CARNIVAL MASK KARNEVALOVA MASKA
CARNIVAL MASK KARNEVALOVA MASKA
Wydruk około 3,31 €–4,05 € nettoWstępna wycena jednego wariantu
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
110 modeli
CARNIVAL MASK KARNEVALOVA MASKA
Wydruk około 3,31 €–4,05 € nettoWstępna wycena jednego wariantu
parts required 1x Ø2mm toothpick I love the Geneva Roller Ruler by MechEngineerMike from Thingiverse. It has a geneva wheel that count from 0.1 to 0.5m. But I wanted one that count from 0.1 to 0.9m, so I designed one. I also design this…
Support: The case_bottom needs support. Nothing else requires support. Carefully remove the support in the case bottom before assembly. Printing the Geneva gear at 0.12 layer height is recommended for smoother operation as z-seams…
This is a small model of a Geneva drive, can be used either just for fun or for educational purposes. You'll need 2x M3x14 cyl. srew, and 2x M3 nuts.
Our youngest son sent me a video of a wrist watch that he found interesting and wanted to know if I could explain to him how it worked. Well that would be too easy (for my ego at least, or maybe I'm just being played? ), so instead of…
Quick model of a Geneva gear mechanism I made.
Nevada, USA (NV) Topographic Relief Map with Rivers and Coastal Waters Nevada, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic project…
DESCRIPTION Geneva mechanism, also called Geneva Stop, one of the most commonly used devices for producing intermittent rotary motion, characterized by alternate periods of motion and rest with no reversal in direction. It is made with…
Important: pause at about 7mm when printing the frame to insert two M4 nuts as they are dropped into the cavity and then enclosed in the print This is a frame and stand for the wandering clock model:…
A simple digital clock with sequential Geneva drives. Easy time adjustment using sliding mechanism to release the engagement of Geneva drives Easy to make with only 9 printed parts Driven by a single motor Easy to print without support…
0.2 mm de capa, 35% de relleno, 3 paredes Material petg, preferible añadir balsa ya que se puede despegar las aspas.
Remix Information Modifications to the "Wandering Hour Clock" by clockspot Most details are included here but for full build details see my web page for this clock. Geneva Drive Clock…
Geneva brand steel kitchen cabinets were popular in the 50's. They featured a low profile cabinet handle that required a recess behind the handle. This was made of plastic. Today, these cabinets are popular for retro style kitchens. The…
Liegend drucken mit organischen Stützen layer 0.16 walls 3 infill Lightning 15% zum Beziehen mit Stoff Cover with Fabric
This is a HOn30 motor car for the Eureka-Nevada Railway. It used a newer Kato 11-109 or 11-110 power chassis with the plastic shell stripped off. Updated with more detail. Category: Hobby
This is a polygon modelled object, you can use it for make your own adapter or modify.
Konfetti im Herzen Kranz
Diese 3D-Druckvorlage zeigt ein dekoratives Schriftzug-Element mit dem Wort „Alaaf“ , eingefasst in einen eleganten Kreis. Das Design ist inspiriert vom rheinischen Karneval und eignet sich perfekt als stimmungsvolle Dekoration für die…
Las Vegas Strip Circuit, Nevada, USA, on a stand with it's name. Looks best when separate parts printed in different color filament. If you appreciate my work please consider donating me on Ko-fi . If you have some requests for new…
This is a simple Geneva mechanism, they are often used in mechanical watches, film movie projectors, movie cameras, plotters, automated sampling devices, and more. You will need to print two caps, which should hold in place with friction.…
Süsser Ring passend zu vielen Kostümen zu Fasching oder Halloween. Den Spinnenring habe ich auf dem struktuierten Blech gedruckt. Die Augen auf dem glatten. Bei den Augen habe ich wegen der Haftung einen Rand drumherum gelegt. Nach dem…
very cool print to mount on any kind of stuff, to connect the parts, i just soldered it together and it works, once again, nevaneva is the creator, not me, all parts except wings and tail can be printed without supports, happy printing
cup for carnival parade
When inserting the handle into the Geneva mechanism ensure that the handle goes all the way threw: In this video I show you how the mechanism ca be assembled: https://youtube.com/shorts/l1XSe7DLKuQ
A small model for my Geneve XL. Designed for the original countersink screws that came with the stand. I wanted to replace the stand with small feet to have the projector a bit lower. I used the 30 mm version with the original power cord.…
Introduction: This is a bit of a work in progress and is the first version of my Geneva Drive Extruder Visualizer. I will be using this on my printer and monitoring it to see how it performs over time. If there are any changes to be made,…
Geneva drive is a gear mechanism that translates a continuous rotation movement into intermittent rotary motion. This 6-spoke Geneva drive model has a ‘two-stage’ mechanism where the driven wheel is rotated twice during one complete…
The classic mechanism Geneva Wheel. Converts continuous turning movement to discrete turning movement. Geneva Wheel is a came/follower mechanism. Each continuous turn of the input axle, result in a complete turn of the output axle, on…
Intro This is a Geneva drive that can change size, thickness and #steps by changing spreadsheet. The inspiration comes from both Kens12 and from MangoJelly - Thank you !! Design Open model in FreeCAD then update yellow cells in…
The Geneva drive or Maltese cross is a gear mechanism that translates a continuous rotation movement into intermittent rotary motion.
