Spaghetti Pasta Gauge
Serving size is denoted by number of notches.
Wydruk około 0,67 €–0,81 € nettoWstępna wycena jednego wariantu
- Pobrania
- 2399
- Polubienia
- 372
- Ocena
- 4,55
441 modeli
Serving size is denoted by number of notches.
Wydruk około 0,67 €–0,81 € nettoWstępna wycena jednego wariantu
Measure Spaghetti for 1 to 4 portions
Wydruk około 0,86 €–1,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Keychain Flying Spaghetti Monster.
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Zum ausquetschen der Tuben für z.B. Zahnpaste oder Creme.
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
A compact, custom-designed toothpaste tube squeezer in a bunny shape, made especially for Easter. It helps squeeze toothpaste and similar tubes more evenly and makes it easier to use every last bit. Practical, decorative, and a fun 3D…
Wydruk około 1,23 €–1,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an easy to print storage stand for the KitchenAid Gourmet Pasta Press pasta discs and cleaning tool. (Model KSMPEXTA) I designed two versions, for 5 or 6 discs (if you decide to store one with the pasta press). Printing…
Wydruk około 8,10 €–9,90 € nettoWstępna wycena jednego wariantu
Es ermöglicht Kindern die Zahnpasta Dosierung und hilft beim sparen.
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dieser Behälter für Bosch Pastascheiben MUZ9PP2 schafft Ordnung im Schrank. Er besitzt ein Bajonettverschluss und hat an Dose und Deckel Rändelungen für den besseren Grip. Translation: DeepL This container for Bosch MUZ9PP2 pasta slices…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A stand fot your toothpaste tubes. Version one is for one small and one large tube, version two for two large ones. The large diameter is for tubes of a maimum diameter of 29mm and the small one for tubes smaller than 25mm. Ein Ständer…
Wydruk około 1,37 €–1,68 € nettoWstępna wycena jednego wariantu
Das Reinigen der Pastawalzen Bosch MUZ9PP1 (PastaPassion Set) ist recht schwierig, da man die Walzen kaum drehen kann. Auf diese Weise können Nudelteigreste zurückbleiben, was ich unhygienisch finde. Mit diesem Knopf kann man die Walzen…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
This is a pasta press with the accompanying cutter. It creates pasta with ca. 75mm diameter. Printing Nothing out of the ordinary. Print the parts as they are oriented in the file. I would recommend printing the hinge parts solid with…
Compatibility Use v1.0 or v1.0A1M receiver: As a stand-alone unit in conjunction with another stand-alone spool roller/stand/holder OR with Donor Spool Roller v0.3 or newer OR with Donor Spool Spinner v0.5 or newer v0.5 and later receiver…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Similar to GekoPrime's Clip for the other places. But this…
Untested work in progress
Printing parameters: Resolution: 0.2 mm Perimeters: 2 Infill: 15% Supports: no For two colors add a color change Calibrated with my favorite pasta Barilla Spaghetti no 5 (also works for all other spaghetti).
Printing parameters: Material: PETG Resolution: 0.2 mm Perimeters: part 1/2 and cutter: 4 part 3/4: 10 part 5/6: 15 Supports: only part 5/6 overhang Assembly: Fix hinge parts with superglue (e.g. Cyanoacrylate) First add parts 5 and 6 to…
Created an enclosure for the 37mm motor mount used in GekoPrime's original motor mount remix. Added mounts for a DC controller and 12v power supply. Parts list: 37mm motor -…
Pastamatic Filament Spool Winder Modifications Changelog: 2024-02-23 Added options for huge spools and small spool with spacers. Thanks to Ch3vr0n for the idea and testing of the spool spacers Modifications to GekoPrime's winder to better…
This is an barely tested mockup, it seems to work fine but I haven’t run a full spool through it Here’s a link to the motor. I used 8mm m3 screws. https://www.amazon.com/Greartisan-Electric-Reduction-Centric-Diameter/dp/B08D3SSG55/ I…
I wanted a 3 color Pastamatic with Bambu colors to compliment my Bambu Lab Colored toolbox with AMS lid. Decided on Black Frames, Grey Parts, and Bambu Green spindle clips for accents. File is on 4 seperate plates. Took considerable time…
The original Pastamatic would sometimes jump the lead screw out. The author did a remix to incorporate a brace into the side rail. This is for anyone who printed the rail without the brace. It will use all existing mount points and…
In celebrating spring, Corey Marchetti of CM Designs curated a very special design for our fellow gnome lovers. This fun, flexible gnome has floppy feet for your enjoyment. Shown in Protopasta's new April Endless PLA colors: Partly…
Hand Crank for the Pastamatic Manual crank for the Pastamatic Filament Spool Winder Pastamatic - Filament Spool Winder Bambu Lab X1C/P1P AMS link: https://www.printables.com/model/466883-pastamatic-filament-spool-winder-for-bambu-lab-x1c…
Crossbar remix
The shortened source cradle positions the source spool at a similar distance from the lead screw as the target spool. It's suitable when both spools are of similar size, minimizing space requirements.
