Wyniki wyszukiwania: loctite

Sortowanie

115 modeli

P
PrintablesLiquidPizza

HSW - Loctite Super Glue Shelf

Perfectly holds your Loctite Superglue (or other things). Available in 2, 4, and 6 pack. Printed with: PLA+ 35% Infill No Supports Cheers, big ears!

Pobrania
707
Polubienia
139
Ocena
4,93
P
PrintablesBen

Cross Threading is just Free Loctite! Sign

Inspired by our android leader over at VoidStar Labs and his overwhelming love for this phrase, I threw together a sign to constantly remind us of this neat cost saving tip!

Pobrania
269
Polubienia
109
Ocena
4,6
P
Printableschakkuchan

Gridfinity Gorilla and 2x Loctite Superglue holder

I printed with .4mm nozzle with .2layer heights. I like tight tolerances and modeled accordingly so that the glue bottles won't fall out easily.

Pobrania
221
Polubienia
35
Ocena
5
P
PrintablesMike Foged

Honeycomb Wall LocTite Super Glue holder

This is a remix, made it to fit Honeycomb wall

Pobrania
206
Polubienia
27
Ocena
5
P
PrintablesL'Atelier D²

Skadis Loctite Holder

Holder for 50mL Loctite Threadlocker For one or two bottle 62x30.5mm round

Pobrania
203
Polubienia
32
Ocena
5
P
PrintablesDiego E.

Loctite Bottle Holder Honeycomb Storage Wall

I designed a holder for two bottles of loctite for the honeycomb storage wall. I used: 1x Dual Insert M3 from RostaPs Honeycomb Storage wall 2x M3 Nuts 2x DIN 7991 Screws with L=8mm (i guess 10-12mm also works)

Pobrania
200
Polubienia
44
Ocena
5
P
PrintablesAlex Pinson

Loctite Mixing Nozzle (Bayonet Type)

The Loctite branded nozzles for their dispensing guns are too large and wasteful if you only need a small amount of epoxy. I was wasting over 10x the amount I needed to dispense since the nozzles are one time use. This nozzle has a finer…

Pobrania
194
Polubienia
11
Ocena
0
P
Printablescmh

Loctite small bottle holder for pegboard

Saw the loctite bottle holder and thought it was perfect - except it came with provision for magnets to attach it to a tool box. I have pegboard, so I cut out the holes for the magnets and mixed in the 2 position pegboard blank. Had a bit…

Pobrania
188
Polubienia
38
Ocena
5
P
Printablesjh247247

Gridfinity loctite 50ml holder

Holds a 50ml loctite bottle on its side in a 1x4 gridfinity bin. Designed to fit with a standard gridfinity baseplate in a toolbox. You'll have to write the type on the side or otherwise label them to know which is which

Pobrania
181
Polubienia
20
Ocena
0
P
PrintablesJake Poznanski

Loctite Silicone Sealer Applicator Tip

This is an applicator tip that you can use with 3M's Loctite Silicone Sealer tubes. I was using it as a replacement for the included tip, and to get a nice small bead for some crafts projects. You can increase the bead size by cutting off…

Pobrania
180
Polubienia
18
Ocena
4
P
PrintablesMicah

Gridfinity - Loctite 401 20ml + Fusion360 File

Gridfinity Loctite 401 20ml Holder 1x2 Holder for loctite 401 Fusion360 File included to mix sizes to your own requirements. Other models Check out my other models https://www.printables.com/@Micah_754861 Category: Organization

Pobrania
177
Polubienia
15
Ocena
5
P

Gridfinity Loctite SuperGlue Precision

This part fits the Gridfinity system Gridfinity base sizes: 1x1x0,5

Pobrania
161
Polubienia
20
Ocena
4,75
P
PrintablesPranks

Skadis Loctite Super Glue Precision-shelf

Small shelf for a Loctite Super Glue Precision-bottle. Intentionally a pretty snug fit and prints with support. Update(2024-08-08): Made it a little bit less snug per user feedback! :)

