5499 modeli
I would like to introduce to you the 5th version of my wind-up boat. After the 4th version i got a lot of feedack on Facebook, which I have implemented as well as possible. As you can see there is a much larger wind-up weel. The boat can…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
So I love how many of us love the original benchy. The only thing I've always found a little pity it can't swim. Since I have drawn a few ships so far, I just wanted to try to draw a small, floating benchmark boat. Of course, it's not…
Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu
Are you new to Black Crow Prints? All the STL files are here free on Printables.com. A non printed parts list is below along with easy step by step assembly videos. Help is available, usually within 24hrs. You can contact me thru private…
Wydruk około 9,59 €–11,72 € nettoWstępna wycena jednego wariantu
This is a boat, that can swim over the water by help of a balloon! Put a balloon over the chimney and blow in the exhaust. Set the boat on top of water and release the "air hole". Have fun! Print instructions Category: Toys & Games Print…
Wydruk około 2,45 €–2,99 € nettoWstępna wycena jednego wariantu
I love these little boats! This time with dual drive! Now the boat goes much further, lasts longer and, above all, it finaly goes straight ahead! The drive spiral is made of PETG this time. This works much better than PLA. All parts are…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this float for a friend I made 12 for him out of the 12 he said that one of them let in a little water but he's still using it, it is made with a 5% infill and with PET-G you can change where you want the colour change in prusa…
Wydruk około 1,06 €–1,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple to print and detailed model of a small 1980's sailboat The “Oceaan 18" was made by K+S Polyboats in the netherlands. It's a small, sporty sailboat with a cabin big enough for 3 people. It's an inland vessel and not made for rough…
Wydruk około 0,49 €–0,59 € nettoWstępna wycena jednego wariantu
Summary Do you love Benchys but are frustrated because they don't float in water? Do you want to print your child a cool Benchy for the bathtub? Here is the stable floating Benchy with cargo containers, smoke and flag in a multicolor…
Wydruk około 1,66 €–2,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wegen het succes van mijn bootschroef met drie bladen heb ik er ook 1tje gemaakt met 5 bladen. Voor iedereen kan kan ik meerde of minder schroef bladen maken. Due to the success of my boat propeller with three blades, I also made one with…
Wydruk około 4,92 €–6,01 € nettoWstępna wycena jednego wariantu
I made this fishing float for a friend he tried it out then I got conned into making another 10 I used transparent for the bottom then white and then orange or yellow for the top all in PET-G with a 5% infill
Wydruk około 0,80 €–0,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hi, I just finished the rework of some kind of sump boat which I designed for my son. It just started with a simple idea of having our Traxxas Blast boat modified a little bit but it ended with 26 parts for the boat itself, 9 parts for a…
Wydruk około 3,42 €–4,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wegen het succes van mijn bootschroef met drie bladen heb ik er ook 1tje gemaakt met 4 bladen. Due to the success of my boat propeller with three blades, I also made one with 4 blades.
Wydruk około 3,95 €–4,83 € nettoWstępna wycena jednego wariantu
Model of inflatable Heavy-Duty Boat
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
This was designed as a greetings card but also suitable as a decoration or fridge magnet. The photo shows it printed using a generic white PLA bought from the Prusa shop.
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
A Coat Hook for mounting to walls or wooden beams. Quick and easy print with no supports.
In een vroegere post heb ik een rechtse geplaatst, na aanvraag een linkse nu met tekening en afmetingen. In an earlier post I placed a right one, after request a left one now with drawing and dimensions. Ludo
Wydruk około 3,74 €–4,57 € nettoWstępna wycena jednego wariantu
Ik heb de bootschroeven wat kleiner gemaakt, 60mm doormeter en 30mm hoog. Voor een as van 2mm, er zitten ook 2 gaatjes in om de as mechanisch vast te zetten. I made the boat propellers a bit smaller, 60mm in diameter and 30mm high. For a…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This speedboat floats upright with no change of infill and the hull is optimized for speed. This boat is also really stable when it is not moving or moving slowly because how how the hull is designed. This model does require support. The…
Wydruk około 2,59 €–3,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Keep all your fishing gear organized in your kayak or boat. Space for Pliers, hooks, lures, traces and more. Should ideally be printed using PETG but I used PLA because I haven't quite mastered PETG settings. I included holes for Bungee…
Wydruk około 13,29 €–16,25 € nettoWstępna wycena jednego wariantu
Hi As a big thanks to Everyday Astronaut for the many interesting videos to us people who love space, I created his logo as a kind of 3D coat of arms. Is one of the most ambitious and complex projects I have done so far. I have not only…
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
A hanger made for standard cubical walls with a larger hook than is provided in most offices. Strong enough to hold a backpack or purse using just 9g of filament.
