button aid - occupational therapy
button aid - helps close buttons for people with arthritis or limited use of their fingers. prints in 30 minutes no supports
- Pobrania
- 219
- Polubienia
- 38
- Ocena
- 3
203 modeli
button aid - helps close buttons for people with arthritis or limited use of their fingers. prints in 30 minutes no supports
If the door needs do be adjusted, the handles break before the screws damage the frame of the door, so sometimes you need them new. This part does not fit to the original base, because I needed to make the groove bigger then the original,…
Needed to fix my patio umbrella. Two of the arms broke after the wind knocked it over. Just needed to use some M5x35mm bolts with some washers and nuts. I used some nylon washers since it's supposed to be able to to articulate when…
Bowling medal for customization. Your players will cherish a personalized medal! Emboss or engrave with each player’s name. Print with your team colors. Add a ribbon for presentation 0.20 layer height 0.40 mm nozzle 15% infill medal is 4…
This umbrella reducer will allow a smaller diameter umbrella pole to fit snugly in your patio table. It's designed for a patio table cutout of 2" (actual diameter 48mm), which fits an Ikea Äpplarö table. The umbrella cutout is sized for a…
These are mounts for glides replacing wheels on patio umbrella bases and allowing them to slide easily on composite deck material. One design is for a square base and the other for a round base. The square design uses one slider pad per…
Recommended print settings: Material: PLA/PETG Layer Height: 0.20 (SPEED) Infill % : 15+ Supports: Yes, Tree/Organic Print Orientation: Default as modeled Perimeters : 5 This design is a replica of some small plastic pieces that came with…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Volleyball medal for customization. Your players will cherish a personalized medal! Emboss or engrave with each player’s name. Print with your team colors. Add a ribbon for presentation 0.20 layer height 0.40 mm nozzle 15% infill medal is…
I loved the version @Pippa made but wanted to also give the option to pull a zipper if needed, so I added a hook on the other end. It's sturdy enough that I could pull up my jean zipper (sorry about that POV) lol. I wouldn't go yanking on…
print 2x the side and 3x the pins to be able to print without needing supports. I just used super glue to combine the parts. I have also included the tool as a single model, as that was how I first made it
Got a new patio umbrella and lost the protective ring for the glass patio table.
This cup holder was designed to mount to a patio chair. The current mount fits a 28mm pole. The one in the picture is printed with PET-G and holds up very well in the Texas sun. The cup_holder_with_mount.stl combined with…
Blank medal for customization. Your players will cherish a personalized medal! Emboss or engrave with each player’s name. Print with your team colors. 0.20 layer height 0.40 mm nozzle 15% infill medal is 4 mm total thickness, engrave to 1…
This model is a plug to be used on a patio light stringer to fill an empty socket. This will give a set of light stings a much more finished appearance, will prevent debris from accumulating in the sockets, and will prevent accidental…
Needed a new insert for my glass patio table to fit my new, 32mm diameter umbrella pole. I resized the model that I found on thingiverse so that it would fit both the 32mm pole and the 50mm hole in my glass table top. The threads worked…
Soccer / Football medal for customization. Your players will cherish a personalized medal! Emboss or engrave with each player’s name. Print with your team colors. Add a ribbon for presentation. 0.20 layer height 0.40 mm nozzle 15% infill…
Basketball medal for customization. Your players will cherish a personalized medal! Emboss or engrave with each player’s name. Print with your team colors. Add a ribbon for presentation 0.20 layer height 0.40 mm nozzle 15% infill medal is…
We have several of these highly effective little devices, but unfortunately only one of them came with a lid. As it tends to accumulate a little residue on the surface during use, it's nice to be able to cover it before putting it away.…
Getting the patio ready for spring, the ring for my patio table fell apart. This fits perfectly into the standard hole of a table and is a quick easy replacement.
I have several patio umbrellas and heavy under-table stands. The stands all accept poles with a much larger diameter than the diameter of the actual umbrella poles. This results in umbrellas that are difficult to hold in place with the…
After 30 years, the rings holding the legs together on a Sunbeam patio table started cracking and coming apart. I have designed this replacement part to be a drop-in replacement, using all of the original screw and nut hardware, with the…
The opening in this version is 40mm diameter which I found was a good size for a 38mm umbrella, not a tight fit that would strain the material but enough to hold the umbrella straight. I printed in white PETG as this is being used outdoors.
