26 429 modeli
IMPORTANT NOTE: 3D-printed plastic screws will break. Because of the way a 3d printer works, and the way the screws are typically oriented during printing, they are very weak. Things like printing in PETG, adding more perimeters, and…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Lately, I’ve been experimenting with emergency whistles. Here’s my first attempt let me know what you think or what I could improve!
Wydruk około 0,49 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Rock-Solid and lightweight emergency whistle. Two chamber design. Painful loud. Print Settings Printer: Anycubic I3 Mega Rafts: No Supports: No Resolution: 0.2 mm Infill: 20% Notes: Print on its side (as it is in the stl-file) without…
Wydruk około 0,47 €–0,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PLEASE UPDATE YOUR FILES to ensure the best fit. ( updated 1/10/23 ) Stronger Handle and simpler labeling for less mistakes. 49 hours too much? Try 60% version→…
Wydruk około 4,43 €–5,41 € nettoWstępna wycena jednego wariantu
[Update] ---2023/05/10--- Version 2 with stronger joints has been added. ---2023/05/26--- New Type released!! https://www.thingiverse.com/thing:6046050 ---2023/09/25--- Fixed a defect in version 3 where the joints of the tail and tail fin…
Wydruk około 2,38 €–2,90 € nettoWstępna wycena jednego wariantu
To help organize my cord drawer I designed these cord wraps(Cable Tamers) in two sizes. Wanted to share here if you could use the design. How to use: Place one end of the cable into one of the smaller cut outs on the side. Wrap the cord…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
Simple sliding cover for your laptop camera. Use thin double-sided tape to attach.
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
November 3, 2026 Added a main cabin without hatch (RED folder) June 18, 2024 Added a main cabin that is open at the back and a step file of the section in order to allow for an easier design of a double cabin. The added part should be…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
A parametric car/motorcycle license plate key chain designed to be printed on single filament printers with color change. Add a filament change in your slicer and swap the filament mid print in order to achieve a two color print. Features…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
In this final version, I’ve incorporated all the feedback and suggestions. The whistle is now even easier to print thanks to improvements in the internal structure. With thicker walls and an optimized design, it’s also louder than before.…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
No supports needed. I included a PDF drawing to see exact dimensions. For strength I suggest using at least 3 perimeters. 5/17/25: Version 3 Rotated model for correct print orientation. Added updated drawings. 5/17/25: Version 3 Added…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Marge and Homer Simpson
Wydruk około 13,28 €–16,23 € nettoWstępna wycena jednego wariantu
A simple but very sturdy wall mount for a FS91 and FS31 trimmer. It may fit other models as well with the same injection molded part around the upper driveshaft. I modeled this around my specific machine and you may need to scale it up to…
Wydruk około 9,25 €–11,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Emerging Creepy Hand. Real Multipurpose this one: it can be bloody, irradiated, frozen. I will put this in the free area. I can see it being made into many things. Looks like it could hold a cell phone as is.
Wydruk około 13,92 €–17,01 € nettoWstępna wycena jednego wariantu
MODEL DETAILS This is a print-in-place, torture test for your 3D Printer, that works as a fidget toy. If you liked this model, why not try out our other stress tests too? You can find out all about Revo Hemera XS here! RECOMMENDED PRINT…
Wydruk około 3,14 €–3,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors Shelly box for inline flex wire and Wago 221 connectors (this one) Shelly box for 2x flex wires…
Wydruk około 3,55 €–4,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
🌊 🐠 Welcome Under the Sea! 🧜 🔱 You have the honor of visiting King Triton's Palace Under the Sea!! A majestic building of towering spires and impossible arches awaits your gilled friends. Dive in to learn about the features of this…
Wydruk około 4,17 €–5,10 € nettoWstępna wycena jednego wariantu
Decorated with a logo seat belt clip. I recommend using it to deactivate the weight sensor. When carrying luggage on the seat or for decoration. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm.…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I uploaded a video where I show the design and assembly process. I tried making the camera as simple as possible, but some parts might be difficult to get. The ratchet wrench components used for the film advance mechanism are totally…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Here is the File for my Vase Mode print "MESMER" I suggest printing it is something Shiny or Glittery for best effect. Green photo by me. Vertigo Starlight photos by Chris Russell - @Crussty on the Twitters I hope you Enjoy. If you like…
Wydruk około 1,78 €–2,17 € nettoWstępna wycena jednego wariantu
Print with supports on build plate at 0.2mm. Increase infill density and/or perimeter count and/or material used to suit your strength needs. When you try to insert the ¼" screw, you'll need to penetrate the one-layer thick “threading”…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wall art - Gamer logo
Wydruk około 1,69 €–2,06 € nettoWstępna wycena jednego wariantu
This is a mini cute version of Thor Hammer (Mjolnir). It fit in 4.5 x 3 x 9 cm. No support needed. If the scale fit your needs, use the gcode file, I selected lightning pattern to get a faster print. It can be upscaled easily to life size…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
This is a remix, but is not in printables, its in https://www.thingiverse.com/thing:1722395 Connector were added to connect the wings, and the head was modified to have a more easy entry. Made on an Artillery Hornet. Layerhight 0.2 and…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Due to the rapid changes happening to this device, please look at our github repository for current information, assembly and user instructions. Also see this medium piece for more information on what we've done and why.
