235 modeli
Molvinets / Pomluvnik diameter approx. 50mm Molvinets (also known as Pomluvník ) is an ancient Slavic protective symbol (an obereg ) designed to shield a person from the negative power of the spoken word. According to Slavic tradition,…
Tested with my FLUVAL AquaClear 50, but should work on most other AquaClear hang-on-back filters as I believe they all have the same intake tube diameter. Printing I printed it with a 0.1mm layer height (but used adaptive layers to cut…
Wydruk około 0,49 €–0,59 € nettoWstępna wycena jednego wariantu
Support la crosse technologie by Mika version 2
Additional cover for Fluval Evo 5 gal aquarium to reduce water evaporation. 2 copies are needed. Best to be printed with transparent PETG.
Wydruk około 1,44 €–1,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
feeding flap for Fluval siena 330 fish tank. No special mount needed. For assembly, use superglue
Wydruk około 1,09 €–1,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Because this cosplay requires a wig in my case, I added hoops to sew the horns onto the wig and that way, I didn't have to deal with a headband or clips or anything unsightly. The print is super straightforward. No supports needed, just…
These horns are made to be sewn onto a wig, there are five hoops at the base in order to do that. The model is pretty big to make the proportions of the character work. I personally printed it with the front laying down on a bed of…
Didn't fine any eligent solutions to this problem that retained the ball check valve used for priming the filter. So I made one. 1.5mm holes Print with ABS or PETG. I tested both. Settled on ABS as it looked nicer. Pictured is the PETG…
This is a model of a Canadian Armed Forces LUVW (light utility vehicle wheeled) or G Wagon. I made this by converting a free CAD model of a G Class and a lot of trial and error in tinkercad! Category: Vehicles
Aquarium spraybar for a Fluval 07 series canister filter. I used it with my 207 filter on a 29 gallon aquarium and it produces a low current flow and provides good aeration if placed above water. Laminar flow from the spraybar reduces…
After I bought a Fluval Flex 35l/9g (okay... just because it looked nice) I quickly noticed some flaws and / or opportunities to tinker :-) So I started to redesign and add some things. This is Part 2 (Part 1 is a fan mount for cooling…
This is a chamber 1 filter basket for the Fluval Evo 13.5 gallon Nano Reef Saltwater Aquarium. It's customizable, but there's an included model of the 3 divider model featured in the cover image and photo. The dividers for the…
This basket replace the stock filter in chamber 2 of the fluval evo 13.5 reef aquarium. With the new rooting, the filtration si more efficent. Edit : Revison 2 to include thiker wall for printing easier
Description hi guys, this is the design of millie. Print instructions you can use any layer height . bottom Thickness / Bottom Layers: 6 layers. Layer Height: 2 layers or 3. you can put any size to the figure. there is another design…
A low-flow spray bar for the 15gallon Fluval Flex, designed to reduce the flow in 3 directions. Fits inside the outlet. Use PLA or PETG, no supports required.
This is a spray bar for the Fluval Flex 9 gallon aquarium, uses the existing loc-line flexible arms. Print flat end down, no supports. Greatly reduces water flow for shrimp and fry.
Here are my versions of the Fluval Flex inlet covers that give better coverage around the sides. These where made to fit the Fluval Flex 57L (15 gal) version, and I can't confirm if they fit the other sizes of aquariums. If you try them…
I have a Fluval 3.0 light. I wanted it risen to get better light. This is designed for a rimmed tank. I included the fusion 360 file because I assume someone can make it better. Printed in PLA. Took about 10 hours to print 2x. I have two…
This replaces the stock intake tube on a Fluval FX4/FX6 aquarium filter to add on a surface skimmer. I did about 10 iterations of the float portion to get it sized and floating correctly so it stays at surface. Been running in my planted…
I remixed the feeding hole cover by Robware to have ventilation holes in it. Had an Amano that wanted to go exploring one day… So I just wanted a cover that keeps them in, but at the same doesn't completely block the already limited…
I have shrimp in most of my tanks and have to filter the intake of my Fluval 107 and 207 canister filters to prevent shimp and fry getting sucked in the filter. I designed this because I was tired of dealing with a sponge other the stock…
This is a surface skimmer for the Fluval 07-series canister filters. This contains all the parts you need in order to print and mount your surface skimmer and enjoy that crystal clear and clean surface, free from scum and debris. T-Joint:…
Two simple arms/props to hold open the lid of the 57L (15gal) Fluval Flex aquarium. They are long enough so that they just fit diagonally on a Prusa MK3S printer bed (just a smidge over 29cm in total length). Update: Two shorter…
Fluval Compatible Light Riser – Rimless Aquarium Mount for Fluval Plant LED Lift your Fluval Plant LED light off the water and clear of the tank with this neat light riser, designed for rimless aquariums with 10 mm glass . It slides…
This aquarium was missing a cover for the feeding hole making it lose temperature and water over time. To solve this I created a cover with a drawer to feed the fish more easily.
