Wyniki wyszukiwania: mallet

Sortowanie

153 modeli

P
Printableswindi

Mallet-Winding-Machine / Schlegel-Wickelmaschine

The mallet winding machine was developed and built for me by Mr. Fabian Buschulte as part of a student project at Reutlingen University. Apart from a few roller bearings, thread inserts and screws, as well as the purchased counter, it…

Pobrania
1786
Polubienia
74
Ocena
4,75
P
PrintablesFeelgoodFactory

Rubber Mallet Holder for Honeycomb Storage Wall

What is needed? 1x print fille ‘RubberMalletHolder’ 1x ‘insert-empty’ (from original Honeycomp Storage Wall ) How to print? very easy print No brim, no supports needed.

Pobrania
938
Polubienia
186
Ocena
4,8
P
PrintablesDoombeast13

HSW Rubber Mallet Hanger

Rubber mallet hanger for honeycomb storage wall. my mallet is 3.5 inches wide and has a 2 and 3/8ths diameter. it has a 1 inch handle which sits between the hooks Ive made what i think is a better version for 70mm (2.75") diameter mallets…

Pobrania
574
Polubienia
105
Ocena
5
P
PrintablesYogiTech

Ikea Skadis Rubber Mallet Hooks

Hook for a ~67mm (2.6in) diameter rubber mallet to be mounted on an Ikea Skadis board. Print 2 of these. Do as many walls as you need in order to eliminate infill. ----------------- ☕If you would like to support this kind of work, you can…

Pobrania
430
Polubienia
62
Ocena
4,8
P
Printableskriswillcode

Mini Mallet

The quickest way to remove prints from a PEI sheet is a quick, sharp blow from a hammer or mallet. I didn't want to use my actual metal hammer, so I decided to print one. Unfortunately, all of the models I found either required supports,…

Pobrania
425
Polubienia
121
Ocena
5
P
PrintablesRobC

Mallet & Hammer holder for Ryobi Link

This mount allows you to hang two mallets or hammers using the Ryobi Link system. Printed at .30mm without supports using OVERTURE Grass Green PETG.

Pobrania
365
Polubienia
82
Ocena
4
P
Printablesjeffgolden

Multiboard Hammer Mount (including larger one for Mallet)

Multiboard hammer mounts (regular size and mallet size). Use tree support from the build plate. Reccomend using 3 walls. Also recommend using a multipoint bolt and the heavy duty (hooked) snap.

Pobrania
335
Polubienia
26
Ocena
5
P

Mallet

Needed a durable Mallet for camping and diy at home. Attached are different versions of damping pads, so choose your favorite one. The head can be filled with with small lead pellets or sand etc. The pads are glued with superglue. length:…

Pobrania
256
Polubienia
59
Ocena
5
P
PrintablesGerkins

Mallet Holder (Sy's Peglock System)

Remix of the hammer holder. Holds a mallet. Utilises Sy's Peglock System Print Settings Printer brand: Creality Printer: Ender 5 pro (stock) Rafts: No Supports: No Resolution: 0.2mm Infill: 50% but choose what you want. Material: eSun PLA+

Pobrania
242
Polubienia
23
Ocena
0
P
PrintablesClemi

T-Nuts Rubber Mallet Hook for Ikea Skadis

Hook for a 60-65mm diameter ruber mallet to be mounted on Ikea Skadis board. It uses the T-Nuts for Ikea Skadis Pegboards system from 6d6178 . M2 T-Nut , M2 nuts and M2 x 12mm screws are needed for mounting. The hook prints easily without…

Pobrania
239
Polubienia
60
Ocena
5
P
PrintablesBarto

Small and Large Mallet holder for Multiboard / Multiconnect

Small and Large Mallet holder for Multiboard. The small holder fits mallets with a diameter up to 65mm and a handle up to 35mm wide. The large holder fits mallets with a diameter up to 78mm and a handle up to 30mm wide. Is your mallet a…

Pobrania
232
Polubienia
32
Ocena
0
P
Printablesthall72

Lego Compatible (4522.dat) Minifig Tool Mallet

This model is compatible with the lego system.

