1581 modeli
Simple add-on to hold a Pinecil type soldering iron when working with the adjustable pcb holder tool from @squinn. Snaps in to the cutout in the legs of the holder, can be mounted on either side for right or left hand use. Designed to use…
Wydruk około 1,29 €–1,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Can be used in any cnc machine that has the same spacing on the extrusion on the bed (15180 aluminum extrusion). Allows for large adjustments and fine adjustments. Hardware 9 - M3x20 (If you tighten too much on the pcb clamp it may…
Wydruk około 6,15 €–7,52 € nettoWstępna wycena jednego wariantu
This is a nice simple PCB Vice that does take up a lot of space. It does not need a huge print bed so should fit on most printers. I have included a tall version but in all honesty thing this would be overkill, it would allow you to get a…
Wydruk około 8,86 €–10,83 € nettoWstępna wycena jednego wariantu
If you've ever soldered header pins to a board, you know it's a pain to get them straight. You can stick the board and pins into a breadboard while soldering - that usually works. But if your board only has pins on one side, the other end…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
I decided to make my own PCB holder for soldering. I wanted the design to be simple but strong. The rods are ½-inch dia. from an old inkjet printer that I cut in half. They are heavy enough to hold the whole thing down without it moving…
Wydruk około 6,14 €–7,50 € nettoWstępna wycena jednego wariantu
Hi For you who uses the amazing handsfree measurement system PCBite made by Sensepeek, I have made a protection cover for the SP-series of probes. SP10, SP100 and SP200 fits in the cover The covers can also be stacked by using the sleeve…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
Case for openDTU AllianceApps DTU Adapter PCB - ESP32 to NRF24L01+ Find Board here: AllianceApps DTU Adapter PCB - ESP32 zu NRF24L01+ Printed: Printer: Prusa Mini+ Filament: Prusament PETG Nozzle: 0.6 Profile: Prusa predefined 0.15mm…
Wydruk około 1,56 €–1,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is intended to assist in the build process for the ErgoDonk Zero keyboard. These feet act as a ‘third arm’. They can be snapped onto the PCB to elevate it from the work surface while through hole components are added and soldered.…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
Inspired and remixed by the Thingiverse design: https://www.thingiverse.com/thing:2427726 The same user had one a lot smaller but I needed something in the middle. Has 8 slots for the holder, available in the link. This is attached with…
Wydruk około 4,06 €–4,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Two variants of "mounts" for 5x7cm paper-epoxy prototype PCBs (If you use them, you know what I mean.). One version uses M3 hardware to fix the board. The other uses glue, if anything at all.
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
This part is meant to hold a Keyboard Switch Biscuit firmly in place in a position that is convenient for hand soldering. One would would be convenient enough but I would suggest printing a few and glue them together to a flat surface as…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
PCB soldering stand with provisions for M3 brass inserts and M3x15 screws to hold the parts in place. The bottom rail has a dovetail joint to expand the size of PCB that can be accommodated on the stand.
Wydruk około 2,16 €–2,64 € nettoWstępna wycena jednego wariantu
Pole mount and housing for ADS-B 1090 MHz PCB antenna https://s.click.aliexpress.com/e/_c3I3thdT You can find the mount for a 25/35/40/50/60 mm pole. Hardware needed: n.2 M3 threaded insert n.2 M3x6 mm button head socket screw n.4 M4 nuts…
Wydruk około 8,63 €–10,55 € nettoWstępna wycena jednego wariantu
Case for esp32-eth01 with custom pcb link for custum pcb for esp32-eth01 https://www.huizebruin.nl/product/esp32-eth01-ethernet-pcb-scr-con-01/
Wydruk około 1,87 €–2,29 € nettoWstępna wycena jednego wariantu
This is a simple little model that works with the Clockwork 2 Extruder for the Stealthburner. I'm using a E3D PZ Probe on my Voron, and wanted to keep everything within the toolhead, since I'm using a Nighthawk 36, the PCB for the…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
I made this angled mirror holder to allow easier viewing of LED indicator lights on the underside of a PCB. This is useful when I have the PCB fixtured upside down in order to access test points on the opposite side of the board. If the…
Wydruk około 1,03 €–1,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gehäuse für einen Batteriebetriebenen Homematic Aktor “Siehe Link” Meine Frau Ihre Deko bekommt so immer ein paar kleinen LED Ketten, mit Einbindung in das Smart Home Die 6 ist für eine leichte Identifizierung.
