2746 modeli
Mount for a Logitech C270 webcam for the Prusa i3 MK3. Great for monitoring prints and creating time-lapses. This will require the removal of the original webcam base, which can be achieved by removing the foam end caps, exposing a screw.…
Wydruk około 1,08 €–1,31 € nettoWstępna wycena jednego wariantu
I found this focus wheel at https://www.thingiverse.com/thing:714475 , but it was 11.1mm thick and it made my camera look like a toy so I created a much slimmer one. My final design comes in at 4.4mm so it is much more compact and works…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!),…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
This is my cover replacement for Logitech C270 Webcam. All you need to do is disassembly the original webcam and remove PCB electronics board. The board is fixed in the new housing using the original screws. Pros Click-clack system. No…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Keyboard feet for logitech k270 Printed in PLA
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
Original on Thingiverse: https://www.thingiverse.com/thing:4177079
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The foot / leg on a Logitech keyboard broke, this is a replacement. In one of the photos I have shown the original foot (grey) and the replacement (black) side by side.
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple tripod mount for the Logitech C270 webcam. With so many churches needing to stream services because of the COVID-19 lockdowns, and a shortage of webcams, I hope this will help someone deploy their old C270 - a decent camera,…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
Having a 3D printer without a camera is like driving at night without lights. I decided to create a base that doesn't require any alteration to the MK4 and can also serve as a starting point for others to create their own camera support.…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
v2 of the mount, very easy and fast to install with 8 large zip ties and 4 pcs M6 x25 screws the Logitech G29 pedal to Playseat challenge seat Also working with Thrustmaster t300 RS Print instructions PETG, print 2 times the G code or 4…
Wydruk około 1,78 €–2,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple Webcam holder with a arm for a Logitech C270 Webcam. Works with Original Prusa Mini, i3 MK3, MK4 and similar printers with standard aluminum extrusion profiles. You can Mix&Match the different arms, but i suggest to use the parts…
Wydruk około 2,27 €–2,78 € nettoWstępna wycena jednego wariantu
Logitech C270 webcam mount for an Sovol SV-06. Perfect for monitoring and Octoprint time-lapses. This is a remix of the mount from In3DSpace : https://www.printables.com/model/3991-logitech-c270-mount-prusa-i3-mk3 Print instructions: 0.2…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
This remix brings a consistent, high-quality texture to your Logitech MX Master 3 / 3S . I modified the model to allow Fuzzy Skin on the external surface of the buttons as well as the shell. This ensures a uniform look and significantly…
Wydruk około 5,22 €–6,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The headphone stand / charger is meant for a convenient charging and display when not in use. It is made to fit a magnetic detachable USB-C cable from aliexpress called Fonken. The fit is tight fresh from printing on my…
Wydruk około 7,47 €–9,13 € nettoWstępna wycena jednego wariantu
1x1 keycap for Logitech G915 TKL with Bitcoin logo. I used supports to the bed, using needle nose pliers made removing them simple. Careful not to grab the nibs. --- If you feel like tipping me, send a bitcoin lightning payment to…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Shifter magnet add-on for your Logitech racing wheel. I tested this on a G27, but it should fit any of the newer Logitech wheels. Files: Logitech Shifter Magnets: Standard version that fits a thin M3 square nut with 1.8mm thickness.…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
All available mounts for the C270 webcam somehow did not fit, interfered with something or where just too big, so I made my own. You'll need 3 M3x20 screws and nuts to assemble - because everybody who owns a 3D printer has those, right?…
Wydruk około 0,48 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my attempt to marry Xiaomi Mi Computer Monitor Light Bar and Logitech Streamcam . I'm pleased with both products, but I was so mad that there was no solution to use them together without any stupid workarounds. When I started…
Wydruk około 1,90 €–2,32 € nettoWstępna wycena jednego wariantu
I have very little space where I fly my flight sim. The Honeycomb Alpha Yoke already took out a large chunk of my desk space, there is no place to put my keyboard which is a small Logitech K400+. An underdesk keyboard drawer is not…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