Wydruk około 0,81 €–0,98 € nettoWstępna wycena jednego wariantu
It actually needs work for top performance.
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
A Mirror Dinghy sailing boat. Easily adapted and scaled for different purposes. Designed for greetings cards, but includes a hole to hang on Christmas tree or as a decoration. Printed in 2 colours for contrast, but could easily be printed…
Wydruk około 1,06 €–1,30 € nettoWstępna wycena jednego wariantu
Model of inflatable Heavy-Duty Boat powered by a rubberband.
Wydruk około 1,84 €–2,25 € nettoWstępna wycena jednego wariantu
Printed in Wood PLA Used Parameter: Perimenter: 3 Infill: Gyroid (15%)
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
Designed for 2 colour printing. I only had close colours in PLA (Gold Silk and Prusa Azure Blue) When my PETG arrives, I will reprint! The model is derived from my design for CNC machined grip panels, which are commercial.
Wydruk około 2,28 €–2,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fox Float Travel spacer for Fox forks, taken from 2012 model FOX36. 10mm and 20mm spacer models. check https://www.ridefox.com/fox_tech_center/owners_manuals/012/index.html how to change travel on your Fox float fork
Wydruk około 0,60 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Summary This is the a realistic and stable floating container ship fully compatible with Lego Duplo. Key features - Very stable floating container ship with good water holding - Floats well even with a full load (see pictures) - fully…
Wydruk około 2,58 €–3,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Control3d Black PLA+ Esun Bone White PLA Control3d White Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Bone White At…
Wydruk około 6,78 €–8,29 € nettoWstępna wycena jednego wariantu
This is the final prototype for the Arduino RC boat project. This boat has slots in the aft section for a micro electric motor and two 9v batteries. The aft cover is designed for use with a micro servo. The Arduino will control the motor…
Wydruk około 0,93 €–1,13 € nettoWstępna wycena jednego wariantu
UA Coat of arms, larger version, check dimmension pictures for exact dimmension of file, on the emblem is used small filet to enhance plastic effect. Scaling in slicer should work well also. Color change happening in 6,20 height, included…
Wydruk około 1,87 €–2,28 € nettoWstępna wycena jednego wariantu
The model prints best on its aft, since that was how it was designed to print. With the walls being so thin, extra perimeters are probably better than infill. There are two versions, one with a watermark and one without.
Wydruk około 2,28 €–2,78 € nettoWstępna wycena jednego wariantu
This Can and Phone Holder is designed to fit a can with a koozie <85mm. The phone holder slot is also 85mm in length and 15mm in width. It fits my Samsung Galaxy A32 with the case perfectly. My print of this variant of the design was done…
Wydruk około 5,50 €–6,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a quick and urgent design of a can holder for the Intex inflatable boats, which have an fishing rod holder. The “unique holder” was created for the Intex Seahwak 3 and tested on the a river and works great for can with a maximal…
Wydruk około 4,70 €–5,74 € nettoWstępna wycena jednego wariantu
No need for Supports. I printed it with PLA. I would recommend to print the Twist-Clips with PETG.
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
I added a PrintABlok Connector to the floater because the PETG parts were very difficult to glue together. So there is no need to glue the parts. Just put them together.