Now includes a version for the Bambu CMYK Backlight Board and frame. Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well). The frame that allows the picture…
This was made from existing dimensions online, and has not yet been adjusted for 3d printing. I have included the SLDPRT files for anyone interested.
The Spherical Geneva Wheel This is a Geneva mechanism that uses F6901Z Flanged bearings to smoothly rotate when in operation. This model is great for learning how the Geneva mechanism works. It also makes a great desk fidget toy. The…
Nevalyashka Doll Hook Earrings. The beloved Russian "Roly-Poly" doll, designed as a delicate dangle earring. These unique hook earrings are a fun and symbolic accessory, perfect for adding a touch of playful culture to any outfit.…
This Geneva mechanism uses F6901Z Flanged bearings to smoothly rotate when in operation. This model is great for learning how the Geneva mechanism works. It also makes a great desk fidget toy. It only requires you to print 3 very simple…
Geneva, Switzerland. The most gorgeous city on earth.
A Geneva drive (or Maltese cross mechanism) converts continuous rotation into intermittent rotary motion using a drive wheel with a pin that engages slots on a driven wheel
For best results, print the wheels flat on the build plate and ensure your printer is dimensionally calibrated for smooth pin-to-slot engagement. This is a fully functional 4-slot Geneva drive mechanism designed in Fusion 360 and…
Quick model of a Geneva gear mechanism I made.
Runde Fensterornamente in den Kölner Karnevalsfarben Rot und Weiß. Ein Motiv mit dem Schriftzug „Kölle Alaaf“, das zweite mit einer stilisierten Darstellung des Kölner Doms. Mit integrierter Öse zum Aufhängen – ideal als…
The Geneva drive commonly found in motion picture projectors. Advances the film frame by frame with a momentary pause in front of the light source. Three 608 brgs req.
This is a simple assembly of a Geneva wheel that makes a great way to keep your hands busy. play with the mechanism, spin it like a noisemaker, chuck the knob in a drill and listen to it go. Enjoy, and happy printing.
It's a print in place geneva drive, also compatible with lego technic. No supports required. This model was made as part of a university course. The model has 0.2-0.3mm tolerances on the moving parts, so make sure your printer is dialed…
fidget malteser | Geneva drive | Malteserkreuzgetriebe → 0.4 Nozzle → 0.2 mm Layer Height → 30% infill → PLA Deburr all parts well and remove the Z-seams from the pins with the file or similar tool. The pins and gear parts should move…
Geneva Fidget Box Introducing the Geneva Fidget Box – a compact, stress-relief toy that masterfully combines artistic design with mechanical ingenuity. This innovative design utilizes a Geneva drive mechanism to produce intermittent,…
This is a 6 stage Geneva sequencer for the Dual drive robot base or any other thing you might have going on that needs a sequencer control. You Tube link provided with more information. https://youtu.be/i8J0reclIsU I have added a picture…
Tapón impreso en TPU para el irrigador de agua de la marca Nevadent que vendían en el Lidl, lo tuve que diseñar cuando se me rompió la tapita trasera que tenía este aparato, es recomendable hacerla en TPU ya que al ser flexible aguanta…
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 50+ Supports: No Print Orientation: Default as modeled Optional: Add color change at layers 31, 83, and 130 for optimal visibility of numbers and drive wheel post.…
The Geneva drive or Maltese cross is a mechanism that translates a continuous rotation into intermittent rotation. The classic use of the design was in the movie projector. Each frame is advanced quickly and then retained in that position…
This basic Geneva Mechanism has 6 steps and has a small handle for the input. A 1:1 spur gear allows for the input to be placed further away from the output and allows for more space for the output. The output has a small clutch that…
Wall holder for the irrigator, mounting with double-sided tape. Two versions: for wall and cornice mounting. Uchwyt ścienny na irygator, mocowanie na taśmę dwustronną. Dwie wersje: do montazu na ścianie i na gzymsie.