Thiruvalluvar, commonly known as Valluvar, was an Indian poet and philosopher. He is best known as the author of the Tirukkuṟaḷ, a collection of couplets on ethics, political and economic matters, and love. The text is considered an…
3" Risers designed to fit into the factory brackets of the Fluval Plant 3.0 aquarium light.
This cover lets you pile gravel high above the bottom intake and fits snugly in 15-Gallon and 9-Gallon Fluval Flex
Replaces the stock output of the fluval FX for a more uniform, less direct flow. Perfect if you have fish that don't like too much current. Available in strait or 90 degree version. Only tested on my FX4, but should fit the other FX…
You can find the enhanced version 2 of this project here : https://www.printables.com/model/1199963-solar-powered-rain-gauge-pluviometer-v2 ------------------------------------------------------------------------ You need : A rod of 3mm…
this is a model for the out nozzle on a fluval fx4 / fx6 filter.
Also doubles as a great way to suspend clippings in your tank :) 0.2mm layer height, 3 perimeters, no infill. ASA/ABS or PETG recommended.
I created this to protect my fry and shrimp from getting sucked up in the very large intake filter of the Fluval FX4 canister filter. It also helps with the sand. It will fit the Large Aquarium coop Pre-Filter sponge to the original…
Meandering sigils inscribe a lore of inexorable beauty. Open source version of https://cosmicjubilee.com/designs/alluvial-crush/ - available to buy now! This tealight holder features a pattern generated from a reaction-diffusion…
Fluval Flex 9 Gallon Sliding Feeder Cover. PETG, 10% infill. Glue on the slide retainer
Cover for chamber 2 and 3 There repace le stock cover There is the space for the lightprime 16 HD on chamber 2 and auto-top off system in chamber 3
The pump on my Spec V moves a lot of water, even on low setting. This outflow nozzle mod allows me to run the pump at full capacity (better filtration, more water cycling) without turning my tiny 5gal aquarium into a whirlpool. This part…
This is a spray bar i designed for my Fluval FX6 canister filter. I purchase my filter 2nd hand and it didn't come with the factory piece. i found most of the 3d printer options created too much current in my 110 gallon tank. This does a…
Modelled these Lid Props for my Fluval Flex 123l. For My configuration you need to print: -2x Fluval Flex 123l Front -2x Fluval Flex 123l Corner
Modelled these Lid Props for my Fluval Flex 57l. For My configuration you need to print: -1x Fluval Flex 57l Front -2x Fluval Flex 57l Corner
A quick remix of my LUVW / g-wagon model. Enjoy the extremely tippy, lightly armored but still overweight C&R variant in all it's glory. Category: Vehicles
I have modified all of the parts based on a three photos of the actual prop and the interview with the original builder and Adam Savage on Youtube. Added routing for LEDS (2No. Red 1 No. Green 3mm and 2No. white 5mm, 1s battery, TP4056…
A short version of my spray bar ( https://www.thingiverse.com/thing:4661414 ) Made to be compatible with the Fluval 07 series canister filters. Prints in one piece. Supports on bed only. Print Settings Printer Brand: Prusa Printer: i3 MK3…
This media basket is a remix of https://www.thingiverse.com/thing:4388453. I loved the idea of the original design, but felt it needed some modifications: There is now small cutout on the trays to accommodate a temperature probe, such as…
Fx6 Locking Lid Handle I 3d Scanned , Works Great as a replacement. Could use It With the fx5 Filter Also. Post Up Some Pictures Completed. Please Do Not Resell Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
Simple shroud for Fluval Nano Plant LED light. Shroud sits on the lower edge of the light as shown in the IRL pictures. Aim is to control the sideways glare Category: Other
A nozzle / spray bar for the Fluval Flex 32.5 US Gal / 123 L Aquarium. It's quiet, maintains some surface agitation, and greatly reduces current in the water. Good for bettas or other fish that don't do well with strong currents. Plugs…
This is a replacement part for the rain gauge cone on the Davis Vantage Pro/2 weather station. It prevents debris from entering the rain gauge and potentially blocking the rain gauge. It sits directly on the bottom of the cone and can be…
Frustrated with the lid during maintenance, I decided to make some props to hold them up while I worked in the tank. I haven't tried other tanks like the Flex or Spec range of tanks but do let me know. Printed diagonally on an Ender 3 v2,…
print with the inlet facing up, no supports needed, recommend PETG.
