P
PrintablesJulien Mairy
Giganotosaurus scanned with revopoint POP3 Plus - Dinosaur
Giganotosaurus scanned with revopoint POP3 Plus and printing resin
- Pobrania
- 2388
- Polubienia
- 532
- Ocena
- 4,67
Wyniki wyszukiwania: notos
Liczymy pasujące modele…
P
PrintablesWilliam Hemmingsen
Notos 10 shot 22 magazine
See attached PDF for instructions. Enjoy! Note: Not mentioned in instructions, but required a 3x2 magnet.
- Pobrania
- 1230
- Polubienia
- 53
- Ocena
- 4,33
P
PrintablesPoncho
Giganotosaurus Dinosaur Kit Card
A kit card figurine/sculpture of a giganotosaurus. An adhesive may be required depending on tolerance. I used super glue.
- Pobrania
- 1223
- Polubienia
- 284
- Ocena
- 4,67
P
PrintablesRobot3dart
Jointed Giganotosaurus
This is a Giganotosaurus model consisting of 11 parts, capable of limited articulation after assembly. The leg joints are printed as a single piece, with a 0.2 mm gap reserved for movement. If the joints cannot move, it means the…
- Pobrania
- 965
- Polubienia
- 364
- Ocena
- 5
P
PrintablesDeadMan3D
Giganotosaurus Dinosaur Kit Card_Remake
Printed in PETG. 150mm/s. 235 degrees c. No supports or bed adhesion.
- Pobrania
- 609
- Polubienia
- 93
- Ocena
- 3
P
PrintablesWilliam Hemmingsen
Notos/PP750 AR stock adapter
Printed with 10 walls. Supports required.
- Pobrania
- 458
- Polubienia
- 33
- Ocena
- 4
P
Printablespavel benes
Giganotosaurus
Giganotosaurus z filmu Jurský Svět Nadvláda
- Pobrania
- 423
- Polubienia
- 38
- Ocena
- 0
P
PrintablesWilliam Hemmingsen
Notos Bipod Mount And Handguard
Flip 180 degrees for ease of printing. Required 3 heat set inserts and 3 M3x20 screws. Secure with 3m double sided tape to prevent from rotating
- Pobrania
- 416
- Polubienia
- 33
- Ocena
- 5
P
PrintablesB_eazy01
Notos 10 shot 22 magazine remix
Includes a Bamboo 3mf file of all three parts.
- Pobrania
- 386
- Polubienia
- 32
- Ocena
- 5
P
PrintablesRobert Huebner
Umarex NOTOS lower hand guard and pic rail one piece
Easy solution for mounting a bipod on an Umarex NOTOS. Slides over the air cylinder with no modification to the gun. Included the Solidworks file if you want to modify it at all.
- Pobrania
- 342
- Polubienia
- 24
- Ocena
- 0
P
PrintablesMinus One
Giganotosaurus
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
- Pobrania
- 323
- Polubienia
- 263
- Ocena
- 0
P
PrintablesAngel
Notos air tube grip with bottom pic mount
Thanks for stopping in and checking out my 3D prints, this one I designed and used on my Notos for a while, I since then have made several different styles of hand guards with different mounts. I wanted to share this one with you to help…
- Pobrania
- 317
- Polubienia
- 29
- Ocena
- 5
P
PrintablesBill Ruehl
Umarex Notos Carbine Magazine holder PLUS+
I have had great success making these of PLA with 3 perimeter walls and 20% fill. Print picc rail down with supports and you should be fine. You can also order them printed and with all the hardware installed at the targetforge.net…
- Pobrania
- 270
- Polubienia
- 29
- Ocena
- 0
P
PrintablesKycirion
Umarex Notos Moderator Insert
I wanted to test increasing the sound suppression on my Notos without chopping off the stock moderator. So I made a new insert with more baffles that can be used stand alone without the external suppressor. This baffle insert increases…
- Pobrania
- 261
- Polubienia
- 15
- Ocena
- 5
P
PrintablesDidyousaybacon
Umarex Notos extended cocking lever
Extended cocking lever with a 12mm and 18mm offset to give more space between the mag and charging handle, the handles are threaded for m5. I haven't had time to test but for basic function and fit.
