Liczymy pasujące modele…
As a passionate vinyl collector, I naturally clean my records wet. It all started with a Knosti. In the long run, something more professional was needed. But since I didn't want to spend €500 or more on a more or less overpriced wet…
This is a TS-MA2 Moebius from the show gundam seed. The grunt of gundam seed the TS-MA2 Moebius is prefect for getting shot down in droves when faced with something more dangers than a wet paper bag. This one is 1/144, yes they really are…
Slim cover for the nema23 motor from stepperonline. Use WAGO 221-2411 “Durchgangsverbinder mit Hebel” to connect wires. Use zipties as strain relief. I used it for my DIY CNC Maschine “ Volksfräse VF1 ” Du suchst einen…
BLUE-CNC (nema23) Version 1.0 Like many others, I was interested in building a 3D printed cnc, in fact I opted for the TopsCNC ( https://www.thingiverse.com/thing:3813481 ) But after starting the construction of the TopsCNC I thought that…
A Clip to Clamp a Green-Go Intercom BPX Beltpack on top of a GrandMA2 Console Screen Printed in Prusament PLA Galaxy Black with 20% infill. Laying on the side. No Support needed
shaft adapter for nema23 D-cut shaft
This is an alternative cover/case to the one that Makerbase offers on GitHub ( https://github.com/makerbase-mks/MKS-SERVO57C/tree/main/Shell%20file ). It can easily be printed without support on a FDM printer. Category: DIY
I use the excellent designed bedpan by ramalama2 for my Voron24 with mandalaroseworks kinematic bed. Ramalama redesigned the original Bedpan by Midnite3DP to include a few extras and work with the extra height of the madalaroseworks bed.…
This is a 48:1 split ring gearbox that prints in place. There is also a mating piece that allows the output to go to a shaft or NEMA23 fitting. Recommend printing in Nylon for functional print. PLA works fine for demo/light duty. Print…
WHAT Hand wheel for NEMA23 stepper motor I used on my CNC mill project. While using 1604 ballscrew ( or TR8x4) one scale mark is 0.1 mm. More questions? Don't want to miss any announcements? Do you seek support?…
The Printables version will not be updated. The best place to get it is here: https://captainbobsim.com/product/the-cessna-172-project-files/?customize_changeset_uuid= Find the MobiFlight code under Section 2/Avionics Video guide here…
Nema 23 Motor Cover for GX20 Print Settings Printer Brand: Creality Printer: Prusa MK3 Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Polymaker Polyflex TPU Black Category: Engineering
Holder for NEMA23 type stepper motor Instructions Generate G-Code using Skeinforge and print using RapMan Category: Other
Nema23 Cover. Its a bit of a tight fit for the cables but does look very good once in place.
Modified to utilise an LJ12A3-4-Z/BX endstop sensor, and to fit around both sides of the main Z plate, to reduce motor wobble. There are also recesses to install M6 nuts, instead of using plastic threads. Additional holes in the design to…
I remodeled the model by nka, to work with my Nema24s, while reinforcing the two axis of the part. Worth noting that the mount plate is too thick to use the short bolts provided with the kit. Category: Parts
Various dust hose holders for NEMA23 stepper motors that I have developed for my own CNCs and customers.
Sub250 said that the Huma was only suitable for the DJI 03, however just two parts are required to fit a Walksnail Moonlight as well as some 30mm (M2) standoffs and two 10mm x M2 bolts.
Mount for nema23 motor for CNC machine
Ich nutze diesen Adapter zur Verbindung meines JMC 180W Servos zu der Entsprechenden Gewindestange bzw. an die Adapterplatte. Die Aussparung an einer der vier Seiten ist zum nachträglichen Befestigen und Lösen der Motorwelle von der…
These are just some parts I created for a high-speed Cartesian 3D printer project I'm working on and are mostly just a way for me to teach myself FreeCAD. The parts are loosely based on this design...…
Print as you wish
All information about how to use it and how to print it successfully is below: https://nerd-corner.com/solid-works-stepper-stand-nema-17/
Improves aesthetics: Provides a clean and professional appearance for your motor. Facilitates mounting: Provides convenient mounting options for easy integration into your project. Customizable options: Available in various sizes and…
Mod Features: HGH15 linear rails on the Y-axis for improved stability and accuracy. NEMA23 motors (23HM22-2804S) for the X and Y axes to handle heavier loads and improve cutting performance. Custom-designed motor mounts and extension…
The Gamma2 buckets come with a screwable lid (vs lids that “snap” on) and a cross section directly through the center. This is an adapter which connects to the Modular Hydroponic Tower…
Spacer for motorized z-axis for NEMA23 Printed without support. PETG / layer 0.2 / perimeter 4x.
