871 modeli
Use brim for the locker. A fun miniature school locker that works as both a decorative display piece and a small storage organizer. Standing 240 mm tall, the locker features two internal shelves that divide the interior into three storage…
Wydruk około 3,28 €–4,00 € nettoWstępna wycena jednego wariantu
My son needed a small shelf for the inside of his school locker. We designed this magnetic, adjustable shelf to fit his iPhone, and a few other little items. The design uses ten (10) 4mm x 8mm neodymium magnets embedded into the object…
Wydruk około 6,85 €–8,37 € nettoWstępna wycena jednego wariantu
Prevents ventilation to close during printing or by accident. use PETG 0.2mm layer
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just get my printfile and print 5 in 20 min for 13ct. Its a fun gadget to have and guarantees laughter
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
So I broke original and make this better case for this chip
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Breakfast Club : Locker Magnet : John Bender. takes a 10mm by 3mm magnet. I may make a series. This would be the Criminal. I think the others are the athele, the princes, the basket case, and the nerd. ill see if there are any stand out…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
A “copy” of a broken original Fiskars part. Could have been made better but it works.
Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed this to block the white led that indicates sleep on the Koorui Monitors. I find this uncomftorble to sleep. These just slot over the existing light. Print in very fine resolution (0,1). The model is very fast, so you are done…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Physical LED blocker for the Ring Indoor Cam (2nd Gen). https://www.amazon.co.uk/dp/B0B6GKH3C2 The blue LED cannot be disabled in software or settings, so it remains to physically block the LED. This ring (if you pardon the pun) simply…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Replacing Part for your shower cabin.. It holds the side glass in place preventing it from slide.
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Size approximately 90 x 400 x 5 mm (EU 38-40) Use sock_blockers_straight-part_1.stl and sock_blockers_straight-part_2.stl if you can't print in one piece.
Wydruk około 6,72 €–8,21 € nettoWstępna wycena jednego wariantu
This design is a 4 piece print that allows you to sandwich heavy duty foil in-between the inner and outer layers which effectively creates a faraday cage and blocks the tracking signal being sent out. If you ever have a reason to “go off…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
This is used in cases where we need to cover the SD card slot and deter users from using their own SD cards. The shorter back piece can be inserted first, then the second longer piece can follow. There is a zip tie hold to keep both…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
Used to pull set / hardened caulk from a used nozzle. Simply remove the nozzle from the tube, wind the unblocker tool in and pull out the old caulk. Used to restart a tube with nozzle that hasn't been used in some time. Printed with 0.2mm…
Caulking Gun Nozzle Unblocker - without support
The Sock Blocker V2 has a replaceable tip for adjusting the size. It is an improved version of my original Sock Blocker with better guiding rails and a tighter fit. The two versions are NOT compatible. The tip is attached by a snapping…
Spring is in the air, so its time to plant some seeds and grow some veggies! Soils blocks are an excellent way to sow seeds indoors or in the greenhouse to prepare for planting outside. You don't need a lot of plastic pots, can quickly…
Maturity Good 2 prototypes. In use since 2023/10. Differences to the original I made the handle thicker to be the size of the helix. Then there is no need of support for the handle. I added some select infill for a stronger part. The…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Note: I created the Sock Blocker V2 , an improved version of this model. If you have not printed any parts yet, I suggest to start with the newer model. The two versions are NOT compatible. The Sock Blocker has a replaceable tip for…
Caulking Gun Nozzle Unblocker / Nettoyeur canule cartouche silicone
created a print-in-place trigger locker for my dyson because its very annoying to push the trigger the whole time. Tested it with the v8 and v15 but should work with others too. Tried PLA and PETG. Both worked fine. No Support needed.
I designed this model for keeping the door closed or opened. It is a side mount, so it can be mounted at the edge of the door and front of the profile, or on the side of the door profile and back of the door.
Design Concept The S-shaped hooks are designed for optimal strength and simplicity, seamlessly combining function with a sleek look ideal for locker use. Purpose These hooks address the problem of organization and space-saving within…
This model is compatible with the lego system.
parts required 2 x M3 socket screws (15 to 35mm long) 2 x M3 washers OnGlass Mk3 is a compact articulated lens hood, designed to block out reflections when taking pictures through glass. It also allow the camera lens to be tilted up to…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
This model is designed for 320mm or larger printers. It can be printed at a smaller size, but you may need to drill out the screw holes if they're too small. When printed at 100%, the two main sections can be assembled using 4 x brass…
Block your filament spool of the spool holder.Also suitable for other devices with a 30mm spool shaft.I recommend printing it in abs or petg.
