Wyniki wyszukiwania: nso

Sortowanie

10 096 modeli

Spool holder and drybox for Enclosure V2 - with humidity sensor

This version of the spool holder is WITH hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Blog article: Drybox build instructions .

Pobrania
18 696
Polubienia
4874
Ocena
4,74
P
Printablesfifindr

Mini Spiky Sensory Sphere Twisty Fidget Toy

Use normal supports on build plate only. A compact twisty sensory fidget sphere with a spiky textured surface. The sphere is built from rotating segments that can slide and twist along the central axis, creating a satisfying mechanical…

Pobrania
18 111
Polubienia
1552
Ocena
4,53

Drybox for Prusa Printer Enclosure V2 - without humidity sensor

This version is WITHOUT hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Article with build instructions:…

Pobrania
10 924
Polubienia
983
Ocena
4,64
P
PrintablesŠtěpán

Prusa Mini filament sensor holder

This holder makes changing filament one arm operation again and makes the printer tidier. Primarily intended for our farm, where spools are hanging from the top, but you can use it even on the table with spool behind your printer, just…

Pobrania
2772
Polubienia
597
Ocena
4,85
P
PrintablesAhmad

Dwayne "The Rug" Johnson AKA The Rock Articulated Slug

Credit to original creator: https://www.thingiverse.com/thing:5148846 Printed at scale 150%, and added custom support for the chin.

Pobrania
1850
Polubienia
161
Ocena
5
P
PrintablesJan Hubík

Capacitive Soil Moisture Sensor v2.0 Cover

Outdoor cover for the popular analog Capacitive Soil Moisture Sensor v2.0 (according to comments, this also fits version 1.2). No soldering changes are required. I just crimped a JST 2.54 mm female connector on the cable. The cable…

Pobrania
1494
Polubienia
93
Ocena
5
P
PrintablesTrickyCode

Supportless 2021 2022 Tesla Model 3 Y Rear Center Console Arm Rest Tray By Printer2261

This model is originally from Tingiverse, made by Printer2261 also known as Shane Jackson. https://www.thingiverse.com/thing:5172136 But I thought that users of printables would also like to be able to print this, since the Tesla Model Y…

Pobrania
1154
Polubienia
208
Ocena
4,63
P
Printablesfifindr

Mini Rounded Sensory Sphere Twisty Fidget Toy

Use normal supports on build plate only. A compact twisty sensory fidget sphere with a rounded textured surface. The sphere is built from rotating segments that can slide and twist along the central axis, creating smooth and satisfying…

Pobrania
1014
Polubienia
86
Ocena
5
P
PrintablesMultisystem

2021 (First Version) MiSTer Multisystem classic gaming console 3D Printed enclosure design

Please note that a revised Version V5 (2022) of this enclosure is also available on Printables Here - MiSTer Multisystem V5 2022 classic gaming console 3D Printed enclosure design by Multisystem | Download free STL model | Printables.com…

Pobrania
755
Polubienia
30
Ocena
5
P
PrintablesFra085

Prusa MINI Internal Filament Sensor (IFS)

READ THIS TO BETTER UNDERSTAND THIS MOD BEFORE PRINTING This mod needs you to flip the IR sensor connector so be ready to swap cables as described below. You can damage the sensor if you will not follow these instructions. Updates at the…

Pobrania
747
Polubienia
248
Ocena
4,86
P
Printablesfifindr

Mini Dimpled Sensory Sphere Twisty Fidget Toy

Use normal supports on build plate only. A compact twisty sensory fidget sphere with a dimpled textured surface. The sphere is made from rotating segments that can slide and twist along the central axis, creating satisfying mechanical…

Pobrania
732
Polubienia
56
Ocena
5
P
Printablesdodasch

BME280 Sensor Case

BMP280 / BME280 Sensor Case with strain relief for 2-8mm diameter Cables You need 2x M3x10 DIN912 Screws This is a composite Part, click on “Split to Parts” in PrusaSlicer and right click on the intended elements. Add the following Part…