Tennis medal for customization. Your players will cherish a personalized medal! Emboss or engrave with each player’s name. Print with your team colors. Add a ribbon for presentation 0.20 layer height 0.40 mm nozzle 15% infill medal is 4…
Baseball / Softball medal for customization. Your players will cherish a personalized medal! Emboss or engrave with each player’s name. Print with your team colors. Add a ribbon for presentation 0.20 layer height 0.40 mm nozzle 15% infill…
This is a simple remix of Henlor's extruder cover, optimized for SLS and SLM printing.
Golf medal for customization. Your players will cherish a personalized medal! Emboss or engrave with each player’s name. Print with your team colors. Add a ribbon for presentation 0.20 layer height 0.40 mm nozzle 15% infill medal is 4 mm…
A cheaper alternative to purchasing patio furniture clips to keep your patio furniture together
We lost an umbrella two years ago from the wind, so we bought a new one and I used bungee cords around it. However, the bungee cords keep going bad, so I decided to make this up and see how it does. I had to use PETG since it's outside,…
Bungee ball bracket for patio shades. I designed this so I could have bungee ball holders at different heights. Mid height allows you to see your yard but offer privacy. Lowest height helps with weather protection. The replacement bar end…
Braces designed to hold a patio umbrella against the railing of a deck. I designed it with the Ikea Fliso umbrella in mind, but it can handle any diameter up to 38mm (and pretty much any size below there, thanks to the screw fastener).…
Replacement top cap for a Patio Umbrella. 1.5" radius sphere. 1 3/8 -12 UNF Thread for pole mount. I suggest printing the Patio_Umbrella_Test_Thread... file first to verify the fit with your pole before printing the cap. Print Settings…
My Original Prusa Enclosure had a bit of echo when printing so I wanted to try the concrete patio slab/paver ‘mod’ to quiet things down and it seems to help. I already had a 45x45cm concrete patio slab/paver that I was using before I got…
Use this mold to print concrete forms for your patio bricks
This is an insert to support the umbrella for our patio table. These support both the umbrella in the holder on the ground as well as aligns the umbrella at the table hole. This is a simple design, but I have provided .STP files so you…
Solar Lanterns / vases for your patio or deck. For best results print with transparent PETG. Print using vase mode or without zero infill and no top layers. Designed to use these lamps: https://www.amazon.ca/gp/product/B0BYSY98F6…
Get those paper towels off the table and out of eye level while still making them easily accessible. This mount is designed for a 1.5" diameter patio umbrella pole and holds up to a “triple” size roll of paper towels. Attach it high to…
I printed in TPU, no supports needed. The hole in my table is exactly 57mm in diameter and the fit is snug. If printing in PETG you may want to scale down a little bit to allow a little bit of play, especially if your tabletop is made of…
Patio Block Interlocking puzzle by Stewart Coffin (STC #82) Assemble the eight pieces into a 4x4x4 cube. Patio Block is classic Stewart Coffin: a simple, elegant idea gives rise to an unexpectedly challenging assembly puzzle. Coffin wrote…
Decided to add ear protection to this poor Goblin, just doing his job to make your dungeons a tad safer. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 20% Triangle Filament: Form…
Uses 3/8" mounting bolts to attach holder & spacer to deck rail, with additional #8 deck screws for securing the spacers. Upper mount requires 1x 5/16 bolt and wing nut to adjust clamping. Update : -after 1 year in service this has held…
Tees to convert hanging lights that just have two wires coming out of the top into a Tee style hanger that can be clipped on to a supporting wire. I'm specifically using these for Govee Outdoor String Lights H7021 The AutoDesk Fusion file…
This is a quick model to fix a broken patio umbrella. I ended up printing three of them to fix the three broken ribs that support it. Use an M5 bolt and nut to go through the broken rib to keep the 3D printed piece in place.
This simple two-piece mount holds a Thermacell E55 Mosquito Repeller (links below) without blocking chimney for functional airflow. May also work on other Thermacell E Series Repellers but I don't have any to test (if it does, let me know…
Parametric Patio Umbrella Base Adaptor for patio umbrellas to fit in larger bases. My Patio umbrella has a smaller diameter hole than the weighted base I have. So I made this adapter to make umbrella sit tight and plumb. The STL file here…
Keep your patio hanging egg chair frame safe and your floors scratch-free with these custom 3D-printed feet. Designed for easy indoor storage, these feet provide a stable base and prevent damage to your flooring. Enjoy the convenience of…
Hang Christmas or bistro-style lights along the upper edge of a block wall fence without drilling holes in the wall. For block walls 4" (~100mm) to 6" (~150mm) deep, print one Front and one Rear part each. For block walls from 6" (~150mm)…
Football (American) medal for customization. Your players will cherish a personalized medal! Emboss or engrave with each player’s name. Print with your team colors. Add a ribbon for presentation 0.20 layer height 0.40 mm nozzle 15% infill…
Replacement protector for umbrella hole in a glass patio table. Fits a 36mm diameter umbrella pole (center hole is 38mm) with a 50mm hole in the patio table. Printed in black ASA on a textured bed.