Pobrania
198
Polubienia
34
Ocena
0
P
PrintablesEuromut

Wall Control Mallet Holder

I made this mallet holder using a centerpiece by Luma specific to their wide array of control designs. You just need a right and left bracket, attach it to this piece and you're good to go.

Pobrania
184
Polubienia
41
Ocena
5
P
PrintablesZach

Pegboard - Rubber Mallet Peg

A simple pegboard mount for a 16oz Rubber Mallet - or any other thick-headed tool with a < 1" shaft and symmetric geometry. I want to keep my pegs fairly lightweight, but at the same time I want to make sure that heavier or more dangerous…

Pobrania
181
Polubienia
30
Ocena
4,33
P
PrintablesScheimann

Mallet Holder (Wallmount)

A wall-mounted mallet holder that uses simple design to make the mallet stay in place, and the handle easy to grab! ~3mm screws should be used to mount it to the wall. The print is currently sized to accept a mallet with the width of…

Pobrania
180
Polubienia
50
Ocena
5
P
PrintablesM@

Parametric TPU Hammer Mallet Cap

Convert your steel hammer into a non-marring mallet with this parametric TPU hammer cap! Perfect for tapping wood or 3D printed parts into place without damage. This design revisits one of my earliest models with improvements to fit, and…

Pobrania
180
Polubienia
127
Ocena
5

Air hockey mallet

finger guard air hockey mallet so that one friend doesn't decimate your hand. trust me it hurts

Pobrania
178
Polubienia
9
Ocena
0
P
PrintablesBlaiseTheHokage

Rubber Mallet Holder for Honeycomb Wall Storage

Hanger for a rubber mallet that attaches to the Honeycomb Wall Storage System Remixed in Tinkercad.

Pobrania
168
Polubienia
43
Ocena
0
P
Printablesawelshman

rubber mallet

dead (rubber) mallet i made the head with tpu at 40% infill so that its a bit flexible and handle pla with 60% infill to give it a bit of strength . i used a drop of glue to fix head to handle .originally made for my grandkids but i liked…

Pobrania
167
Polubienia
21
Ocena
0
P
PrintablesRender Rich

Bird Bone Bike Polo Mallet head Version 004b3

Just a heavy bike polo mallet head. Be sure to anneal the PLA

Pobrania
165
Polubienia
12
Ocena
4
P
Printablesdemo419

Air Hockey Mallet

I found the original model on Thingiverse (https://www.thingiverse.com/thing:28843) created by LeftAngle, but the mallet was too small for a full sized air hockey table. I scaled it up to a standard sized mallet and set it to print with a…

Pobrania
163
Polubienia
9
Ocena
5
P
PrintablesPhenixPapillon

Petit maillet (mallet, hammer)

Un petit maillet avec 2 embouts différents. Pratique pour les emboitements difficiles de vos prints quand il y en a, le TPU n'abime pas les objets. Le manche, impression PLA avec une hauteur de couche à 0.2 et 100% de remplissage. Les…

Pobrania
162
Polubienia
13
Ocena
3
P
Printableschking

Mallet Wall Mount

I remixed this mallet mount to make it stronger and and include a MALLET label. I also modified this mount to attach to Slat Wall 1U Plate A ( https://www.prusaprinters.org/prints/77915-slat-wall-1u-plate-a ). Remixed From…

Pobrania
151
Polubienia
20
Ocena
0
P
PrintablesPetacrack
Pobrania
138
Polubienia
45
Ocena
0
P
PrintablesMrGreen

OneTuff Honeycomb Mallet Holder

You can use this model on a Honeycomb wall system. This is a slightly updated version of the modified hex part. Ill upload the fusion file soon. Its at more of a angle. Stronger than my previous remixes.

Pobrania
136
Polubienia
16
Ocena
5
P
Printablestiebex

Xylophone Mallet for Kids

May need to print with a brim, depending on your bed adhesion.

