Liczymy pasujące modele…
Nearly 50% Reduced Time and Plastic Plus Separate Models for Individual Tests All-In-One From 6h57m to 4h8m 44g of material to 23g of material Separate Model Print Times Diameter Test - 32m 25mm String Test - 28m XYZ Dimension Test - 39m…
organiser with grid pattern and removable separator 2024-05-18 update · uploaded a simple lid, to meet a request photos show printed in black matte pla and brick red petg-cf 0.20mm layer height 10% adaptive cubic infill dimensions > x:…
Easy to print tool for separating stubborn Lego bricks. Supports needed. Good accuracy is required to produce Lego compatible bricks, please read this troubleshooting guide if you're struggling to get the bricks to stick together.
24/01/26 - V2 DEFINITIVE UPDATE Is buying a KO MP10 off aliexpress too easy for you? Do you already own every single iteration of this mold? Do you want to be a god? Thanks to the amazing updated original file by Petergross3, I'm proud to…
January 31-2025 Version 4.1 released! Version 4.1 is released! minor mods and tweaks! November 26- 2024 Version 4 release! (note - v3 and v4 lower cone is the same(NOT V4.1!!) , only the upper inlet/outlet section is new so you can reuse…
This construction is a logical continuation of one of the first options. The community likes it, apparently because of its low profile. It seems more stable. Our friend Der_Rudi asked to increase the gap for better throughput. Now it's…
Use a toothpick to attach the top crystal Make sure to add proper supports for the bow tie or use the included 3mf file Differences from the remixed model: Better looking top sim crystal, actually symmetric Fixed geometry in some places…
Hello guys!! I have optimized the wing components to enable better single color printing. I would like to acknowledge the fantastic work of the original designer and give credit for their initial creation. Specifically, I have separated…
I changed: • the location of the tail is moved lower; • the shape of the back handle; • my top handle (shape closer to anime); • my tail cord; • made a model of supports for the tongue, teeth and rear hole for the back handle. It is…
The translucent bins with little removable dividers are HORRIBLE when it comes to keeping parts separated. When closed, parts can jump between bins, which drives me CRAZY. This design intends to fix that. At the top of each wall is an…
Baby Deadpool is my first design where I'm offering separated parts along with the usual files. Just use our separated parts, slice, and print them. After printing, fit the parts in their place. If they feel a bit loose, you can use some…
Learn how positional vertigo works by watching the crystals (aka "otoconia" or "otolith") fall and move through the semicircular canals of your inner ear anatomy with this educational model. We developed this anatomical model to promote…
This is a remix of the original MIPRESIDENTE Iron Man Mark III helmet posted here on Thingiverse. My goal was to separate the model, orient in the best printing direction, do a little clean-up, and then publish them as ready-to-print. A…
Full credits goes to https://cults3d.com/en/3d-model/art/chicken-park-natcko I didn't want to paint this and I didn't manage to change filament color during print, so I just cut the original file in 4 new files. Just print each file in…
Version 3- new, even bigger and better cyclone dust separator! This is still a beta! thou it is fully functional! Assembly info and such will be added later, newer versions of the top cap may get uploaded ** note- will need a 300mm build…
The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates, Blender source file, and more detailed instructions. Go to my site for an overview of my other models . Only a few of…
Egg yolk separator for cup/jug sizes 4-7mm
It was printed with 0.6mm nozzle but smaller the better. I recommend using PETG, but it works with any prusament just fine. :D *updated: V2 version added
Model Overview This download includes two versions of the articulated Red Panda: Multi-part version designed for single-color printers with post-assembly . One-piece version designed for multi-color printers Multi-part version where u can…
Remixed the Annoying Gift Box by u: LittleCoolBomb : sized in mm. separated the lid from the threaded tie segment. provided split bow for easy, support-free printing. added clearances of 0.3 mm for the tie segments. provided a faster…
I split the katana and blade so that you can have the blade and handle different colours. Print instructions Print the blade first in the color of your choice. When slicing the Handle, add a "Color Change" in PrusaSlicer at 180mm just…
Need a custom adapter for your cyclone separator? Comment the required inlet and outlet dimensions and I’ll make and upload it for you. This 3D-printable cyclone separator efficiently removes dust and debris from your vacuum system —…
I re-created this model for Hamm, from Toy Story. It was made from scratch following some online images as references. This V2 model has the eyes and eyebrows separated so that you can print them in a different colour! To print I…
Bigger joints made to last, and easier to break free when using a larger nozzle. Or it can be made smaller with standard nozzles and still work. The earlier comments may be correct about some of the gaps being too wide, when printing…
English The 3D4U Valuables Separator. A versatile helper when it comes to separating large and small items. Whether you are vacuuming your kitchen drawers or a rucksack, looking for a lost earring in the carpet or vacuuming a pile of…
Check out a video about my project! I tried to use 3D printing to speed up production on a laser cutter. A simple cyclone separator that can be easily printed within 20 hours saves you money on bags and works amazingly well!