- Pobrania
- 238
- Polubienia
- 26
- Ocena
- 5
P
PrintablesKycirion
Notos Mag Remix
I love William Hemmingsen's Notos magazine, (Thanks William!") but I was having some binding issues and lacked some small parts. So I made a couple small changes. I did not make any changes to the wheel, so please grab that from William's…
- Pobrania
- 224
- Polubienia
- 25
- Ocena
- 0
P
PrintablesSeaBass
Notos 10 shot 22 magazine Remix 5x2mm magnet v2.0
*Updated Aug. 24, 2025* After a few prints and some trial and error, I have made version 2.0 of this remix. I modified several things to make the wheel spin smoothly. I also changed the assembly instructions (original instructions PDF is…
- Pobrania
- 222
- Polubienia
- 24
- Ocena
- 5
P
PrintablesRobert Huebner
Umarex NOTOS hand guard with picatinny rail for bipod or light
Umarex NOTOS picatinny rail , full length with block screw tab to fix it to the rifle. A more refined version of my first one. Now uses the block screw to attach . Slips over air cylinder on the Umarex NOTOS air rifle adding a pic rail to…
- Pobrania
- 201
- Polubienia
- 10
- Ocena
- 4
P
Printablesnagolnad
Notos 10 Shot 22 Mag Remix Smooth Wheel Edition
I could not get any of the currently posted mag wheels to print well due to the knurling and the way it was being sliced. The wheel in this model removes the knurling so that it will slice and print as a circle. I adjusted a few of the…
- Pobrania
- 186
- Polubienia
- 16
- Ocena
- 5
P
PrintablesqLes
Giganotosaurus Skull (Remake)
Giganotosaurus carolinii was one of the largest meat-eating dinosaurs , possibly even bigger than T. rex, but it had a lighter, more slender skull , built for speed rather than crushing power. Sculpted in blender, the model is divided…
- Pobrania
- 170
- Polubienia
- 35
- Ocena
- 0
P
PrintablesMartinT
UX Notos Single Shot tray
Use the original pellet feed arm, and a toothpick/bbq skewer as axle pin. The whole thing (body + arm) can be mirrored in your slicing software, so you can have it either as a left or right hand side pellet loader! Thanks to Art&FlyWork…
- Pobrania
- 161
- Polubienia
- 8
- Ocena
- 0
P
Printablesseth the yutyrannus
giganotosaurus
this dinosaur comes from the movie Jurassic World Dominion
- Pobrania
- 154
- Polubienia
- 9
- Ocena
- 0
P
Printablesagibson2
Slip-on moderator for Umarex Notos
This is a moderator for the Umarex Notos air gun. This is not for firearms use and only fits on the Notos air pellet gun. This slides over the built in moderator/barrel end of the stock Notos air gun and does not require any modifications…
- Pobrania
- 153
- Polubienia
- 17
- Ocena
- 5
P
PrintablesWilliam Hemmingsen
Notos Magazine holder (CARM, Maple, Mine)
Use a M3x10 flathead to secure to rail. Optionally 3 3x2mm magnets. I have uploaded the STEP file if anyone wants to remix.
- Pobrania
- 148
- Polubienia
- 16
- Ocena
- 0
P
PrintablesPeter
Umarex NOTOS hand guard with picatinny rail (fixed length for air valve connector)
Remix of original Robert Huebner's hand guard to fix issue with bulky air pump connectors.
- Pobrania
- 146
- Polubienia
- 12
- Ocena
- 0
P
PrintablesWilliam Hemmingsen
Notos Fill Probe clamp
With this clamp you can leave the fill probe in at all times without risk of loss. It also prevents the fill probe from being accidentally yanked out during filling or while tethering. There are two files depending on what side you want…
- Pobrania
- 127
- Polubienia
- 18
- Ocena
- 3
P
PrintablesAvaf Manion
Umarex Notos picatinny mount for .22L bottle upgrade
I designed this up for the umarex notos that has a huben regular/drop block and a .22L bottle. Bottle diameter = 54mm Barrel diameter = 32mm [12/26/2025] I also added a 61mm bottle step file. This has not been tested. Clamps around the…
- Pobrania
- 122
- Polubienia
- 11
- Ocena
- 0
P
PrintablesDragonArtist15
Tenotosaurus Figurine
1:24 Scale model of a tenotosaurus. The model features detailed scale and skin texturing along the model. I created two variants of the model: standing, and posed. I recommend printing it at a finer layer height or with a resin printer.…
- Pobrania
- 117
- Polubienia
- 19
- Ocena
- 0
P
PrintablesWilliam Hemmingsen
Simple Fixed stock (fits Notos, Others)
A simple fixed stock I made for the Notos
- Pobrania
- 101
- Polubienia
- 9
- Ocena
- 0
P
PrintablesWilliam Hemmingsen
Notos custom shroud
The main shroud should be printed standing up. You will need a tall build area. The small picatinny part print at 100% for strength. Required the c88 Plenum mod.
- Pobrania
- 99
- Polubienia
- 10
- Ocena
- 0
P
PrintablesZombie crappie
notos handrail
I added pic rail to the other end of the handrail so I could move my bipod down the barrel farther.
