1167 modeli
A play of light and shadow, kindling for whimsical fables. Open source version of https://cosmicjubilee.com/designs/twinkling-bloom/ - available to buy now! A tealight holder with delicate tendrils growing from its base, designed to cast…
These disks are tools used for making friendship bracelets. I created 8 and 16 slot versions in Fusion 360. To use, start with 7 strings about a foot in length that are tied together on one end in combination with the 8 slot disk. Push…
Update May5 2022 Added the XP and HP pin (heart) stl files from DocKuro 's post just in case people cant find them. Also fixed errors in the Character Board stl and the gcode files. I use Duramic PLA+ Filaments and they print very well…
This is the 3D printed version of the popular children's loom. Print instructions This loom consists of 6 parts, but only 4 are essential (I hope I got all terms right- if someone knows better, feel free to comment). The Frame : The yarn…
Made a potholder loom in Solidworks 2017 after my girlfriend's old one broke. Printed on an Ender 3 Pro, Sunlu PLA, maximum walls for structure. Works like a charm.
This is a simple monster storage box that can fit the monsters standees, ability cards and stat sheets. The idea is to have the smallest box possible using the monster stat sheet as the lid. The box is optimised for 0.3 layer height or…
The xBloom Studio has a groove on top that allows for holding a phone. I found that it didn't quite hold my case-less iPhone securely enough. The phone would frequently slip out and fall flat, especially when using the grinder. This phone…
This is a monster attack deck holder for Gloomhaven and/or Frosthaven. Main features of the deck holder: The holders are stackable to take less space The fusion 360 model file is included, if you do a remix, please post your modified…
These boxes are sized to hold a full set of sleeved cards, with a stack height of up to 40 cards, the maximum size of a modifier deck that I'm aware of. My own set is Printed in Das Filament matte black at a layer height of 0.1mm, using a…
A seed packet storage box for Baker Creek Heirloom Seed Co Seeds from rareseeds.com. My wife loves buying seeds, so I wanted to make a better storage solution for her than a random amazon box. This is a remix from Whiyt’s Rugged Box…
This tool will help fix small holes at patch them up in a flash. Printing all the components took ~2.5 hrs and the actual speed weaving was less than 45 minutes including taking the photos for the tutorial. Notes for printing included…
One-sided tokens to replace the double-sided tokens in game. Uses the Gloomhaven font (Pirata One Regular) and uppercase to make some characters easier to differentiate. These are designed to allow you to change filaments as you print to…
Fork for stringing rubber bands Loom Bands
separate into parts for easy mmu coloring 1x3mm magnets press in. use a little glue if magnets are a little loose. My container for these tokens can be found here . these work with my miniature base and HP dial system will be adding…
A hex stand for flying units in Gloomhaven / Frosthaven. Made so they can fly above printed terrain pieces. You can stretch out the feet if you want a taller stand. There is a straight stand so the feet fix in a hex, and an angled stand…
I wanted a deck holder that let me take the full deck with easy for shuffling, as the rest of models in internet have the back in full.
Oliver Wendell Jones : Hacker : Bloom County
Condition Token Box for Gloomhaven, Jaws of the Lion with magnetic Lid. Made for my Condition Tokens for Jaws of the Lion , but will work with any 15x15mm square tokens. Holds 7 of each with a slot for extras. (One of each token is also…
Opus and Lola Granola Bloom County +plaque version
Tento model je možno využít při tvorbě náramků, náhrdelníků atd. Není třeba nijak sestavovat
The Eclipse Bloom Vase is a striking blend of organic beauty and modern artistry. Its flowing spiral form mimics the movement of nature, while the delicately sculpted leaves add an elegant, botanical touch. Finished in a deep matte black,…
Print in place flower that blooms. Model size is approx 75mm diameter x 50mm tall, opens up to 130mm diameter. Pictured model printed at 0.15mm layer height with 0.4mm nozzle on Prusa MK3 in PLA plus with standard settings. After…
Thank you for making my 3D model part of the short list for the Printables Award 2025 TY for your support ! Fingers crossed ! I hope lots of people will have fun with this machine because i sure did haha For the base if your printer bed…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. It means a lot, and us designers really appreciate it. Overlay tile replacement for the board…
A beautiful lotus-inspired decorative bowl, perfect for fruit, candy, keys, jewelry, or home decor. Designed to print easily without supports and look great in PLA, PETG, or silk filaments.
