135 modeli
This is part one of my SCI FY Train. No pilot necessary, completely run by AI automatum. Perfect for your wargame or SCI FY boards, layouts, etc. The connection between the maglev vehicles would be electromechanical, so no hard connection…
Wydruk około 8,74 €–10,68 € nettoWstępna wycena jednego wariantu
This is a 3D model of the supports of the iconic Lego Monorail This model is was originally exported from Studio 2.0 and converted and scaled, however the model was not watertight and kind of problematic so I remade them all in fusion. I…
A Monorail motor costs 50$, so I decided to design a Monorail motor adapter for normal lego motor. This adapter uses one ball bearing with the diameter of 9mm, 3mm high and a hole of 5mm. You also need 2 metal axles with the measurements…
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
This is my remake of the classic auto-switching lego monorail switches with some useful additions like Y-switches. required non printable parts per switch: 6x or 7x m3x6 flathead bolt (6x for the Y switch, 7x for Left or Right) Aliexpress…
Using this gear you can build a custom Lego Monorail motor sparing you from buying a used motor for 40$ I recommend really slow printing for even teeth of the gear (25 % speed)
This model is no longer for sale. Disney had one similar but discontinued it. My wife had to have it, so I designed this in Fusion 360, then printed it on my 3D printer and some of the larger parts were cut from ¼ basswood using my laser…
This is part two of my SCI FY Train. No pilot necessary, completely run by AI automatum. Perfect for your wargame or SCI FY boards, layouts, etc. The connection between the maglev vehicles would be electromechanical, so no hard connection…
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
Make sure to print it in the labeled orientation, arrows up. Supports everywhere except the antistuds/backside To replicate the Seatron marbled ramp piece, you can color it in the slicer and then print it with either a Toolchanger or MMU…
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
This model is designed to allow your monorail playset track to split into two. The top section slides on rails mounted to the bottom one. At the moment I only have a left side, if you would like a right turn, tell me, and I'll do it. Or…
Lego Monorail has recently gotten a bit of a comeback with many vendors that sell printed track pieces and many track designs are available to download and print yourself. There is however a lack of new monorail motors, so I decided to…
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
This model is based on these from Thingiverse: https://www.thingiverse.com/thing:2378784/files But the turn pieces were way too tight, so here is a better version, I think. It should print fine at the scale I have it set to. The rest of…
This is the Monorail Transport System set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's…
The original model of the Mark VI monorail done by bradkoerner can by found at https://www.thingiverse.com/thing:5020822/files. Thanks Brad for this very nice model.
You need at least a 250mm printer to print this. Also check out these other free printable files: my monorail designs (motors, tracks, stanchions): https://www.printables.com/@cbrick/collections/2018360 other monorail track:…
This will need a lot of organic supports, but hybrid supports work best if you slicer supports that. I used red Prusament PLA for the print in the picture. Also check out the rest of my monorail designs, including motors, stanchion and…
You can also make s curves with two of the same half tracks Also check out these other free printable files: my monorail designs (motors, tracks, stanchions): https://www.printables.com/@cbrick/collections/2018360 other monorail track:…
This is a simple version of a monorail crossing that does not need a switching mechanism or digital control. Also check out my other monorail related models: https://www.printables.com/@cbrick/collections/2018360
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
[Update: new STL has slightly thicker outside walls] 12.25 inch long straight track (standard size) compatible with Disney Monorail Playsets. Track prints topside-down. No supports needed. Due to the length and narrow build-plate contact,…
A half-length track for the lego monorail system. It's in the same style like the quarter track I designed earlier. Works fine with only supports in the corners (for the elevated corner-parts and the studs). Safes a ton of printing time…
I found similar signs and models on the web, but I wasn't happy with them for various reasons. I created this model from scratch in Fusion so I could print it with four filament colors. The sign is printed with three filament color…
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
Lego Monorail Motor with the direction selector switch that was included in the original motor This uses a “MS-23C01” sliding switch on a custom designed pcb, that also allows you to power the motor from a small lipo battery inside the…
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
A ramp for the Lego-monorail-system. It complements to my five-brick-extention for the normal ramp, that elevates the track to 10 bricks, so you can bring the tracks to a normal level again, if maybe your mountain is 15 studs high. It…
Welcome aboard the Disneyland Monorail! For your safety, please remain seated, keeping your hands, arms, feet and legs inside the cabin. Watch your children, and no smoking, please. I built this model 2001 while attending my first…
This is the Monorail Transport Base set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's…
A quarter track for the Lego-Monorail. It's not very optimized but it works fine. I made a second version that fits onto building-plates. v13 is easier to print (with less holes) I use the grey BASF Innofil3D PLA by now, it has a pretty…
16 stud smaller radius than the original curve pieces. Also check out these other free printable files: my monorail designs (motors, tracks, switches, stanchions, other stuff): https://www.printables.com/@cbrick/collections/2018360…
8 stud smaller radius than the original curve pieces. Also check out these other free printable files: my monorail designs (motors, tracks, switches, stanchions, other stuff): https://www.printables.com/@cbrick/collections/2018360…
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
When designing our basement monorail layout, I wasn't happy with the "trapeze" style ceiling mounts I've seen elsewhere. I liked the idea of a 1990's "Tomorrowland" look. I designed this ceiling mount system that accommodates both single…
Endstopholder for upgraded Sculpfun S9 with monorail on x-axis + Laserhead S30 Pro, 10W. There are 2 Holders, one is For the X-Axis one for the Y-Axis. You need additional: Tool for M3-Threadcutting; or use an M3-Screw and cordless…
There are two different types of Bluetooth app controlled motors on Aliexpress, a yellow-white version (right) which goes for 2-5$ or a light blueish gray-white version which goes for 7-8$ that is also the same as the red-black version…
A riser so the Disney model monorail so it can go over a garden scale train.