- Pobrania
- 94
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBryzarr
Umarex Notos Magazine and tools holder
To be PERFECTLY clear, this is for a pellet gun. An AIR rifle. I love the rifle. Between my boys and mine, we have 3 of them. Not a huge fan of the Magazines though... This holds 3 mags, the filler adapter, and the single shot ramp nicely…
- Pobrania
- 91
- Polubienia
- 8
- Ocena
- 0
P
PrintablesLittlefieldpc
Fill Probe Holder for Umarex NOTOS
This is a fill probe holder for an umarex notos. I designed this for a guy at work, he gave me some dimensions to work with, I also designed a recess on the side plate for an m3 nut. He told me he slightly modified it after it was printed…
- Pobrania
- 88
- Polubienia
- 9
- Ocena
- 4
P
PrintablesqLes
Giganotosaurus Skull
THE MODEL HAS BEEN REMADE INTO A BETTER VERSION HERE: https://www.printables.com/model/1215582-giganotosaurus-skull-remake The model does not have pins or other things to attach the two parts; if you plan to keep the print on a shelf with…
- Pobrania
- 88
- Polubienia
- 14
- Ocena
- 0
P
PrintablesBalconyWatcher
Umarex Notos Bipod Grip (Man Of Sport and Leisure Remix)
This grip for the Umarex Notos airgun has dual functionality for precision shooting with its 5 position adjustable bipod and vertical angled foregrip. The optional foregrip provides improved ergonomics and control for off hand shooting.…
- Pobrania
- 73
- Polubienia
- 12
- Ocena
- 0
P
PrintablesZombie crappie
notos handrail
remixed to have a full pic handrail
- Pobrania
- 66
- Polubienia
- 3
- Ocena
- 0
P
PrintablesWilliam Hemmingsen
Notos C88 Cover
A small print to cover the C88 moderator adapter. Install heat set insert in top. Requires an 8mm m3 screw to secure. Do not over tighten!
- Pobrania
- 66
- Polubienia
- 8
- Ocena
- 0
P
PrintablesRobert Huebner
Umarex NOTOS Suppressor Sleeve - Threaded Barrel
Sleeve to go over OEM suppressor on an Umarex Notos air rifle. Adds 5/8 x 24 threads to the end of the barrel. Included air stripper cap and blank thread protector. They are plastic threads, so be careful. I added a tiny bit of silicone…
- Pobrania
- 60
- Polubienia
- 14
- Ocena
- 0
P
PrintablesJackD Creations
Umarex Notos 1913 Grip
Umarex Notos 1913 Grip Designed for the Umarex Notos. This design has not been tested on the Umarex Notos Gen 2, so compatibility with the Gen 2 is not guaranteed. It’s time for the Notos to lose a few inches! This replacement grip adds a…
- Pobrania
- 55
- Polubienia
- 10
- Ocena
- 5
P
PrintablesNo Name
ultimate notos magazine, make it your way, umarex
filled center for use of guitar pick guard screw. no insert, also back side has the notch to line up. i mixed like 3 different elements of other peoples mods of the original original. lol now i wont need to hunt around to find all the…
- Pobrania
- 37
- Polubienia
- 7
- Ocena
- 0
P
PrintablesJackD Creations
Umarex Notos M-Lok Handguard
Umarex Notos M-Lok Handguard Designed for the Umarex Notos. This design has not been tested on the Umarex Notos Gen 2, so compatibility with the Gen 2 is not guaranteed. It’s time for the Notos to have more mounting points! This handguard…
- Pobrania
- 27
- Polubienia
- 7
- Ocena
- 0
P
PrintablesGNDconcept3D
Plane hanger Notos Planeprint
Plane hanger sized for the wheel of the notos
- Pobrania
- 17
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDekbanna
All Alphabet Letters Upper case A-Z Font: NotoSerif-Bold (by Google Fonts (OFL License)
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com , but I’ve already done the work of converting them into ready to print STL files, all from 149…
- Pobrania
- 16
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDouglas B
Umarex Notos (OEM) Rear Stock Wall Mount / Holder
I needed a buffer tube style wall (closet door) mount for my Umarex Notos, but standard AR mounts don't work smoothly because the Notos OEM stock has a ridge that gets in the way/isn't perfectly round. This is inspired by Joulez's AR wall…
- Pobrania
- 12
- Polubienia
- 2
- Ocena
- 0
P
PrintablesNo Name
31mm o ring for umarex notos magazine
I didnt have the right size rubber o ring. i made one in tpu instead. i tried 27mm 28mm and 30, 31mm was the sweet spot.
- Pobrania
- 10
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDekbanna
All Alphabet Letters Upper case A-Z Font: NotoSans-Black (by Google Fonts (OFL License)
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com , but I’ve already done the work of converting them into ready to print STL files, all from 149…
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMike
Notos Handguard with arca rail
printed in PETG and installed using heat set inserts and a few dabs of RTV on the air tank to really lock it down
- Pobrania
- 4
- Polubienia
- 2
- Ocena
- 0
P
PrintablesHaus
UX Notos Mag Deckel cal.177
Ersetzt den Ersatz Magazin Deckel da dieser ein lang loch hat und ständig hängt
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
P
Printables
Notos 10 shot 22 magazine
See attached PDF for instructions. Enjoy! Note: Not mentioned in instructions, but required a 3x2 magnet.