Pobrania
133
Polubienia
10
Ocena
5
P
Printablesthat3dco

Chainsaw Man Power Blood Mallet

File is split into 3 separate bodies. The handle has a hole to insert a 5/8" wooden dowel for extra strength. The mallet feels real good at around 30-40% infill with 4 walls and can actually crush aluminum cans at that strength. No…

Pobrania
128
Polubienia
22
Ocena
0
P
PrintablesSuperman_chris

Toy Xylophone Mallet

Print laying down with supports everywhere, not just touching build plate. I tried printing upright but the stick begins to move when it gets too tall. Supports: Yes Infill: 20% Filament material: PLA

Pobrania
120
Polubienia
10
Ocena
0
P
Printablesgord888

Customizable Air Hockey Striker/Mallet/Paddle

This is a customizable air hockey striker/mallet/paddle. The ones that were already on this site weren't the right size or shape for my kids air hockey table. The default parameters are for my kids 4' by 2' air hockey table. You can…

Pobrania
120
Polubienia
1
Ocena
0
P
Printableswyattgeroge

Finger Splint - Mallet Finger

Obviously, you need to seek medical advice to make sure something worse isn't wrong with your finger, they'll probably put your finger in a splint anyway, saving you some filament and giving you some peace of mind. Designed to hold a…

Pobrania
118
Polubienia
12
Ocena
5
P
PrintablesM@

TPU Hammer Mallet Cap | Soft Cap for Hammer

Convert your steel hammer to a non-marring mallet with this Hammer Mallet Cap! Simple and clean look Durable design Fits snug on hammer I've been finding myself needing a mallet hammer on recent projects, usually to tap a 3d printed part…

Pobrania
112
Polubienia
36
Ocena
5
P
PrintablesKen226

Pegboard Rubber Mallet Holder

This is a pegboard mounted rubber mallet holder. It is designed for the typical cheap 2.5" diameter head rubber mallet. It mounts to 1/4" pegboard using the plastic push rivets I uploaded to thingiverse. Print using PLA, with 25% or more…

Pobrania
103
Polubienia
17
Ocena
4
P
Printablesroosteralex82

Infant Xylophone Mallet

My older child lost the mallets to the xylophone he got when he was little, but now my 1-year old has taken interest, so we needed new mallets! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: Yes Resolution:…

Pobrania
100
Polubienia
6
Ocena
5

Camping Mallet

Use a density around 25% with a gyroid or triangles infill pattern(PETG). If you have PLA, try using 30%-45% density. Scale the model up by around 25% if you are an adult(or have bigger hands). Any layer height works well.

Pobrania
89
Polubienia
20
Ocena
0
P
Printablesa123qwertz567

Air hockey mallet and puck for small kids table

I modeled this air hockey mallet/bat/pusher and puck as a replacement for a local elementary school. They have an “air hockey table” which in reality only works with a low friction surface. I sadly forgot to take photos of the printed…

Pobrania
89
Polubienia
10
Ocena
5
P
Printablesnischal

Honeycomb wall small mallet holder

This print holds up one of these small mallets which is useful to knock off large prints off a 3d printer glass surface. https://amzn.to/3q01X5K

Pobrania
89
Polubienia
25
Ocena
5
P
PrintablesJoetech3000

Mallet Finger Splint

Remix to work with my mallet finger issue.

Pobrania
86
Polubienia
6
Ocena
0
P
Printablesfreejstn

Halder Mallet IKEA SKÅDIS Holder - TNut

Overview This is a mount for a mallet to SKÅDIS, which uses the T Nut System made by 6d6178 My SKÅDIS is mounted to my Raskog Cart, so I put my Halder 40mm Simplex Mallet up for storage. Realistically, it should work for your 40mm mallet,…

Pobrania
82
Polubienia
12
Ocena
4,5
P
PrintablesPrint-Head

RUBBER MALLET Holder | Gummihammer

Rubber mallet | Gummihammer - HOLDER (note: Can be mounted to the surface with 2 screws. And PETG ftw!)

Pobrania
81
Polubienia
7
Ocena
5
P
PrintablesAC Conception

Universal Pegboard Hammer & Mallet Holder Set

These hammer and mallet holders are designed for pegboards with 25mm spacing but can also be easily screwed into a standard workbench wall. To screw these holders into a pegboard, please use these Pegboard Screw Adapters . Technical Data:…

Pobrania
81
Polubienia
4
Ocena
0
P
PrintablesMaine-iac

Baseball glove mallet

I would recommend printing it at around 80% infill. I printed it in petg but pla should probably work fine also.