Pobrania
696
Polubienia
51
Ocena
5
P
Printableszoltanf

Garage Door Adapter for 2nd Gen. Ring Alarm Contact Sensor

Simple and quick print. Prints in-place, no need for any supports. Print it with 4 perimeters and 100% infill, to be a bit stronger/heavier. After printing make sure to work it out a bit manually so it moves freely. Mounting instructions…

Pobrania
675
Polubienia
67
Ocena
5
P
PrintablesMarkus Lang

D1 mini v3.0 reed sensor case for a BK-G4 gas meter

This is a mashup of the following two models to be able to mount a D1 mini v3.0 together with a reed sensor onto a BK-G4 gas meter: https://www.printables.com/model/111029-d1-mini-v3-snapcase-low-profile…

Pobrania
643
Polubienia
31
Ocena
5
P
PrintablesAlex Martinez

Creality Ender-3 V3 KE SE G Sensor Cable Holder v1

I designed a clip to hold the G Sensor cable for the Ender 3 V3 SE printer, as I didn't like it hanging loose. I found another clip that attaches it to the top frame, but it wasn't functional for me because it stretched the cable too much…

Pobrania
552
Polubienia
45
Ocena
5
P
PrintablesNS

Capacitive Soil Moisture Sensor v1.2 v2.0 Case (box)

Allow me to introduce you Capacitive Soil Moisture Sensor v1.2 and v2.0 Case (box). I required this sensor in one of the previous projects and create case for it, to make it more secure. Hope you will enjoy it. Print instructions:…

Pobrania
525
Polubienia
31
Ocena
5

Dwayne "the Vase" Johnson aka The Rock

No reason at all. None. I picked the egg because it had a nice chin & nostrils for vase mode.

Pobrania
503
Polubienia
197
Ocena
4,86
P
PrintablesTom

Tesla Model 3 and Model Y Rear Center Console Arm Rest Tray

I really liked this design and found it to be closest to the OEM one that Tesla used to provide for free. However, I found the STL to have some odd artifacts and difficult to paint in PrusaSlicer for a combined PETG+TPU print on my XL.…

Pobrania
490
Polubienia
69
Ocena
5
P
Printableschubbs8697

Ford F-150 Gearshift Detent for 2009-2014 F-150s with Floor Shifter / Console Shifter

This is a replacement detent arm for Ford F-150 trucks built from 2009-2014 that shift gears using a floor shifter / console shifter. The original Ford part is very fragile and can easily break when the gear shift assembly is being…

Pobrania
457
Polubienia
16
Ocena
5
P
PrintablesRonald Lokers

Abbott Freestyle Libre Sensor holder

A holder for the Abbott FreeStyle Libre sensor that can be used with a 20mm wide elastic band. This holder helps to keep the sensor stuck on your arm.

Pobrania
454
Polubienia
22
Ocena
5
P
Printablesshanelord

Arm Rest Console Tray for Tesla Model 3 MY21 - print with gcode file for Mini+

Summary Organizer tray for the arm rest console - adjusted STL with slopes under ledge for less requirement for supports, and gcode file adjusted to fit supports on the Mini+ plate. Note : Print using the gcode file if possible (using…

Pobrania
436
Polubienia
60
Ocena
5
P
Printablesschmidtflo

Anycubic Vyper Filament Sensor Holder (PTFE-Input)

You want to feed your Vyper with filament through a bowden tube? With this new filament holder design, you can stick a bowden tube into the filament sensor input and feed your filament from a distance. Replaces the old tiny metal bracket.…

Pobrania
404
Polubienia
44
Ocena
4,67
P
PrintablesLinkDesigns

The Rock - Dwayne "The Pot" Johnson

Print Dwayne at any scale you need (mine was 75%) and enjoy his plant-growing abilities. Print Settings: Resolution: .15mm Infill: 15% Supports: No Rafts: No Material: PLA Printed on: Creality CR-10 Note: I was unaware of this, but…

Pobrania
387
Polubienia
101
Ocena
5
P
PrintablesPablo Cruz

JSN-SR04T Water Level Sensor Case

I used JSN-SR04T waterproof ultrasonic sensor to calculate the water level in a water tank. The idea is to calculate the distance to the water level and use that number to calculate the volume of water inside the tank. The sensor is…