Pobrania
151
Polubienia
22
Ocena
4,57
P
PrintablesSeth Overbeek

Gridfinity One, Two, and Three Loctite 34oz

One, two, and three 34oz Loctite bottle holder. I cleaned up file a little bit. I was very new to CAD when first drawn. It is 4 mm taller. I also still included the model with the lip. Please post your makes and let me know how it worked…

Pobrania
127
Polubienia
15
Ocena
5
P
PrintablesHiyoriC3

Skadis loctite small bottle holder

Info for loctite threadlocker small bottle (10ml) use with CSD_Salzburg's “Skadis_Universal_Hook” Files CAD file (.SLDPRT) is provided if you want to custom it. Print instructions Filament material: Any type should be ok Layer Height:…

Pobrania
119
Polubienia
12
Ocena
5
P
PrintablesDmitri K

HSW 2 x Loctite Super Glue holder (Direct Mount)

I’ve created a Loctite Super Glue holder for HSW. This design is different because it can be directly attached to your Honeycomb Storage Wall. I prefer designs that don’t require extra parts for mounting. If you print this design with the…

Pobrania
119
Polubienia
22
Ocena
5
P
PrintablesThtunew

2X Loctite Bottle Holder Magnetic Mount

Magnetic Loctite 50ml bottle holder for 2 bottles. Designed to use 1/2 diameter x 1/4 deep magnets

Pobrania
118
Polubienia
8
Ocena
0
P

Loctite Support

This is a support I made in order to prevent your instant adhesive to turn unusable when kept flat inside of a drawer. Instead, you just keep it in place on this support and it will keep the adhesive away from the cap, preventing it from…

Pobrania
118
Polubienia
37
Ocena
0
P
PrintablesNolan Garmon

Loctite Super Glue Holder Multiboard Push-Fit

Loctite Super Glue Holder Multiboard Push-Fit

Pobrania
118
Polubienia
16
Ocena
5
P
Printablespointt

Loctite Glue Holder for IKEA Skadis

I created this Glue Holder because I couldn't find a suitable model. So, I designed one myself. It can perfectly fit two together.

Pobrania
118
Polubienia
17
Ocena
5
P
Printablescmh

Pegboard holder for single bottle of LocTite

Single bottle version of my quad LocTite bottle holder for pegboard, thanks to @Marlin for the suggestion! Different mount on the back which works well with my 1/8" MDF pegboard. Should work with others. Designed to be a tight fit in ¼"…

Pobrania
97
Polubienia
27
Ocena
5
P
Printablesjwingenroth

Loctite SEMPAK cartridge plunger for 3M DMA 50 dispenser

This is a plunger for the 3M DMA 50 dispenser. This dispenser is made for the 3M 2 part adhesive Duo-Pak cartridge. With this plunger, the 3M dispenser can dispense Loctite 50mL (50g:9g) SEMPAK cartridges. I printed in PETG, 0.4mm nozzle,…

Pobrania
96
Polubienia
3
Ocena
0
P
Printablesaesthe

Gridfinity Gorilla Glue Clear, 2x Loctite superglue, + gluestick/accelerant

I spun up a quick model to colocate my favorite glues: Gorilla Glue Clear (my new favorite general purpose) Loctite gel superglue Loctite liquid superglue (Glue stick, accelerant, or what have you). The focus was the first two items, but…

Pobrania
86
Polubienia
13
Ocena
5
P
PrintablesCharlie W

Loctite Threadlocker Blue/Red Cap for 50mL and 250mL Bottles

I lost the cap to my loctite bottle. This is an exact duplicate of the original cap. I printed out of PLA+ and with 3 walls, 100% infill but its mostly all walls anyways as its thin.

Pobrania
84
Polubienia
5
Ocena
0
P
PrintablesChrisn

Loctite stand

Stand for 10ml and 50ml loctite or other brand threadlockers

Pobrania
83
Polubienia
9
Ocena
0
P
PrintablesSquirrelbrain

Tamiya/Loctite Stand

A stand to hold Tamiya 40ml cement and loctite 20g glues.