Wydruk około 3,41 €–4,16 € nettoWstępna wycena jednego wariantu
A mount to use your iOS 16 MagSafe equipped iPhone as a Continuity Camera for an iMac Pro. See https://www.theverge.com/2022/6/7/23158510 for more information. Link to original .shapr source file.…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
🤨 Update 3/1: WE GOT THE GRAY TROPHY LET'S GOOOOOOO (seriously somehow I've had a lot more trouble getting one of the gray ones than the gold one) Update 2/16: v2 has been added! This one is a little more stable. Also, now I have a…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Bobble the head of your favorite leader of the heroic Autobots! I wasn't able to find the source for the head model I used for this bobblehead. I found similar ones, but not this exact one. If you find it, please let me know. All I did…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena jednego wariantu
The mounting of this bracket is achieved by clip-fastening! The development of this camera mount was inspired by various mounts that can be found on Thingiverse. As it is, none of them was exactly what I had in mind. That's why I decided…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
For the articulated arm that holds the RaspberryPi camera on my Prusa Mini, I needed a way to fine adjust the viewing angle of the camera. So I opted to design a ball joint. I did a number of prototypes to try out how much the socket…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Whenever I got promotional cards, business cards, or even just a useless deck of cards lying around, I would always turn them into tiny boomerangs. But the problem I always had was always how quickly they would deform after a few throws,…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Updated the hole size and made the back feet more firm. Also named all components in the .3mf file to make things easier. This is the kind of toy I would fidget with when I was a kid. A little Transformers Micro-cassette. While it does…
Wydruk około 5,36 €–6,55 € nettoWstępna wycena jednego wariantu
All-in-one Repair Kit for a Broken Flush Mechanism. Straight and Angled Levers included. American Standard. No Supports! Higher Infill on Lever Arm Recommended. Assembly Order: Bolt (Cut-out towards the Chain) Nut (Counterclockwise…
Wydruk około 1,92 €–2,35 € nettoWstępna wycena jednego wariantu
Homer Budha .3mf Ready to Print by TIXEN FDM - with variable layer height and supports Sizes : 10cm Please, Print it! Share it! and let me know about any suggestion or any issues Contact info: Email: [email protected] IG: @tixen.ar This…
Wydruk około 5,19 €–6,35 € nettoWstępna wycena jednego wariantu
no special print features I just printed it on 0.3 and draft. ONLEY WORKS ON ELMERS 7g GLUE STICKS, look at 2nd image for more info.
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Having a 3D printer without a camera is like driving at night without lights. I decided to create a base that doesn't require any alteration to the MK4 and can also serve as a starting point for others to create their own camera support.…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Boomerang for left and right handers … still improving the flight characteristics V1: 2023-03-02: V2 added
Wydruk około 4,34 €–5,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was inspired by these models of The Simpson Family. However, I did not like the image of Homer and found there was no good way to mount them. So I created something from scratch. My model of Homer is 7mm deep and has built in hook…
Wydruk około 4,18 €–5,10 € nettoWstępna wycena jednego wariantu
Enclosure for raspberry pi zero with HQ camera (flex cable inside). Feel free to adapt the model to your needs. The image quality of the camera is beautiful, and I'm happy with the result. I found a project called ShowMeWebcam, which…
Wydruk około 1,93 €–2,35 € nettoWstępna wycena jednego wariantu
Replacement adjustable beard comb for some Philips HC and BT models. Recambio peine ajustable para barba compatible con algunos modelos Philips HC y BT.
