not being under the weight of the carriage makes the Z rails act as a pivot point and the plastic will wear down over time. I have been working on a complete…
This is a full Linear Rails mod for your Ender 5 s1 for the X and Y axis. This GREATLY improves rigidity and precision, and lowers the weight of the gantrys by 25% to 30%, which means greater quality at higher speeds. Also less unsprung…
This is a linear rail mod for the Ender 5 Plus. It encompasses the XY&Z axis. I designed these parts because I was unhappy with most other mod variations of them. Z Axis - The Z axis part were designed using the BLV MGN Cube as a starting…
Kingroon KP3S - Z axis Linear Rails: This is a upgrade for kingroon Z axis, with this upgrade you have a best result on Z axis and you can increase the Z-height of your printer to 225mm. In the attached documents you will find a pdf with…
Updates 20 November 2023, added a Sprite Extruder Mount . Linear Rod Upgrade I used CNCKitchen inserts and ProperPrinting's tool change system for this project. Information I've made a linear shaft upgrade for both the X-axis and Y-axis…
Small and simple actuator using a 28BYJ-48 stepper motor. Re-used an existing helical gear and rack design and created a new base and mounting boss + pin. Needed a quick and dirty solution so this actuator is created using basic shapes in…
"Relatively" simple mod for the Ender 3 V3 SE Before you continue please read over the BOM and make sure you have everything, especially the printed parts! And remember I am not liable to any damage to your printer, you are doing this at…
Prints as one part, some trimming of the raft will be needed but I've added clearances around the gears to reduce trimming needed there. The intent of this is to create a relatively low cost / low backlash linear actuator using the common…
This is the remeshed Prusa Bear style y-axis bearing holder for Prusa MK3s/+. This would allowed you to replace the Misumi Linear Bearing LMU8 without buying the new bearing clips. The only thing you have to change is the existing U-Bolts…
Linear Connector for 2020 Tslot Aluminium Profile M4 Thread Two models available: Standard - Heavy Duty Suitable for: Update 15/04/24 - Added Reinforced Type 15/07/2025 - Added REV1 versions - Geometry cleanup All our designs are free to…
All information to build the actuators can be found in the Bill of Materials. For (somewhat) detailed assembly instructions, see the last section of this video:
Small cap for quickly greasing LM8UU (8mm), LM10UU (10mm), or LM12UU (12mm) linear bearings. The cap is designed to attach to a 3oz tube of Super Lube Synthetic Grease* and fits inside the linear bearing. Line up the holes in the cap with…
So, this is my version of a Linear Rail Prusa Bear. Thank you to Grégoire Saunier for his fantastic work on the Prusa Bear, as this provided me with a fantastic starting off point. This will continue to be added with details, but the…
Linear Advance Live tuning test model Designed a model with a high and low speed area to tune the k-factor. Slice the model with a wall count of 3 lines and choose a line with of 0.6-0.7mm and a layer height 0.25-0.28mm for good…
Video showing assembly with hardware list in the description: https://www.youtube.com/watch?v=-C9e--3nvro
This Upgrade gives you the Ultimate 3018 CNC Machine - PCB's and Aluminium can now be milled accurately. Build Steps: Remove the old X-axis rods and Z-axis carriage Loosen the vertical X-axis mounts and slide them as far rear as they'll…
20mm x 40mm MGN12 Linear Rail Alignment Tool for the WorkHorse 3D Printer but this tool can be used for any 20mm x 40mm frame extrusion and MGN12 linear rail.
A remix of RepresentativeBlink mount for the Afterburner on an Ender 3 with an MGN12 rail, for StealthBurner also changed Added tie wrap holders to the top for cables Removed nuts that hold the two sections together and replaced them with…
Mechanical Movement 123 What is it? -This is a device that is designed to turn rotary motion into linear motion. It does this by having to drive gears engage with the rack at opposite times, in turn pulling the rack back and forth. The…
Snuff box with build in catapult. New Version with a dent, for a more easy lever movement (only visible on the renderings, not the real photos). I prited it in PLA with a 0.35mm nozzle, 0.20mm layer height and a honeycomb infill of 0,20.…
This linear actuator features an integral 3D printed ball screw for smooth, efficient operation. The ball screw and nut from my previous model are integrated into the moving actuator tube. It uses 28 6mm dia. airsoft BB's for bearing…
This is a bearing I designed specifically for one of my mods: QIDI X-Max - Improved X-Gantry With Tensioners It's similar in style to the commonly available IGUS bearings but I needed a slightly increased inner dimension (ID) to avoid…
DIY Handwired Split Mechanical Keyboard | The Ortholily This is my DIY mechanical keyboard design. It is split, handwired, ortholinear and 3D-printed. The layout is based on the Lily58 but ortholinear and capable of tenting. Some Notes:…
;tldr - Quick Start: Select the model (! Use Prusa Slicer 2.6.0 or newer ! ) - “Direct Drive” for the MK4 or “Bowden” for the Mini+., Additionally, you can select a layer height to test. Simply load the file in Prusa Slicer and slice the…
Voron 2.4 Linear rail cap with m3x8 screw
Replacement Linear Bearings for 8mm rods of Prusa printers Minimal friction surface Clean outside, no grooves or logos Print time: 39 minutes No support 0% infill The 3D Models found online where pretty low-poly and had other features I…
This optical data chip uses color swapping to achieve multi-color, done with a single extruder printer by automatically pausing at a layer, manually changing filament, and resuming. Check your slicer for this feature. Update log October…
Assembly Guide: This is an attachment for the SG90 Servo that allows it to function as a linear piston. It provides a force of approximately 5 N in both directions and can extend up to 45 mm from its initial position. Step-by-Step…
A smaller version of the original to try to keep the toolhead close to it's original position when using v slot wheels. You will need shorter M5 wafer screws than the original. V1 uses spacers compatible with Ben's mod, but I recommend V2…
A small bath to wash your linear rails in degreaser or isopropyl alcohol. You should always wash new linear rails to remove any anti-rust or dried grease on the rails. Fits 150mm MGN7 rails typically fitted to Voron 0.1 3D printers. You…
print all of the files. connect the gear to a servo horn.glue the motor to the box.