Pobrania
72
Polubienia
14
Ocena
1
P
PrintablesJace

Gridfinity 1x2 f/ 50ml Loctite Bottle

I'm organizing my workplace, and I couldn't find a Gridfinity holder for 50ml bottles of Loctite, so I made my own! The base accepts magnets if wanted, and as most gridfinity bins; it prints well in almost any filament on any printer!…

Pobrania
71
Polubienia
11
Ocena
5
P
PrintablesNightView

Super Glue Holder – Loctite CA Glue Stand – Anti-Tip No-Spill Design for Honeycomb Wall Storage system

Simple and effective holder designed to keep Loctite super glue bottles stable and upright on the Honeycomb Wall Storage system. Prevents tipping, reduces spills, and keeps your glue ready to use. 🔧 Features: Anti-tip design for stability…

Pobrania
71
Polubienia
14
Ocena
5
P
Printablesrafaelrabaco

HSW Loctite SuperBonder 20g

Holds a 20g Loctite SuperBonder on a HSW

Pobrania
69
Polubienia
12
Ocena
5
P
PrintablesLev 3DD

Loctite Super Glue Organizer

Organizer for gel/liquid Loctite super glue.

Pobrania
68
Polubienia
5
Ocena
0
P
PrintablesWrenchWorks3D

LOCTITE GEL SUPER GLUE HSW

HSW for Loctite Gel Control super glue.

Pobrania
66
Polubienia
7
Ocena
5
P
PrintablesPablo1987xxx

Loctite 243 HSW Honeycomb

Wiszący pojemnik na klej Loctite 243, montowany na ścianie.

Pobrania
59
Polubienia
5
Ocena
0
P
PrintablesKudeiro

Loctite trapezoidal 20g mount for HSW

This is a mount for 2x 20g Superglue Loctite

Pobrania
58
Polubienia
11
Ocena
0
P
PrintablesTHALF

Gridfinity Loctite SuperGlue (with magnets)

Added magnets - and adjusted the size to the original Gridfinity size (41.5 x 41.5)

Pobrania
57
Polubienia
9
Ocena
0
P
PrintablesCAD-Guy

Stand for 10ml Loctite

I have designed this stand for the 10ml Loctite (406) can´s in my fridge. The file has 4 holes for M10 nuts in it, you can add a stop code and put them in. (in the *.gcode allready included). The nut´s sholud give the stande a higher…

Pobrania
54
Polubienia
12
Ocena
5
P
PrintablesJim Nangano

Multiboard Loctite bottle holder.

Print with PLA with supports for the multiboard plug. Choice of single or double bottle.

Pobrania
50
Polubienia
4
Ocena
5
P
PrintablesPablo1987xxx

Loctite 243 HSW Honeycomb

Loctite 243 HSW Honeycomb

Pobrania
45
Polubienia
1
Ocena
0
P
Printablesitsxris

Superglue (Loctite) Holder - Gridfinity

Gridfinity holder for x2 superglue tubes (0.14 fl oz). I have noticed some size variance within the tubes themselves, some may fit more snuggly than others. Link to the item: https://amzn.to/41Qxas6 Links provided may be affiliate links…

Pobrania
45
Polubienia
9
Ocena
0
P
PrintablesPrintedd

Dual Loctite 5g holder

I saw a lot of holders for different Loctites, but not for the 5g i used, so i made one :)I saw a lot of holders for different Loctites, but not for the 5g i used, so i made one :)

Pobrania
44
Polubienia
12
Ocena
0
P
PrintablesLacemaker

Gridfinity unit for .18 oz. Loctite

A remix of Blakadder's Loctite Precision Max Gridfinity bin to accommodate the .18 oz. Loctite bottle.

Pobrania
44
Polubienia
3
Ocena
4
P
PrintablesMM 3D Prints

Gridfinity - Loctite 20g 3x Bin

Container for the standard Gridfinity system (42 x 42 mm), which can hold 3 LOCTITE® bottles.