Wydruk około 0,82 €–1,01 € nettoWstępna wycena jednego wariantu
adafruits voltage regulator/filter PCB enclosure with 4 pin Connector fitted Header, Vertical, 4 Way - Jst (japan Solderless Terminals) | CPC Connector Housing, 4 Way - Jst (japan Solderless Terminals) | CPC Crimp Terminal, XH, 28-22AWG -…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
case and cover for esp wth32-01 with custom pcb and LM2596 you may modify it as you see fit you can get the custom pcb for the esp32 wth-01 at: https://www.huizebruin.nl/product/esp32-eth01-ethernet-pcb-scr-con-01/
Wydruk około 7,41 €–9,06 € nettoWstępna wycena jednego wariantu
I used the Solidworks Polypanel snap connector design from here . More info on polypanels can be found here . This 2x2 Polypanel is part of a test fixture for an LED display. I added standoffs to hold an LED array. It can easily be…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
I needed a way to securely attach my scope probes to PCBite. I like the gooseneck that they provide but i'm not a fan of the probes. I wanted to just reuse the scope probes I already owned. The hole on the bottom of the part was designed…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A handy tool to help with soldering, de-soldering, or other tasks where you need a steady third hand. This is a fully printable design, so no other hardware is required. With the largest base (as shown in the pictures) the clamping…
While the world seems to talk about eddy current based sensor probes nowadays, I still like the little PCB Klicky 🥰. So building my 2.4 I just optimized what is out there to dock the probe securely in place. Support me : Please leave a…
Many parts of the Mini benchdrill are designed for PLA filament. A few parts are designed for heat-resistant filaments (Petg, ABS, ASA). Assembly steps and details are shown in the video. This design has an automatic start-stop feature…
Description For this to work you have to download the casing from my Business card Embosser (LINK!) For al electronics and PCB entheusiasts! PCB / Circuit board Rollers for the Business card embosser! (Only rollers, no casing) More…
Status: Released! Compatibility Warning! PCBv3.1 and PCBv4 (with onboard STM32 chip) are the only compatible PCBs. PCBv3 (which uses the WeAct BlackPill) is not compatible and should use the Protective Housing . Description This housing…
Since many of the new Chamberlin/LiftMaster garage door openers do not have removable light covers, including mine, I decided to make an enclosure to prevent any shorts and keep the PCB properly protected. This is an enclosure for the…
These are fully-stackable PCB stands and hole gauges. I made three step sizes, 1mm, 2mm, and 3mm. The peg diameters go from M2-M14 (M2, M2.5, M3, M4, M5, M6, M7, M8, M10, M12, M14), and have a 4x step base. These are great for putting…
FULLY 3D PRINTABLE - Single and dual gripper helping hands/PCB holder, included models with and without magnetic base support! The magnets it uses are 10mmX5mmX2mm rectangular magnets. Recommend printing in PETG, or some plastic that does…
This is the current files for the TD-1 PCB kit. You may print the parts in any type of filament you choose. The sensor mount needs to be printed in black filament. The rest can be printed as you wish. TD-1 Is now available! Visit my…
Add a new feature for for the Adjustable PCB Holder Tool, to complete with another use for the soldering station. These cable clamps (clothespin) can help you at soldering cables. Attribution: Remix for the Adjustable PCB Holder:…
the adjustable PCB holder tool by @squinn is an amazing tool, but did you ever wish you could hold more than just the PCB? what about the wires you plan to solder? well now you can!!!! I added a ball joint to the original base, and one to…
Reupload from thingiverse, because it's not here and I find it useful. Original autor Rocco81-92 . --- A tip as appreciation is welcome. Backcover for the new Ender-3 Display. Hi, i used four countersunk (2x M3x10 / 2x M3x16 (M3x18 work…
Revision history: 27/01/24 added the STEP files, which may be particularly useful if you want to adjust the slots for the magnets inside the guiding rails. 01/02/24 added an alternative guiding rail version with cutouts for round magnets…
Basic "I don't want my protoboard shorting or gouging holes in my desk" feet/standoffs for M3-drilled 1.6 mm thick PCBs. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 mm Infill: 15% Filament:…
This is a PCB or wire holder for your soldering work. The middle part can be pushed down! Now a PCB or a wire can be clamped in! As an example, it holds an ESP 32 board. For bigger things or 2 wires use 2 holders. tested with Petg, infill…
PCB standoffs. For best results use .05mm layer height for threads. this will give you 10 layers per thread and should result in good performance. Please let me know if you find them useful. 12 mm standoffs with M3x0.5 threads. 3-10-19 -…
Remixed together Alexander's and BTT's Cable door for the voron stealthburner to work with the SB2209 / SB2240 If you want to use a controlled 3rd fan to cool your EBB SB2209/2240 use HyperToxic's guide to add that 3rd fan, pinout on the…
Most of these files are from others' admirable efforts , please check out the remix links for the originals. I renamed, translated, reoriented and collected various model files from various projects into singular project (please see all…
My design of powerbank based on chinese pcb and 1s8p pack from my previous powerbank. Main body is designed to be printed standing with display hole on top. To fix parts together you need 4-6 m3 screws with cone head.