This is a Logitech C270 mount for a Prusa Mini. Print instructions This is a camera mount for the Logitech C270 webcam for a Prusa Mini. As you can see in the picture it mounts on the Z axis motor by friction. It is very tight and wont…
Wydruk około 0,67 €–0,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Got the Logitech C270 HD Webcam from work but got annoyed when assemble it on my HP P34hc G4 monitor as the camera was blocking the screen. Bracket is made for this combo but probably works for other cameras and monitors with a radius of…
Wydruk około 0,79 €–0,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mount your Logitech C270 Webcam to the X-Axis on a Prusa i3 MK2/MK3. The C270 is my go-to webcam for integration with OctoPrint, and this is my favourite "nozzle view" mounting system. Update April 4, 2021: Fellow PrusaPrinters user…
Wydruk około 4,07 €–4,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
When the rubber on your mouse has decayed more dramatically than my will to work after vacation — it’s time to 3D print a fresh shell for those sweaty gaming sessions
Wydruk około 6,23 €–7,61 € nettoWstępna wycena jednego wariantu
This adapter lets you connect a Logitech C270 webcam to a standard, ¼" threaded tripod mount. I use a small Manfrotto tripod to capture timelapses and monitor my prints, so I wanted to be able to put the webcam on a standard mount. The ¼"…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple remix with joined parts of https://www.printables.com/model/73423-logitech-g915815-vertical-keyboard-stand Update 11/11: I also recently purchased an Apple Magic Keyboard 2, the fit isn't perfect but it works well
Wydruk około 2,13 €–2,61 € nettoWstępna wycena jednego wariantu
20 deg stand for a M70 Logitech trackball
Wydruk około 1,53 €–1,87 € nettoWstępna wycena jednego wariantu
Stores a Logitech Pebble M350 on a Skadis system
Wydruk około 2,19 €–2,68 € nettoWstępna wycena jednego wariantu
Can't press any buttons no matter how hard you shake the case, therefore protects the fragile switches when carrying the mouse in a bag. Logitech is using bad quality switches on this mouse (google: G604 double-click) which break even…
Wydruk około 5,36 €–6,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This remix has an obvious and a few less apparent design changes. The most obvious change is that i opened up most of the cover area by removing the top an bottom layers and thus revealing the infill. (I needed to do some geometry…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
A very smart way to swap your steering wheel for g29 and g27. it has a hole that is 10 mm to lock the steering wheel into place. Use a pen, screw or anything in that hole. You can also 3D print a pin that is 50 mm long and 10 mm in…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
I found that when deciding on a camera mount, I didn't really need the ability to rotate my camera left and right, but if I was printing something tall, I'd just need to be able to tilt my camera up. So I came up with this simple…
Wydruk około 0,80 €–0,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wanted a cover for my C610 that just worked. Designed this in Fusion 360 and it works great! The thin ring front means you can see the LEDs on the camera when they're on whether the cover is opened or closed. This uses a print-in-place…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
You like my Work? Support my efforts and push the like ❤️ Make my day and post yout Makes 🤗 I was not so happy with the existing solutions for logitech webcam holders so I thought about it and created a new design and solved another…
Wydruk około 1,98 €–2,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a holder for a logitech meetup, so that you can place it on top of a TV. You simply slide 2 of these holders onto the logitech meetup, and then you can place it on top of a TV. It might not work on every tv, but should work on…
Wydruk około 4,03 €–4,93 € nettoWstępna wycena jednego wariantu
I changed my Raspberry Pi camera for a Logitech C920 so I had to make a new mounting bracket Note that i did not modify or create new components, i assembled some existing components to obtain a simple Logitech C920 Camera Mout for the…
Wydruk około 1,13 €–1,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed this to hold my Z5500 control pod against the wall. You will need to unscrew the included base that comes with it. There is a hole at the bottom for cords to come through and I exposed the 2 inputs on the side as well. I just…
Wydruk około 4,35 €–5,32 € nettoWstępna wycena jednego wariantu
Bit of a mash up I was already using the X-axis cable strain relief clip, so I incorporated geektoybox’s C270 webcam mount. Perfect for spaghetti detective or general nozzle/print checking. Added an extra 10mm offset towards the rear to…