Pobrania
80
Polubienia
7
Ocena
0
P
PrintablesNEYLANDER

Mini Mallet Hammer - Part Removal Tool

This is a very simple realistic mallet that can be used as a prop, tool or fidget toy. One of the known ways of getting parts of a PEI build sheet is with a small but swift blow with a mallet and this works a treat for this. It requires…

Pobrania
77
Polubienia
6
Ocena
0
P
Printablesagmcmll

Miniature Joiners Mallet

A small mallet in a traditional joiners mallet style, where the handle locks into the head with a taper fit. My printer is set to slightly overextrude, and this fit perfectly for me. If your printer is tuned for tolerances tighter than…

Pobrania
74
Polubienia
12
Ocena
5
P
PrintablesStudioKosmo

Bikepolo mallethead

I needed a mallethead for my stick, so i created one. Hope someone else may also find this usefull!

Pobrania
72
Polubienia
4
Ocena
0
P
PrintablesSam

Pegboard Rubber Mallet Mount

Pegboard mount for rubber mallet

Pobrania
67
Polubienia
5
Ocena
5
P
PrintablesPolymerToad

Baseball Glove Mallet

There are 2 versions. One is solid, just print it and use it. Second version has an empty space in the middle for a 3/8"x8" Lag Screw. I put it into my print because they're cheap and I had one laying around. You'll have to pause the…

Pobrania
64
Polubienia
9
Ocena
0
P
PrintablesNot much here

HSW-Drilling Hammer or Mallet Holder

Yet another hammer holder for the Honeycomb Storage wall system. This one is big enough, and I hope strong enough, for a heavy drilling hammer. A rubber mallet (bigger but much lighter than the drilling hammer) will also fit OK. It needs…

Pobrania
64
Polubienia
11
Ocena
5
P
PrintablesBen Wyatt

HSW hanger for small mallet

Designed to hold this small crafting mallet , which I use to tap together printed parts on large assemblies. Supports may be needed for the attachment on the back. While I designed it for this specific mallet, I'm sure there are many…

Pobrania
63
Polubienia
9
Ocena
0
P
Printableschrisgabb

air hockey pucks and mallets

glue felt to the bottom of the mallets so it doesn't scratch up the table

Pobrania
62
Polubienia
7
Ocena
0
P
PrintablesBob Rosset

Mallet finger splint - Ferula

I cut my tendon playing soccer. After 3 weeks with a regular splint and changing the tape, it didn't heal, and got worse. So I decided to immobilize the finger, hoping for a full recovery, and avoiding the temptation of: Changing the tape…

Pobrania
61
Polubienia
2
Ocena
0
P
PrintablesUeli

Speaker box for LGB Mallet Steam Loco

Enhance your sound by this speaker box. It fits in the LGB 26851 and technically identical mallet steam locos without modification of the loco.

Pobrania
57
Polubienia
2
Ocena
0
P
Printableskirloi

Mallet holder

Mallet holder Designed for every type of hammer / mallet ⚙ Features: 🔻Size : W for mallet/hammer: 30mm W part: 100mm Depth: 34mm 🔻Editable – blend. file included along stl. for remix purposes Holes made for 4mm countersink screws

Pobrania
56
Polubienia
12
Ocena
0
P
PrintablesKratus

MFT mallet holder

Holds regular rubber mallet To be used with MFT mounting plate - link Required fasteners: 2x M6x60 socket head screw (DIN 912)

Pobrania
55
Polubienia
22
Ocena
0
P
Printablesdonutboy3

Hammer - Mallet - The Quarter Pounder

The inspiration for this is based on the Thwacker. Mine is weight adjustable. The small end unscrews and you can load the head with BB's, lead shot, or pennies (25 of them.... get it.... the Quarter Pounder). You can partially load the…

Pobrania
54
Polubienia
11
Ocena
0
P
Printables3DWP

Wooden Hammer (Mallet) 3D Scan

This is a 3D scan of a hammer made with an Artec MH. https://www.3dwp.nl

Pobrania
51
Polubienia
0
Ocena
0
P
PrintablesBob

Hammer/Mallet

adhesion required, supports optional

Pobrania
50
Polubienia
5
Ocena
0
P
Printablesrav

Glockenspiel Bells mallet stick for children

Just print two pieces and glue them together.

