Liczymy pasujące modele…
This is a cup holder designed to be mounted in the Ford FITS mounting slot in the back seat of the Ford Maverick truck. Parts required: 2X 3mm heat set threaded inserts or 2X 3mm nuts 2X M3X20mm socket head cap screws The tolerances on…
The holder should fit most 8-inch tablets. The sunshade is designed for the Apple iPad Mini.
There are two options: simpler, thinner version bit bigger v2 with small grips for more comfortable use I recomend to print without supports but enable all option showed below You probably should print it with supports if you want make…
I wanted fillers for the gaps between the front seats and the center console of my 2024 Ford Maverick so I don't lose stuff that could fall in the gaps. I made one for the passenger side and one for the driver's side. They are customized…
This is a License Plate mount I made because I refused to drill into the Bumper of my new car (and don't like how it looks when you put it in the windshield). So I made this. It clips around the lower Grill of some 2025 Ford Mavericks.…
Minimalisitc cover for the DJI Mavic Smart Controller
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Je n'ai pas trouvé de pièce de remplacement dans le commerce. Celle ci n'est pas identique à l'originale, mais permet une attache propre de la coque avec un petit clip métalique tout en laissant passer la vis en son centre. Le fichier…
Printed with 0.15mm layer height, fuzzy skin on outer layers with grey extrudr NX2 PLA.
Žáci si podle nákresu vytvoří v online aplikaci Tinkercad vlastní návrh vybraného truhlářského spoje a pomocí 3D tiskárny vytisknou jeho model, který je poté možno využít jako ukázkový model v dílně.
I just took the models from the official dji website, transformed them from .glb to .stl. You can use them for making accessories or you can print them, but they won't fly ;) Have fun with your drone! Tutorial : https://vimeo.com/775340586
I just took the models from the official dji website, transformed them from .glb to .stl. You can use them for making accessories or you can print them, but they won't fly ;) Have fun with your drone! \^o^/ Tutorial :
Start your own drone delivery service and deliver cargo/payloads with your DJI Mini 2 , DJI Mini SE , or Mavic Mini ! Everything is fully 3D printable without supports, you just need some string or a wire. Both the mount and the landing…
A small and robust case for DJI MINI 2 , DJI MINI 2 SE and DJI MAVIC MINI . It's perfect for when you just want to pack your drone in your bag or backpack. It is lightweight and protects the drone from damage and scratches. To install the…
I just took the models from the official dji website, transformed them from .glb to .stl. You can use them for making accessories or you can print them, but they won't fly ;) Have fun with your drone :D Tutorial :
DEADPOOL SCOOTER - VESPA PRIMAVERA SCALE 1:12 If you want this as a multi piece thing you can get it here: https://cults3d.com/en/3d-model/game/deadpool-scooter-vespa-primavera If you have any questions, let me know in the comments. You…
This is a remix / minor mod of the excellent DJI Mini case design by rosscadguy, originally posted on Thingiverse: https://www.thingiverse.com/thing:4085056 I wanted to be able to print it without support or overhangs to keep a smooth…
A compact case to hold propellers for the DJI Mavic Air 2. The propellers slide onto rods printed in the base of the case, and the propeller tabs rest in recessed holes on the top and base of the case. Remember to always inspect your…
I created a trash can that uses the FITS pocket to mount on the back of the center console. There are two versions. A shorter, thicker walled one that is more flush with the top of the FITS pocket and a taller one that has thinner walls…
This is a kit I designed that converts the Nerf Maverick into a Talon magazine compatible flywheel blaster that I have dubbed the “Mayfly”. It was inspired by an illustration done by the visionary Hotkoin, which you can see here: /…
Adapter for mounting a tablet in the phone mount of the DJI Mavic air 2 controller. This design should fit most 10 inch tablets. Print instructions Model needs supports to be printed. works best oriented on its side for strength. printed…
This is a generic phone holder that goes into the cubby hole FITS slot adapter I intend for this to be used with my pixel 3/4 phones but you can modify the dimensions to fit your phone / case. I printed this on a Creality Ender 3 with…
Once I created my iphone dedicated sunshade I decided that it's time for universal one. So, this one is a three part print in two size options: normal - fits iphone X/XR/12/13/14 size phones (regular versions) MAX - is designed for big…
Tecla basada en los conmutadores de avionica.
