33 modeli
One of my cat instantly scarfs down her food and then tries to steal from other. Surefeed already sell a backpiece to help prevent stealing from the back, but nothing to stop the thief from pushing in from the front when the other is…
This helps stop other cats from stealing food. The size is for average, non-overweight cats. Although a small chonker would probably also fit!
I drafted this from scratch to meet the requirements of fitting in the space the original did and working the same way it did. The axle should be folded along the single layer hinge then inserted into the smaller, tapered, hole such that…
Essentially the same as the original design but with reinforced clips/guides
A friend of mine has a particularly picky cat that needed a raised bowl without sharp corners that “trap” food. I know what you're thinking, “classic cat”, am I right? Anyway, I am always happy to help. There was already a design on…
This isn't a big change, and the original probably works fine. It's just that I was bothered by those snap-fit legs because the bending load is concentrated at the base. This is the worst possible location for a bending load when a…
I needed to fit a catflap into my workshop and didnt want to spen a ton of cash on SureFlap tunnel extender. I printed this with 10 walls just to make sure it would be watertight and 50% infill. I printed it useing PETG to allow it to…
Tappet lift arm remixed to utilise a steel dowel, Diameter 3mm, length 8mm (min 6mm). Have had these feeders break both on the tappet and also the cam - they seem very weak for the duty they perform. Modelled the Original Cam and a…
I liked the design of the cat cutout version from @MaikaRose_777491 for my heftier cats, but needed more reinforced clips because the top clips kept breaking off when I tried to connect it to my feeders. I combined the shape of Maika's…
Purrmission Feeder - a microchip cat feeder that opens (gives permission) only to the registered cat. No more greedy siblings stealing your cat's food! Introduction The Purrmission Feeder is the answer to the age-old problem. You have a…
Cut the frame so I could print 1/2 at a time with a top clip on each half to accommodate printers with smaller areas. Use the Mirror setting on your slicer to print the other half. Did not require scaffolding when I printed it. Thank you…
Works well for my kitties. You'll want to print 2 copies, then it attaches by: Adding VHB tape to each piece Adding CA glue to the insides of each piece Attaching them in place; hold them a bit until the CA glue sets Extra hungry kitties…
This is a low quality model of the MPLAB-SNAP (MicroChip PG164100) debugger. I made it because I 3D print “debugging platforms” for my projects which hold my boards, cables, debuggers, etc.. MPLAB-SNAP is a little weird because of the…
The two STL files are similar but the top clip is updated on the second to add a more secure fit
This 3D case is designed to securely house the Microchip Snap PG164100 Programmer. It ensures protection against physical damage while maintaining full functionality and easy access to all ports and connectors.
This is a simple name tag for the Sure Petcare SureFeed Microchip Pet Feeder. I have 2 cats with each their own, and I kept confusing the bowls. This name tag works even if you're using the back cover on your bowl. I've printed them in…
Got tired of having to change batteries every 6 months so got battery eliminators for my microchip pet feeders. However now a cable needed to come out of the cover, so designed a 3d print of the battery cover with a hole in it. Also…
This is a spacer for a Petsafe microchip cat door (model PPA19-16145) to allow a more polished looking installation in materials that are thinner than a standard door. Not very much structure is required, but a full width version is also…
Accidentally broke the lever mechanism for the Sure Petcare -SureFlap - SureFeed - Microchip Pet RFID Feeder This part is for the mechanism that rotates the cylindrical section that the clear door flap is connected to. Should be a drop in…
Replacement Battery Cover for: Surefeed Sealed Pet Bowl (Model: SPB) and Surefeed Microchip Pet Feeder (Model: MPF001) Designed to be printed on a FDM-Printer. (I will add more pictures ASAP)
My cat is orange, and he was too scared and unsure of the door movement with my SurePet Microchip Feeder. The training mode moved the door too much for his liking, so I spent months trying to get him to eat from it to no avail. So I…
Once combined you will now be able to use the Petlibro air feeder with the surefeed microchip feeder to keep kitties from eating each other's food. 5 total print files (Top, Middle, Bottom, Slide, and the lid to accommodate the larger…
This base is for the Microchip product Curiosity Nano Explorer EV58G97A that suits various development boards made by Microchip. I'm using it with an AVR64DU32, there are a lot of different kinds available. This base protects the bottom…
ICSP Clamp for microchip programming
Once combined you will now be able to use the Petlibro air feeder with the surefeed microchip feeder to keep kitties from eating each other's food. 5 total print files (Top, Middle, Bottom, Slide, and the lid to accommodate the larger…
This is a 3D model of Google's Wilow quantum microchip.
Simple mini case for Microchip MPLABXpress Evaluation Board: https://www.microchip.com/mplab/mplab-xpress I don't want to have "smoke signals" from board because of tweezers laying behind the board on my desk :-) Print Settings Printer:…
I have added battery replacers for my SurePet Connect cat doors. As a result I need a door with a hole in it, hence this part. It can be easily mirrored in the slicer to place the cord where it needs to be for your specific setup.
A lightweight 3D-printable pendant designed to attach to a cat collar , created to safely house an identification RFID microchip with a maximum size of: 2 mm diameter 17 mm length The pendant protects the microchip from impact, dirt and…
I couldn't find a fitting frame for the Cat Mate Elite Microchip Cat Flap which would cover the cut-out we have from the old cat-flap. The frame for the 360W does not fit either, so I designed a new one from scratch. It works and we use…
The Sureflap cat door uses 4 AA batteries that don't last very long; this design uses D-size cells that last months (5 or more) instead of AA cells that last about 3 weeks. You can't use rechargeable batteries in the Cat flap door they…
This model is a case for microchip pro micro with button used to be a keyboard works well just don't foget this model uses magnets in prusa slicer find where the space for magnets and have fun
Got tired of having to change batteries every 6 months so got battery eliminators for my microchip pet feeders. However now a cable needed to come out of the cover, so designed a 3d print of the battery cover with a hole in it. Also…