Toothpaste extruder with suction cup support base - Exprimidor de pasta de diente con base apta para ventosas
EDIT 02-Sep-2025 : New revised motorized and furthermore engineered version published: https://www.printables.com/model/1398207-re-remodel-of-pastamatic-filament-spool-winder-for EDIT 20-Aug-2025: in a couple of days there will be a new…
To do: Change spool_max_ID in the main project so this shim isn’t required
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … You need 4 of them and a wood board (mine will be…
Edit 15-Sep-2025: A maker notified me that I posted the wrong motor, he was right. I am sorry for that. I corrected the right motor in the following description. It must be a ø8mm shaft with flat area, so-called D-type. Sorry for any…
For better seating …. V2.1 Small Clamp has been reinforced
Speed Control DC Motor Speed Controller PWM 1.8v 3v 5v 6v 12v 2A 30W Adjustable Driver Switch 1803BK 1803B NEW Drive Gear The NEW drive gear that has a closer tolerance for a press or tighter fit to the motor shaft. Spindle retainer…
Print in place rotating handle allows a tight grip, it rotates in your hand.
Bendy PETG wiper blades for Pastamatic
Adapter rings that allow the use of spools with up to 83 mm inner diameter [Pastamatic - Filament Spool Winder for Bambu Lab X1C/P1P AMS]
This set of wiper mounts for the Pastamatic Spool Winder has .25mm extra clearance for easier insertion/removal of the TPU wiper blades. It can also help compensate for any warp or flaws in the holder or wiper prints that prevent the…
KitchenAid Pasta Cutter / Roller Stand This is a simple holder for the KitchenAid pasta cutter and roller attachments that come in the 3-piece set with model number KSMPRA. The roller attachment by itself is model number KSMPSA. I am not…
To get that Protopasta.com look. Great test print for metal finishing. Enjoy all the colors & finishes at all angles!
I didn't find a spaghetti measuring tool during a trip to the shops, so I decided to make my own. A simple design that's easy to print, use and store. Provides spaghetti portion measurement for 1-4 people. Print > Cook > Eat > Enjoy!…
I was making pasta but didn't know how much I had to make for one person. So online looked up the diameters and created a tool for it. It can measure 4 serving sizes of spaghetti: 1 to 4 servings and a hole to hang the tool on it. You can…
Dies for Philips Pasta Maker Viva HR2333 I have created dies for making different pasta shapes: pappardelle, spaghetti alla chitarra, spirali, tagliatelle, vermicelli. I put the source in CadQuery in case you want to make your own…
had issues with the leadscrew binding so i added a place to add an extra bearing
Remixed the combo of these files to fit Proto Pasta spools to work in the Bambu AMS system. These require you to leave the lid open, but thats the case with proto pasta filament even without the rings. This makes the spools hold up well…
A handy strainer for pouring out the water after cooking pasta, rice or vegetables. Easy to just rinse after use, keep on a hook near the kitchen sink. It comes in three different sizes: a small version for pots up to a diameter of 18.7…
Are you tired of printing nothing but spaghetti? Do you wish you could print other things, like bavette, fusilli, lasagna or even penne? Are you craving for that perfectly printed tagliatelle or gemelli? Look no further! With this…
The Pastamatic Winder is great, but the donor spindle wasn't long enough to attach 2kg Polymaker spools. This model extends the donor spindle 1.75" to accommodate wider spools.
You can spin a lump of plasticine through the rollers and get a flat, rolled-out dough. It works like a pasta machine. In addition to the pressure parts, you also need 9 screws (M3 x 22mm).