This is a model of the NEVA delta 3D printer https://www.tinkercad.com/things/cEvGtG8qu3e-3d-printer-neva Print Settings Printer Brand: LulzBot Printer: TAZ 5 Supports: Yes Category: 3D Printers
Le volant Nevax n'existe plus en pièce détachée … Je l'ai recréé en 2 pièces pour intégrer entre les 2 la partie laiton. Imprimé en PETG 0.2mm et les 2 pièces collées après mise en place de la partie laiton Utilisé sans soucis depuis qq…
fusion de la cale de transport des NEVA et d'un support pour ranger les SD card. J'ai opté pour une double accroche au niveau de tiges, comme cela il est possible " d'ouvrir " le support par exemple pour utiliser un support de bobine…
I liked the Dagoma Neva spool support by Achrome that I found on Thing I verse and I likes the spool holder clip by Phende, so thought I would give them a try. Turns out that most of my filament comes in reels that are much wider than the…
This is a Geneva Wheel Mechanism set up for 5 stops. It will need (2) M3x.5 @ 10mm screws, for which I highly recommend pre-tapping the holes in the base. They're modelled threaded, but threads that fine often need a little help. This…
This is a Geneva Wheel Mechanism set up for 8 stops. It will need (2) M3x.5 @ 10mm screws, for which I highly recommend pre-tapping the holes in the base. They're modelled threaded, but threads that fine often need a little help. This…
Die Zähne und Perlen haben jeweils ein Loch mit einem Durhmesser von 2 mm. Bei den Druckdateien sind jeweils 9 Zähne bzw. Perlen durch kleine Stege miteinander verbunden, so dass sie beim Druck nicht umfallen. Die Verbindungen können…
Les dejo mi tapa para cajas de pañuelos, la inspiración es el “Nevado de Toluca” que se puede ver en todo el valle donde vivo con mi familia, la idea es transmitir el concepto de un “corte” a la corteza terrestre en donde se ven las capas…
The Geneva drive was invented by Swiss matchmakers in the 17th-18th century. It was later adapted to be used in film projectors , converting continuous rotation into intermittent rotation . This particular 4-slot variant was refined and…
This model was inspired by a Three-Stop Geneva drive from MechAniVerse over at youtube. The Video is embedded below. Please visit the channel numerously and enjoy the mechanisms. I recreated this mechanism for the purpose of a door lock…
the wall of the screw was reinforced: 3mm versus 0.8 in the standard part
The STYLE COLLECTION HOME – Geneva Candle Holder is the ultimate versatile design piece , perfect for any setting. Whether displayed as a standalone statement or combined to create endless elegant and exciting arrangements , this candle…
Complete mountain range of the Sierra Nevada
Nevax remplacement de la poignée du détendeur de chalumeau que ce soit oxygène ou acéthylène. La poignée est fragile mais n'existe plus au catalogue NEVAX … en 2 pièces pour intégrer la partie métallique en laiton à récupérer, puis…
Dies ist ein Remix vom großartigen Brillenmodel https://www.printables.com/de/model/203781-3dbk-frames. Die Augen müssen aufgeklebt werden. Die beweglichen Augen müsse natürlich vorher eingelegt werden. Die Bügel für die Brille sind vom…
Geneva mechanism model, it can be used for educational purposes to understand its operation or as a fidget toy. It's recommended to print the parts separately and then assemble them.
Designed to hold internally routed cables in place and cover the entry port. It is angled so the cable is protected from the sharp edges of the port. It is sized for shift cable housing (4mm) but I included the F360 model so you can…
Intended for storage and use on Opentrons OT-2 robots. Adheres (more or less) to the ANSI microplate standard. Should be printable without supports in well behaved filaments like PLA.
„Kölle Alaaf“ als freistehender 3D-Schriftzug mit integriertem Sockel. Durch die stabile Basis steht das Modell selbstständig und kann direkt platziert werden. Ideal als: - Tischdekoration für die Karnevalsparty - Regal- oder…
This is a Geneva Wheel Mechanism set up for 4 stops. It will need (2) M3x.5 @ 10mm screws, for which I highly recommend pre-tapping the holes in the base. They're modelled threaded, but threads that fine often need a little help. This…
Geneva Drive Mechanism This is a cool model I made that is a simple Geneva drive, its designed to function, but not designed for actual mechanical use, only cosmetic. A Geneva drive is a special type of mechanism that takes continuous…
Mountain range of the Sierra Nevada desert (USA) from Ridgecrest to Pyramid Lake.