Litter Locker replacement cartridge that's easier to refill and hold 3rd party bags. Onshape Design:…
this is a sock blocker, it blocks socks Print instructions Unassociated tags: sock blocker Category: Tools Summary this is a sock blocker, it blocks socks
Summary This is a 1:24 scale model of lockers in a kit card style. Versions The kit card is available in a 3MF file for a one-color print. The individual lockers are available as separate files. Print Print with 0.16 layer hight or lower…
I designed a copy of this famous bottle puzzle. I don't know the original creator of this puzzle but lot of brands are selling it made of wood. Very fun for challenging your thirsty friends ! Printing instructions : - Print all the parts…
For good looking graphic I printed it with a 0.25m nozzle
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Be nice, this is my first model! This adjustable shelf is designed to fit any personal locker, with a width ranging from 8.5" to 15" wide, 8" deep, and legs that make it 10" tall. Two 12x3mm magnets are inserted in each of the top halves…
I found that when using the thrustmaster th8a shifter on cars with less than 7 gears, i would sometimes accidentally put it in a gear that didn't exist. These gear blocker/fillers eliminate that issue when you are driving a car with 4, 5…
I used these to block the glare from the rear license plate lights. It shoots up a bright glare especially at night making it impossible to see. Use 3M waterproof tape, tape it to the back then add these to your rear bumper on the top…
This is the overhead locker from Borderlands 4! Use it to store all of your epic loot. The model features a spring assisted opening mechanism and holders for a hammer, craft knife, and tape measure. For assembly instructions, please watch…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
I can only say the best about this DIN rail clip, which I downloaded a couple of days ago: https://www.prusaprinters.org/prints/64242-din-rail-clip The only thing that I was missing, was a good way to unlock these clips. It is possible…
Originally, I wanted a 3d locker for the board game Lobotomy, to replace the flat tokens that indicate a search action is available. Then I thought it would be cool if you could open the locker to indicate it was already searched, which…
UPDATE:03.12.2022 Added a version for people with wider faces as some still experienced to much pressure from the blocker on their heads temple area.…
Rear Diff Locker to suit Tamiya TT02 if you want to use to drifting. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.1 Infill: 90 Filament: Generic PLA Post-Printing Instructions…
This makes for a way simpler setup for printing and if for some reason(like layer orientation), you still want to print on its side, you can. (Cover photo provided by @Notorial's make)
I printed quick in some old PETG at 0.20mm layers. I have addition Tmat items in my store , which I'm just using to offset material cost for prototypes. Thanks for looking!
Chastity V3 - update 2.7.2025 - širší stěny modelu This is a version for a long padlock key. Print instructions The "Locker" (basically furniture locks) are used in recent chastity devices both the cheap metal ones found on places like…
For best fit you can resize it to take it two two times longer, but orginal size is ok too.
What can I say? Glue the two pieces together with glue and install!
3D Printed tools for making soil blocks . Files and Configurations: Each soil blocker configuration is designed in two parts: the block tray, which holds the soil, and the stamp tray which compresses the soil to form the blocks. Currently…
Multifunction blocker Here is a very practical multifunction blocker. You can hang your brooms or shovels or any other things you want there. It can also be used as a door stopper to avoid damaging the walls as well as a door stopper if…
COLLAPSABLE LIGHTSABER WITH BELT CLIP AND BLADE LOCKER After I printed a collapsable lightsaber from 3DPRINTINGWORLD for my son, I decided to design my own. I've added a belt clip mechanism that also prevents the blades to unfold. I've…
The Core One has a crevice underneath the side panels where debris can collect. I created a wedge that fills this gap to prevent that. Included is a wedge with no magnet cutouts and a few variations for common magnet sizes. If you use the…
These are two simple tools to help you unlock a Betteri BC01 connector. The first is used to unlock a connector to connector connection. The second is used to unlock the latches to disassemble the connector. These can be printed without…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Box compartment lock for meiho 7070 7080 and compatibles.
A simple model that can become a multi-color print on any 3D printer by executing filament hot swaps mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and then…
The Thule Easy Fold Bike racks give easy access to the trunk of several cars but not such as i.e. VW Transporter. The tilt angle is to small to open the trunk lid. so i designed some new angle blockers with a new tilt angle of 90 degrees.…
Windows at my place do not have this nice feature of remaining locked half open. I have therefore designed this particular item which does the trick. Printing a bunch of these was way cheaper than having all the windows replaced (and…
The model is designed to secure cabinet doors and drawers against unwanted manipulation by small children. The lock can be installed using double-sided adhesive tape without damaging the furniture. The lock pins need to be glued with…
We have switches / PLC's at work that occasionally get relocated. Every now and then, the wrong un-configured ports get used to re-connect these devices. These aren't really to stop people from pulling them out if they wanted to with some…
The individual parts can then be connected with appropriate glue (super glue, duck tape) and the tips of the sock blocker V2 Mr. Cookie can be attached. printer instructions as described there.
Simple mechanism to lock the cabinet so kids under 3 years won't be able to unlock it. Lock provided in 2 sizes Medium and Large.