Pobrania
387
Polubienia
26
Ocena
0
P
PrintablesRasspolniku

Dwayne "The whistle" Johnson

An emergency whistle with the rock's head on it WARNING - VERY LOUD! whistle is from https://www.thingiverse.com/thing:3130078 if you made one then please post a make. 4/25/22 fixed open edges 5/8/22 added Big version that has slightly…

Pobrania
351
Polubienia
48
Ocena
5
P
PrintablesDaGov

Bondtech feeder with internal filament sensor - IFS (BMG parts compatible)

This is implementation of Bondtech feeder with Prusa internal filament sensor (IFS). You need extend some holes with roamer 3 mm and thread M3, M2 (for filament sensor) and M6 for fittings. Older version without filament sensor

Pobrania
350
Polubienia
50
Ocena
5
P
PrintablesREMLURELMI

Remix - Larger Console Tray for Honda Passport/Pilot/Ridgeline

Remix of dMosher's design “ Larger Console Tray for Honda Pilot or Ridgeline ”, with minor improvements. This should be compatible with the following vehicles that use “Base Tray” part number 83407-TG7-A01 or 83407-TG7-A02: 2016-2022…

Pobrania
337
Polubienia
57
Ocena
5

Articulated mount Ikea Tradfri motion sensor (PIR E1525/E1745)

The 3D printed mount is designed to perfectly fit the Ikea Tradfri motion sensor, ensuring a snug and secure fit. Whether you prefer a more permanent installation with screws or a flexible and removable option with magnet, this 3D printed…

Pobrania
316
Polubienia
42
Ocena
5
P
PrintablesActusReus419

Henson Razor Stand with Torque Center

This is a razor stand for the Henson Shaving AL13 safety razor. Includes a torque center that makes blades changes safer. Instead of holding on to the razor head with wet fingers, simple put the head of the razor in the torque center and…

Pobrania
316
Polubienia
36
Ocena
5
P
PrintablesJSeppl

Strong wall bracket with round bar support. / Shelf Bracket / Regalkonsole

Strong wall bracket with round bar support. -- A round bar with a diameter of 20 mm is required for the print. The round bar must be angled at the ends and must rest against the wall and the overlying wooden board. Printed with 0.4 nozzle…

Pobrania
292
Polubienia
127
Ocena
5
P
Printablesmkoistinen

Tesla Model 3 Console Tray with integrated USB Hub + J1772 Slot

OK, so this is a remix of my own model here: https://www.prusaprinters.org/prints/5805-tesla-model-3-tray-wj1772-storage-slot . I've integrated a USB Hub into the tray. This essentially adds 3 more USB ports, which is perfect for me to…

Pobrania
290
Polubienia
103
Ocena
5
P
PrintablesLafa

porte telephone , tablette ou console switch

support pour tenir la tablette ou même la switch

Pobrania
277
Polubienia
11
Ocena
0

Sensory play stamp cubes with pictures

The stamp cubes measure 4×4×4 cm. There are 6 pictures on each cube that you can use to stamp into modeling clay or kinetic sand. The cube develops fine motor skills, vocabulary (create stories), and imagination. The cubes have the…

Pobrania
260
Polubienia
58
Ocena
5
P
PrintablesmCex9WfH

Polestar 2 - Bin for the central console

This is a bin for the front part of the central console in the Polestar 2. Handy to keep your loose change, for example.

Pobrania
257
Polubienia
20
Ocena
0
P
Printableskhord

Prusa MK3S+ Reverse Bowden Filament Sensor Cover

Remix of Alex Ward's MK3S+'s reverse bowden cover. I did not realize at first that the center post was not the same diameter as PTFE tubing, and was preventing me from threading my PC4-M10 fitting. I removed the center post similar to…

Pobrania
256
Polubienia
33
Ocena
5
P
PrintablesFilgy

JSN-SR04T ultrasonic sensor lid mount for IBC water tank

This mount is used for mounting JSN-SR04T water level ultrasonic sensor on top of the IBC lid.