Pobrania
43
Polubienia
7
Ocena
5
P
PrintablesFritoBandito

Loctite Bottle Stand

I got tired of my little Loctite bottles leaking whenever I set them down. You can't stand them up and the leaky cap (probably on purpose) leaks Loctite wherever it's sitting. I can't be the first person to get into the habit of propping…

Pobrania
43
Polubienia
9
Ocena
4,5
P
PrintablesDian

Kuepper Küpper pegboard Loctite threadlocker holder

Kuepper Küpper pegboard Loctite threadlocker holder

Pobrania
42
Polubienia
5
Ocena
5
P
Printablesw00h

Loctite Wall Holder

Idea A simple mount for a single round loctite bottle to mount with screws. Printing Standard settings Assembly Mount with two 3 mm countersunk screws to the wall.

Pobrania
41
Polubienia
12
Ocena
0
P
Printablesmel0

Loctite Precision Super Glue Gridfinity bin

One bottle is stored upside down to keep its nozzle from drying up and for easily knowing which bottle is full and which one is being used. Holes for magnets are included. Here is the same model on Makerworld for Bambu Lab printers .

Pobrania
38
Polubienia
14
Ocena
0
P
PrintablesStrathpeffer3D

Loctite Bottle Pegboard Holder Rack

A simple pegboard holder/rack for up to four Loctite bottles. This is a remix from an stl file found on Thingiverse (thing:2690315). The original file had defective hooks and was riddled with mesh errors. I redesigned the hooks and also…

Pobrania
37
Polubienia
10
Ocena
0
P
PrintablesRIP_Plo-Koon

Gridfinity Loctite Anti-Seize Stick (20g)

Simple block to hold the 20g stick of Loctite Anti-Seize

Pobrania
37
Polubienia
2
Ocena
0
P
PrintablesBruninfarina

Loctite bottle holder for wall mount

Loctite bottle holder for wall mount Very easy-to-print bottle holder

Pobrania
34
Polubienia
5
Ocena
0
P
PrintablesJack Bailey

Loctite XXL Superglue Holder for HSW

Simple holder for Loctite XXL Superglue (20g) As seen here: https://www.amazon.co.uk/dp/B07Q8N9ZVF Fits in very snugly, might even hold upside down if you'd rather have it that way. Fits into HSW insert.

Pobrania
33
Polubienia
5
Ocena
0
P
PrintablesPatrol_maverick

Nozzles for Loctite 30ml glue tubes

UPDATE: I compared the strength of this Loctite glue against Bostik “Hard plastic” glue. Check out my other model uploads for “Glue tensile strength test object” for a brief summary of my test results. Spoiler alert, the Bostik glue…

Pobrania
33
Polubienia
5
Ocena
0
P
PrintablesSquirrelbrain

Loctite Stand/Tray

A stand for holding 5g and 50ml/55g of Loctite threadlocker/retaining compound. increase by 0.1-0.5% for a looser fit. *Three versions included

Pobrania
33
Polubienia
4
Ocena
0
P
PrintablesJiheffe

Loctite bottles bin - Gridfinity

This is a simple Gridfinity bin that holds three Loctite bottles. Designed with Fusion 360 and the excellent GridfinityGenerator add-in from Lev Mishin.

Pobrania
32
Polubienia
8
Ocena
5
P
PrintablesOschwald

Loctite Halter/ Loctite Holder

Loctite Halter für 3 kleine 10ml Flaschen. 3 Edelstahl Töpfchen zum befüllen mit Loctite und 2 Nadel Halter rechts und links. Der Halter kann mit der Befestigung an der Wand aufgehängt und bei Bedarf einfach abgenommen werden. Die…

Pobrania
31
Polubienia
1
Ocena
0
P
Printableshygkolk

Loctite Thread Lock gridfinity holder 1x1

Fits 5ml/5g bottle of thread locking/locker fluid. For me the bottle has 1mm of play in the hole, but if it is too tight, I can tweak the model for a looser fit.