Background I set out to make this remix because all the other track clamps I printed and used would break at the same spot along the layer lines on the sides of the square pieces that interface with the tracks (see picture below). This…
For the massive weebs out there. This is a high quality, 1:1 accurate version of the Spy's Conniver's Kunai from Team fortress 2. Designed as a prop replica (not a weapon), that you can simply print and put together. full size : 34.6cm x…
💰You can obtain the commercial license for this model by joining my Patreon at the Merchant tier or higher. 🔔For the separated parts version: Please apply glue and gently press the parts together until they snap into place. If the fit…
Added a mounting hole for a nail/screw in the base and made sure the base of the head was actually flat. The original remix's head was slightly askew. Photo is printed at 200%. Category: Sculptures
Collapsing Katana all the parts separated. No vase mode Required.
It's a 0.15" hole, meant for a screw bushing I also added just the rail, [so that people could add the railing to their existing dust covers. It is a 0.15" hole with a 0.25"(width)x0.1"(depth) bore head] and just the dust cover
Added Three Layer STL's of each letter which can be joined in slicer or Tinkercad - the UPPER CASE letters are in a separate Post There are two(2) postings of this font face: Lower Case - Letters that can be attached 2. Cap Letters to be…
This is my rework of Prusa MMU2 PTFE Tubes Separator by fucosk https://www.thingiverse.com/thing:3166394 I just rounded off the corners a bit
For experienced makers. Remember this is a free file. Ready to get your socks sucked off? This is a handy dandy, print-it-yourself cyclone! If you are looking to upgrade your dust collection system, we highly recommend giving this design…
Coaster set remix
I absolutely LOVE the box design from @Jamie and really wanted a version with all small compartments of the same size. So I made it in TinkerCAD real quick. I've also included the 3 pieces in separate files, as well as a file with all 3…
A remix of IOI671701's Hornady Comparator Set Organizer Box . This box will hold: 5 headspace comparator inserts (A, B, C, D, E) 8 bullet comparator inserts 1 anvil 1 spare grub screw (under the anvil) 1 comparator body 1 1/16" hex key…
I separated the files as I too was looking for a couple of pieces out of this assortment the original creator made. I've included his original file in the STLs as well, most of files in the original seem to repeat so that is why there are…
Here at Vestibular First, we are excited to share our knowledge and passion for the anatomy that makes up the vestibular system! Combining this knowledge with technology is at the heart of our company. There are only a limited amount of…
I separated the teeth in blender for us peasants without a multicolor printer. Printed on my Ender 3 V2 NEO.
This is a remix of https://www.thingiverse.com/thing:3082571 to split the helm and facemask into separate pieces to allow printing in different colors.
When printing the beautiful original model by schiko in ASA, I experienced issues with layer separation - perhaps due to the cold environment, which prevented the build volume to heat up sufficiently. Nonetheless, I decided to do some…
This is a tool used by reloaders to perform CBTO measurements. This tool is compatible with the Hornady Lock-N-Load® O.A.L. Gauge. Commercial versions of this tool cost +50USD yet this version can be printed out for 1% the cost. I…
This is a fancy model of 8mm spark plug wire separator. It's fancy because there is a top and a bottom half, which fit within each other. Well printed, they should look like it's just one block. Also, there is no snapping/clipping…
Printed at .1mm layer height, 20% gyroid infill. I printed using the Bambu A1 AMS lite. The eye piece was printed using a brim and supports for where the eye goes into the head.
I had separated and resized the model by 3d_by_EB (from a design of IslandDan) to 66% to fit with Daleks printed for my niece. A workmate suggested adding a hole in the Angel's base for use on Christmas tree. Great work from original…
I absolutely LOVE the box design from @Jamie and really wanted a version with a few more large compartments. So I made it in TinkerCAD real quick. I've also included the 3 pieces in separate files, as well as a file with all 3 items in…
Spent a bit of time in Tinkercad splitting up parts and cleaning it up so that it can be printed separately in different colour filaments. The model itself is still massive, so be sure to change the scaling the same for each model if you…
Cash register sized for Sylvanian Families or Playmobil. The cash drawer is a separate part and it's possible to place at least 4 coins in the drawer. The coins are a bit oversized compared to the cash register but otherwise they would be…
💰You can access the commercial license anytime by joining my Patreon at the Merchant Tier or higher. However, the AMS multicolor version and the version without the keyhole of this model are only available for free by joining at the same…
This is my take on a dust separator for a shop vac. I built it around a 5 gallon bucket and lid, although you could use any container you want. I sized the couplers to handle a 2-1/2" hose (2-1/4 id on the hole) using a friction fit. That…
This is a remix of Keenan's great lantern model. I separated the the cross hatch panels in order to get a cleaner print. Otherwise the model is the same. If you want the model with the socket, download the base from the original.