Pobrania
49
Polubienia
8
Ocena
5
P
PrintablesMeganoodle

Pencil Mallet

Another tool to attach to the end of your pencil, or anything else similar. I find it useful to use this with a printed chisel to remove stubborn 3d prints from the bed. The chisel also can be found in my list of models. 0.2mm resolution…

Pobrania
48
Polubienia
10
Ocena
0

Handheld Drum Set with Mallet

A cute little set for kids education and entertainment, we printed ours in PETG but we suggest looking at a variety of materials intended for strength. Filament used in photo- Polymaker PETG in Gold and Polylite in Black PLA

Pobrania
44
Polubienia
12
Ocena
0
P
PrintablesErkHal

Rubber mallet head sleeve

Rubber mallet head for a basic construction work hammer that you can get anywhere. Material Print with TPU, I used 95A Shore hardness TPU. Softer should work too but I wouldn't use anything harder than that otherwise it'll get too hard to…

Pobrania
44
Polubienia
15
Ocena
5
P
Printableschris

Estwing Deadhead Rubber Mallet mount

Estwing Deadhead Rubber Mallet wall mount Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: Prusament PLA Jet black Category: Tools

Pobrania
43
Polubienia
4
Ocena
5
P
PrintablesChris_300m

Hanger for wood mallet

Hanger for wood mallet. 0.25mm layer height supports no 30% infill 4-5 perimeters filament PETG

Pobrania
42
Polubienia
10
Ocena
0
P
Printablesdonutboy3

Quarter Pounder - Extra Beefy (Hammer - Mallet)

This is a rebuild of my original Quarter Pounder ( https://www.thingiverse.com/thing:4830422 ). I found that the handle was a little wimpy and would break off the head. This is a stronger (extra beefy) version. The head can be filled with…

Pobrania
42
Polubienia
14
Ocena
5
P
PrintablesB.Stouder

Mallet Core

Use 5/16in or 8mm shaft

Pobrania
42
Polubienia
5
Ocena
0
P
Printableschrisgabb

air hockey mallets

glue felt on the bottom so it does not scratch up the table

Pobrania
42
Polubienia
2
Ocena
0
P
PrintablesYoshi.T

Combination square and double square holder, Mallet holder for 3/4 french cleat

This holder construct from FreenchCleatBase and CombinationSquareHolder. HolderBase is for customizing. You can customize whatever you want. It may be tight to slide in the holder to the base. I recommend to tap lightly with a rubber or…

Pobrania
42
Polubienia
7
Ocena
0
P
Printableschrisgabb

Air hockey mallet (UPDATED)

Cut out a piece of felt and put on with rubber cement to prevent scratching the table. Category: 3D Printing

Pobrania
39
Polubienia
4
Ocena
0
P
PrintablesBucio.Boi

Screw This! Mallet/Hammer Holder

Requires: 1x Mallet/Hammer 2x Screw This! screws: https://www.printables.com/model/522789-screw-this-hsw-screw 2x Screw This! single inserts: https://www.printables.com/model/522781-screw-this-single-insert Print on back, no supports…

Pobrania
38
Polubienia
8
Ocena
0
P
PrintablesHallstein

Mallet game for children - "Daruma-inspired"

I made a fun game for my daughter. The game is inspired by the japanese toy by the name of "Daruma Otoshi". The goal of the game is to take turns and use the mallet to knock out the body pieces underneath the head without knocking over…

Pobrania
37
Polubienia
3
Ocena
0
P
PrintablesJdraper

Skadis Rubber Mallet Holder

Skadis peg board holder for a generic rubber mallet.