Pobrania
247
Polubienia
19
Ocena
0
P
Printablesnero82

Philips Hue motion sensor mount

Here I have created a small angled mount for Philips Hue motion sensors. The mount is meant to be used together with the original mount. It should be possible to fix it with a screw or some kind of glue. For my picture I used an adhesive…

Pobrania
238
Polubienia
21
Ocena
5
P
Printablesszonet
Pobrania
228
Polubienia
47
Ocena
5
P
Printablestimn

Gas meter inductive sensor holder G4 RF1 c

This is a remix of the holder for an inductive sensor on a Pipersberg G4 RF1 c . It is used for an 18mm sensor with which I got more stable readings. It also comes with a thicker bolt that fits more tightly in the little cavity. I have…

Pobrania
221
Polubienia
4
Ocena
5
P
Printablesewr2san

Adafruit Stemma Capacitive Soil Sensor Cover for IoT Garden

A sensor cover for the Adafruit Stemma Soil Sensor: https://www.adafruit.com/product/4026 Snaps Together nicely no glue needed. I print in PETg for outdoor durability. Logo on top (for those of you wondering) is for Team 4160 for which I…

Pobrania
212
Polubienia
17
Ocena
4
P
PrintablesSimonSchober

ClockworkPi uConsole Display Cover

I did not find any display cover for my uConsole that I liked, so I created my own. V1 is a bit more rigid than V0, if you need that. There should be enough space to access USB interfaces with the cover on. Print it with the top side…

Pobrania
210
Polubienia
21
Ocena
5

ID.4 center console tray

Same as the original, I just put it on a diet.

Pobrania
209
Polubienia
16
Ocena
5
P
Printables3DJG

Leaf sensory tray

Toy. Sensory tray for kids. Additionally, I have included the .bgcode file with my two-color print setup, with manual color change, as seen in the photos.

Pobrania
206
Polubienia
45
Ocena
5
P
PrintablesPatrick Hemmes

BMW E46 Center console bin with retractable charger.

BMW E46 Center console bin with retractable charger. Extra things you need: Sandpaper/paint if you want to make it need. Retractable unit from a retractable 12v car charger from Aliexpress.…

Pobrania
204
Polubienia
23
Ocena
0
P
PrintablesYetti

ESP32 Wroom Case with Sensor SHT31

Simple Case for ESP32 Wroom with SHT31 Sensor with honeycom Lid No Glue and no Screws needed Just plug it together, you just need to solder the ESP32 and SHT31 To put it on the Wall you need only double-sided tape. The Sensor should be on…

Pobrania
203
Polubienia
17
Ocena
0
P
Printablescbearman

Console for Elecrow 5" HDMI Touchscreen and Raspberry PI

A mount for Elecrow 5" touch display for raspberry pi ( https://www.amazon.com/dp/B07FDYXPT7 ) suitable for use with octoprint/octodash or other purposes. This is a remix of my console for the Adafruit 5" touchscreen with mounting points…

Pobrania
185
Polubienia
11
Ocena
0
P
Printables3DJG

Flower sensory tray

Toy. Sensory tray for kids. Choose the model you like best.

Pobrania
184
Polubienia
46
Ocena
5
P
Printablesisaacramirezd

HC-SR04 ultrasonic sensor, wall support

This supports are designed to hold the HC-SR04 ultrasonic sensors to the wall. It is ideal for monitoring the level of your tnaks or your wells. The two pieces are holded together with two screws and the cable of the sensors passes…

Pobrania
183
Polubienia
19
Ocena
5
P
PrintablesCatniped

HC-SR04 ultrasonic sensor holder for ORP

an open robotics platform ( https://openroboticplatform.com/ ) compatible holder for the HC-SR04 ultrasonic sensor. attaches with 2 M3 flatheaded screws (height of the head of the screw should be around 2mm). sensor is easy to mount,…

Pobrania
181
Polubienia
9
Ocena
0
P
PrintablesAkatore

STC-1000 Temperature Sensor Clip

A clip to securely hold a standard STC-1000 temperature sensor in place. Can be attached to any surface using a Command removable strip or double-sided tape. Infill: 100%

Pobrania
180
Polubienia
22
Ocena
0
P
Printableszefer

ESP32 D1 Mini BME280 IoT sensor case

This is a small case that snugly fits an AZ-Delivery ESP32 D1 Mini board. The lid is designed to mount an external BME280 or BMP280 sensor board, although this is optional. It has been designed and printed as part of this project:…