Replacement for the top plastic spacer of a Patio Umbrella Stand that I believe was purchased from Costco. Inner diameter 43.6 mm Outer diameter 50.4 mm Flange diameter 60.2 mm Category: Outdoor & Garden
Designed this heavy duty bushing when the original cheap plastic one that came with the table broke. Made of 2 pieces that screw together onto the glass patio table top. Easy print, made it out of PET-G.
Two pieces Recommended Print Settings Print Orientation: Default as modeled for the bottom, Top down for the top piece. Material: PLA Layer Height: 0.20 mm or less Infill % : 15% or more Supports: None Raft: Optional Brim: Optional
A simple hook to go on to the handles of a set of Patio/French doors to keep them from blowing in the wind when you don't want the doors fully open. It was printed using Creality Hyper PLA with the following parameters: - Standard…
This part is to replace one side of the adjustable plastic clamp that holds the canopy at different angles. The flat adjusting turn knob on the bolt that goes through, can be loosened and tightened against this part to allow the canopy…
Needed a way to mount my Thermacell to one of my outdoor light timber stands. Great way to get it off the table to prevent being tipped over. I have printed this in CF PETG and haven't had any issues with warping outside even in direct…
Replacement grommet for the umbrella hole of a glass outdoor table. * Must be printed in a flexible filament. Print shown was printed in TPU. * Glass thickness: 5 mm Glass hole diameter: 50.4 mm Grommet Umbrella hole diameter: 40 mm…
Click in tiles for the patio, garage, or any other living space you wish to protect the flooring of
Avoid surface discolouration under plant pots due to moisture build up. Designed to fit on a 230x230mm bed. Scale as requried.
A replacement center ring (for holding the parasol) for your patio table. Best printed in something flexible (nylon or TPU), but PETG might be OK. Fits a table with center hole around 50mm, and parasol pole 40mm.
The plastic ring that kept my patio umbrella centered in the hole broke. This fits a standard metal patio umbrella pole TIGHTLY. Double check dimension. I printed with 100% infill.
My outside cast aluminum patio door handle suddenly gave up and broke. Amazon search suggested I buy a new set for $26. Why pay money if you have a 3D printer? 10 minutes in Fusion360 and 2h30m on the printer and voila. And the new design…
A simple hook to go on to the handles of a set of Patio/French doors to keep them from blowing in the wind when you don't want the doors fully open. It was printed using Creality Hyper PLA with the following parameters: - Standard…
Heres a hook I made to fit in the gap under my patio roof to hold string lights. Wedge it between the roof and the supports. Each corner is a different height so it should wedge in there pretty snugly. Hang your lights. Enjoy!
Fits Patio sets with 180 mm inner diameter between legs. 4 legged model.
Created a “S” hook to fit on a 2x4 hand railing. I have a pull-up gate that is always in the way, with two of the hook the gate can be hanged out of the way. Also, use it to hold my kids soccer goals. Printed with 4 vertical walls to add…
Made this as a sort of ornament to give to my brother for Christmas because I got him a real patio heater but it was just too big to lug around, but I wanted to give him something when everyone was opening their gifts. Printed in 2 parts…
This is a slimline door handle for patios and balcony doors where space is limited due to a fly screen. Its only 8mm thick and very stable. Easy to print, because it lays flat on the bed.