This is just to make it more accessible. The model is kind of not super easy to find. Look for more info here -…
Another Mavic Air 2 sunshade V1: fit for Samsung galaxy S9, but should work for most. Your phone must be at least 55 mm width and do not exceed 160mm length. V2: fit for Samsung galaxy S21 ultra, but should work for most. Your phone must…
This drawer is designed to make use of that pointless cubby to the right of the Ford Maverick radio display. This fits snug in the cubby hold, making use of the ledge near the outside to hold it firmly in place. The drawer holder does not…
Found a great design for a trash bin that fits neatly in front of the console by tfutral51. Really is a perfect fit. Looking at the model, there were no internal fillets, so it was really thin in the corners. I was worried about it…
I have two drones that I currently don't use, just sitting there collecting dust and thought to myself, why not put them on a cool looking pedestal so I can place them on my shelf and show them off to my visitors :D Looked around Amazon…
Źródło oznaczyło ten model jako treść 18+.
Adapter for mounting a tablet in the phone mount of the DJI Mavic air 2 controller. This was designed to fit a Lenovo tab4 8 inch tablet, but might also fit 7 - 9 inch tablets. Print instructions Model needs supports to be printed. works…
This is an adapter designed to add a FITS slot to the cubby hole on the dash. I added a blank press fit plate to hide the space in the back and add some stiffness via press fitting against the walls. This is designed to be used with…
I wanted to separate the various junk I keep in my glovebox. I didn't find any dividers that would work for the Maverick, so I designed one. Since the glove box narrows slightly closer to the door, and that's a very difficult design, this…
This is a divider for the Ford Maverick rear under-seat compartment, it utilizes the Ford FITS integrated mounts. The design is comprised of two main parts, the divider and the FITS brackets. The brackets bolt on to the divider using…
This is a minifigure scale (ish?) Nerf gun I designed a while ago. A minifigure should be able to hold it by the handgrip as well as the spring pull-back part I don't know the name of. Print instructions I've printed most of mine in a…
Extension legs are useful when landing on grass. Print instructions Use supports ;)
Rim and drift tire for Maverick Strada RX 1:10 RC car. 12mm hex hub, 88mm in diameter , 31mm wide (62x29mm rim). I printed the rim in ABS and the tire in TPE (Fiberflex 30D), 10% gyroid infill. No glue needed, its a tight fit. If you make…
Thanks to @Nalihalle for the model for the Mavic 2 Pro. For the Air 2, I just scaled the model down to 90%, and extended the bottom parts to grab around the booms a little better. Printed in ABS but PETG should be fine too. PLA might not…
DJI Mavic 2 Kit Card Drone UAV, print it, tear out and build yourself a drone! :-) If you appreciate my work please consider donating me on Ko-fi .
Mavic Mini Phone Holder with Lanyard Clips I remixed the phone holder from YohannG from scratch to suit my needs. Changes included: Added notches made specifically for the Mavic Mini controller Designed for very minimal support needed…
A DJI's Mavic air 2 remote neck strap holder
A simple low-profile Guard/Lock for your Mavic 2 Controller. A much needed accessory since I already scratched my display, still can't find what scratched it. Only my Mavic was next to it... Well, not a problem anymore! You can add some…
Taken from DJI original website Model of the new DJI mavic air 3. Unfolded and folded. All images are from DJI as well Link; DJI Air 3 - Double Up - DJI Please note; Visual model only, size is as accurate as possible but can differ…
My Quadlock casing for iPhone is too fat for DJI Mavic Air 2 remote to hold. So I made an adapter - a plate with Quadlock adapther that hold my phone. My first project with Fusion 360 and first print of something that I designed by myself.
Originally found from: https://www.thingiverse.com/thing:5393377/files I remixed this design to include a hole to drop items in the rest of the console beneath, without lifting the tray.
Simple trash bag holder for FITS integration. Files print as oriented with no support, best to print in PETG, ABS, or similar temp-resistant plastic. Feed a bag through the hole, pull the mouth around the ring, and secure it with the…
Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0.2mm Infill: 25% Filament: Generic PLA Grey Notes: Honeycomb infill 40mm/s 2 perimeters 3 top and bottom layers
Stylish stand for DJI Mavic Air. Show of your drone in midfly like position...