Pobrania
163
Polubienia
10
Ocena
0
P
Printablesrkemendi

Soil moisture sensor case

Soil moisture sensor case for the sensor in the images. The case will require to m2/m2.5 screws to fix the board. The top case will fit snug, you will need to gently press it in 2-3 times. You can find the Tinkercad model here Print…

Pobrania
159
Polubienia
13
Ocena
5
P
PrintablesErik

Water meter inductive sensor bracket

This part fits on water meters with two screw pillars on the glass. One side has a slotted hole so the offset of the induction sensor to the pointer can be adjusted. For my water meter (Kiwa sensus) the center to center distance of the…

Pobrania
158
Polubienia
21
Ocena
4
P
PrintablesHarsesis

Rear Mount for Prusa XL Filament Sensor - Remix

When trying to use the original model from kez I faced the problem that my M3 nuts where to small for the internal openings. This caused them to spin, when I tried to tighten the screws. I created this remix with tighter tolerances to fix…

Pobrania
156
Polubienia
51
Ocena
5
P
Printablesfonzy

Z belt tensioner w. filament sensor bracket Ender 3 V3 KE

Movable z axis belt tensioner added bracket for filament sensor for Ender 3 V3 KE original screws can be used - cannot be used together with the original spool holder!!! Required parts: 1x M3 x 12mm 1x M5 Washer 2x F695 Bearings 2 parts -…

Pobrania
151
Polubienia
49
Ocena
3
P
Printables3DJG

Pumpkin sensory tray

Toy. Sensory tray for kids.

Pobrania
150
Polubienia
38
Ocena
5
P
PrintablesDave

Wii sensor bar clip for skinny TVs

Quick print clips to hold your Wii sensor bar on your new fancy skinny TV. Includes an OpenSCAD file you can customize to make your own. Also included STLs for TVs 5mm - 10mm thick (in 1mm increments) and 4.2mm which is perfect for an LG…

Pobrania
149
Polubienia
15
Ocena
0
P
Printablesxenon

XL Filament Sensor - reduced force

the force required to insert filaments through the sidemounted filament sensor didnt agree with me so i reduced the spring compression by 1mm. reducing it more will become problematic for the center filament. integrated filament numbers…

Pobrania
148
Polubienia
23
Ocena
5
P
Printables3dprints4life

Shelf Bracket Drywall Construction / Konsole - Regalhalter Trockenbauwand 17cm x 17cm

EN: The bracket is suitable for mounting 20 cm wide shelves on drywalls. M5 dowels can be used as cavity dowels. The hole can be subsequently extended for larger M6 dowels. If you like my model(s) please leave me a like to support my…

Pobrania
140
Polubienia
18
Ocena
5
P
Printables3DJG

Butterfly sensory tray

Toy. Sensory tray for kids.

Pobrania
139
Polubienia
31
Ocena
5

Sensory play molds with stamps (flexible hinge)

The cubes measure 4×4×4 cm. There are 2 pictures on each cube that you can use to stamp into modeling clay or kinetic sand. Inside there are molds for different objects. The cube develops fine motor skills, vocabulary (create stories),…

Pobrania
135
Polubienia
48
Ocena
0
P
PrintablesAnotherBrain

Filament Sensor Mount for Prusa Mini Enclosure

This should solve the issue, that the filament sensor get stuck in the master spool. Also the Filament changing doesn't get more complicated. You need: PTFETubeMountingBreaket Original PTFE tube of the Prusa Mini 2x M3 nuts 2x M3x8mm…

Pobrania
134
Polubienia
33
Ocena
4,89
P
Printableskonseben

Audi A3 Center Console Wireless/Qi Charger

I made this model for my girlfriends Audi A3. Her car came without the integrated wireless charger, so I made a model to add one. She has a Huawei Mate 20 Pro with a protective case. You need: 1x Audi A3 8Y (GF has sportsback variant,…