Caution: First off I am not responsible for any damage that may occur to your printer in attempting this mod. (not that this mod does any irreversible damage that can’t be fixed for under 5$) Secondly, this mod is for the base Ender 3 . I…
A quick and simple end cap for MGN9 Linear rails mounted on 2020 extrusion Can be Printed standing up or laying down on the face (supports from build plate recommended in this orientation) Mount with (1) M3x8mm SHCS and (1) M3 T-nut
Very simple to print. Use 2 M2 screws for servo mounting and 2 M3x10 screws for the rack
Print at 100% infill. You will want to install the stock bed carriage without the wheels on to these blocks. Keep all the bolts loose and then tighten them incrementally while sliding the bed fore and aft to ensure proper alignment and…
Linear guide rails and blocks are used to enable linear motion. The rails are mounted to your base, and the blocks are used to attach and move the component requiring linear movement. The rails are in length 40 mm, 60mm, 80mm, 100mm,…
To assemble it you will need a m5 threaded rod(any length you want) , two m5 nuts, 4 standard skateboard bearings, 4 m3x25mm screws with nuts. Just put the rails on the m5 threaded rod(there are nobs and holes you need to look out for),…
This mod fixes K1 Max quality issues, namely excessive ringing/echo. It also increases maximum accelerations. This mod changes print area depending on options you select, beware. I'll only upload cad assembly here (too many files to…
Check out the detailed guide over at 3dprintbeginner.com! Edit 2021-04-14: Drill guides updated to allow improved clamping. Just thread an M3 or M4 screw through two or three of the roller wheel holes to fasten the jig securely against…
This is a general purpose linear servo actuator (pusher style). Two sizes have been designed, for different space constraints and force outputs. These use continuous rotation servos which helps keep the cost very low. Off the shelf…
hi! I've build one because, it's impossible to find one who works correctly. The firmware is in french, V2 probe and for A4988 or TMC2208 steppers drivers. Just invert the steppers rotation for A4988 drivers. the z probe offset is easier…
The VOID40 is a 3d printed, handwired, 40% ortholinear keyboard running QMK Firmware on a Pro Micro controller. The case is designed to fit the bed of a stock Ender 3 when the parts are rotated 45 degrees and the skirt/brim is disabled in…
I designed this originally to work with the Modder Board. I have added the bracket for stock board users. Please let me know of any clearance issues. NOTE - You will need to download a model to push out the X endstop. I will work on a…
Just remodeled the Voron Trident Z Carriages to fit MGN12H Rails, as i'm reusing some old parts for my build. Please NOTE THAT, Positions are all the same, nothing changes. As MGN12H Carriages are wider than your extrusion, you should use…
Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4976173 . The Tronxy X5SA is a very cheap printer with some pretty serious problems. The factory belt path is far from ideal, the motor and pully mounts are…
I modified this for use with Tetrix pieces. This design has become my most popular and I want to credit it's original designer. See the remixed design Print Settings Printer: Qidi tech Rafts: Doesn't Matter Supports: Yes Resolution:…
Linear Rail. Y Linear Rail Mod V2. Bobblejot Website Bobblejot GitHub Bobblejot Twitter Bobblejot Patreon Update 070419 Added Y_Idler_NI.stl & Y_Motor_Mount_Back_NI.stl , The only change being the removal of the holes for the brass…
This linear slide could be used for positioning optical elements or the like. The 6" linear rail sections can be mounted end-to-end to create any length rail system. The rails mount with #6 screws on 2" centers, and there are various #6…
This is a remix of the linear rail X-Axis conversion kit by SnakeP on thingiverse . It's different in 4 ways: a bit easier to install (comes in two parts - no worries, it's still incredibly strong) the top can hold any upgrade the user…
3030 Linear Connector for Tslot Aluminium Profile M4 Thread Two versions: Standard Type Reinforced Type Suitable for: ***Warning: Dimensional Tolerance Notice*** This connector is designed for our standard profile specifications and may…
After producing quite a mess while trying to grease my bearings, I quickly designed this injector for LM8xx and LM10xx bearings which fits on the original SKF grease tubes. Just slide it in carfully, press and rotate the bearing - done…
As those that can be found on the net Print Settings Printer: JGAurora a5 Rafts: No Supports: No Resolution: 0.1 Infill: 20% Filament: Generic PLA Category: 3D Printer Parts
My mini LineArray. You see this also in my Truss system here: https://www.printables.com/de/model/451513-truss-system I also made a little Amp that fits for the little Bluetooth Amp. Nothing special but worked for me I used this little…
Linear actuator used for Adafruit's Xenomorph Halloween candy bucket project. https://learn.adafruit.com/xenomorph-halloween-candy-bucket Remixed from potentprintables original Linear Servo Actuators:…
Herringbone Gear Rack Pinion Linear Rail Guide and it works quite well! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 Infill: 15% Filament: Prusament PLA black How I Designed This…
To use this model u might have to get a slightly longer belt since the stock ender 3 belt might be a bit to short. I recommend a high quality Gates Belt. The carriage is a bit thicker than normal so you can use the hartk pcb without…
The Prusa mini K Factor / Linear Advance is well calibrated for stock. If you have changed your extruder / hotend you might need to calibrate the Linear Advance. This fixes issues where it is blobbing like over extrusion on edges yet when…