Wydruk około 0,99 €–1,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
WARNING : Mouse will not fit correctly without the 40° riser. A box for Logitech MX Ergo mouse with a 40° riser . All risers should have the same base shape, but I can't guarantee that lower angle risers will work. Features Protected in…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Kingroom kpl1 V2 camera mount for Logitech C270 (Not sure if it will fit V1) you will need 2 screws M3 6mm 1 screw M3 18mm ****this screws was included with the printer**** I included the step file print setting 25% infill no support…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
Simple camera mount for Voron no supports needed Necessary screws: 3x M3x8 1x M3x20 2x M3 hammer nut
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
I used a version of In3DSpace's C270 mount on my MK3S+. After upgrading to a MK4, I wanted to mount my camera similarily. Rokkdaddy's C270 mount had the correct look to fit with the MK4 X-motor mount, but too long arm for my use (my…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
logitech keyboard stand mk270
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
💬 Summary A set of rear wall spacers designed for Logitech G920 racing pedals . These structural bumpers create a necessary gap between the pedal unit and the wall, ensuring that the connection cables are not crushed, bent, or damaged and…
Wydruk około 1,20 €–1,46 € nettoWstępna wycena jednego wariantu
You cannot mount a light bar and a webcam on top of a screen, as the mountings and cables can get in each other's way. So you have to stack the two devices somehow. In this case, a Xiaomi Mi Computer Monitor Light Bar and a Logitech Brio…
Wydruk około 3,41 €–4,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a cover that slides over the existing x-axis tensioner and does not require any hardware or modifications to secure to the machine. Use an M3x30mm bolt to self-tap the threads holding the camera to the mount.
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
I printed in PLA 0.3 draft layer height with brims. I had to clean up magnet holes a bit before magnets fit snugly in. There was a bit of a gap between front and back so I used a soldering iron to further sink the magnets in place. One…
Wydruk około 3,73 €–4,56 € nettoWstępna wycena jednego wariantu
hi, a simple cam mount a small one and a long one. Warning ! you can only put them on the right side of the Printer, on the left it will hit the bed
Wydruk około 1,39 €–1,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here is a modded mount plate for the Next Level series, it allows fitment of a USB “Chinese Version” Handbrake (e-Brake) and the driving force shifter together. The factory plate does not allow both to go together without drilling random…
Wydruk około 16,63 €–20,33 € nettoWstępna wycena jednego wariantu
Snap-on pen holder for Logitech mxkeys and craft keyboards. It fits a mechanical pencil well and a Sharpie should hold well, but it does not fit as well as a thinner pen.
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Un simple pupport de télécommande Logitech Rally Plus, mais ça n'existait pas :-) Trous pour vis de diamètre 4 à têtes fraisées. Impression plus jolie à plat avec des supports dans le creux (sauf si vous avez envie de faire autrement)
Wydruk około 2,84 €–3,47 € nettoWstępna wycena jednego wariantu
The small slit at the left edge of the camera opening allows to see the activity indicator without opening the slider. For the print, supports are necessary for the “Back” piece. Assembly Insert the slider into the indentation of the…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
Small snap-in mount remixed from this tripod adapter (by GioSunrider ) for the Logitech C500 and the original Flexi-Arm mount (by mkoistinen ). The mount replaces the original stand and therefore you will lose tilt and sway functionality,…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
I somehow had nowhere to put the mice, and you really don't want two mice on a mouse pad when you only have one hand to control the mouse. Mouse models are enlarged to 101 % of the original for stand purposes. I recommend printing with…
Wydruk około 6,22 €–7,60 € nettoWstępna wycena jednego wariantu
Re creation (not remix) of https://www.printables.com/model/216076-tightening-key-for-the-logitech-driving-force-gt-w Made for easier printing and added comfort Printed at 0.2mm layer height with 30% zigzag infill Also added .ipj file for…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
A stand for the Ayaneo Next that slots into the phone/tablet stand on the Logitech K780, so you can play games that require a mouse and keyboard on the go. Works fine, just be careful when you pick the device up out of it, I somehow…
Wydruk około 5,67 €–6,93 € nettoWstępna wycena jednego wariantu