Wydruk około 1,07 €–1,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To say that my significant other loves goats would be a pretty serious understatement. These goat bookmarks are just a fun little item to put a little smile on your face every time you pick up your book. We have pet fainting goats, so as…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
This is a chess game that you can take with you when taking a bath. The board consists of buoys. They are connected but still can move freely so it's ok to make some waves 😅 The board, with all pieces connected, is 62 x 62cm (24.4 x 24.4…
Wydruk około 2,77 €–3,38 € nettoWstępna wycena jednego wariantu
Das niedersächsische Wappen - durch Konvertierung des originalen, zweidimensionalen Wappens und minimale Vereinfachung (Schattenschraffur des Pferdes) erstellt. Als einfaches Wappen oder als Schlüsselanhänger. The Coat of Arms for Lower…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Aboxman's model only had the STL on it, so in order to extend it out for thicker cubical walls, I had to re-engineer it by printing his STL and making a lot of measurements. To save anyone else the trouble in the future for other mods, I…
Wydruk około 2,97 €–3,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dies ist ein Boot, das mit Hilfe eines Ballons über das Wasser schwimmen kann! Legen Sie einen Ballon über beide Schornsteine. Stellen Sie das Boot auf das Wasser und lassen Sie das "Luftloch" frei. Viel Spass! Anleitung drucken…
Wydruk około 1,96 €–2,40 € nettoWstępna wycena jednego wariantu
Just a very strong coat hook for wall mounting
Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu
Modified to work with the picture hanging Velcro Command strips. *Warning don't use with non-Velcro strips
Wydruk około 0,63 €–0,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Support pour Moteur 20GA130-60-12v pour bâteau RC. Le pdf contient le lien Tinkercad.
Wydruk około 1,14 €–1,40 € nettoWstępna wycena jednego wariantu
I found the 25 mm length x 15 mm width best adapted. Printed in blue and yellow PLA without MMU. Used to fix a brokken zipper. A nice way to show support to Ukraine ! Imprimé en PLA bleu et jaune sans MMU, aux dimensions 25 x 15 mm pour…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
For best results place face down on build plate mmu required I will allow prints to be sold if profits are donated to help Ukraine
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
This is a notched trowel for the final hard coat of an epoxy table. Made with 1/8" x 1/8" grooves for a smooth and level finish coat. I couldn't find one out in town made of a softer material (don't want a metal one that might leave…
Wydruk około 1,92 €–2,34 € nettoWstępna wycena jednego wariantu
This coat of arms of the city of Cracow was designed as a tactile graphics for blind people, but can obviously find far more applications. How to print We strongly advise to print it vertically to make all elements smooth, eagle…
Wydruk około 16,63 €–20,32 € nettoWstępna wycena jednego wariantu
As the GOATA Chucks are way to expensive for me, I decided to 3D print them. The dimensions are: 10cm by 10cm by 3cm. There are two variants: Normal and Grippy one, the normal one has a flat surface whereas the grippy one has small dots…
Wydruk około 2,55 €–3,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is used to replace the Jet throat plate for a band saw.
Wydruk około 0,54 €–0,65 € nettoWstępna wycena jednego wariantu
This is a simple double hook/hanger, that has enough enhancements not to break, for a coat and a handbag. Hang it on top of a door or an office divider. Make sure you have clearance above the door to the door frame, if you need to close…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
EN: The funnel (for throat diameters min. 30mm) has a float gauge in the middle, which indicates the fill level while the liquid is being poured. This is useful where it is not easy to see inside, for example when pouring petrol into the…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This fits a Grizzly G0555 bandsaw but can likely be adapted for others as well. The parameterized Fusion model is included.
Wydruk około 0,49 €–0,59 € nettoWstępna wycena jednego wariantu
Designed to fit over the top of a cubicle wall. Total of four hooks, two on each side of the wall. Now in two sizes - choose the one closest to the thickness of your cubicle wall: 55 mm 48 mm Recommended print settings: Material: PLA…
Wydruk około 3,21 €–3,92 € nettoWstępna wycena jednego wariantu
A 3d model of Portugal's official Coat of Arms with an extra handle so it can be used as a keychain. I really like the coat of arms thats present in the flag but didnt really find any model already present besides the medieval(very…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
Update 2026-09-08 I added a slightly bigger version of the hook I needed to hang the outdoor lights. Normally I use a ladder to do this. I realised that we have a Leifheit telescope handle (Nr 41523, 135 - 400 cm) that we use to clean…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Use 3 walls. A compact hanger attachment designed for organizing belts directly on a standard coat hanger. The connector attaches to the hanger hook area and provides space for up to 4 belts, helping save closet space while keeping…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
Yes, I know, totally over-engineered, glorious isn't it! I have grown a few avocado's from the nut, each time I have had problems with the root system getting stuck in the support ring, even on two-piece avocado floats. The solution -…
Wydruk około 3,22 €–3,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Needed a coat hanger for my work cubicle and the mounting holes were there and just begging for a hook. Printed in PLA, 3 perimeters, 20% cubic infill. Has held up so far.