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
An extention for the ramps of the Monorail-system. It extends the ramp five bricks in height and 16 studs in length. New version (v1): Improved for FDM-printers with 0.4mm nozzle. v0 prints teeth are slightly too small so the train…
8 stud offset to the left/right Also check out these other free printable files: My monorail designs (motors, tracks, switches, stanchions, other stuff): https://www.printables.com/@cbrick/collections/2018360 Monorail cars:…
This here is a curve of radius 40, not 44 as would be required to have a perfect 16 stud offset parallel circle. If you want a circle in parallel of the original size offset by 16 studs use this model instead…
These are replacements for the internal parts of the monorail switch so you can repair them Also check out the rest of my monorail designs, including full switches, motors, stanchion, track and more:…
Lego monorail motor replacement original connector for if your monorail motor is missing it's connector clips, as those cost way too much on bricklink. Also check out the rest of my monorail designs, including motors, stanchion and track:…
There are two different types of Bluetooth app controlled motors on Aliexpress, a yellow-white version (left) which goes for 4-5$ or a light blueish gray-white version which goes for 7-8$ that is also the same as the red-black version…
8 stud larger radius than the original curve pieces. Also check out these other free printable files: my monorail designs (motors, tracks, switches, stanchions, other stuff): https://www.printables.com/@cbrick/collections/2018360 monorail…
[Update: new STL v14 has slightly thicker outside walls] 22" radius inside curve monorail track allows you to run two parallel monorail tracks with curves. This track has a smaller radius than the standard Disney curve. Prints upside-down…
I made two different versions, the screw version uses 5 m3x6 flat head screws (the same my switch uses), the snap fit version is made to just be snapped together. The snap fit version might be less tight depending on your printer and…
Wall bracket for monorail track. I use small drywall screws to mount the brackets. Slot allows for height adjustment. No supports needed to print. Print Settings Printer Brand: Creality Printer: Ender-3 Max Rafts: No Supports: No…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
Track coupler for coupling a regular length track with a short track (< 6") when a full-size support is not desired. I don't recommend using this to couple two full size tracks; they need support. Print Settings Printer Brand: Creality…
Endstop holder for upgraded Sculpfun S9 with monorail on x-axis. There are 2 Holders, one is For the X-Axis one for the Y-Axis. You need additional: Tool for M3-Threadcutting; or use an M3-Screw and cordless screwdriver and it onto the…
So, stock TS-Optics (GSO) monorail focuser has plastic body with those stupid curves and 0 extra holes. I didn't want to remake the whole part, so i came up with this. Print this part, add two M4 threaded inserts and sandwich it on top of…
I just thought it would look funny, no chance a train will run on this. 24 stud smaller radius than the original curve pieces. Also check out these other free printable files: my monorail designs (motors, tracks, switches, stanchions,…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
There's a better one available here! This one is optimized for 3D printing , with a single reusable support piece that is inserted about 5 minutes into the print for practically perfect bottom surfaces. Requires additional attention: 1x…
Bumper fits onto the last support at the end of the track to keep the monorail from having a tragic accident. The main part of the bumper is the file "Track Bumper v10.stl". The second STL: "Track Bumper Pad v10.stl" prints the small…
New Lego Monorail track from Lego Education AI Sets, they will be released at the first of April, this model is made from the published design patent high resolution images, the sets have not been released yet.