Team Fortress 2, Engineer PDAs 1:1 accurate Designed as a prop replica that you can simply print and put together (glue required) Destruction: full size : 14.8cm x 9.8cm x 3.5cm The antenna extends and the button can be pushed via a…
I loved the PTFE separator from fucosk. [ https://www.thingiverse.com/thing:3166394 ] It held 5 tubes simply, was easy to print and looked good. I just wanted different configurations. Attached are variations of 2,3,4 & 6 tubes. (use…
Watch the Video here: https://youtu.be/Wf-8becReDs This is a quick Mega Man model I created in ZBrush as a final project to print on the 3D Printing Nerd's traveling gMax before we had to send it on. The files for this are a little rough…
Masterful Dungeons Tile Separator Tool is a small helper tool designed to assist with separating tiles when they are too tight to pull apart by hand. When tiles are new, the fit can be intentionally snug. This tool is meant to be used…
Cosplay Mask – Inspired by "Scream" (Ghostface) Note: Models labeled with the “Preview” prefix are meant solely for 3D viewing. These files are not suitable for printing, as they are low-poly and unsliced. All required printable models…
Turn your old plastic bags into a fun parachute for this paratrooper soldier! The model creates an entertaining outdoor toy for kids. , it requires supports for optimal results. For best durability, print with 45%–55% infill using PLA or…
osVAC conversion adapters for Dust Commander cyclone dust separator. With these adapters you can attach osVAC hoses directly to the Dust Commander. Also check out my osVAC pressure relief valve adapter. The female connector uses my osVAC…
All Parts like rings, lid and bowl separated and repaired for easy printing. All parts are separate STL file. All credits to original designer @3_D_Ideation .
Re sculpted this helmet based on the models from Jedi Fallen order. Feel free to use/modify/sell prints along as you credit me and link back to here. Just don't sell the file.
Small cyclone separato for 35mm vacuum cleaner tube. Use tape to glue the two parts together. Supports only on build plate for top part. No support for buttom part. Print Settings Printer Brand: MK3 Printer: Prusa i3 Supports: Yes…
Use super glue to connect the top and bottom of the cone. The nozzle is glued to the bottom of the cyclone. Nuts and bolts attach the parts together. The bottom of the cone and the plate go on opposite sides of a 5 gallon bucket.
The official description of this item, as per WotC, indicates that 2 medium creatures can fit inside at the same time, and that this item is considered large. This seems impossible. It is now well over the "large" footprint, but looks…
I really loved the idea of the nunchuck style grip but found the front bump didn't do anything, the grip needed to be wider, and farther toward the top. I also moved it to the side so it wasn't uncomfortable when attached to the switch or…
There are many similar models out there, but I wanted to make this for my nephew so I decided to make it customizable for any name and adjustable in size, etc . Each color prints separately in single extrusion, so there's no need for…
If you have a small mealworm farm for your chickens, or other pets, this is an easy effect way to separate pupa from mealworms. Because pupa are a little wider, the mealworms shift through the separator leaving the pupa easy to collect.…
Revolutionize Your Seed Cleaning Process Tired of spending hours tediously cleaning your harvested seeds? This 3D printable seed separator offers a quick and easy solution that saves time and money using ordinary house hold equipment - a…
💰You can obtain the commercial license for this model by joining my Patreon at the Merchant tier or higher. 🔔For the separated parts version: Please apply glue and gently press the parts together until they snap into place. If the fit…
I found multiple storage boxes for the Hornady Comparator Sets, but not one for the Full Set. So I made a new one to house the complete set in a nice hinged box utilizing some M3x20 screws and nuts for the hinge pins. I printed this at…
OpenForge 2.0 Dungeon Stone Separate Wall Bases with stone sides Separate wall tiles for OpenForge external Dungeon Stone walls. Printing Notes Test-printed with the following settings on a "Prusa Mini": slicer: PrusaSlicer (Slic3r)…
Hallo, ich habe hier für eine eBike Bosch Mini Remote BRC3300 ein Reparaturschelle konstruiert. Das Original ist leider gebrochen, ein Ersatzteil gibt es vom Hersteller nicht. Gedruckt in PC ist es stabiler als das Original. Auf der…
Rubberband Submarine - separate parts, two part propeller, no tolerance test needed.