Can be printed in a single color, but works best with multiple colors. I used two filament swaps to print the back plate, traces and letter in different filaments. Tip: when slicing, PrusaSlicer should detect the model is a sign or logo…
I made this in order to fit 2 buck converters on top of each other to save space. PCB Standoffs for small electronics with different heights The Bottom Piece diameter is 10mm Pillar is 5mm Top pin is 2.7ish mm B(Bottom) - #(Height)…
In order to cool my SB2040 canbus-board (with extruder-driver onboard) I used to have a 30mm fan cover sitting on my Clockwork2 extruder. Now switching to Galileo2, noone seems to have designed such cover, only for smaller 25mm fans…
The PCB Workstation with Nano Probes is the best solution to work with electronic boards equipped with SMD components that are very small and hard to access for many of the most used laboratory test probes. UPDATED: Now you can buy the…
This is a Parametric PCB Case made with Fusion 360 Print instructions Open the f3d file in Fusion 360 Change all the parameters that fits your needs Convert parts to mesh bodies and output them to stl files or to your slicer Slice and Print
I've had trouble with soldering some small PCBs, so I designed a PCB holder in FreeCAD with parts I had at hand. To build one yourself, you’ll need the following hardware: One 2020 aluminium extrusion profile with tapped ends One 8mm OD,…
Updates 12/2025: Created additional PCB-themed ornaments for your (real) tree :) 12/2024: Added a version with a star as tree topper. The star is also available as a separate download and could be added to the tree afterwards, but the…
This is a parametric (adjustable) PCB-Holder for DIN-Rails. I have attached the fusion360-file with full history in order to easily improve it. The design assembles without screws, you might need to compensate size of the connectors in…
Enclosure for PCBv4.xSTD for AgOpenGPS. Enclosure has 2 removable sides, PCB can be inserted from both. This version is fully 3d printable. You can choose from many face and back plates available. But F9P users can only connect antenna…
Hello, This is a PCB holder for my CNC. To avoid vibrations, I advise you to place a plastic plate printed with 100% filling of 1.5mm Under the plastic plate, I put a piece of polystyrene Beware of dust ! I use vegetable oil on my PCB to…
Added vents
Yet another PCB Holder remix. If you found this useful, please donate what you think it is worth to my paypal.me. Help cover the time of design. Thanks, Enjoy! Category: Electronics
These mounts use heatset inserts and M3x6_FHCS, longer M3x12_SHCS x2 are needed to mount to the bed plate. IGUS model: 0_62m_E2_10_10_018_0___E2_100_10_12PZ_A1_4 v2 12links. 3 hole open-back Drag-chain: Updated Y Axis Drag-chain mounts to…
The PCB Workstation Kit V1 with Needle Probes is the ideal tool for hobby or professional work on small or medium sized electronic boards (PCB width from 10 to 156 mm). UPDATED: Now you can buy the much improved 2024 V2 kits at…
I had a need for a PCB Rack. The commercially available PCB rack cost €50.=, which I deemed too much, for a simple piece of plastic. So I designed my own. It has 25 slots for PCBs (but depending on the height of the components on the…
Customisable Gridfinity boxes for storing PCBs or perfboard. I've included some common sizes for perfboard (the dimension in the filenames is the length of the board), but with openscad you can customise to the exact sizes of your PCBs.…
I didn't have any screws lying around for the printhead mount so I moved it to a place where I could reuse the screws. Also changed the ADXL clasp so that it can accommodate a bare ADXL345 board with soldered on pin headers. I printed…
Having ball bearings running in metal sleeves results in a smooth action and a more compact SpaceMouse. Hall effect joysticks eliminate dead zones and enable much finer control. The only issue you need to be aware of is manufacturing…
This is an OpenSCAD recreation of Adafruit's Adafruit Swirly Aluminum Mounting Grid for 0.1" Spaced PCBs . You will still need stand-offs, and the printed versions are going to probably be too flexible for more permeant uses. That said,…
I made it to drill holes in PCBs. Used old hard drive, toner tube, smooth rods from cd-rom, I can't remember where I removed the springs. Power supply of old loptop. Motor RS-555. Some parts needs suport. Check video: Update aded 4 parts…