Premium versions of the models found here: landable and multi-color landable and Printables Store . This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 3 Tile Type: Difficult Print Settings Supports: No…
Multi-material/Multi-color version pictured above available on my Gumroad Store Yet Another Wooden Crate. This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 2 One version has a flat bottom for easier printing.…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
A tool to easily insert cables into split wire loom tubing. I created this tool for a friend in sizes 8.5mm, 10mm and 13mm. If you need another size you can just take the 10mm version and scale it. Please leave a like if you enjoy my…
A new organizer with little waste of material that actual fits everything. I really like the ideas behind some organizers that I saw at Thingy, but they use very thick walls and big filling blocks that add time and material in excess. So…
Multi-color/Multi-material and Flat-Top/Landable Treasure Chests available on my Gumroads Store and Printables Store . Overlay tile replacements for the board game Gloomhaven or any 28mm table top gaming. Tile Count: 6 Gold, 6 Silver Pick…
xBloom Studio storage for xBloom Filters, omni dripper 2, and xPod Dock. I was looking for a compact storage solution for all my xBloom attachments. I wanted it to be able to mount to the machine itself as I was using a rolling base and…
Table with chairs version is available on my Gumroads Store and on my Printables Club . This is a overlay tile replacement for the board game Gloomhaven. Table only model available here. Tile Count: 3 Print instructions Supports: No…
This loom/station will allow you to more efficiently make friendship (macrame) bracelets. Especially the more complex patterns with 10+ strings. Suggested use : The bottom arc has 50+ slots to fasten the strings quickly. They are held in…
This is the PERFECT Gloomhaven / Frosthaven / Jaws of the Lion standee! You can print this and rush to show it off to your wife, which will undoubtedly raise an eyebrow at your excitement, in complete disbelief at how great your next…
Landable 2 and 3 hex versions for sale on my Gumroad Store and Printables Store . Overlay tile replacement for the board game Gloomhaven. Finally, players and monsters can now land on every hex of these boulders. No more worrying about…
You can fly/land on me! Overlay tile replacement for the board game Gloomhaven. Tile Count: 6 Note: I made these a while ago and never published them. I didn't love the way the models looked when rendered in thingiverse. I finally printed…
This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 4 Print instructions Supports: No Resolution: 0.10mm Infill: 15% Encouragement If you like what I'm doing or use this in your game consider buying me a coffee…
Multi-material/Multi-color version pictured above available on my Gumroad Store Yet another Wooden Barrel, this one has rope! This is an overlay tile replacement for the board game Gloomhaven. Tile Count: 3 One version has a flat bottom…
I remixed some playerdash boards for Gloomhaven found on thingiverse. For the supports I recommend to place custom a few lines and enable the bridge function in your slicers. (consult the pictures) Remixed from:…
Rock terrain for Gloomhaven board game. Tile Count: 6x (1 hex) Boulder 4x (2 hex) Large Boulders 4x (3 hex) Huge Boulders If you like what I'm doing consider buying me a coffee: Buy me a coffee Print instructions Supports: No
Rock Column terrain tile replacement for Gloomhaven board game. You can flip this on both sides for variation. Tile Count: 6x (1 hex) Rock Column Print instructions Encouragement: If you like what I'm doing consider buying me a coffee:…
This is our version of the Raven's Bite Heirloom from Apex Legends. The file was designed to print on our Prusa Mini, which has a 7"x7"x7" build volume. This is the whole version of the model. If you wish to print the cut-up version as…
!! You will find more for free / pay what you want in my ko-fi shop !! Ruined dungeon walls for the MagHex system for use in Gloomhaven and Frosthaven. Contains a 3x3 mm MagHex base. Prints well on .2 and even on .3 layer height.…
All I did was add holes in the bottom of Robagon 's and liquidlogic 's pillars for 6x3 magnets to use them in Xevin 's MagHex Gloomhaven Tile System (links below) but other magnetic systems will work too. It was an easy and fast edit on…
This is yet another bookcase overlay tile replacement for the board game Gloomhaven. Tile Count: 4 Original non-commercial version here: https://www.thingiverse.com/thing:2758101 Print instructions Supports: No Resolution: 0.08mm Infill:…
Stalagmites tile overlay replacement for Gloomhaven board game. I was not having good luck printing other stalagmites when scaled to 28mm, so I made some that hopefully will work better. Tile Count: 6x (1 hex) Stalagmites Print…
This is a 3D printable weaving loom I made for my kids. They like it and your kids will like it too. All you need is this loom and some wool to get started. Have fun. Tip: Try out GCode Simulator to check your print upfront On…
I made a quick remix of Robagon's excellent bush model because I wanted to have more points in the top layer so that models could stand on it more easily. So, I used the same tricks that I used when making the JotL Destruction tokens to…
Finally some prints of my own (12-08-23) I finally received my Prusa Mk4! I have the ability to rapid prototype a lot faster and have uploaded a new design with many small changes. The overall look hasn't changed but I'm getting good…
This is my take on inserts for Gloomhaven: Jaws of the Lion Everything is stored in the box securely with the lid fully closing, but each tray can be taken out easily to decrease setup and take down time. The character decks are sleeved…