Pobrania
34
Polubienia
3
Ocena
0

Mallet with TPU Grip & Tips

In need of a mallet, but don't feel like buying one? Then go the same route I did and simply 3D-print one. I saw a bunch of 3D-printed hammers on Printables, but none of them had exactly what I was looking for, so I made a model that…

Pobrania
33
Polubienia
18
Ocena
0
P
PrintablesThe Overthinker

Mallet Bear Figure

Stands up well and easy to print. Great expression with mayhem clearly on the mind. I use an A.I. App on MakerWorld then I bring the models into Tinkercad to fix them. See Tree supports below:

Pobrania
32
Polubienia
8
Ocena
0
P
PrintablesRaysWays

Tuning Fork Holder / Stand for Sound Healing or Mallets for Gongs and Bowls

I made this for my wife to hold her tuning forks used for sound healing. You can also put your mallets in it for gongs or singing bowls. It stores everything in a much more compact space that allows them to be enjoyed and showed off more…

Pobrania
32
Polubienia
4
Ocena
0
P
PrintablesCosmicKira

SKÅDIS Hammer / mallet Holder For T-Nut Mounting System

SKÅDIS Hammer / Mallet Holder for the T-Nut Mounting System with the original size and a Large size for bigger hammers / mallets.

Pobrania
31
Polubienia
3
Ocena
0
P
PrintablesAravon

Single piece light duty mallet

A small but handy mallet only takes 26 g of material to print. As 3d printed product is weakest at the layer adhesion, I strongly suggest you to print it horizontally such that the stem would not break easily. It will need support from…

Pobrania
30
Polubienia
2
Ocena
0
P
PrintablesFloze

Mallet wall holder

I designed this mallet wall holder for my Halder Simplex, but it should work for other 40mm mallets too. If you have any questions or advice feel free to write a comment.

Pobrania
30
Polubienia
5
Ocena
0
P
PrintablesPGold

MALLET

Its professional internal structure provides a rigid tool and simple assembly procedure. I made it using PLA. Scale can be modified to your printer spec. Three parts to print: Handle, Left Head and Right Head. Before gluing, check that…

Pobrania
30
Polubienia
0
Ocena
0
P
PrintablesEuromut

Narex Mallet Holder - Wall Control

I created this friction fit Narex chisel holder for the wall control unit. All pieces to print are in one file. This is friction fit, so put the mallet in and press down and it should lock into place nicely.

Pobrania
29
Polubienia
4
Ocena
0
P
PrintablesTorsten Feustel

Converter to Rubber mallet

English: A converter for Locksmith's Hammer (200g) to a Rubber mallet. Deutsch: Der Converter für ein Schlosserhammer (200g) zu einem Gummihammer. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No…

Pobrania
29
Polubienia
10
Ocena
0
P
PrintablesPango3001

Gridfinity 1.5 lb Rubber Mallet Holder

3x2 Gridfinity 1.5 lb Rubber Mallet Holder. Rubber Mallet was from Harbor Freight.

Pobrania
29
Polubienia
3
Ocena
0
P
PrintablesAllister Cons

Allister Mallet

The hat of my character, Allister Cons, turned into a mallet! The hat, adorned with the goggles, has been affixed to the top of a handle. Ready to clobber any who stand in a Lucky 13's way! (Printing notes): I recommend an infill with…

Pobrania
28
Polubienia
6
Ocena
0
P
Printableschrisgabb

air hockey mallet

mallet for air hockey

Pobrania
27
Polubienia
6
Ocena
0
P
Printablesidl3r

Candy 7&11/Mallet Trail Traction Pads x 8

They make great pedals but the tractions pads are not that great. They tend to crack and falling apart in a year or two.

Pobrania
26
Polubienia
1
Ocena
0
P
PrintablesJeno

fictional 009 shorter Mallet for Kato 11-109

Inspired by a comment made by MDitch91 back on thingiverse.

Pobrania
26
Polubienia
6
Ocena
0
P
PrintablesincludeRubiks

Miniture tabletop mallet

Small mallet for RPG, print with supports.