tiny_rack is a eurorack rack project for DIYer with just starting DIY eurorack modular synthesizers. See full project (with power pcb) here: https://github.com/KevinKeWang/tiny_rack - One-piece 3D printed, no splicing, no metal rails…
This is a toolhead spacer with strain relief for the Voron V0.1 that makes the Bondtech LGX Lite extruder mod work together with the Umbilical PCB mod by timmit99 . BOM Qty Description Sourcing 4 M3x6 BHCS Aliexpress 2 M3x30 BHCS…
Universal PCB DIN/Desktop adjustable holder Any size of PCB, Any orientation od PCB Any distance fom holder using standoff. Using Extender as desktop holder for PCB Addition to universal PCB DIN/Desktop adjustable holder…
Super cheap and completely printable mini CNC. I had a few Parts left from an old 3D Printer which i wanted to use for a tiny CNC which i can use to mill (engrave) PCB´s and smaller parts for my micro RC Trucks. For the Ramps I´m using a…
This is a small, mainly printed table router for anyone who just wants to try out whether a CNC router or engraving machine is something for them. Ideally, you already have some of the required parts such as stepper motors, power supplies…
I've been following @Kempy_272538's version of a SpaceMouse that he made a PCB for to simplify wiring and make it more compact and robust. I really liked that idea so I thought I'd try it on this model. Everything else is the same as the…
This is a remix of the rubber band PCB vise by Delph27. The main changes are in the base, which has been rounded to help resist warping. It's also got some new cutouts to reduce print time and material, as well as a tightened up channel…
This jig will hold your PCB and solder paste stencil aligned while you apply the paste. There's space under the PCB for components on the back side, and you can easily remove the PCB while leaving the stencil clamped in place, so you can…
This is a pistol brace that is similar to a Flux style blade brace but works on a Sig folding brace arm that has a Gear Head Works adapter mounted to it. This is press fit on and is a snug fit. Simply use pliers to grip and unscrew the…
This model adapts the V0.2 Umbilical PCB holder to be compatible with the DragonBurner toolhead and the Sherpa Mini as the extruder. You need 4 standard M3 heat set inserts for the spacers. The original spacer are not long enough and have…
PocketOBI is a handheld diagnostic tool for Makita 18V LXT battery packs. Plug a pack in and it reads the pack voltage, individual cell voltages and their spread, both temperature probes, the charge count, the serial number and production…
If you, like me, design and manufacture your own PCBs, you know storing all those PCB's is messy. You can keep them in the box they came in, you can keep them in the bublewrap… but every time you need to fetch one you inevitably need to…
A parametric stand and holder for PCBs, and other items that want to wander off when you're soldering at them. The rotating grips print in place, and the columns of the supports twist independently to lock the supports into the rails.…
A remix of JaredC's Galileo 2 Cable Door and Alexander's SB2040 CW2 fan cover door I use HyperToxic's wiring schematic to have my CAN PCB Fan turn on when the extruder is used, Info is in his github…
The uploaded models measure 10x10mm and have a 5x5x2mm gap for the pcb and holes for 3mm screws. The asymmetric ones are 7x10mm and have a 5x3x2mm gap. The asymmetric code can also create the slotted block if you use a 7x3x2mm gap.…
Add a pair of drawers under the screen of your Ender 3 Max, The bottom drawer is much larger and is great for storing printer-related things like superglue, or filament clips. The top drawer is much smaller and has a section for storing…
STEP file for the PCB of the Zaunkoenig M3K. This file is not intended to be printed out. It is intended to help you design a gaming mouse shell for the M3K PCB. A few notes about the screws used for the M3K PCB (identical to the M2K…
The Klicky PCB that I purchased included more than enough magnets and heat inserts so I went ahead and modified the dock and mount to utilize these extra parts. I have also uploaded a version if you prefer to glue in a magnet. I also had…