I wanted to motorize my Z axis on the Fiber Laser Category: 3D Printing
All information about how to use it and how to print it successfully is below: https://nerd-corner.com/solid-works-stepper-stand-nema-17/
Snap on shroud for nema23 stepper motors that can hold a gx16 connector. Makes it easy to wire stepper motors, in my case for a cnc router by adapting the 4 wires from a nema23 stepper to a single cable. The 4 wires are cut to length…
Z motor bracket modified for nema23 motor. This one requires printing with support or a finely tuned machine that can span 6cm. There is "no notch" version that can be printed without support but you need longer shaft / longer pulley then…
This is an adaptation of the Original XY-Gentry Nema 17 Voron R2.4 mount. It now fits Nema 23 motors on the top side. You would need new belt gears to fit the 6mm shaft. It dosent support the cable Chanel, one would need to make a clip-on…
cnc machinable nema23 water cooling block
This is just an adaptation of this cover to this particular key format. Print in slow speed with outside brim. Add your own label with on your slicer software.
NEMA23 Mount for 4in Dust Hose - Pixels to Prototype
Why? If you want a screw top lid on your bucket for your Dust Deputy Cyclone instead of peeling off those annoying stock lids, you'll know why. Screw top lids are not flat, so you can't just cut a hole and bolt on a Dust Deputy. So I…
iphone 12 mini mount for GrandMA2 lighting desks
This cooling shroud slides on a Nema23 stepper and can be fitted with a 60mm cooling fan. It can be cut to the lenght of your particular stepper motor. Usefull if the stepper is mounted in DIY projects like CNC, Lasers or other robotic…
I didn't like the case provided by Makerbase for the Servo57c, it still leaves a lot of open holes for chips to come in and might damage your controller. I wanted it to look more like a professional servo ;). So I started drawing, this is…
I remixed the plate to move the power socket to the one side, resized to fit belkow power soctek and added mounts for 5 way WAGO 221 for power distribution. https://www.amazon.co.uk/dp/B098K32L4B?psc=1&ref=ppx_yo2ov_dt_b_product_details
For SVEN MA230 The grille serves two functions: it protects the speaker cones from mechanical damage and dust, and also serves a decorative purpose speakers. PLA/PETG Print time ~5h ~190 g Nozzle: 0.4 mm Layer Height: 0.2 mm Fill Line…
I liked the screwless design of Mr. Faruqi macropad, making easy to just put together. I remixed the base so I could fit a YD-RP2040 and use the straight copper wire method to wire switches. I just made the slot for the board bigger and…
Dolaďovací kolečko Z osy CNC na motoru NEMA23
Slight mod to the part to increase strength of the holes, Brush arm assembly completed, used brass bushes and 4mm axels.
I have modified the cable emtry hole with a slot so i can pass 4 way connectors through
Phone or tablet holder for GrandMA2 console
Nema23 cable holder cap more at: http://pchrusciel.com Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 200 Infill: 100 Filament: Eryone PLA+ Black Category: DIY
A simple little customizable spacer for your motor mounts. My P3Steel motor mounted the "wrong" way around, and I wanted my Z-couplers to sit a bit lower, so I whipped this up. Hope it helps you!
Stepper motor cooling Fan bracket - used to mount 2 4015 Fans onto the sides of a typical NEMA 23.
When attaching NEMA23 stepper motors with damper to my Railcore® II ZLT, I found that the shaft of the rear stepper just barely fit into the pulley. I created this riser to fit between the top extrusion and stepper mount, raising the…
Got the idea from here: http://www.thingiverse.com/thing:3295201 Please try the test version first as i make these to be printed in ABS. Once I figure out how to add my Mega Mill build logo, I will add that too but leave the plain version…
Tailcover for F5J glider Ultima2 Protects the tail while transporting. Here is link if you wanna mix my design.... https://cad.onshape.com/documents/2a96c057ee259285fd601eab/w/7a59d90345ec40e738353b7d/e/ae0c921d179c08a741a73417 Print…
Locking hook for DJI MA2 protection ring
I built a CNC machine and I did not like the fact that the Leadshinde closed loop nema 23 steppenmotors had an extra connection because the original wires were short. Therefor I designed and 3D printed this cover so I could directly…
I have easy access to second hand nema23 motors and they are much cheaper then nema17's I can find in the neighborhood. This is why I am modifying my Mendel to allow Y and Z to be run using NEMA23 motors. Instructions Print, use Category:…
This is my solution to extend Motorcables including phoenix connectors and a Cable strain relieve. You need: 1x Cable gland M16 (2x if you use the "2 Outlet cover" Variant) 1x Phoenix connector ( the cover fits up to 2x 4-Phoenix…
Der Vorfilter reduziert den Durchlaß am Pumpeneingang für Festkörper und verhindert so den Leistungseinbruch sowie die Ausfallwahrscheinlichkeit der Pumpe im Betrieb durch Blockade des Propellers sowie dadurch mögliche Beschädigungen wie…
The Gamma2 buckets come with a screwable lid (vs lids that “snap” on) and a cross section directly through the center. This is an adapter which connects to the Modular Hydroponic Tower…
Why? If you want a screw top lid on your bucket for your Dust Deputy Cyclone instead of peeling off those annoying stock lids, you'll know why. Screw top lids are not flat, so you can't just cut a hole and bolt on a Dust Deputy. So I…
Der Vorfilter reduziert den Durchlaß am Pumpeneingang für Festkörper und verhindert so, den Leistungseinbruch sowie die Ausfallwahrscheinlichkeit der Pumpe im Betrieb durch Blockade des Propellers sowie dadurch mögliche Beschädigungen wie…