This is my version of an dronestand, perfectly fitted for the DJI Mavic Air. It's made of two parts, which are stackable to make the printing easier. Hope you like it, would be glad to see some print results from others! Please share if…
Mobile Phone Mounts for use with the DJI Mavic 2 Remote Controller (and all similar DJI controllers for Air/Mini etc). The mounts allow for the immediate use of mobiles without having to remove the phones case. Originally designed for the…
A tool needed to remove the rivets to replace the gimbal arm pieces. Sold on Alixpress (https://it.aliexpress.com/item/1005004380252138.html) at 80$, i decided to recreate it by myself (hopefully you'll need it just once). Must be printed…
This drawer is designed to make use of that pointless cubby to the right of the Ford Maverick radio display. This fits snug in the cubby hold, making use of the ledge near the outside to hold it firmly in place. The drawer holder does not…
I found the gap in the original design unnecessary as it just makes the great design less stable. I also made it 1mm longer so it fits better in place without vibrating. Finally I fixed the mesh and changed orientation. Since I dont have…
There are plenty of hitch covers around, but nothing that fit and was plain. This is as simple as it gets.
Range extender for DJI Mavic drones. Designed for the Mavic Mini controller but I believe most DJI drones have the same antenna design so it should work on most. I used reflective foil tape as a backing. The antenna grip must be printed…
Gridfninty holder for a generic silicone handle deburring tool commonly found on Amazon.
This is a remixed part from Thingiverse, I looked for the original creator on here but I couldn't find him. The link to his original part where he shares the original step file is below. https://www.thingiverse.com/thing:4410561 His…
This is a Maverick N-Strike Barrel Attachment Muzzle, which, once installed, allows N-Strike Style barrels to be attached to the Maverick. It replaces the existing muzzle, which can be removed after the blaster is taken apart. This muzzle…
I made a sunshade for my new DJI Mini 2 remote. It clips onto the rails of the phone holder and the top slips down over the top bracket. It's fairly secure though is does wobble a little since the sides are free-floating. Made to fit by…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I wasn't happy with the other outlet cover designs available, so ended up designing one myself. The latching mechanism should be flexible enough without snapping, and on my Maverick, it produces a tight fit (after a dozen iterations).…
Hi there, my version of a battery cover for the batteries of a Mavic Air 2. Although it is very small, it has edges to make it remove easily. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2…
A sturdy shade and a gimbal protector for the Mavic Pro. Couldn't find one that fits well and I kept loosing them in high wind. After inserting the hooks in the front, push with both thumbs from the back forward and down to lock in place.…
This is a remix from Thingiverse: https://www.thingiverse.com/thing:5023147 Works perfectly for my M2EA. Note you will need to attach the top backward from the original design. I used some 5 min epoxy for a strong hold. I know my print…
This is a heavy duty cup holder expander made to fit standard 16oz tall cans (~66.5mm), 12oz tall cans (~57.5mm), and larger hydroflask style water containers (88.5-90mm). There is about 0.5mm clearance on either side. I printed this at…
This is an extender that you slide over the vent under the front seats to help redirect the air to the back seat with a 30 degree angle. I printed with NO SUPPORTS - standing straight up on the bed with a BRIM to help hold it. My Maverick…
Based off the design by Kl0ck, but remade with the official CAD geometry provided by Ford for a better fit in the mount. Also features slightly bigger openings with better angles to fit large Yeti-style tumblers. Print upside down, no…
TOP GUN MAVERICK LOGO Change Thickness to 3mm 1st layer 1.25mm 2th layer 2mm 3th layer 3mm Enjoy
This model is a remixed version of tailgate covers for a Ford Maverick. I added vent openings to allow any trapped water to drain or evaporate.
3.8mm and 4.0mm thick SRAM Maven brake caliper block to aid in the piston massage process. Details of the piston massage process can be found on the SRAM Mineral Oil MTB Disc Brake Installation, Hose Shortening, and Bleed Manual ("Disc…
Simple parabolic signal booster. Stick any aluminum foil inside. Print instructions Print it with a 5mm brim, left or right side down. You need two pieces.