( originally posted on my Thingiverse ) Remix of my origin “Screen Accurate R2D2 Dock for the Amazon Echo Dot 3”, this time I've separated the colours (White, Silver, Blue and Black) so they can be printed and glued into place. The whole…
Creality logo raised slightly out of the cover.
Remix of WinterHawk904's model, separated into blade, grip, and ring for easier single-color printing or printing on smaller beds. Added indexing holes between each part to make gluing easier. Also modified the spade logo on the blade to…
TL;DR: Sub 5 micrometer dust particle separation cut-off (density at or greater than water) Minimal pressure drop with little or no practical effect on suction power 3D-printable with only one support FreeCAD design files and OpenFOAM…
Ersatz/Reparatur-Zahnrad Schredder 10-47-30° 02 Es gibt jetzt einen verstärken Nachfolger : https://www.printables.com/model/1103048-ersatzreparatur-zahnrad-fur-aktenvernichterschredd ! Entleert Euren Schredder regelmäßig ! denn wenn…
This remix to Harashi's Wavepattern Coaster, the original is now split into 2 STLs. No need to swap colors mid print in this version, which may be easier for some. To assemble, I would reccomend lining the outer rim with a bit of…
Cyclone is made from 5 parts. mainly to split printing and eliminat as much supports as possible. You have also model where Main body is connected with the PIPE. Last file added is ALL IN ONE - full model of cyclon + one upgrade pipe…
The Lego model 10330 - McLaren MP4/4 Senna - comes with tyres that are much narrower than the real cars. This model is based on @tomvit work, and provides separate parts for tyres and rims to be printed individually. For best effect, I…
🎨You can find the multicolor version of this model on my Thangs page. https://than.gs/m/1330823 💰 You can obtain the commercial license for this model by joining my Thangs Membership or Patreon at the Merchant Tier or above. 🔔The keychain…
My remix of mgx's variant of the cyclone dust scrubber, adding the possibility to define different sizes for the inlet and outlet. I also added a thread for the standard european PET water bottles (thread from Necks & Caps Library by…
Rather then painting the original model ( https://www.thingiverse.com/thing:2994999 ) I just wanted to print the teeth in another colour. My prints were at 50% scale, since that is the scale I printed the original design at. These did not…
For the original design I liked the compact size and how it is inline for making it a part of a vacuum (Genius), but wanted the CAD files so rebuilt it as best I could. Tried to simplify the geometry and maximize areas while thickening…
This model is compatible with the lego system.
A 3d printable centrifugal dust separator for 6 in tube. The output adaptor is designed to slide over a Harbor freight 2 HP dust collector blower. I used this 6 in clear PVC tube for the housing. The dust flanges are designed to mount on…
The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates, Blender source file, and history. Go to my site for an overview of my other models (not all of them are published on…
Scaled down the original model to 40% to match the size of my other Darth Vader. Couldn't get the sword right, and really wanted it another color, so I broke the sword, drilled a 2 mm hole, about 4 mm deep, and inserted the red sword. I…
Buddha Statue - Separate Parts Use supports purely for the hands.
I used a clicky switch for the keys and do not put a brim btw ams needed or milti color for duck
This is a Thein Baffle-type dust separator which can be built extremely cheaply, in one visit to a local hardware store. It uses a 5 gallon bucket as the main dust chamber, and a 3.5 gallon bucket as the thein baffle chamber. There's no…
I removed the connecting mesh and split into larger pieces to comfortably fit a 200x200 print bed. Included some close-up pics to help with assembly. Print Settings Printer Brand: Monoprice Printer: Maker Select **Rafts:** No Supports: No…
A hexagon-shaped pod for displaying Lego minifigures. I found some really cool display pods for pretty much everything everything Lego Star Wars, and I really liked them, but there was no CIS pod, and since I have like 10 battle droid…
Printed with filament changes from black (layers 0-25), red (at layer 26), and finished with white (at layer 31). The sign has a frame around it that I didn't use but I put it in the file so it runs some filament through as I've had…
Put the Blades (Biggest → smallest) in the “opening”. Close the “opening” with the cover with Glue The individual Blades might get stuck inside of the other, but can be pushed back in the Handle with a little bit of Force.
Message me if anything needs changing or write in comments
I loved the original print in place. Try it. But this one is fun also. If printed at the supplied size, use layer thickness of 0.2 mm, especially for the chains. You will need 4 of the long chains. One short chain. Print the platform and…