Wydruk około 3,82 €–4,67 € nettoWstępna wycena jednego wariantu
This coat of arms of the city of Kielce was designed as a tactile graphics for blind people, but can obviously find far more applications. How to print No rafts or supports needed. Print in any scale.
Wydruk około 8,14 €–9,95 € nettoWstępna wycena jednego wariantu
By turning the arrow in the direction of the wind you can see from which direction you have to approach (ship).
Wydruk około 0,13 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This coat of arms of the city of Katowice was designed as a tactile graphics for blind people, but can obviously find far more applications. How to print No rafts or supports needed. Print in any scale.
Wydruk około 11,98 €–14,64 € nettoWstępna wycena jednego wariantu
The piston on the boat's manual toilet pump broke and the pump stopped working. Because I couldn't find the spare part in stock and I was forced to buy the complete pump, I decided to design and 3D print the piston I needed to repair the…
Wydruk około 2,37 €–2,90 € nettoWstępna wycena jednego wariantu
This coat of arms of Warsaw (the capital city of Poland) was designed as a tactile graphics for blind people, but can obviously find far more applications. How to print No rafts or supports needed. Print in any scale. Printing vertically…
Wydruk około 5,64 €–6,90 € nettoWstępna wycena jednego wariantu
I took an already great model by Line Arc Line that I have used extensively throughout my home and welding shop, and made it a single version as a great way to hang and display my welding helmets. I used Matter 3D Matte Black PLA at…
Wydruk około 1,11 €–1,35 € nettoWstępna wycena jednego wariantu
The badge case by @dynom took 3hr to print on my Prusa MK4, so I designed a flatter one that I can print quicker to get more cases to more people. Built for speed not for comfort. You may be interested in my protected 18500 battery adapters
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
Om dat mijn vrouw zoveel broeksriemen heeft, maak ik er kapstok voor. Je kan het ook gebruiken voor stropdassen. groeten Ludo Because my wife has so many belts, I make a coat rack for it. You can also use it for ties. regards ludo
Wydruk około 1,53 €–1,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ok, so I'm very new to modeling in general, but specifically to remixing. If you try to slice this at 0.2, the original design will show through. I printed mine in PETG, but only because I wanted it to match the rest of my printer. PLA…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
-Englisch- As you can see in the photos, the original water level float is partly made of porous plastic. Over time, unappetizing residues are deposited on this plastic, which can no longer be removed. That's why I designed a new water…
Wydruk około 1,23 €–1,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Clothes hook has been lengthened, as this saves more space when the jacket shoulders are lower underneath each other. This suits my needs better. I hope others will too. Kleiderhaken wurde verlängert, da dadurch mehr Platz eingespart…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
It gets too hot in my boat for my black labrador when the sun is right overhead. I saw a nice canopy that is the right size, the kind that uses flexible poles for pop-up canopy - but it is made to mount to that brands raised pet bed…
Wydruk około 1,33 €–1,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This coat of arms of the city of Gdynia was designed as a tactile graphics for blind people, but can obviously find far more applications. How to print No rafts or supports needed. Print in any scale.
Wydruk około 6,98 €–8,53 € nettoWstępna wycena jednego wariantu
I wanted to celebrate the start of summer with a new model! I decided to try out make a swan floatie as a trinket dish. Print flat with some support under the head. MMU 3MF included Category: Sculptures
Wydruk około 2,23 €–2,73 € nettoWstępna wycena jednego wariantu
This is a minimalist, space-saving soap dish designed for a neat, "zero-footprint" bathroom setup. Instead of taking up valuable counter space, it hangs discreetly on the neck of a wall-mounted faucet, allowing any excess water to drip…
Wydruk około 9,27 €–11,33 € nettoWstępna wycena jednego wariantu
Om aan de kast deur te hangen. Om dat mijn vrouw zoveel broeksriemen heeft, maak ik er kapstok voor. Je kan het ook gebruiken voor stropdassen. groeten Ludo To hang on the closet door. Because my wife has so many belts, I make a coat rack…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
100x160mm sign, reads “powerful enough to turn goat piss into gasoline”. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs…
Wydruk około 1,81 €–2,22 € nettoWstępna wycena jednego wariantu
This coat of arms of the city of Żmigród was designed as a tactile graphics for blind people, but can obviously find far more applications. How to print We strongly advise to print it vertically to make the dragon and other elements…
Wydruk około 12,30 €–15,03 € nettoWstępna wycena jednego wariantu
Created and printed a long time ago ( 4 years ), very reliable does not move even in PLA.