Tile overlay replacement for the board game Gloomhaven. Tile Count: 6 (you can always use some extra) Yet another Bear trap! This was just for fun. Note: Never stick your hand in a live bear trap! Print instructions Supports: No…
This is the Pusi Negotiator . An unofficially designed negotiator for wave filters to be used on the xBloom Studio Omni Dripper 2. Brewing note: I recommend either this recipe designed by @pradyboy for Moodtrap beans, for use with this…
This is the Living Bones model that I've been working on for the board game, Gloomhaven. I'm still fine tuning the model, but I think that it's gotten to the point where it's printable and so I want to show off my hard work! Speaking of…
Flying monsters or summons can land on crystal version 2.0 and 2.5, available on my Gumroads Store and my Printables Club . Overlay tile replacement for the board game Gloomhaven. Tile Count: 2 Print Settings Supports: No Resolution:…
Where jewelry meets nature’s finest form… BloomBowl is a rose-shaped jewelry dish that combines elegance with everyday functionality. Designed to gently cradle rings, earrings, and small accessories among its petal-like curves, it adds a…
Warning: The following may contain game spoilers. Read at your own peril. If you want to print off the initiative tokens, Recommend printing off the monster labels twice so you don't have to keep removing them from the box. Update…
Last year I designed a linkable knitting loom system that would allow users to add/remove links as they work for increases and decreases. This is FAR more usable than the standard round loom because you can easily modify stitch count and…
This is a Rubble overlay tile replacement for the boardgames Gloomhaven & Frosthaven. It has small flat section on top for easy monster landing and like my other models no supports needed. In-Game Info Tile Name: Rubble Gloomhaven Tile…
Increased the length of the anti tipping brackets for better stability. This holds the attack deck for a gloomhaven monster, including the monster stat card. This is meant to be used together with thing 2810528 so that dice are no longer…
Knitting loom for a hat with interchangeable pegs. Grooves in the pegs to allow for crochet hook or weeding tool use. Print 1x board and 42 pegs. Recommend printing the pegs on their backs flat so the layer lines are perpendicular to the…
Doors! I've been working on this for a while, trying to come up with something that would keep a door in place nicely but would also leave room for all the models to stand in the door once removed. Same door fits both bottoms. Print door…
These boxes can be used to store everything that comes in the character envelope for a class (and, if you use the biggest one, even the character mini). This is a remix of jgrg1's character boxes on thingiverse . I've made a few changes,…
🎁Valentines Day Blooming Flower Gift Box 🎁 LINK MY REMIX→ https://www.printables.com/it/model/392721-valentines-day-blooming-flower-gift-box Nozzle 0.4mm Print 0.2mm quality → 0.15 Infill 15% Support ❌ Brim ❌ Here are all our plans, take…
Overlay tile replacement for the board game Gloomhaven. Tile Count: 4 Print instructions Supports: No Resolution: 0.10mm Infill: 15% Encouragement If you like what I'm doing or use this in your game consider buying me a coffee or sending…
a blooming flower with a ladybird switch. I print this a a 0.1 layer height, the petals 1 and 2 will need support around the hook end and i put a blocker to stop wasted support material (see screenshots) the heart U i printed with…
A loom for making woolly hats, I've only made 1 hat so far, but it worked perfectly, sized to fit Prusa (20cm) bed. There's a remix here which is better I think https://www.printables.com/model/669842-knitting-loom I used this video to…
This is a tool for quickly inserting wire bundles in to split looms, sheaths, or wraps. This video shows how the tool is used. There are versions for ½" and ¾" wraps. CAD on Onshape
Overlay tile replacement for the board game Gloomhaven. Two files are mirrors of each other for the two different colored tiles. Tile Count: 4 (4 yellow, 4 gray if you want to get technical) Print instructions Print Settings Supports:No…
I have been constantly getting lost when playing Gloomhaven so i decided to create a dashboard for players that would save some space on the table and help to organize your stuff. It lets you manage basicly everything you need during…
Overlay tile replacement for Gloomhaven board game. Tile Count: 2 Different version of shelf non-remix so I could drop the non-commercial license. Got rid of the "cabbage" ;) Original non-commercial version here:…
I'm using this remix for the Hound (or Wolf) monster in Gloomhaven. I scaled it, made some slight sculpt modifications and posed it. Thanks to Agademer for making one of the cooler wolves on Thingiverse! Category: Toy & Game Accessories
🌹 Death Blooms – Ornamental Skull with Roses Bring a touch of gothic elegance to your 3D printing collection with Death Blooms , a hauntingly beautiful skull design entwined with blooming roses. This striking piece blends organic detail…
Overlay tile for the board game Gloomhaven. The large version is more like a full size wardrobe. The small version is probably closer to the correct size. Since obstacles do not block line of sight in the game I assumed they where below…
My wife and I are getting ready to start Jaws of the Lion, but I realized that the first scenario (and a few thereafter) has a cool set of palisades that I had no overlay for... so I made one! I quickly flipped through the scenario book…
The edges are beveled so it isn't harsh on your cards. It is designed to fit cards with or without card sleeves.