This fun little gear fidget spinner will spin almost as well as a normal one, but with a twist. Instead of normal gears, it has Maltese cross gears that collide with stationary pins in the middle and make a 90° turn every time, which is…
original stand was in wriong direction so cable wont fit on my shelf +I wanted to make some customization with names on the stand :) Space for names is in front of toothbrush extension. No support needed, printed from PETG 0,3 Category:…
Salut c'est Hanjo de BODY3D ! Ceci est un Remix de thing:2484873 by Achrome. J'ai fait ce support de Gopro pour ma Neva, en complément du support de bobine. Je ne suis pas un pro en modélisation, mais ça fonctionne ! Creality CR-10 VS…
This is an educational demonstration model of a Geneva Drive. The Geneva Drive is a mechanism that creates timed intermittent motion from continuous motion. I made 2 variations. One is powered by a 12VDC motor and the 2nd is a standalone…
Tired of having to pick up the top panel of my Castorama Neva fence from the ground after every windstorm, I made this clip. Made to fit on Neva aluminium posts (7 cm square) from Castorama. Need supports to be printed, preferably with…
Replacement feet for my Model S speaker.
Print Settings Layer Height: 0.12 mm Supports: None Orientation: Print the Indexer Wheel upside down (flat face on the bed). Print the Drive Wheel and Base Frame flat on their bottom faces. Assembly Instructions Base: Lay the Base Frame…
vytvorené vo Fusion360 , prikladám súbor *.f3d pre iný formát súboru napíš pre iný tvar napíš
Controlling a valve using HomeAssistant ESPHome some automation and a steppenmotor.
Onevan blower can be a vacuum! Use this adapter to attach filter with case from mini vacuum as shown on the photo. Print it on a wider end.
As you can see in the photos, the original part was broken. I couldn’t find a suitable spare part, nor any existing 3D model for printing, so I designed and made this adapter myself. The Nevada vacuum cleaner I made this for is quite old,…
CUSTOMIZABLE educational model: a hand-cranked Geneva drive you can rebuild in the free TrueGeometry Playground with 4, 6 or 8 slots. Turn the crank and the slotted star wheel advances one slot per turn, then locks and rests. Made for…
This is just the first model and by no stretch of the imagination is it finished the one I made was in PLA
The GIF/animation above shows the real movement, rendered from the same positions used in the collision simulation: one turn of the red knob = one day, with a Geneva drive (Maltese cross) "clack". A perpetual desk calendar in Japanese…
A Brake Support for an 'Ultra Wheels' branded Nevada LS Roller Blade. Old piece had shattered and was no longer useable. Print with flat rear-most part against build plate - should be printable without supports. I used 0.2mm layer height…
Print settings: Step: 0.2 Shell: 3 Infill: 30% Supports: No Filament: PETG GST3D (Black)
Classic intermittent indexing motion mechanism converting continuous rotary motion into precise stepped angular displacement via crank driving pin and slotted star wheel. Классический механизм прерывистого шагового вращения (индексации).…
Happy Birthday Nevaeh, I hope you like this first ever artistic creation, only to be duplicated for eternity : )
2 Gears, 1 Base and a small crank for manual rotation ! A little bit of glue was used to stick the crank and the first gear together.
The STYLE COLLECTION HOME – Geneva Candle Holder is the ultimate versatile design piece , perfect for any setting. Whether displayed as a standalone statement or combined to create endless elegant and exciting arrangements , this candle…
When inserting the handle into the Geneva mechanism ensure that the handle goes all the way threw: In this video I show you how the mechanism ca be assembled: https://youtube.com/shorts/l1XSe7DLKuQ
A small model for my Geneve XL. Designed for the original countersink screws that came with the stand. I wanted to replace the stand with small feet to have the projector a bit lower. I used the 30 mm version with the original power cord.…
Runde Fensterornamente in den Kölner Karnevalsfarben Rot und Weiß. Ein Motiv mit dem Schriftzug „Kölle Alaaf“, das zweite mit einer stilisierten Darstellung des Kölner Doms. Mit integrierter Öse zum Aufhängen – ideal als…