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and…
I wanted a structure to slow down or block the large birds such as crows from eating most of the bird seed in my Bird Buddy. I found this “large bird deterrent” on Etsy but the shop is temporarily closed. My son created a parameterized…
A NAS and a switch tend to illuminate my bedroom due to unfortunate (but unchangeable) placement. I made a very slim RJ45 LED plug cover, which slides on easily and does not come off on its own when unplugging cables. Works also with…
I've designed this very simple tool to keep the door wide open while doing maintenance of the printer. Printing tips : Layer height: 0.2mm Wall loops : 3 Bottom and top shell layers: 5 Sparse infill density : 15% no support needed…
A thing to block all those silly keys that no one uses (like caps lock). Has a hole in the bottom for an M2 heat-set insert, which can be used with an M2x4 or M2x6 screw and M2 washer to hold the switch blocker in place.
Remixed sock blocker with extra starbursts (or whatever they are) of different sizes for looks and faster drying. The original author put it best: > this is a sock blocker, it blocks socks But, you know, holier.
Not pretty, but they serve their purpose.
Update: Added v2 version with thicker design for easier printing Ikea Skadis container use to slide out from its rail. It's very annoying, but this model should help. The model has two parts: first — main part which is glued to the…
There are some great soil blocker designs out there, but I had a need to fill a bunch of 1020 trays and I knew I could fit the footprint on the Prusa Mk3. The blocks are approximately 38mm square and fill the tray in a 6 by 12 pattern.…
DEMON LSAYER FANDOM: Add some Demon Slayer flair to your refrigerator or any metal surface with this Tanjiro Kamado magnet. Category: 2D Art
This articulated lens hood blocks out reflection, when taking pictures through glass. Great for observation deck and aquariums. It allows the lens to tilt ±46º in any direction. The hood has an an angle of view of 28º and an aperture of…
I printed the original sock blocker for a friend but came to the conclusion that the tolerances were too tight for my printer. I, therefore, increased the tolerances a bit. Someone contacted me to share the adjusted file, so here it is! :)
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and…
-Work in progress- My dog keeps losing her balls under the couch and whining for them. designed these to prevent that from happening. going to see if i need to increase the thickness. not sure if my dog will paw at it or not. Note that…
English: Should fit every locker. If not, you can easily adjust the hook with the f3d file. Deutsch: Sollte bei jeden Spind passen. Wenn nicht kannst du den Hacken mit der f3d Datei leicht anpassen.
small print that block your hinge to open to 75°,70,65 angle
Three soil block makers with changeable dimple makers (screwable) Dimensions of the blocks: 35 x 35 x 35 mm 25 x 25 x 30mm 35 mm round / 35mm high (fits the common growing boxes) Because i had some adhesion problems, i added a version…
Magnetic NFC tag holder, ala "Brick" ( https://getbrick.com/ ). I love the concept of Brick , but didn't want to spend $80 just to try it. How to Print The included .3mf file has the pauses built in (I used Bambu Studio), however if you…
Thanks to Valve, we now have the exact CAD for the extended light blocker found in the Ergonomic Accessories Kit! I printed this with Amazon Basics TPU at 100% infill and used tree supports. The supports can be hard to remove. I recommend…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A simple thread blocker, that is placed in front of the spool, so that it does not fall off the machine.
Create your own hockey locker room name plate. For a better look, print with 2 colors, a dark color for the first couple of layers, and white for the rest. Use the Customizer option (thingiverse) to personalize the player name and number.…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
The MMS/Picatinny Locking Lever! Flip the lever on the side to release your MMS Module or Picatinny Rail product! THIS IS A PROTOTYPE. IT MAY OR MAY NOT WORK FOR YOU. Instead of pushing a pin in and out, you can flip a lever really quick…
DEMON SLAYER FANDOM: Add some Demon Slayer flair to your refrigerator or any metal surface with this Inosuke Hashibira magnet. Category: 2D Art
This is a remix of the LitterLocker Refill Holder by Markus Seidl I've added 4 holes to the main holder and 4 latches to the top part to fixate it and stop it from moving when pulling the bags. I'm no expert in CAD, but it did work for me…
Switch blockers for encoder shafts and for covering up unused key slots in your layout. Your milage may vary depending on your switch plate though when it comes to the fit and tolerances for both the switch blockers and encoder blockers.…
DEMON LSAYER FANDOM: Add some Demon Slayer flair to your refrigerator or any metal surface with this Zenitsu Agatsuma magnet. Category: 2D Art
After constantly getting cat toys under my couch, I decided to make my own under-couch blocking system that looks decent. Due to some couch sag, I printed mine with some small supports that keep the system in place where the pieces don't…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
A tool for completely blocking the Floyd Rose 1000 bridge of my LTD KH-602 electric guitar from moving both forward and backward, effectively hard-tailing it. I've included two different sizes as indicated in the photos due to the surface…
A tool for completely blocking the Floyd Rose 1500 bridge of my Schecter C-1 FR SLS Elite electric guitar from moving both forward and backward, effectively hard-tailing it. Included also is a 3mm hole to assist in pulling the blocker out…
I made this blocker for the driver sensor since it keeps annoying me and not functioning properly. The goal was also to make it easily attachable and removable. It requires the steeringwheel to be pulled out a bit since the sensor will…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