Pobrania
128
Polubienia
18
Ocena
0
P
PrintablesPeter Farell

Brad Johnson From Accounts Receivable

Brad Johnson From Accounts Receivable. But his friends call him Phineas. Very popular at office parties due to the fact that he has a pipe dissecting right through the middle of his head. Its become somewhat of an initiation right for…

Pobrania
126
Polubienia
32
Ocena
0
P
Printablescodysechelski

Touch Sensor Case

I needed a simple touch sensor case. I probably over-engineered it a bit, but I really wanted most of the “touchable” surfaces to be printed on the bed so they had a nice finish to them. I also knew that I would be using Dupont connectors…

Pobrania
122
Polubienia
9
Ocena
5
P
Printables3DJG

Ladybug sensory tray

Toy. Sensory tray for kids.

Pobrania
122
Polubienia
25
Ocena
0
P
PrintablesKrennW

Code for Heater with AutoOff, AutoHum, Second Sensor, Fan-Control, LED-Control, Color Labeld Display. Bracket X with place for second and third Mosfet

The files are made for a MMU3 (here with MK4) Whereas the Chars (I|O, + and -) are changeable Also the used Extruder, here Main (Display 1) = 3, I|O, + and - = 1 Bracket X for place for two additional mosfet (fan and Led strip) There is…

Pobrania
119
Polubienia
25
Ocena
5
P
PrintablesAlejandro

HEX ICE Scraper with temperature and humidity sensor.

I have modified the HEX Scraper to accommodate a standard temperature and humidity sensor. With this scraper you can know the temperature and humidity outside or inside the car. It is a standard temperature and humidity sensor that can be…

Pobrania
116
Polubienia
32
Ocena
0
P
Printablessythys

8mm Ball, MK3 Filament sensor SteelBall replacement

Resizing of the Ball may be Needed to ensure clearence. The Example gcode resizes the ball to 7.3mm diameter and splits it in to two halves. There is a Square Connector, no glue needed. The Example Gcode disables Elephant foot…

Pobrania
115
Polubienia
1
Ocena
0
P
PrintablesLC-3D

HC-SR04 distance sensor mount for Joy-It robot car

For a school project we are using the Joy-It robot car. On this car we have to mount 2 HC-SR04's. I did this with the help of this (self-made) model. As you can see the sensor fits perfectly in the mounting piece and the mounting piece…

Pobrania
115
Polubienia
7
Ocena
0
P
PrintablesJC

Havis console mounting Motorola APX-8500 Mobile Remote Head Mount (Dodge Durango Pursuit)

Havis console mounting Motorola APX-8500 Mobile Remote Head Mount UPDATED POST size requested per @SeanOConnor_5174100 I modified the 3" deep version to 2.5". I have not printed it, but it should work fine. The 2.5" version is named with…

Pobrania
113
Polubienia
12
Ocena
5
P
Printablesbmontini

PORT NUMBERS IN ORDER! Prusa XL Filament Sensor x6 (magnetic / weaker) w/ PC4-M10 fittings & PrusaSlicer text, **Wiring Change Required

YOU MUST SWAP SOME WIRES FOR THIS TO WORK!!!! THIS FILE USES A CUSTOM FONT: HELVETICA NEUE (similar to prusa font) Install it before opening FILE!! THE MODEL WILL WORK IF YOU CHOOSE TO KEEP THE SPRINGS IN THE SENSORS AND NOT ADD MAGNETS I…

Pobrania
109
Polubienia
61
Ocena
5
P
PrintablesSanta Fe Bruce

Logitech MX Creative Console Holder

This model is designed to keep the Logitech MX Creative Console Dial and Keypad in a firm relationship. It provides a very stable platform for the Keypad making selections more positive. I also added Harbor Freight toolbox drawer liner to…

Pobrania
109
Polubienia
17
Ocena
0
P
Printablesphillycheeseman

JSN-SR04T Sensor Mount

JSN-SR04T Sensor Mount v11

Pobrania
106
Polubienia
3
Ocena
0
P
PrintablesRobertusMaximus

Armoured Transorbital Shuttle MKII

Armoured Transorbital Shuttle MKII Because there's no place like home, be it a Megalopolis with 80 billion souls, Hum'ahn, Alien, or otherwise. But something's got to get you out of orbit. And they are not landing a massive starship for…