I've been looking for a 3D printed spray bar design for a Fluval Spec III (2.6 gallon) aqarium for some time, but with no luck. So, I went ahead and designed one instead! Tested on my aquarium successfully; it's not a super tight fit, but…
Fluval Flex 9 Gallon Feeder Cover. I used PETG, 5% infill, Plate supports. Can make with whatever parameters you want.
Replacement intake strainer to prevent filter from sucking up shrimp and small fish. Double height for more flow.
Replacement intake strainer for Fluval FX Series canister filters. Hole for mounting is 24.9 mm in diameter. Strainer holes are small at about 1.6 mm squares. No obvious reduction in flow with the Fluval FX4 over the stock intake strainer…
The pump in the Spec V is far too powerful for such a small tank. I'd seen several flow diffusers on thingiverse, but they were all for the old version of the tank. The new Spec V has a larger 13mm discharge fitting, and none of the other…
2D wall art. If printed with .2mm layer height, Start black then colour shift at 2.20mm to white. To keep my models free, Please LIKE and SHARE this page.
A simple light shade for the aquarium light: Fluval Marine Nano. This light shade slides over the top of your Fluval Marine Nano LED light fixture and keeps excess light from ruining the view. Especially helpful for tanks or lights that…
Made this for my 75 Gallon Aqueon tank, since all I was using before was some clamps and a block of wood.
This is a chamber 1 media filter basket for the Fluval Spec aquarium. It's customizable, but the models featured in the cover image are included. They definitely fit the 2.6 gallon version and probably fit the 5 gallon version too because…
This is for the Fluval Flex 32.5 gallon aquarium. This has two removable screens, that are held in place with the wedges on the side. I use Bio balls in the bottom, carbon in the middle and a filter mesh on the top. This is a snug fit,…
Lets you replace the original output pipe of the Fluval 107 or 207 to a small soft flow bar.
Floating plants (like Duckweed) getting caught in the filter outflow causes them to get flung into the water, where they usually get sucked up by the filter. This solves that by keeping them away from the waterfall. Additionally, it…
The balloon horses made by blitzo and fizz in helluva boss
Split into 4 segments to fit on 256 x 256 build plates. Can rest in place but recommend gluing together with aquarium safe glue. Printed in PETG for water/heat protection. Has hole in back for aquarium equipment wires. Material: PETG…
The best Valentine´s day pokemon is here! Let me introduce you to Luvdisc! Designed in Fusion360 and printed on Prusa mini+. I would suggest you to print it with supports on print bed to have nice edges on the bottom and the circle for…
This is a wireless tipping bucket rain gauge powered by a little solar cell and a supercapacitor. After calibration test, each swing of the bucket is 1.15mL. Funnel radius is 80mm, then each swing mean 0.057mm of rain (on 1 m²). To build…
A stand that is about 60mm tall and goes into chamber 1, it holds 10 BioSpheres made by Maxspect, specifically the Nano-Tech BioSpheres. The central shaft is for being able to pull it out when needed. I use this in conjunction with a…
Screw holder for Fluwal FX5 Akvarium Filter
The plastic lid that comes with the Fluval Spec 5 Aquarium is extremely lacking. It doesn't have anything keeping it in place and has a long, open slit down the length of it that your fish can either jump out of, or your cat get in to. I…
I wanted to build some speakers for my desk. I tried to find a speaker with enclosure dimensions that would fit on a 250mm print bed. I settled on the Markaudio Pluvia 7.2 HD for its flat response and bass extension to 50Hz if put into a…
A quick mod added to model made by by Goldballz Designs . I added a bevel inside near the intake end to allow easier printing without supports. It will fit the Large Aquarium coop Pre-Filter sponge and the one from the amazon link below…
Die Halter sind für das Aquarium Fluval Flex 123 l. Da im Sommer die Temperatur um Aquarium eines Freundes gestiegen sind, wurden die Abstandshalter gedruckt. Es gibt drei Höhen: kurz - 10 mm mittel - 30 mm lang - 50 mm Es werden je Seite…
Just rounded the edges off for smooth surface and to avoid any fin damage
After I bought a Fluval Flex 35l/9g (okay... just because it looked nice) I quickly noticed some flaws and / or opportunities to tinker :-) So I started to redesign and add some things. This is Part 5 of the project. The whole project…
Spray bar specifically designed for the Fluval Spec III Aquarium. I do not have one but I hear that the Fluval Spec V has the same pump so this should also work with that as well. It is designed to snap onto any ball joint with an 11mm…
The factory lid for the Spec V 5 gallon fish tank is kind of crappy. It's awkward and a nuisance if you want to be able to mount a better aftermarket light, and it is a pain to simply feed your fish with this big slab of plastic in the…
This is a remix of the Fluval FX6 Intake Pipe created by Dezvinci. I had trouble with the coupler pieces he designed not fitting the pipes and intake strainer so I redesigned them. I also remade the coupler for the tube to hose joint so…
This is a basic filter cover for the Fluval Spec V all in one aquarium. The cover is designed to be printed simply and then placed on top of the filter utilizing the slot. This slot is just wide enough to accommodate for the filter wall,…
You will need to print the .stl files and then glue them together. Then simply add a pin. Program used: OnShape Tested in CraftWare
Filter optimised for 3D printing.