Logitech C902 Webcam Cover - Sleek and Functional Privacy Solution Protect your privacy in style with this custom-designed webcam cover for the Logitech C902. This 3D-printed accessory is the perfect blend of practicality and aesthetics,…
Wydruk około 0,96 €–1,18 € nettoWstępna wycena jednego wariantu
Its a tight fit so that the cable stays where its supposed to You may need some extra tape on the back(probably not): To mount it just put some tape on the bottom: Here is the cable from AliExpress:…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
The model is intended to replace the plastic handle on the bottom of display holders (for position adjustments) and mount a cam on there. The material I used for printing is ABS as the back of my monitors is oriented toward the windows,…
Wydruk około 1,15 €–1,41 € nettoWstępna wycena jednego wariantu
After getting lose speaker holes on the cover i decided to design those PETG slot to make the speaker holes stronger as the cover is flimsy and makes the holes not straight. Print them not too fast as they are small, then glue them with…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This design is based on a Raspberry Pi camera mount that I modified from Andy’s Y-axis mount for the Ender 3 V3 SE. However, once I started printing in an enclosure, the Pi camera began to overheat. That led me to dig out an old Logitech…
Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu
Anycubic I3 Mega has two pushed out holes on the X axis support box, this bracket snaps in place with out the need for tape or glue. For this model, I’m showing and using the E5150 B525 cover, but you can use any of their covers for the…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena jednego wariantu
A simple privacy cap for the Logitech C270 - Focus Adjustment Mod . ⌀ 17mm with an inner slope of 0.2mm - may fit other similar mods. Features No supports required ✨ Extremely fast print (≤2 min) 💨 Print ≤0.20mm layers recommended What…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Flip before printing. No supports required. I used wood screws 4.2x14 to mount the steering wheel. Update 06.04.2025: - added f3d project Category: Video Games
now on makerworld
UPDATE: I've redesigned my own version of this from scratch, you can find it here: https://www.printables.com/model/800917-logitech-g-shifter-gated-manual-and-shift-knob I remixed the model by simply combining the 'base' and 'top' part…
Easy to 3D print security cover for enhanced privacy with your handy Logitech StreamCam C980. No glue, just click the cover into the frame hinge and mount it on the camera. Easy to open, easy to stay close. Printed in cca 30–40 minutes…
UPDATE: I reorganized the files so they are easy to find in chronological order for printing and changed some file names for better understanding. I deleted the back plate file from the project due to confusion about what to print. I also…
Designed to be as simple as possible and perfectly functional. Easy to install and works wonderfully. I'm selling this model on my Etsy, the CC license is non-commerical for anyone else:…
Clam shell protective case for Logitech MX Master 3 & 3S. Magents Fits together with either four 4x4mm or 6x3mm magnets. Choose the right files below. Location Pegs Cut 2x 8mm lengths of 1.75mm filament. Press fit or glue into the small…
This is a remix F1 Style Steering wheel for the Logitech G29, now allowing you to print the centre part in only one piece making it easier, faster and stronger to print. 3 parts to print: 1x “G29_Center” 1x “G29_Handles_Back” 1x…
Shifter knob mod. Using original screw to mount the adapter, long shaft and locking to prevent breaking and over-tighten. Long version could be sensitive against breaking above the threadline. Short version in use since a few years. Screw…
This is a simple mounting bracket to attach a Logitech C270 to the Ender 3 X-gantry. It holds the camera at a good angle towards the bed and printing head, with the tilt being adjustable. The camera and bracket itself are attached using a…
Remix of earlier designed privacy cover. Improvements is that the base/holder fits better on the camera, and the amount of material required is lessened.
Just a remixed mount piece for the Logitech c270 webcam. I had already removed the mount plate from my webcam for a previous mount so this lets you just screw that into this piece. (it is/was a bit of a mess around to get the screw in,…
FINALLY FINISHED I've tested the final version of this mouse for a couple months now and I'm convinced it is pretty much as good as it will get. Enjoy! Background Story This Model was initially made for school and then continued in my…
Modular Phone stand for Logitech wheels G29/G27/G25. I used M5 screw with self locking nuts for assembly. The system is modular and adaptable for any smartphone. I use this with simhub dash. Print instructions Category: Video Games…
Prints without supports. I used 0.16mm layer height with 15% infill.