Ergonomic Spatula for Thermal Paste / Epoxy / Glue - Spatola ergonomica per pasta termica / colla Easy to print, optimized filament usage Resize/Scale to adjust dimension All our designs are free to download and use—we believe sharing…
We could not get the TPU wiper to slide into the slot more than half an inch. Shaved a bit off the bottom bulb diameter, now slides in snugly.
Added a crank handle to the driven male spindle as I don't own a drill. While it takes longer than 2 minutes to wind, it works. Requires supports in the gap where the spindle meets handle Crank handle was taken from…
I design this disk for philips pastamatic, i try with PLA but bad result, the pressure is too high. you can try with nylon or ABS or you can use this model to make a mold. NOW you can customize easily with the original draw fusion 360 file!
Since the PHILIPS Pastamaker is a great food extruder, I wanted to make my cookies with it. Sadly there was no original cookie disc in my area available, so I decided to design my own. It's printed in PET-G, so at least the material is…
I was having an issue with the leadscrew pin vibrating out of place within the leadscrew block on my Pastamatic machine. This bracket keeps the pin in place within the block and slips easily out of the way in case you need to get to the…
These simple brackets allow side rails to be screwed down in a permanent position. Printed with PLA, I used 50% infill for addition strength. I just glued to side rails. but they could be bolted to rails. I added four, one in each corner.
These cotter pins were a came changer for me. I was having pin vibrating out while in use before. Now they are locked in! Edit: Made a long pin with the hole moved closer to the tip if you wanted to use the clip mod for the drive spindle.
also got this idea from https://www.printables.com/@Leo_1098206. i however don't have or can't find a 2.5kg spool which his what his particular remix is for. 5mm countersunk screws should fit fine.
hand crank for pastamatic a spool of bambu filament got away from my sister, and now needs to be respooled. she wanted a hand crank, so I designed this one. in particular, I wanted it to be easy to print and not require any extra hardware…
60 mm (tested): Prusament spools (perfect winding) e3d Edge spools (3dbuddy seems to have identical spools, untested) ok-ish thinner Spools do not work perfect. they get out of anlinghment (see my post in the coment section) 80mm Spools…
This adapter system wraps the edges of a PROTOPASTA 199mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable PROTOPASTA nameplate…
for slim spools like the old Makerbot spools.
The "x2" in the file name refers to the number of printed parts. Depending on whether the coil is receiving or giving coil, you have to insert the corresponding adapter (with or without teeth), and glue it in (I use super glue for gluing…
有效防止使用双电机MOD时,卷线时的跳轴的现象 机翻:Effectively prevent gear runout during operation when used the dual motor mod Hardware: 1X 608ZZbearing 1X M5X35Scerw and nut 2x M6X50Scerw
Pasta comes in so many shapes that every meal is different. Pasta is affordable, versatile, easy to make and is part of a good diet.
If you don't want to go to the supermarket for pasta, you can make your own pasta. Did't printed, because don't have a printer.
Alright I took the existing models and put them onto separate plates. Some of the bases are thicc so they need their own plates. Nothing “needs” a brim and probably prints best without them. I put this all together on my Bambu X1C (Fancy…
Enrollador pasta de dientes sencillo y portable
Each spool needs 2 rings. Tear the cardboard sides off the original protopasta spool and insert the adapter into the center of the spool. I added a dab of glue where the adapter touches the cardboard center to keep the spool from…
Lost my Spaghetti Die shape for my Philips HD2357 Pasta maker. So needed to remake it.
I really did not want to print the TPU just because I am an ABS person all the way. I found clips to hold down the spool axles on the Pastamatic but no one used them to slow down the filament spools as a brake. I tried rubber pads on the…
These remixed pins have a notch so you can secure them in place with a C-clip. Be sure to install them with the flat portion of the clip against the flat side of the pin. Variations There are 2 variations of the short pin. One directly…
This adapter is for the ORIGINAL donor spindle of the pastamatic. It accomodates 72mm center bore spools as pictured (mainly older Sunlu spools).