This is a tool I made to assist in getting wires into the “loom” or wire wrapping in my car. There were tools available online but the cost seemed ridiculous so I designed one for myself. The tool is made in two pieces so they will need…
Loom to weave the pearls, for the confection of bracelets or others. Tight assembly without glue. Requires 3 screws M4-20 head H and 3 butterfly nuts for fixing the wires.
This is a Nest with bones overlay tile replacement for the boardgames Gloomhaven & Frosthaven. It has a flat top for easy monster landing and like my other models no supports needed. In-Game Info Tile Name: Nest Gloomhaven Tile Count: 4…
Basic insert for Gloomhaven: Buttons & Bugs. Supports SleeveKings standard thickness sleeves I have thought for better token storage but nothing else that I could make work in the available space. There is about 2mm of lid lift (proof…
The Feather Bloom Vase is a delicate fusion of organic beauty and refined artistry. Inspired by the soft curves and intricate texture of a feather, this vase exudes lightness and sophistication. The elegant relief design brings a sense of…
Thorns overlay tile replacement for Gloomhaven board game. This printed better than I thought it would but beware of stringing. Print instructions Supports: No Resolution: High
Watch it turn: Post-Printing Use a flathead screwdriver to free the base from the rotating collar. Gently work around the full perimeter to lift the collar from the base. After freeing the collar, free the threads by twisting back and…
Summary This is a 3D-printable Yoshimura bloom pattern, specifically a Y-6.2 pattern (meaning it has six-fold symmetry and two rings extend out from the center). The membranes between the panels are designed to accommodate the folding…
Clip on Camera Hood for the Q2 to reduce flare and blooming from LED lights. One is for front (stock) and 200mm LED light bar (see my other models) and another that blocks entire top (for people with risers with light strips). Suggest…
Can't get the raptors claw in game so I modeled my own! I positioned all the handle pieces in the intended orientation to minimize the need for supports. Only 2 of the handle pieces need supports but the areas where supports touch are…
Gloomhaven: Jaws of the Lion Dashboard
Stairs overlay tile for Gloomhaven board game. Rev1 has fewer stairs, Rev2 has more stairs and cracks, Rev3 has better brick definition and slightly larger scale. Tile Count: 4x (1 hex) Stairs Print instructions Supports: No Resolution:…
Here's a nice fast one! I remixed MZ4250's Assassin NPC into a Bandit Guard for use in Gloomhaven! I changed around the hood and cloak a bit, giving him more of a bandanna instead of a scarf, and put appropriate weapons in his hands. This…
Octane's heirloom a butterfly knife. Note : you might need to reduce the sizes to fit your needs
Multi-material/Multi-color version pictured above available on my Gumroad Store Overlay tile replacement for the board game Gloomhaven. Tile Count: 6 Square and Spiral versions with corresponding broken versions as well if you like you…
This iteration on KZ ZSN Pro case may cause less strain on the cable and has space for extra earplugs.
This is a miniature for the Gloomhaven Giant Viper monster. This is a bit on the large side, but I wanted to make sure that the scale pattern came through successfully. It doesn't entirely fit on my bases, so I'm printing a batch right…
Knitting Loom Set This set of round knitting looms is designed for easy 3D printing and smooth knitting. Each loom features evenly spaced pegs, optimized for comfortable yarn spacing and consistent stitch tension. The range of diameters…
A clean and easy-to-print vase model, perfect for home decor, plants, or display use. The model can be scaled freely to match your needs. No supports or raft are required, making it beginner-friendly and reliable to print. Tested…
Print settings: Infill: 50% grid Filament: PLA Supports: None A 20-peg rectangular loom (40 knits per row) loom perfect for teaching yourself or a friend loom knitting. This loom makes a knit tight enough to pass as being done with…
Was wanting to starting knitting projects that required decreases and kept running into issues on the standard loom. There are available products that do this on the market, but I wanted something I could easily scale and add/replace…
UPDATE: Added V2 with material removed for less filament use, raised wall height to keep from seeing the color of the last card, and put a slope in bottom of the vertical car holder to keep them tipped back. Inspired by Gloomhaven Battle…
Updated and improved Single Color and Multimaterial/Multicolor version available on my Gumroad Store and my Printables Club . Flying monsters or summons can land on top of the water. Overlay tile replacement for the board game Gloomhaven.…
![[REMIX] Stone Pillars for Gloomhaven with 6x3 magnet Holes for Maghex](https://media.printables.com/media/prints/191252/images/1793058_b3977f03-5ded-4370-ab38-6b3fc28d5ee3/img_2250.jpg)