Pobrania
101
Polubienia
22
Ocena
0
P
Printablessilasborowy

Pipersberg Gaszähler Sensor Halterung

Mit diesem Druck kann ein Magnetsensor optisch ansprechend an einem Pipersberg G4 Gaszähler befestigt werden. Der Druck enthält eine Mulde im Boden, die mittig über der zweiten Nachkommastelle angeordnet ist. Um den Zähler auszulesen muss…

Pobrania
100
Polubienia
6
Ocena
5
P
PrintablesCory Malone

Nissan Note parking sensor blanking plates

Add supports, printed with Esun PLA

Pobrania
96
Polubienia
11
Ocena
0

Sensory play stamp cubes: Alphabet and Numbers

The stamp cubes measure 4×4×4 cm. There are 6 letters or numbers on each cube that you can use to stamp into modeling clay or kinetic sand. The cube develops fine motor skills, and helps the children when they start learning to count,…

Pobrania
93
Polubienia
31
Ocena
5

SwitchBot Contact Sensor Mount for Garage Door

Attach a SwitchBot Contact Sensor to your Garage door with the use of these 2 brackets.

Pobrania
93
Polubienia
13
Ocena
0
P
PrintablesModellbau D

lamp-base for bottle / Lampensockel für Flasche

base for your rum /whisky /vodka bottle. I used round LEDs with a diameter of 70mm.

Pobrania
93
Polubienia
21
Ocena
0
P
Printableszollda

Xiaomi Temperature Outdoor Sensor cover

Weather resistant case for Xiaomi Temperature sensor, so you can use the sensor outside. Just stick it to the window. Print instructions No support needed.

Pobrania
91
Polubienia
10
Ocena
5
P
PrintablesMartin v R

Ender 3 V3 SE/KE Reverse Bowden + filament sensor mount

Original part flipped, notched for gantry support, added a hole for a ty-rap and made a mounting plate for a Creality filament sensor. Just mark the sensor mounting holes, drill them, and insert heat inserts. Or drill small holes and use…

Pobrania
90
Polubienia
16
Ocena
5
P
PrintablesMultisystem

MiSTer Multisystem2 Slice Tray FPGA based retrogaming console enclosure

This is the MiSTer Multisystem2 Slice tray (Expansion module) enclosure. For printing the enclosure sections, please see images, they do not require any support material to be enabled, everything is orientated to print without support.…

Pobrania
84
Polubienia
11
Ocena
0
P
PrintablesTony3670

ultrasonicsensor arduino hc-sr04 mount/holder

hc-sr04 sensor compatible with an arduino It's easy to attach the model to a contruction with bolt and nut or screws. No specefic printing instruction needed.

Pobrania
84
Polubienia
0
Ocena
0
P
Printables3DJG

Squirrel sensory tray

Toy. Sensory tray for kids.

Pobrania
83
Polubienia
27
Ocena
5
P
Printablesgeokscott

Ultrasonic outdoor sensor JSN-SR04T and waterproof DS18B20 digital temperature sensor

This is a mounting bracket that holds a JSN-SR04T ultrasonic sensor and waterproof DS18B20 temperature sensor for mounting to a 1" square tube. This is part of a project to measure the water level of a creek. The sensor will be extended…

Pobrania
83
Polubienia
5
Ocena
0
P
PrintablesLudi

Ioniq 5 N-Line 2025 Box für die Mittelkonsole

Box für die Mittelkonsole im neuen Ioniq5 N-Line zum aufbewahren der Ladekarten und Euro Münzen. Gedruckt mit XPETG matt von Extrudr mit einer Schichthöhe von 0,1mm damit kein Stützmaterial benötigt wird. Die Einleger sind mit TPU…

Pobrania
78
Polubienia
11
Ocena
0
P
PrintablesMic

Philips Hue Outdoor Sensor Wedge

Allows you to mount the Philips Hue Outdoor at an slight angle. You can use the original screws to mount it to the wedge. The wedge itself has two screw holes with a diameter of 4mm