Pobrania
30
Polubienia
4
Ocena
5
P
PrintablesMarvin Kaiser

Loctite 243 Halterung HSW

Halter für eine Loctite 243 Flasche (mittelfeste Schraubensicherung, 50ml), passend für das Honeycomb Storage Wall System (HSW). Die Flasche wird einfach von oben eingesteckt und hält sicher durch die Formpassung. Ideal, um die Werkbank…

Pobrania
30
Polubienia
8
Ocena
5
P
PrintablesGadjet

Loctite Precision Holder 5g

Simple holder for a 5g loctite Precision glue bottle that can be affixed with a single nail. Print Settings Printer: Sovol SV01 Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: N/A PLA N/A Category: Tool Holders & Boxes

Pobrania
29
Polubienia
3
Ocena
5
P
PrintablesYourigh

Loctite superglue holder

I kept knocking over the glue box, so here is a stand for it. Printed in vase mode 0.6mm bottom and 0.6mm extrusion width.

Pobrania
28
Polubienia
4
Ocena
0
P
PrintablesOskari Nykänen

Skadis loctite super glue holder

Holds one Loctite super glue bottle and possibly others of same size. Printed in black ASA but most materials are fine. No supports required. Requires two universal hooks. https://www.printables.com/model/323748-skadis-universal-hook

Pobrania
28
Polubienia
3
Ocena
5
P
Printablesartsef

Loctite Glue Tidy V3 & V3.1

This is version 3 of the Loctite Glue Tidy, enabling a centralised holder for several of the 20g Loctite variety of glues and bottle holder for the SF770 glue primer (used with Loctite 435.) Update: V3.1 added, where the centre and…

Pobrania
27
Polubienia
2
Ocena
0
P
PrintablesPablo1987xxx

HSW Loctite Box Honeycomb

Loctite 3 x 30 mm HSW

Pobrania
27
Polubienia
4
Ocena
5
P
PrintablesBlakadder

Loctite Precision Max Gridfinity bin

Quickly mashed together a Gridfinity bottom base template with a Loctite Precision Max 10g bottle upside down holder

Pobrania
26
Polubienia
2
Ocena
5
P
PrintablesArno

Loctite bottle holder for ikea Skadis

Holder for a 50ml loctite bottle for ikea skadis pegboard. To be printed upright, there's very minimal support needed for the pegs. Overal dimensions: Please comment if you have any questions or requests.

Pobrania
25
Polubienia
9
Ocena
0
P
Printablesartsef

Loctite Glue Tidy V1.

Having the Loctite 435 glue primer (30ml) bottle topple over a couple of times and (apart from the fumes!) wasted its expensive contents, I thought it time to create a device which would not only prevent the same happening again, but also…

Pobrania
25
Polubienia
3
Ocena
2
P
PrintablesPouOu

Pegboard Loctite Glue holder

Fits both Loctite and Zap A Gap 7g/0.25OZ and 5g/5ml. Probably other types as well. The hole is 29 mm x 20 mm. Fastened with a screw or similar. Fits pegboard which is about 25mm / 1 inch between the holes. Needs support on printboard if…

Pobrania
24
Polubienia
7
Ocena
0
P
PrintablesTritschi

Loctite Box

Created this simple box, as my Loctites always flew around. Added a little color indicator on top of the cap (green and blue) for the two different kinds of glue. Blue for screw secure and green for retaining compund. Use color as you…

Pobrania
24
Polubienia
5
Ocena
0
P
PrintablesTimon

Loctite super glue storage

To prevent my botlles of Loctite super glue falling over I made this simple holders. This prevents blockage of the nozzle. One holder is for two 20 gram bottles, the other is for a 20 gram and 5gram bottle.