This is remix of the low profile cupholder done by RedBaron97. I added a 3M cable grabber onto the flat section I added between the cupholder holes so I could route a cable for charging an android tablet / phone on the road. I printed…
This is a blank plug designed to fit into and fill a 2022 Ford Maverick FITS Slot. I had some fitment problems on the sides of my FITS slots so the dimensions have been slightly modified and I added "Ford" text to the front of the model.…
This is a pair of seat hooks to hold bags (obviously) and a bar with a FITS slot on it. I printed this on a Creality Ender 3 with eSUN PETG using the following settings: Print Temperature: 245 Plate Temperature (Initial Layer): 80 Plate…
*I made a customizable version of this if one of the pre-made one is not the right size. Check it out here: https://makerworld.com/en/models/480005#profileId-391473 Just a simple adapter to fit larger water bottles in the Ford Maverick…
Use a M5 allen bolt and nut for the shoulder support. You can add a soft bottom protector (optional) printed in TPU with the following ORCA parameters: Wall loop = 1, Top and bottom shell layer = 0.Infill Giroide 20% and glue it whit…
Nice and simple print. Slide the lid (the part with the logo) into the main box, and there you go – a nice and sturdy protective transportation box for your DJI Mavic Pro . UPDATED Jan 8th: Slightly larger to give more wiggler room inside…
Mavic Mini Wing Holder Clips Was a little tiring having the wings flop all over the place and having to align them to get them in the case. Made these simple clips to hold the bottom and top wings. Fits snuggly on the Mini and without a…
DJI Mavic Mini 3D Laser scanned with a Creaform Handyscan 700 (0.2 mm res) Missing Motors/Props/Camera. Using this model to create accessories (GoPro saddle, payloads etc). Screw holes, joints and cables were filled Motor mount angles…
The original Mavic Mini Controller does not fit my new iPhone Pro Max so I designed this very simple print to fix the problem! It's custom made to suit a phone with a standard Apple silicone cover, but it does work happily with slightly…
A handy storage box that fits inside the battery charger of the DJI Mavic Mini fly more combo. It is not my design, but a remix of: https://www.thingiverse.com/thing:4169444 I tried to remix on thingiverse, but I failed due to the…
A tool to release the Battery out of your Drone Print instructions Have fun with it...it works well ;)
I was inspired by RexiLabs on MakerWorld who is designing all sorts of 3D printed scale missiles but hasn't made a Maverick yet. This is a 1:10 scale recreation of the AGM-65 I designed based on images I found online. The 3mf file…
This is a Slide Replacement and Stock Attachment Point for the Nerf Maverick. It uses the 3 small screws as well as the N-Strike Attachment nub and spring from the stock slide of the Nerf Maverick. It features a N-Strike compatible rail…
The Ford Maverick bed storage cubby is really handy for storing bungees, tie-downs, and other gear. However, I found trying to jam everything in and closing the lid without items spilling out a bit annoying. I designed this storage bin to…
Got it in my head that I would start printing some accessories for the truck and I happened across rcs128's console divider design. Great way to break down that space. I was worried about long-term durability, so I thickened the plates,…
Remix of a remix.. :) I made this version a few millimeters smaller so that it will sit deeper in the console.
Inspired by the antenna booster from leenanj , I created my own one and added a feature that all Mavic users really love: Having it foldable :-) So I designed the Booster from scratch and ended up in having two parts, that will be screwed…
Center console divider to help organize the the space.
My friend let me borrow his DJI Mavic Pro for a while, warning me that the previous borrower had crashed it. That crash mean the front left landing leg was snapped off, leaving the antenna exposed. This piece is as close to the original…
The rubber casing of the original key was braking by the keyring hole. Inspired by Dontown 's : https://www.printables.com/model/39576-vespa-key-repair Had to remodel ex-Novo for a larger and different type of key. Added a lip on the…
This is a remake of GurtKnev's 8" tablet holder that is a little narrower to better fit my case. YOU MUST USE SUPPORTS I ignored supports in my first print by accident, but the piece was designed so well that it still worked fine, even…
Hi there, just another "Stick Guard" for the Controller of the new Mavic Air 2. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0,2 Infill: 15 % Filament: extrudr PETG neonorange Category: Camera
Is possible to print it from PLA, but it will be necessary to edit the clips. Models for editing are here https://cad.onshape.com/documents/9ff4f436e9f0f95ade5edbb7/w/4dd14fb610b8b741958bca6e/e/14f7be1add8f6e29795f7286 Print instructions…
Make your own Vespa A detailed 1:6 scale model of the Vespa Primavera scooter. The model includes a functional stand, small, medium, and large windshields, standard rear handles, a rear folding rack, and a functional top case. Print…
A cover for the DJI Mavic Mini joysticks so they can stay on the controller while it's in the Fly More case. I saw 2 other designs, but they seemed like they could let the sticks slide/wiggle around in the case, I designed a cover that…