Wydruk około 1,52 €–1,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made a wall mount for Tapo C210 WiFi camera. It should work with other Tapo cameras because I think they have the same mount. Made it in 4 parts for easy printing. Easy to put together, glue recommended. There are holes for screws on…
Wydruk około 7,46 €–9,12 € nettoWstępna wycena jednego wariantu
Both pieces need supports . It should take less than an hour and a half in total. For the settings keep reading, for the story skip down below. The assemble it make sure all supports are cleared and slide the end without the ridges under…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
If you have a camera capable of taking 220 roll film you can use it to expose a full roll of 35mm film using the adaptors in this print. I've tried other 3D-printed adaptors but none worked in my Hasselblad A24 magazines, which is why I…
Wydruk około 1,56 €–1,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an adapter to use cheap zip ties as trimmer blade. It was made for a "Güde Rasentrimmer 250/18 RT Set", but this kind of blades is also used from other trimmer brands like Bosch. If this thing works for you, pleas leave a commend…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
I made this credit-card size cuff link card for the Prusa Fashion Contest. Ever had one of those moments where your shirt needs cuff links, but you packed in a rush and you left them at home? This print is designed to solve that problem,…
Wydruk około 1,11 €–1,35 € nettoWstępna wycena jednego wariantu
Assembling: Put the bottom grid into the skimmer basket tube. There are 4 latches at the end of the tube. Material: PETG Nozzle: 0.4 Layers: 0.3 mm Infill: 50 % Skimmer basket tube: Skirt height: 20 layers Loops: 2 Brim: inside and…
Wydruk około 0,97 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The new continuity mode for iOS and MacOS allows anyone to turn their iPhone into a webcam. The problem is not everyone has an Apple Studio Display or another specific display. The same goes for iPhone models and phones with cases. The…
Wydruk około 1,12 €–1,37 € nettoWstępna wycena jednego wariantu
Logitech C270 mount for KOBRA 2 PRO/PLUS/MAX Updating Kobra 2 pro/plus/max to versions above 3.0.5 , it is possible to connect a USB camera and watch the printing process using Anycubic app . I found my old camera and created a mount for…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Egg size: height 60 mm, diameter 46.55 mm The egg is printed from two halves connected by a connecting pin. Use white filament color to mimic real egg. A feedback, comment or like is always welcome! Share with me how this product helps…
Wydruk około 3,39 €–4,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here is my iPhone Monitor Mount, the perfect solution for using your iPhone as a webcam during Zoom and other FaceTime calls. This mount is designed to work with a Viewsonic monitor and may work with a variety of other monitors. This…
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
I wanted to try out the new Continuity Camera feature with the iOS 16 and macOS Ventura betas, so I made my own mount! This was designed around the 2021 14" MacBook Pro and the Apple Studio Display, but might fit other MacBooks and…
Wydruk około 0,96 €–1,18 € nettoWstępna wycena jednego wariantu
This is a very simple box for the new Raspberry Pi HQ camera module as I wasn't comfortable having a bare PCB flapping around. To install the module carefully remove the rear focus adjustment ring. Screw the module down into the case with…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Die montage an der rechten seite der X-Achse führt zu einem guten blick auf die Düse. Mounting on the right side of the X-axis results in a good view on the nozzle.
Wydruk około 1,25 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Seltener Fang (Rare Catch) by Ernst Herter Bildhauerei in Berlin Fixed Scan.
Wydruk około 8,62 €–10,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hi i designed an Aquarium Skimmer cause i think that cost of two pipes in shops is a "little bit" to high. I'm using it to my Fluval 207 it fits to original hose.