Pobrania
24
Polubienia
4
Ocena
0
P
PrintablesLast_90

loctite wall holder

Wall mounting for 5 10ml loctite bottles

Pobrania
24
Polubienia
2
Ocena
0
P

Loctite 5331 tip

Printed with Bambu X1, 0.20mm nozzle and 0.06mm layer height.

Pobrania
24
Polubienia
1
Ocena
0
P
PrintablesJulien Mairy

Loctite401 / 406 Wall Holder - support mural - super glue

Loctite401 / 406 Wall Holder - support mural - super glue

Pobrania
23
Polubienia
2
Ocena
0
P
PrintablesFabian

Skadis/ SKÅDIS bottle holder 2 x 35mm round and 5ml loctite

Bottle holder to fit 2 35mm round bottles (+0,5mm clearance) and a small bottle of 5ml Loctite inbetween. Additional pouche for whatever you like. Needs to be combined with 2 of the universal hooks by…

Pobrania
22
Polubienia
8
Ocena
0
P
PrintablesPiX

Plug for Loctite Power Epoxy syringe (larger walls, 0.6mm nozzle compatible)

This is a simple remix of https://www.thingiverse.com/thing:4909930 with thicker walls allowing printing using a 0.6mm or 0.8mm nozzle You can view/edit/export it with OnShape:…

Pobrania
22
Polubienia
1
Ocena
0
P
PrintablesJ_mason555

Bott square peg board loctite 1g glue holder

Loctite glue holder for bott square peg board

Pobrania
21
Polubienia
13
Ocena
5
P
Printableslinlunson

Loctite glue holder

I found that these Loctite glues set very easily once tipped over, even with the lid on. I stick these holder directly in drawer. You can print it in two color to have a nice look.

Pobrania
20
Polubienia
1
Ocena
0
P
PrintablesKerri Green

Multiboard Loctite 248 and glue stick holder

Multiboard Loctite 248 and glue stick holder.

Pobrania
19
Polubienia
1
Ocena
0
P
Printablesstenzy
Pobrania
18
Polubienia
4
Ocena
0
P
PrintablesPowahSerg

Garage Loctite and pen tray

Will fit 6x 10ml loctite bottles and pens up to 150mm in length.

Pobrania
18
Polubienia
3
Ocena
0
P
PrintablesDannyWit

Loctite 0.35oz. Glue Holder

This is a 1x1 gridfinity module for a 0.35oz. Loctite Super Glue bottle.

Pobrania
17
Polubienia
1
Ocena
0
P
Printablesplaid_brad

Loctite 6mL Tube Holder

If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad I just wanted something to hold the tubes upright on my work bench. Simple holder that will hold 3 of the 6mL tubes.

Pobrania
17
Polubienia
3
Ocena
0
P
PrintablesBlakeB

Loctite Holder

Why I Designed This I wanted something to keep all my different loctite (Red, Blue, bearing mount, ect) in the same place in the service truck. I have been using this in the service truck for a couple years ( I used a small bolt and…

Pobrania
16
Polubienia
9
Ocena
0
P
PrintablesTimothy Shotts

Loctite holder

Holds a 0.20 fl. oz. 6ml bottle of loctite. Wide opening for easy aiming and tapered to the bottom to align the bottle. Windows on both sides.

Pobrania
15
Polubienia
1
Ocena
0
P
PrintablesGreen Joe

Superglue stabiliser base (anti knock-over) for Loctite precision max

Print settings: Spiral vase mode 0.8mm wall thickness (standard 0.4mm nozzle) Single wall Original design file here if you want to modify:…

Pobrania
14
Polubienia
6
Ocena
5
P
PrintablesMac

Loctite 10ml Multibin Top

Multibin Top for 3 pcs Loctite 242, 243. I have only chinese fake LOCTTLF versions and I hope that size fits for original too. 29 mm version is easy to remove. 28 mm is tight to bottle.