Pobrania
74
Polubienia
10
Ocena
5
P
PrintablesgrubFX

Wemos D1 18650 + MAX6675 Temp. sensor

I started this project trying to find a better way to measure the temperature of my Pizza oven than constantly having to open the front hatch and pointing an infrared laser at the stone. The following parts are used: Wemos D1 / ESP8266 /…

Pobrania
73
Polubienia
7
Ocena
0
P
PrintablesMr.KoiFish

Utrasonic sensor HC-SR04 holder

Hello, I'm uploading my own version of an ultrasonic HC-SR04 sensor holder. This design has a tight fit, so please be careful when inserting the sensor. To print, please place the gadget in the orientation shown in the photos. This will…

Pobrania
73
Polubienia
5
Ocena
0
P
PrintablesSilvenga

Zigbee Door Sensor Mount

A slightly over engineered mount for a TuYa TS0203 Zigbee door sensor - optimized to be mounted with screws (in my case, outdoors, on my fence gates). The top snaps onto the body, but is ultimately designed to work with screws. BOM A TuYa…

Pobrania
73
Polubienia
15
Ocena
4,5

Sensorgehäuse Sensorhalter Ultraschallsensor HC-SR04

Dieser hochwertig 3D-gedruckte Sensorhalter wurde speziell für den HC-SR04 Ultraschallsensor entwickelt und sorgt für eine sichere, stabile und passgenaue Befestigung in deinen DIY- und Elektronikprojekten. Ideal geeignet für den Einsatz…

Pobrania
72
Polubienia
9
Ocena
0
P
PrintablesOuwekaas

Aqara Temperature, Humidity and Presure sensor standard

A simpel stand so the sensor is not laying on something. Standard is tight fit and angle of 30 degrees. Easy print with supports. I used organic supports.

Pobrania
71
Polubienia
9
Ocena
5
P
Printablesfalkm

Tischkonsole für Steckdosenleiste

Tischkonsole für Steckdosenleiste (Brennenstuhl Premium-Line) für die Montage werden M3 Schrauben und Gewindeeinsätze benötigt.

Pobrania
69
Polubienia
7
Ocena
0
P
PrintablesMartinRowan

Gas Meter Sensor Mount

A holder for D-Z73 reed switch to attach non-invasively to an Actaris gas meter. The meter has two small raised posts which allows the mount to be press-fit into place. The reed switch is attached to an Aqara Zigbee magnetic door/window…

Pobrania
66
Polubienia
3
Ocena
5
P
PrintablesRobertusMaximus

Armoured Transorbital Shuttle

Armoured Transorbital Shuttle Because there's no place like home, be it a Megalopolis with 80 billion souls, Hum'ahn, Alien, or otherwise. But something's got to get you out of orbit. And they are not landing a massive starship for your…

Pobrania
64
Polubienia
8
Ocena
0
P
Printableswizhack

Bafang bbshd brake sensor mount tektro auriga comp

FR : Voici une cale qui permet de monter un capteur de frein magnétique fournis par bafang avec le bbshd (pour freins hydraulique) Tektro AURIGA comp qui était monter sur un vélo Btwin rockrider 520 de 2013/2014. Je l'ai dessiné car les…

Pobrania
63
Polubienia
5
Ocena
0
P
PrintablesMcDrucki

Bracket to attach Aqara motion sensor in verios ways

Bracket for attaching the Aqara motion sensor to the wall or to the included hook that fits on (my) stairwell. There is a recess in the hook for inserting a magnet.

Pobrania
61
Polubienia
2
Ocena
0
P
PrintablesDan Rogers

Filament runout sensor mount for Troodon 2.0 Pro - 3 different versions

I wanted to use my printer the day I set it up, and the printer did NOT ship with a filament runout sensor mount. Found one on printables, but it needed an added pneumatic adapter which I didn't have - so I remodeled it to just hold the…

Pobrania
60
Polubienia
6
Ocena
4
P
PrintablesDIY Machines

Sensorless Homing in Python - RP2040 | TMC2209

Use sensorless homing in your own projects! In this project and associate video I’ll show you how to set up sensorless homing using a TMC2209 stepper driver — no mechanical limit switches required! Perfect for 3D printers, CNC machines,…

Pobrania
59
Polubienia
16
Ocena
0