The door handle broke years ago and I had a piece of painted pine in it's place after buying and returning a few poorly fitting replacements. I got tired of looking at the pine handle and it was a good excuse to buy ASA filament. I used…
Over the years, several exterior door handles on the doors to the balconies and terraces of our house were broken. In addition, the original handles were always annoyingly in the way when cleaning windows. As a replacement, I designed a…
Replacement feet for patio chairs with 22mm legs. I designed these as my patio chairs had lost some of the original feet. These are designed to fit 22mm chair legs. Printed at 0.2mm PLA, no supports needed when printing vertically. I've…
Probably very niche but thought I'd upload it anyways since I made it. It is for an umbrella parasol base off Amazon called “URBNLIVING 18L White Anthracite Garden Patio Plastic Umbrella Stand Sun Shade Parasol Base”. The adapter that…
Printed with eSUN Flex (eTPU-95A) material under recommended print conditions. No special requirements for printing other than make sure you either use painters tape on a smooth bed as a barrier or use a textured bed for the print when…
Print in the orientation that it loads in as. Can print from any plastic, but I used a firm TPU for durability. (High Speed from Overture) I also greased the threads good with dish soap since tpu can be a little too grippy for threads.…
Replacement wheels for outdoor patio heater. These have OD diameter of 56mm (2 1/4") and ID diameter of 9mm (3/8"). I used 1.2mm top/bottom/sides thickness, 12% infill and .3mm height.
I noticed that the plastic supports holding the glass surface of my patio table have been breaking and falling off. I took one of the broken ones, made some measurements with some guesses as to the screw hole size and center location, and…
Hampton Bay Patio Chair 2004387 Foot.
This is my clip on umbrella light. There are 4 versions of this clamp inside. There is a tilted and straight version both with a solid or open bottom. They will light up your patio umbrella and look spectacular. The "Open" version on the…
I suggest PETG for outdoor use & High Layer count at Bottom Layer
Printed in Elegoo PLA+ @ .22mm layer height, 210c, 60c bed. Probably way overkill but 10 vertical/horizontal shells at 1mm thickness and 100% infill. It was printed in knob down orientation with no supports but would likely be best…
Our umbrella opening in the patio table had a plug that rotted away - so I needed a replacement. Five minutes in Fusion 360 and I had this nice cap. I made it to fit loose so it drops in easily and can be glued in place with some silicone…
Simple mount for a 48mm pole and reflector with 78mm spaced holes. Uses 4 M8x50 screws and 4 M8 nuts.
When we took down our patio umbrella for the season my wife suggested that I design and print a cap for its stand to keep all the leaves and pine needles out over winter. That only took a few minutes... so I kept designing. I ended up…
This pot will fit between the rails on a fairly standard apartment patio railing. The vertical rails need to be ~87.5mm apart with a depth and width of ~13.5mm. You can easily slide the mounting part of the pot between two rails while it…
Clamp Clamp incorporating a compliant mechanism, printable without support. Produced in 24 hours for the third edition of the 24H 3D Print Polytech Tours . This model responds to two themes simultaneously proposed during the competition:…
Replacement umbrella bushing for glass patio table. Print Suggestions Print in PETG or another UV safe filament Print at 100% infill
A few of the feet on my patio swing have cracked over the years. I don't know when it was originally purchased (I think it's a hand-me-down from family), so buying replacement feet is out of the question (not to mention I have a 3D…
Inspired by the various winter caps for patio umbrella posts, I put together a quick bird feeder to sit atop the unused post in the middle of our patio table during the Winter. The feeder fits over the post in the middle of the table and…
A key-holed peg board with box and pegs for Occupational Therapists to use for wrist motion exercises. 16 holes on the board in random rotations require the patient to use a variety of different angles. Two different peg shapes are…
A patio door handle for a friend of mine. One part is for heat inserts. The other one for screws.
Cover for center hole for my glass patio table.
This is a patio table umbrella ring with top and bottom parts. Screwed together to assemble. Custom designed by Makerwiz in Fusion 360.
Restore worn or damaged patio armrests with this simple and effective Armrest Repair Cover. Designed to slide over the corner, it neatly hides imperfections while protecting the surface from further wear. Its angled, minimalist shape…
Hallo, ich habe einen einfachen Terassentür Griff entworfen. Ich habe ihn mit sehr starker Wandstärke und sehr dichtem infill gedruckt. Hello, I have designed a simple patio door handle. I printed it with very thick walls and very dense…
Growing melons in pots on a patio or balcony can lead to the fruit resting directly on hard tiles or compact soil, which risks bruising, rot, or uneven ripening. This 3D-printed pad is designed to gently cradle your watermelon (or other…
A hook for our patio roof to hang lights from
Just a remix of the original to take away the tilted edge so it can print without support. I also opened up the hole to be 37mm because my pool was 36.5mm. Printed in PETG for more stability and due to high temps.
Tired of feet on my outdoor chairs from Jula loosing their feet's and then making huge gauges in my outdoor deck.