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
Hello, Welcome to my profile, full of models and miniatures :-) I have Homer Simpson for you. Very cool characters. It is suitable for coloring. My children absolutely love it :-). Important: If the character does not stand and somehow…
Wydruk około 3,15 €–3,85 € nettoWstępna wycena jednego wariantu
5 x 5 cm y un solo color , con altura 5mm Tiene dos alturas con las que se puede hacer un cambio de color (fondo y frontal). 27.08.2023 Hay un nuevo diseño con una anilla para utilizar de colgante o llavero With two highs, you can make a…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
These emoji tokens use special gcode and dont use much filament. Enjoy. A single extruder is used to make an embedded, multi-color design that exists only on one layer of filament. Update: turns out I didn't merge the kiss emoji…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena jednego wariantu
ASA or PETG 0.15 Layer No Support, no Brim needed 100% infill
Wydruk około 0,10 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Wydruk około 1,36 €–1,67 € nettoWstępna wycena jednego wariantu
Do you need a small spoon for a trip? Something you can throw away? This is the thing for you. A one-time use spoon to be thrown away. Perfect if you forgot to pick up some single-use spoons for a trip and needs something to pick up the…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Skimmer basket replacement should be printed in a material that is compatible with the chlorine or salt water in the pool. I set the slicer to print with extra perims and lots of top and bottom layers to ensure that the filter basket…
Wydruk około 11,70 €–14,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An easy and simple summer pot inspired by the structure of sea foam. Printing settings: Vase mode - 2 or 3 layers Filament - Fiberology Easy PLA Light gray
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
This is a remix of samlovecroc's “Non-MagSafe iPhone Holder for Continuity Camera” that will support the MacBook Pro's screen depth and larger iPhones including those with cases on. The form of samlovecroc's design is preserved the…
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
All the assembly is press fit. Print on given orientation, no need of supports. I recommend to use additional perimeters (e.g. 4) on the clamp piece, to increase stiffnes. PETG material recommended use, but not essential. 160 FOV CAM: 65…
Wydruk około 2,75 €–3,36 € nettoWstępna wycena jednego wariantu
Mülleimer mit Klappdeckel Größe: Durchmesser 10cm Höhe 21cm
Wydruk około 2,94 €–3,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Easy to scale in the slicer software
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
I felt that the chlorine pucks I put into the skimmer maybe disrupted the water flow so I designed this to be able to put the pucks on the side and still ensure a good flow. Should fit most standard skimmers, the measurements are: Height…
Wydruk około 18,32 €–22,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Piggy bank inspired by Thor's hammer. To save and be able to buy 3d machines :). It is printed in pieces, only in the bodysuit supports are recommended since in the others it is not necessary. To enjoy
Wydruk około 6,54 €–8,00 € nettoWstępna wycena jednego wariantu
This is an Update to the Generic Camera Arm for SV06 & SV06+. To Date it is my most popular viewed and download model. So now I'm revising it. It now Includes a Small Lip on the block to prevent arm form twisting. The single screw…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
https://www.buymeacoffee.com/maxt ---------------------- This model goes well with another way to decorate the napkins - Christmas Napkin Ring Set, 8 different pieces Usage: Place it on a maroon napkin for your festive Christmas table…
Wydruk około 2,10 €–2,57 € nettoWstępna wycena jednego wariantu
Dieser Flexi-Hummer ist ein gelenkiges Print-in-Place-Modell, das KEINE Stützen und keine Montage benötigt und sich hervorragend mit PLA drucken lässt.
Wydruk około 2,42 €–2,96 € nettoWstępna wycena jednego wariantu
Another edit of a Disney infinity fanart model on SketchFab by JohnLogostini . This is my printable version of it, with a lot of detail in the model itself, instead of maps. Printed at 10cm high on my mk3s+ I added a photo of that print,…
Wydruk około 5,15 €–6,29 € nettoWstępna wycena jednego wariantu
Bobble the head of your favorite treacherous Air Commander of the evil Decepticons! Get the rest of the needed parts (spring and base) from the linked original Bobblehead models, or use my 3MF file, or print the provided gcode appropriate…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
Transformers coasters! Also work as display stands for your figures. Just change filament color above 2mm.
Wydruk około 1,42 €–1,74 € nettoWstępna wycena jednego wariantu
This ist a remix of GP Studio's “Cable Tamers” – updated with some improvements. The ends were shortened as they often stood in way when winding up a cable. Also some material was removed for faster printing and less filament usage.…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
Update: I have changed the CC license of my models because of the lack of clarity around AI use. If you want to re-mix, reuse, rewhatever my model, just ask.. I have been working on some skiffs for a silt sea adventure that my players are…
Wydruk około 8,31 €–10,16 € nettoWstępna wycena jednego wariantu
This is an adaptation of the camera back from the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 , inspired by and simplified from the Raspberry Pi Hi Quality Camera Case Adapter . I've adjusted the back plate of the…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
I liked the mounting system created by Sneaks. But it did not fit my Raspberry HQ camera. i made this case to fit on the arm with the same ball system as the original case. I printed it in PETG. Its made to be a tighth fit with the…
Wydruk około 2,09 €–2,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Soporte Celular diseñado sobre la imagen de Homero Simpson.