After upgrading my Spec 16 stock light to the Plant 3.0 as per Fluvals advice I was not happy with how it sits in the lid. This mount replaces the extending arms from both ends of the light and lets it sit securely in the opening. There…
Official merch from “Akuma no Otto”! This was a prop I ended up putting together for a super last minute cosplay, but I liked how it came out. I took some creative liberties with some of the design aspects, but overall I think it’s fairly…
This is an adapter that replaces the original intake of the fluval 107-207 (might fit 307-407?). It lets you use the aquarium coop Medium pre-filter sponge to filter more debris and prevent shrimp and fry from being sucked in.
Printed this for my Fluval Hang-On Breeding Box L. It separates the baby platy the mother gives birth to from the mother itself so that she doesnt eat them! It can be printed in one part if you have a bigger printer. I printed it in Part…
We propose a luminaire design, creating different pieces that could be adapted to what most users possess as a conventional spotlight, giving them a new perspective and aesthetics. These are pieces based on simple geometric shapes, which…
remixed for better flow distribution and capped end
Print two sets of the inside and outside pieces. I stuck them together using 6mm X 25mm bolts and 6mm nuts. See https://github.com/danhooper/3d-prints/tree/master for the python files I used to generate the files.
Light extension/lifter for Fluval Spec V. Lifts light up for easier access to aquarium without removing it. Prints on a standard Prusa Original style printer with pain on organic support at the apex of the arch for the bottom bracket.
Wanted to add a pre filter to my Fluval 106 canister filter in my planted tank (to keep soil out of the main filter). This allows for some filter foam to be cut and placed within the cage to act as a pre filter, which is easy to then…
A two part model which you glue together to form a slide in media box. This fits the Fluval Spec V 5 gallon tank. https://fluvalaquatics.com/us/shop/product/spec-aquarium-kit Make sure to use an aquarium safe filament such as food grade…
Un pluviómetro impreso en 3D es un dispositivo diseñado para medir la cantidad de precipitación (lluvia) en una ubicación determinada. Su estructura básica incluye un recipiente cilíndrico o cónico, que actúa como colector de agua. La…
Made this so you can put larger baskets of activated charcoal and bio-beads with replaceable filter media up top.
The pot holder will clip onto the glass of the tank to hold a net pot for plants. There is an included file for making a decorative lip on the side of the glass. There are extensions to hold the default light higher These accessories will…
A simple replacement lid for the Fluval Spec V filter chamber
Update: I've made a new version that hangs down a tad more and has sidecovers. Thus not blinding you when standing to the side of the aquarium. A quickly made light reflector for the Fluval Flex 57L (15gal) aqarium lamp. It simply slots…
This lid is for a Fluval Spec V 5 gallon fish tank. The remix is inspired by the design from @Deividas and includes hexagonal openings for inserting plant clippings. I’ve printed in transparent PETG+ with 100% infil. The solid lid file…
This is a mount that holds a Grässlin Rondomatic 400 autofeeder, on top of a Fluval Flex 57L (15gal) aquarium lid. The autofeeder screws onto the mount (with the original thumb screw) and simply sits on top of the Fluval Flex lid. The…
Thiruvalluvar with dwayne's head
The Markaudio Pluvia 7.2 HD is arguably one of the best 4" full range speakers out there where you can get away without a crossover or notch filter. See one of the reviews . There are multiple suggestions for enclosures on the Markaudio…
This mount holds a Petbank CY-109 autofeeder on a Fluval Spec V without needing to remove the lid. The chute directs food into the space between the end of the stock light and lid. I find this feeder works well with nano foods, especially…