Pobrania
13
Polubienia
4
Ocena
5
P
PrintablesJakeShelf

Gridfinity - Loctite Glue Holder x3

One of the constants on any workbench is glue and adhesives. And super glue in its various forms is often the first go-to adhesive. This has been designed with a slight angle, so when you grab the bottle, it comes out a little easier…

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesOrbCorp

Gridfinity 1x1x7 Loctite 11g Adhesive/Glue Tube Holder + Mixing Nozzle Holder

Here is my solution to organize the 11g Loctite adhesive tubes. I designed one with a stacking lip for better storing when not in use. Additionally I designed a 1x1 unit for storing the standard mixing nozzles. EDIT: I revised the nozzle…

Pobrania
12
Polubienia
4
Ocena
0
P

Loctite Go 2 Glue Holder - For 3.5oz Bottles

Holder for Loctite's Go 2 Glue. This holder keeps the glue bottle upside down and ready for dispensing. No more waiting for air bubbles to rise up. The holder also gives you better leverage to open the cap. Easy print even in 0.3mm layer…

Pobrania
11
Polubienia
1
Ocena
0
P
Printablesmel0

Pritt glue stick and Loctite Power Glue Gridfinity bin

I bought a set that came with these two in addition to Loctite Precision super glue (see my other Gridfinity bin for that one). The Pritt stick is the one with approx 26mm diameter. Fusion 360 model included for remixing.

Pobrania
10
Polubienia
2
Ocena
5
P
PrintablesRuumen_ch

Small parts Organizer - oil, grease ,lube, brush, loctite

print upside down. make sure your bridge skills are working Printer: Ender 3V2 Material: PLA Resolution: 0.2 wall: 2 infill: 0% supports: No

Pobrania
10
Polubienia
4
Ocena
0
P
Printableshaavardok

Loctite Super Glue Pegbord Holder

Background I am cleaning up my pegboard tool wall and wanted a better way to hold my tube of Loctite Super Glue. Model description This holder is designed for a pegboard with 12 mm hole spacing and 3.5 mm hole diameter. It is meant to be…

Pobrania
9
Polubienia
1
Ocena
0
P
Printablesfallingcow

Loctite 243 5ml bottle holder - countersunk

Perfect fit for your 5ml bottle of Loctite. Use a 4mm countersunk screw, which can be tightened through one of the hex holes on the front. There's a 2mm hole in the back where you can use a tiny nail to prevent rotation if you want to be…

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesVamcan

Biltema wall Loctite holder

Loctite holder for biltema walls. 24mm hole distance.

Pobrania
8
Polubienia
2
Ocena
0
P
PrintablesAlessandro

base loctite super attak magnetica

base magnetica con magneti da 2mm-6mm

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesTyler Wenzel

Gridfinity Loctite Bin

Gridfinity refined base requiring no supports Uses 6x2mm magnets Marked for Blue, Green, and Purple Use recommended settings for gridfinity bins

Pobrania
5
Polubienia
5
Ocena
0
P
PrintablesInventorIan

Loctite & Screws Tray

A simple tray for easy and clean Loctite application. The tray fits a Kimtech wipe that has been folded twice. Using a disposable wipe is recommended as it largely prevents any buildup of Loctite on the tray's surface. On the top, there…

Pobrania
4
Polubienia
0
Ocena
0
P
Printablesdersian

Gridfinity Loctite 401 and 406 Glue Bottle Holder

A Gridfinity storage bin designed to hold two 20g bottles of Loctite adhesive (such as 401 or 406). The recessed profile keeps the bottles upright and organized, preventing them from tipping over or leaking in your drawer. Perfect for…

Pobrania
4
Polubienia
0
Ocena
0
P
PrintablesNasty23

multiboard loctite holder 31mm ID

easy print, may be a little thin but good for simple holder that saves plently filament 31mm inner round diameter, can be used for other items too Remember to push it in gently into multiboard holder to avoid cracking no supports, prints…

Pobrania
3
Polubienia
0
Ocena
0
P
Printablesdaveyk021

Place to put the Loctite and Deoxit I use on my bench

Place to put the Loctite and Deoxit I use on my bench

Pobrania
2
Polubienia
0
Ocena
0