Wydruk około 1,78 €–2,17 € nettoWstępna wycena jednego wariantu
I recommend printing perpendicular to the printing plate, it will preserve more details and the layers are not so visible, at a low layer the time is longer, but the details are more beautiful. So far, the print with Pla Prusament silver…
Wydruk około 9,84 €–12,02 € nettoWstępna wycena jednego wariantu
Fun dangling flip flop earrings with a multi-color print utilizing filament changes. Excited to see what color combinations you choose! Size up or down but watch the size of the post hole. We included the gcode for a set. But feel free to…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu
I've built an enclosure with an Ikea Lack. Recently I've baught a Raspberry Camera High Quality(the one with interchangeable lens. I created a mount, which can pivot in 2 directions. I've printed it without support. It requires: 1x m3…
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
Original file located at: https://www.toymakr3d.com/product/12-jet-squad I wanted to print up the mod, noticed there were missing mirrored objects, colors weren't sorted into proper folders for new (aka the white should really be a light…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
Bobble the head of your favorite Decepticon Military Operations Commander! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with…
Wydruk około 1,58 €–1,94 € nettoWstępna wycena jednego wariantu
The argent eye was my first attempt at creating a 3D printable camera back in February 2020 and has been somewhat obscured by the fact that I kept it on Github. Despite being my first camera, it is capable of taking most, if not all the…
Wydruk około 7,92 €–9,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Plastic hammer holder Ø 42 mm Holder for Ikea Skadis
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
There is not much to say. I believe that the photos are self explanatory I printed with PETG but PLA would work too My son is named Felix. Please replace the name by yours or anything else as needed
Wydruk około 14,61 €–17,86 € nettoWstępna wycena jednego wariantu
The purpose of this protector is to protect the lenses of the cameras from scratches and shocks by creating a protrusion for the camera section of the phone. Printer configuration: 3D Printer: Elegoo Neptune 3 Pro Filament: eSUN PETG…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a holder for 4 hickory drumsticks of size 5A (which is my favourite size), but it can also hold slightly thicker drumsticks for example 3A. And because I usually forget my drumkey, I included an emergency key. As it is a plastic…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a Case to fix the emergency button to a Simrig. The hole distance on the back is 40mm to fix it horizontal and vertical on 40XX aluminium profiles. You will need 2x t-nut for M6 Screw 2x M6 Screw 4x M3 Bass insert 4x M3 Screw If…
Wydruk około 6,35 €–7,76 € nettoWstępna wycena jednego wariantu
Stan Smith From American Dad.
Wydruk około 7,94 €–9,71 € nettoWstępna wycena jednego wariantu
Some time ago I built a radio with a microcontroller and an FM-IC. I used an ordinary single-turn potentiometer to tune the frequency, but this did not work as intended. It was really difficult to tune in a specific frequency since the…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Clip for a pool skimmer net. It's usefull for fastening a pool skimmer net into a pole. But could be usefull also for other appliances… EDIT: added parametrized version… you can change any length, diameter parameter in Fusion 360 “Change…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Please click if you appreciate my work :) Biturbo. V12. Wall-mounted dominance. This 3D printable model of the Mercedes-Benz SL65 AMG (R230) transforms the muscular German luxury roadster into a sleek wall-mounted sculpture. The iconic…
Wydruk około 13,06 €–15,96 € nettoWstępna wycena jednego wariantu
A simple remix to add the ball mount to the back of a PRI Night Vision Camera Mount. Print instructions Print with supports on build plate only.
Wydruk około 1,72 €–2,10 € nettoWstępna wycena jednego wariantu
In this model we have the top 5 car brands sold in portugal. This design is just wall art althought it can be used for other purposes. Download your car logo and stun everyone with your 3D print! More car brands will come in the next…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena jednego wariantu
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Wydruk około 19,18 €–23,44 € nettoWstępna wycena jednego wariantu
Combined and designed this setup from the best ideas and designs I could find (in my humble opinion of course) Features: Single piece backplate. No loss in build volume. Nozzle in original position. Cable routing thru backplate for nice…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