Modified Pins - Long & Short with a cap to be glued as a permanent install. Pin can be cut off (for replacement) Used - Gorilla Glue - (clear)
Printed with a 0.6 nozzle with ColorFabb woodFill filament on the Prusa MK3S. The G-code is only meant as an example. The printed 5x model is personalized with the initial letters of the "users" (children and grandchildren) on the…
This is a stand for the tree pieces of the Kitchen Aid Pasta Maker Set 5KSMPRA. It holds both cutters, the main roller and the cleaning brush. The overall height with the tools inserted is around 26cm. A version for the “Deluxe Set” with…
A pasta cutter for use with making things like ravioli or lasagna. The design uses a press fit bearing for smooth rolling. As with any food contact, either make sure you are following precautions for food safety in your prints, or simply…
Introduction Fully printable print-in-place sleeve bearing set for PASTA lite version 0.3 or earlier as well as the OG Pastamatic . For PASTA lite Receiver version 0.4 and later , the printable gear and bearing set will be included in the…
Probieren Sie die effiziente Art und Weise, Ihre Zahnpasta mit unserer Zahnpastapresse zu dosieren. Mit zwei Komponenten war es noch nie so einfach, Ihre gesamte Zahnpasta zu erhalten. Diese einfach zu bedienende und langlebige Squeezer…
Reinforced Main Drive Spindle - just as the description states. I had my original split right in the area - that I reinforced. I probably shouldn't have tightened it so much.
This is a remix of fellow Phil's excellent Pastamatic retention pin available here: https://www.printables.com/model/100. , to combine with the original Pastamatic, available here:…
This is a replacement leadscrew and winder spindle for the fantastic Pastamatic. It fits the refillable Sunlu spools with a width of 50mm and a center bore of 62.7mm. Tested, works.
Pastamatic Filament Spool Winder Add-On by Kistek. This add-on is for Pastamatic filament spool winders and is meant to secure the drive spindle so that it does not come out of the cradle during operation. This is especially important for…
The original driving shaft broke in the middle of the screw part. I printed it in PETG according to the instructions, but apparently the walls are too thin. So, I created a remix, which has a reinforced screw and the "top" end of the…
Leadscrew with shorter travel to wind smaller 750-gram spools like the ones from FormFutura, Ultimaker, and others.
You'll need: 1)Motor+controller (12V/375rpm and package C): https://aliexpress.ru/item/1005002607864635.html For russian region:…
Crossbar Remix for Pastamatic Filament Spool Winder with mounts for 2020 extruded aluminum. printed on x1c with 0.4 nozzle in overture Space Grey PETG .20mm std profile with the following changes: .20mmm layer height 4 wall loops 4 top…
This 3D model is a modular heart-shaped pasta cutter, perfect for creating romantic Valentine’s Day ravioli or other pasta shapes. The design consists of three parts: handle , screw , and base , allowing you to mix and match with other…
Buscando por Aliexpress, encontré unos dispensadores de pasta para soldar que me parecieron bastante útiles y a un buen precio. Cuando iba a comprar uno de ellos, vi que el vendedor que había elegido, en la descripción del producto, hacía…
This adapter system wraps the edges of a PROTOPASTA 203mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable PROTOPASTA nameplate…
My single motor just didn't have enough torque when the spool was more than halfway loaded so I remixed this setup for my controller and a dual motor setup. EDIT:added step files EDIT: Use this as well…
A pasta serving guide/measuring tool.
Remixed the enclosure for a different motor controller https://www.amazon.com/gp/product/B071H2YQG5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Printer: Anet A8 Rafts: No Supports: Yes Resolution: 0.15 Infill: 100 Filament brand: eSun Filament color: Yellow Filament material: PETG
Erhöhung um 20mm um DasFilament Spulen mit 2,6KG zu verwenden
Introducing the 'Prusa Pasta' measuring tool! A geometric measuring tool that determines portion sizes for pasta based the honeycomb infill pattern. Has measurements for one to four portions Text is embossed on the print but could be…
Spools designed to be printed with 50g of material or less per side and hold the Proto-pasta Endless Pastabilities subscription filament samples nicely while printing. Spools are designed to hold both the 50g and 100g 1.75mm filament…
In celebrating coffee, Corey Marchetti of CM Designs curated a very special design for our fellow coffee connoisseurs. This beautiful pour over station has a place to tuck your Hario V60 Paper Cone Filters (or similar) and is height…
Spool tension wipers kept sliding back, with these spacers you can set tension. printed with PLA, 5% infill 12/4 Added taller version for better support
This is a modification for my needs. I'll put it here just in case someone else needs one too. I needed a winder to rewind 5Kg spools after splicing them together. It seems all the other Plastmatics go from 3-5Kg to a 1Kg. Most of all my…