Use original screw to secure on shifter. Print Settings Printer Brand: Monoprice Printer: Select Mini Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Anycubic PLA Grey Notes: Any material does the trick. Category: Gadgets
I've recently encountered some technical difficulties with Printables and Stripe, which means I can't sell the complete version of this model with the screw holes right now. I'm actively working to resolve these issues and hope to set up…
Added V.2 models. I find the new design more comfortable. It is a bit lighter beacause it only uses 2 magnets. And the design is better because it should not get loose with time. 3D printed modification that makes your Logitech G29 paddle…
The model can be printed with PLA or PETG, the orientation is clear, no supports are required. Layer thickness of .2 mm is suggested, with 3 lines for the walls. The infill is not relevant because the thickness is a little more than 2 mm,…
Should be compatible with Logitech Headsets G230, G231, G332, G430, G432, G930 but only G332 was tested, and works perfectly. I used Prusa Mini+ with Prusament PLA and default “0.10mm DETAIL” settings in PrusaSlicer. Original author:…
Version 2 is now available for download! Version 2 features a sturdier mounting system that clips in place, no more worries about your webcam falling off the printer! This version also slightly moves the camera back so it has more space…
Update: Added a tolerance test based on feedback from makes. Please check fit with this part and adjust XY scale for desired fit before printing the whole part. Background I took the basic design from my M12x1.75mm shift knob and adapted…
Please keep in mind that this only fits the GPX 2. Enable tree support for cleaner screw holes and easy removal. Can be printed out of any material, preferably stiffer ones, but still very usable even with PLA. Base alone saves around 8g…
This is my take on building the perfect gaming mouse. Just 27 grams, without sacrificing ergonomics. It’s based on the Logitech Superlight 2, and in my opinion, it carries the legacy that Logitech has built over the past two decades far…
Basic case for Logitech MX Master 3. Snaps together with two 6x3mm magnets. The Magnets should be a push fit. EDIT 23.04.2022: I added the raw STL files as requested by albza EDIT 24.02.2025: Added a V2 where the pockets for the magnet…
LogitechG305 Mod compilation. You will find everything you need to fully modify your G305 and tinker with it to your hearts content… or maybe just create your own mods :D Update 2022.7.6 : Added more mods including an insane 20-30gr mod…
Easy to print F1 style wheel. Goes together with glue/epoxy, or if you want the ability to change handles you can use Qty 4 M3x14 screws, Qty 4 M3 nuts, and Qty 8 M3 washers. This design was tested on a G29, but likely fits on G27/G920.…
I have taken ALL of the work out of mounting your Logitech C270 to your Ender 3 V3 SE X-axis. You don't need to do ANYTHING other than have this camera (or camera with similar mount), and this Ender, then just print. No hardware? No…
I had my logiTech headset for a few years but the plastic caps broke and i wasnt able to find any replacements, since the last version that i uploaded i have added two small pins to the inside cap the pins hold the metal part that is in…
I designed my own webcam mount for my Ender 3 S1 Pro. I wanted the cam drive with the Z-Axis. You can use the holes for different positions and cams. I printed it in black Petg and its worked perferct for me . Hope you enjoy. Today…
Logitech G923 Xbox F1 wheel
Modified from an existing design, fits with a 5mm x 3mm circular magnet. Glue needed by the way if you want the magnet to not fall off whenever you take finger rest off, since I made the hole to be 5.5mm wide. If you'd like it to fit with…
you can print it without supports use some 1.75mm filament for the hinges
Print however you want to, my settings were pla .4mm nozzle with .15 layer height. The circular hole is designed to accept a 6mmx2mm magnet glued in place(there is a magnet in the mouse so really any small piece of metal glued there…
This model is COMPLETE as of right now, everything fits as it should. I have played several hours of War Thunder and MFS, my thoughts are as follows: The mounting bracket has a very still hold onto the ThrustMaster desk clamp especially…
WIP! Let me know how well it works. Logitech G29/G920 Quick Release adaptor using 32mm bike seat clamp, like this one . Files Female adaptor for fitting to the Logitech base Male adaptor for refitting original Logitech wheel Male adaptors…
Since Logitech doesn't provide any spare keycaps for the MX Keys keyboard, and I didn't want to buy a completely new keyboard I decided to try and make a replacement my self. Once installed it works and feels just like the original. As…
Left X-Axis Friction Fit Mount I put together to mount my Logitech C920 on the Ender 3 S1. You should be able to use any webcam that has a standard 1/4" tripod mounting screw insert. You will need to print out a 1/4" screw to mount your…