Hardware: If you are using all 20 probing arms: M3 Heatset insert x80 M3*6 hex socket machine screw x60 M3*10 hex socket machine screw x20 0.4mm accupuncture needles (8cm) x20 - same ones you'd find for cleaning 3d printer nozzles…
Model využívá OpenSCAD knihovnu BOSL2. Najdete jí zde: https://openscad.org/libraries.html , nebo potřebné soubory z knihovny jsou v přiložené složce BOSL2. Doporučuji podívat se také na tento model - Univerzální krabička pro PCB v1.1
I use custom cables with PTFE wires, so strain relief is not necessary. However, I couldn't find many umbilical PCB mounts without strain relief, so I made my own. They are available for Orbiter 2.0, Sherpa Mini, and LGX Lite. Required…
• Fits CW1 and CW2 X-carriages • Works with Voron TAP (use CW2 Carriage) • For LDO and HARTK Afterburner Toolhead PCBs • All screws mentioned are SHCS • There is a tight fit between Orbiter thumbscrew and Stealthburner main body. Feel…
The PCB Workstation Kit V1 with Articulated Arms is the ideal tool for hobby or professional work on small or medium sized electronic boards (PCB width from 10 to 156 mm). UPDATED: Now you can buy the much improved 2024 V2 kits at…
Just another cover for a typical light switch. Print "face down" with no supports. The .gcode file includes a "filament change" pause so you can print two-color if you like. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
This is my print in place PCB-Holder, See it in action, and get all the info here: https://youtu.be/jN2l7cCoVB4 There is a GoPro-Mounted version, and a Stand version. (stand version has 70deg overhang, but it is printable with a standard…
A simple power bank with bought PCB and 2170 cells. I used the BAK N21700CG and LG M50 cells and a BMS/PCM PCB from Aliexpress (search term: QC4.0 QC3.0 LED Dual USB 5V 4.5A 22.5W Micro/Type-C USB Mobile Power Bank 18650). There were also…
This is a cable door for can bus(mellow fly sb2040). This is still a work in progress, but am uploading current step and stl for anyone to modify. There is a version already on printables for a 30x30x7 fan, but most people would have…
PCB holder by Garage Make Zone The presented PCB mounting stand guarantees a stable and stationary position of the PCB. In everyday use, this means that even precise soldering of small electronic components is not a problem. In addition,…
The PCB Workstation with Needle Probes is a highly versatile tool for your electronic laboratory. Equipped with crane arms and high-quality stainless steel needles, this tool allows making precise and stable connections to the components…
Nothing fancy, just a wider version of the original din clip (4mm wider)
Martyr pour la fabrication des cartes imprimées < 70 x 100 (vibrations importantes au delà) Bride d'angle HOME, coin de serrage et T-Slot 10 2 x écrous carrés M4 DIN 562 7x7x2.2 1 x Vis CHC DIN 912 M4x30 1 x Vis CHC DIN 912 M4x10 Bride de…
Hello everyone! My apologies to those metric people around the globe, but this project is in imperial units. I am not opposed to metric at all, but all the material I used in this project are those items I already had on hand. Some time…
3D multimaterial model of an Arduino Uno board. Made by two parts: an STL containing the conductive parts (what would be the copper in a standard PCB) and an stl containing the dielettric ("the board"). The model is complete of drills and…
I found this awesome PCB holder but sadly it used imperial standards so I decided to make it metric as well as making some minor improvements to the base to save some material. You will need to print two bases, four of the small knobs,…
This circuit board holder makes it easier to work on circuit boards. Be it for soldering or taking measurements. The circuit board is clamped with one or more holders. A spring is used to generate the necessary force. The holder itself is…
Oscilloscope probe holders are stupid expensive, and are just 2/3rds of a tripod. So why not print a dead-simple version and call it a day? I made these to be just about as simple as possible and as widely-applicable as possible. The…
Nastavitelné parametry umožnují přizpůsobení modelu. Počet nožek k PCB a jejich poloha atd… Použitá knihovna přiložena. Koukněte i na mé další modely .
Another case to give your pcb from the Discord-Server of https://ahoydtu.de a home. This version is for the longer NRF antenna which protrudes slightly above the board. The USB connector sits a little deeper due to the longer housing.The…