Wydruk około 0,92 €–1,12 € nettoWstępna wycena jednego wariantu
Main Body There are 3 different versions available of the root irrigator. One with a short neck, one with a medium neck and one with a long neck. All of those are freely scalable and will work with the accessories (float gauge & cover).…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Balboa Racing iStart is a common fixture in small boat racing. Having used one both coaching, and in community sailing programs, I've also had to service a few of them. Batteries are intended to be “replaceable” by the manufacturer,…
Wydruk około 13,01 €–15,90 € nettoWstępna wycena jednego wariantu
Printed in Prusament PETG, 0.4mm nozzle, 0.20 mm layer height. To avoid using any support, here is the method I used : On your slicer, cut the model into 2 parts : the outer rim and the basket grid print them in one row glue the 2 parts…
Wydruk około 4,51 €–5,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
modification pour mettre une bague de roulement en laiton
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
Hose Couplings for Air ¼'' male fitting threads into bottom use clay, playdough, or rubber gasket around edge contacting boat use thread tape on print between air fitting apply soapy water to boat or welds in question apply printed nozzle…
Wydruk około 5,46 €–6,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Floatplane Firefox Fentanyl This bit from the most recent wan show had me dying for hours and I wrote in my notes that night that I should make into a small desk sign, This 4inch (H) by 6 inch (L) by 1 inch (W) has to be a good gag item…
Wydruk około 4,52 €–5,52 € nettoWstępna wycena jednego wariantu
V2 IS HERE: https://www.printables.com/model/1152427-openvessel-20-a-practical-3d-printing-benchmark Introducing OpenVessel , a model designed from scratch to embody the true spirit of 3D printing: freedom, openness, and community.…
I designed this upgraded Bag Coat Hanger (Heavy Duty Version) as an upgrade to my original design. Like the original model this version has been designed to be an easy support free print as long as you orientate it as shown in the bed…
3DBoaty is a 3D model designed for testing 3D printers. It's a small model, only taking 16.5 grams of material to print. There is also a scoresheet to measure how good your Boaty came out and compare it with others. Step file Included…
If you like this model, please follow my profile - it will help me a lot 😎 TwinJet Speedboat is a lightweight, balloon-powered water toy designed for quick, repeatable launches. The first two gallery images are visualizations created…
No more toothpicks and refilling the water every day! With this floating grower, the avocado seed will stay submerged evenly for weeks! As the water evaporates, the floater will simply go down with the water level. Once the avocado is…
My first bathtub boat so that young and old captains can play in their own bathtub
Upright-floating plastic ducks. each duck file comes with a different set of accessories (some accessories may affect ability to float upright) all files are designed to be printable without supports. Recommended settings for default…
***NEW NOTE: Hey everyone, please stop reporting to me that someone is selling prints of this design. See the licensing at the bottom – commercial use is freely allowed. The original was by Happy Moon, who licensed it like that (and I do…
I stretched the duck width-wise to make it wider and more stable in the water. I think it also looks better this way since most rubber ducks I've seen are quite wide and look almost round from above. The attached 3mf file is prepped with…
I designed this Bag Coat Hanger to carry on with my wardrobe organisation as we have too many bags in the house that are always in the way. This is a simple self-supporting print that requires no supports if you orientate the part as…
if you download this thing you can now test your 3d printer and see if you need to fix or just want ti print it! :)
Simple coat hook mounted with two screws (ø3.5 mm, holes distance 20 mm) Update: Added bigger version of double coat hook and one single hook version. Both models have same holes positions and distance so they can be replaced using same…
I designed this double coat hook with an added strengthening rib running through the centre of the part to add extra wall loops inside the hook. This is the same feature I've added to previous models I designed to increase their strength.…
Remix to remove the top half of the back honeycomb to give a 'floating' look and to double the stability while hiding the nails better Print one frame piece and two side grills (Preferably in an accent color) Don't forget to resize the…
11/22/22 update: If you are interested by RC boats check my other design at https://www.printables.com/model/322399-zryw-1-an-hydrofoil-rc-passenger-boat ------------------------------------------ This is a project I did in 2021. I'd been…
I designed this to organise my wardrobe and create more space. If you want to do the same you may also want to check out my other models in this collection. Bag Coat Hanger (Smaller Hook) by SD-3D | Download free STL model |…