Pobrania
25
Polubienia
7
Ocena
0
P
Printables3D Print Fun

Mallet Holder Screw Wall Mount

3 walls, 15% Cubic infill. I printed in both PLA and PETG, both work fine. I added the STL file, but then you have to add the Cone and Hole yourself. Maybe later I fix this in F360. But then just use the 3MF file. Happy printing :)

Pobrania
25
Polubienia
1
Ocena
0
P
Printableszrlevin

Wall Mount for Veritas Mallet/Marking Gauge

A simple wall mount for the Veritas large journeyman's mallet, held by two screws. The mallet is held by the tapered section of the head above the handle which matches up to the beveled edge on the holder. By happy coincidence the holder…

Pobrania
24
Polubienia
2
Ocena
0
P
PrintablesRPK

Reflexhammer / Rubber mallet

EN: Reflex hammer with chamber for brush and needle for sensitivity testing. The cap nut on the hammer head is size M8. We recommend inserting / gluing washers of sizes M6 and M8 into the hammer head before attaching the TPU parts for the…

Pobrania
24
Polubienia
5
Ocena
0
P
PrintablesJeno

009 fictional Mallet locomotive

This thing is made for a pair of TU-Koppel A chassis. Thanks to Nikolisa for making the cab: https://www.thingiverse.com/thing:7048361 WARNING THIS THING HAS NOT BEEN TEST PRINTED! Built for the Bluewater and Rounders Creek logging…

Pobrania
24
Polubienia
7
Ocena
0
P
PrintablesPaul 3D_4_Fun

Tent peg mallet - light weight

To go with our light-weight hiking / bikepacking tent, I wanted a compact and light tent peg mallet. I had a cup head bolt lying around, which gave me the idea of using this as the mallet face. Stainless steel cup head bolts seem to have…

Pobrania
24
Polubienia
5
Ocena
0
P
PrintablesIndigo Crow

TPU Mallet

there is a slot on the handle for a 4m wood screw to fix the head in place alternatively use CA glue Recommend printing Mallet head with at least 20 percent gyroid infill high durometer tpu Handle 20 percent gyroid petg or asa

Pobrania
23
Polubienia
2
Ocena
0

Music Block and Mallet

Simple percussion music block for music education, includes mallet. We encourage you to experiment with the size, infill density and material types to get different and unique sounds from each print. Filament used in photos- Panchroma…

Pobrania
22
Polubienia
6
Ocena
0
P
PrintablesTeakdamar

Mallet Winder Accessories

I have created some functional accessories and other aesthetic modifications to the awesome mallet wrapping machine! 1) Stick Head Length Guide: 40mm shaft distance. I have found this to be a nice sweet spot for my mallets. 2) Magnet…

Pobrania
22
Polubienia
2
Ocena
0
P
PrintablesBadr

Rubber Mallet Holder for Skadis IKEA

A really simple yet durable Mallet Holder for Skadis IKEA. No supper needed. three sizes available (Small, Medium, Large)

Pobrania
21
Polubienia
3
Ocena
0
P
PrintablesThe Carnager

Mallet holder for french cleat system

I printed the model sideways with snug supports, tree supports gave me a bad finish so use snug standard supports.

Pobrania
21
Polubienia
1
Ocena
0
P
PrintablesKen226

Brass Mallet Pegboard Holder

Designed for 1/4" hole pegboards using my push rivet design. Holds brass mallets with a 3/4" diameter head and up to a .4" diameter handle shank. Print in PLA, using any infill amount desired. It will need supports under the rounded…

Pobrania
21
Polubienia
3
Ocena
0
P
Printablesjumbo donut

Meat tenderizer mallet

This design of the classic meat mallet combines elegance and fashion in preparing meat in a formal yet primitive way. OOOGA BOOGA!

Pobrania
20
Polubienia
2
Ocena
0
P
PrintablesGray256

Small mallet

This is a small light-duty mallet. Print the head in TPU 95A (I used https://www.amazon.com/dp/B0BXNWK6NS?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1 ). It is important to have the middle part that connects to the handle at a low…

Pobrania
20
Polubienia
9
Ocena
0
P
Printablesvirgile-blais

Rubber Mallet Holder openGrid

A rubber mallet holder compatible with openGrid, using a directional snap.

Pobrania
20
Polubienia
2
Ocena
0
P
Printablestnuoccad3asurp

HSW hanger for small mallet - no supports

Sunk the original model just enough to print without supports, still slots in nicely.

Pobrania
20
Polubienia
2
Ocena
0