This is a 16 long straight track optimized for SLA printing. This has the exact tolerances for use on JLC3dp.com. The image is in their gray resin. The piece on JLC is currently 2.35$ per piece, about 5x cheaper than original track. The…
5 inch straight track, compatible with Disney monorail playsets. STL and Fusion 360 files included. Track prints top-down on the bed. No supports; infill % shouldn't matter; I use 15%. Print Settings Printer Brand: Creality Printer:…
Mein Sohn hat sich das Gravitrax Theme-Set Balance gekauft. Darin waren ein paar durchsichtige Monorailschienen enthalten. Diese konnte ich nirgendwo online als Druck finden. Dadurch war ich inspiriert und wollte diese nachbauen. Dafür…
8 stud larger radius than the original curve pieces. This is the same as https://www.printables.com/model/1310550-lego-monorail-curve-r36 but this is split up to make s curves and to enable this to be printed on smaller printers. Also…
This part is needed in white if you want to replicate the seatron prototype monorail set, but it only exists in black. As the hinge part is not strong when 3d printed, I made it so you use an original lego hinge base instead of it being…
On newer monorail playlets, the station has small bumps in the track that hit a microswitch on the monorail engine to signal the train to slow down and stop. If you build a permanent track layout without the station, you can print 3 of…
3 inch straight track, compatible with Disney monorail playsets. STL and Fusion 360 files included. Track prints top-down on the bed. No supports; infill % shouldn't matter; I use 15%. Photos are of my 5 inch track - I'm too lazy to make…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
5 print pieces to make 1/16th of a 500 mm circle of beam for the Disney monorail model. The parts can be assembled with epoxy (best but most work), hot glue, or CA adhesive. The joints are precise but can be improved with…
4 inch straight track, compatible with Disney monorail playsets. STL and Fusion 360 files included. Track prints top-down on the bed. No supports; infill % shouldn't matter; I use 15%. Photos are of my 5 inch track - I'm too lazy to make…
STL files for monorail beam compatible with Disney HO monorails: 500 mm radius, 300 mm radius, straights, pylons Newer monorails with operating doors require coupler modification to run on the smaller radius curves. Older models should…
These can be useful but if you aren't careful this will ruin the whole "on grid" part of the lego monorail system and the non constant radius of curves. Also check out these other free printable files: My monorail designs (motors, tracks,…
Made this link to fix my broken Rokenbok RR415 monorail.
Print your own replacement doors for the Disney Monorail Playset. I printed my doors are at Cura's "Super Quality" (0.12mm resolution). After printing, the doors need to be warped to fit the monorail car. After cooling, unstick door from…
This is my attempt to make adapters for the switches to work diagonally on grid. You can use this to build yard ladders or just using switches in diagonals generally. Each switch needs 3 adapters to change the connector and for alignment.…
This is a free sample from my Kickstarter Kimondo - city of the Fallen Star. This is a set of files showcasing the monorail. You will find one pillar, rails and one rail car. https://www.myminifactory.com/users/terrain4print?show=store…
This is a more experimental approach to printing monorail track, but this is still quite reliable. The advantage of this approach is finer control over the top surface, no ugly supported underside and some saved filament. You need to…
Wall mount for a dual track installation. Attach to wall with small drywall screws. Slot allows fine-tuning the hight during installation. Print Settings Printer Brand: Creality Printer: Ender-3 Max Rafts: No Supports: No Resolution: .20…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
You do need a bigger than normal printer for this track piece, 280x280mm or more is required. You can also make s curves with two of the same half tracks Also check out these other free printable files: my monorail designs (motors,…
Probably there are better ways to do this (teflon film for example), but this mod is still better than stock. Main benefit is that if you have a 3d printer you already have all the parts. Completely degrease the focuser shaft and focuser…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
This model does fit the common 256x256mm printers if the track is rotated by 22.5 degrees. You can also make s curves with two of the same half tracks Also check out these other free printable files: my monorail designs (motors, tracks,…
Bracket holds the Disney 50th Anniversary monorail remote control. Attaches to wall with a small (6 x 1 1/4") drywall screw. STL and Fusion 360 files included. If you need a Disneyland Monorail remote bracket, check out this one:…
This model is compatible with the lego system.
This is meant to replace the clear plastic monorail window for Rokenbok. It's a shell design so you can either put in some sort of clear filler material, or just leave it empty. Has proven difficult to print but it's possible. Marked as…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
Dies ist meine modifizierte MK3 mit Bearframe, Orbiter2, E3D-Revo Micro und Linearschienen für X- und Y-Achse. Ich habe die komplette Baugruppe als Step-Datei angehängt. Die verwendete Linearschiene für die Y-Achse ist eine 393mm HIWIN…
Arca Swiss monorail adapter for ECO810 need M5x10 screws and 2020T M4 x5
